Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753064Ab1DSOow (ORCPT ); Tue, 19 Apr 2011 10:44:52 -0400 Received: from mail-iy0-f174.google.com ([209.85.210.174]:53892 "EHLO mail-iy0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753005Ab1DSOou convert rfc822-to-8bit (ORCPT ); Tue, 19 Apr 2011 10:44:50 -0400 MIME-Version: 1.0 In-Reply-To: <20110419145303.111aead7@endymion.delvare> References: <20110419145303.111aead7@endymion.delvare> From: Grant Likely Date: Tue, 19 Apr 2011 08:44:29 -0600 X-Google-Sender-Auth: TGhSOfpg66QajCw-KYOxrmJ8BdM Message-ID: Subject: Re: [PATCH] gpio: New driver for the Intel 82801 (ICH) GPIO pins To: Jean Delvare Cc: LKML Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19729 Lines: 527 On Tue, Apr 19, 2011 at 6:53 AM, Jean Delvare wrote: > I need this to handle SMBus multiplexing on my Asus Z8NA-D6 board. It > has an ICH10, I've added support for older ICH chips in case someone > needs it, as it was relatively simply to do that. > > Signed-off-by: Jean Delvare > Cc: Grant Likely > --- > Note 1: On early ICH chips, some pins are exclusively inputs or > outputs. The driver doesn't currently enforce this. I'm not at all concerned about this. Users *must* know what a pin is when they start fiddling with it. If you ask a pin to do something that it cannot do, then it just isn't going to work. There's no real point in trying to enforce any behaviour in the API. > > Note 2: I'm not yet sure if we want a module alias for this driver. > Many systems have the device but only a few of them will need the > driver (and an ACPI resource conflict will be reported for many > others, especially laptops I suspect.) So it might make more sense to > let consumer drivers request the i801_gpio driver as needed (which they > should do anyway, as you can't assume udev is always up and running on > all systems.) > > Note 3: This is my first GPIO driver, so while it works fine for me, it > might not be perfect. I welcome comments on how to improve it. Your timing is impeccable. You're getting caught up in the big gpio driver consolidation. :-) Most gpio drivers end up looking pretty darn similar. Instead of writing the same types of drivers over and over again, the new approach is to try and consolidate the mmio drivers down to using basic_mmio_gpio.c. In this particular case, you've got a PCI device which looks to be going into config space to get some information about how the chip is layed out. What I would do is keep your existing pci probe & remove hooks, but use them to create and register child basic_mmio_gpio platform_devices for each gpio bank. g. > > ?drivers/gpio/Kconfig ? ? | ? ?7 > ?drivers/gpio/Makefile ? ?| ? ?1 > ?drivers/gpio/i801_gpio.c | ?432 ++++++++++++++++++++++++++++++++++++++++++++++ > ?3 files changed, 440 insertions(+) > > --- linux-2.6.39-rc3.orig/drivers/gpio/Kconfig ?2011-04-18 19:41:51.000000000 +0200 > +++ linux-2.6.39-rc3/drivers/gpio/Kconfig ? ? ? 2011-04-18 22:36:41.000000000 +0200 > @@ -322,6 +322,13 @@ config GPIO_BT8XX > > ? ? ? ? ?If unsure, say N. > > +config GPIO_I801 > + ? ? ? tristate "Intel 82801 (ICH) GPIO" > + ? ? ? depends on PCI > + ? ? ? help > + ? ? ? ? This driver is for the GPIO pins of Intel 82801 south bridges > + ? ? ? ? (aka ICH). > + > ?config GPIO_LANGWELL > ? ? ? ?bool "Intel Langwell/Penwell GPIO support" > ? ? ? ?depends on PCI && X86 > --- linux-2.6.39-rc3.orig/drivers/gpio/Makefile 2011-04-18 19:41:51.000000000 +0200 > +++ linux-2.6.39-rc3/drivers/gpio/Makefile ? ? ?2011-04-18 22:36:41.000000000 +0200 > @@ -11,6 +11,7 @@ obj-$(CONFIG_GPIOLIB) ? ? ? ? += gpiolib.o > ?obj-$(CONFIG_GPIO_ADP5520) ? ? += adp5520-gpio.o > ?obj-$(CONFIG_GPIO_ADP5588) ? ? += adp5588-gpio.o > ?obj-$(CONFIG_GPIO_BASIC_MMIO) ?+= basic_mmio_gpio.o > +obj-$(CONFIG_GPIO_I801) ? ? ? ? ? ? ? ?+= i801_gpio.o > ?obj-$(CONFIG_GPIO_LANGWELL) ? ?+= langwell_gpio.o > ?obj-$(CONFIG_GPIO_MAX730X) ? ? += max730x.o > ?obj-$(CONFIG_GPIO_MAX7300) ? ? += max7300.o > --- /dev/null ? 1970-01-01 00:00:00.000000000 +0000 > +++ linux-2.6.39-rc3/drivers/gpio/i801_gpio.c ? 2011-04-19 13:55:25.000000000 +0200 > @@ -0,0 +1,432 @@ > +/* > + * Linux kernel driver for the Intel 82801 GPIO pins > + * Copyright (C) 2011 Jean Delvare > + * > + * This program is free software; you can redistribute it and/or modify > + * it under the terms of the GNU General Public License as published by > + * the Free Software Foundation; version 2 of the License. > + * > + * This program is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. ?See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public License > + * along with this program; if not, write to the Free Software > + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. > + */ > + > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > +#include > + > +static int force; > +module_param(force, int, 0444); > +MODULE_PARM_DESC(force, "Forcibly enable access to GPIO"); > + > +enum chips { ICH2, ICH4, ICH6, ICH10_CORP }; > + > +/* Register definitions */ > +static const u8 REG_GPIO_USE_SEL[3] ? ?= { 0x00, 0x30, 0x40 }; > +static const u8 REG_GP_IO_SEL[3] ? ? ? = { 0x04, 0x34, 0x44 }; > +static const u8 REG_GP_LVL[3] ? ? ? ? ?= { 0x0C, 0x38, 0x48 }; > + > +/** > + * struct i801_gpio_data - 82801 GPIO private data > + * @base: ? ? ? ? ? ? ?Base I/O port > + * @io_size: ? ? ? ? ? I/O region size (64 or 128) > + * @gpio: ? ? ? ? ? ? ?Data for GPIO infrastructure > + * @lock: ? ? ? ? ? ? ?Mutex to serialize read-modify-write cycles > + */ > +struct i801_gpio_data { > + ? ? ? u32 base; > + ? ? ? u32 io_size; > + ? ? ? u32 use_sel[3]; > + ? ? ? struct gpio_chip gpio; > + ? ? ? struct mutex lock; > +}; > + > +static int i801_gpio_request(struct gpio_chip *gpio, unsigned nr) > +{ > + ? ? ? struct i801_gpio_data *data; > + ? ? ? int group = nr >> 5; > + > + ? ? ? data = container_of(gpio, struct i801_gpio_data, gpio); > + ? ? ? nr &= 0x1f; > + > + ? ? ? if (data->use_sel[group] & BIT(nr)) > + ? ? ? ? ? ? ? return 0; > + ? ? ? else > + ? ? ? ? ? ? ? return -EINVAL; > +} > + > +static void i801_gpio_set(struct gpio_chip *gpio, unsigned nr, int val) > +{ > + ? ? ? struct i801_gpio_data *data; > + ? ? ? int group = nr >> 5; > + ? ? ? u32 reg_val; > + > + ? ? ? data = container_of(gpio, struct i801_gpio_data, gpio); > + ? ? ? nr &= 0x1f; > + > + ? ? ? mutex_lock(&data->lock); > + ? ? ? reg_val = inl(data->base + REG_GP_LVL[group]); > + ? ? ? if (val) > + ? ? ? ? ? ? ? reg_val |= BIT(nr); > + ? ? ? else > + ? ? ? ? ? ? ? reg_val &= ~BIT(nr); > + ? ? ? outl(reg_val, data->base + REG_GP_LVL[group]); > + ? ? ? mutex_unlock(&data->lock); > +} > + > +static int i801_gpio_get(struct gpio_chip *gpio, unsigned nr) > +{ > + ? ? ? struct i801_gpio_data *data; > + ? ? ? int group = nr >> 5; > + > + ? ? ? data = container_of(gpio, struct i801_gpio_data, gpio); > + ? ? ? nr &= 0x1f; > + > + ? ? ? return (inl(data->base + REG_GP_LVL[group]) >> nr) & 1; > +} > + > +static int i801_gpio_direction_output(struct gpio_chip *gpio, unsigned nr, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? int val) > +{ > + ? ? ? struct i801_gpio_data *data; > + ? ? ? int group = nr >> 5; > + ? ? ? u32 reg_val; > + > + ? ? ? data = container_of(gpio, struct i801_gpio_data, gpio); > + ? ? ? nr &= 0x1f; > + > + ? ? ? mutex_lock(&data->lock); > + ? ? ? reg_val = inl(data->base + REG_GP_IO_SEL[group]); > + ? ? ? reg_val &= ~BIT(nr); > + ? ? ? outl(reg_val, data->base + REG_GP_IO_SEL[group]); > + > + ? ? ? reg_val = inl(data->base + REG_GP_LVL[group]); > + ? ? ? if (val) > + ? ? ? ? ? ? ? reg_val |= BIT(nr); > + ? ? ? else > + ? ? ? ? ? ? ? reg_val &= ~BIT(nr); > + ? ? ? outl(reg_val, data->base + REG_GP_LVL[group]); > + ? ? ? mutex_unlock(&data->lock); > + > + ? ? ? return 0; > +} > + > +static int i801_gpio_direction_input(struct gpio_chip *gpio, unsigned nr) > +{ > + ? ? ? struct i801_gpio_data *data; > + ? ? ? int group = nr >> 5; > + ? ? ? u32 reg_val; > + > + ? ? ? data = container_of(gpio, struct i801_gpio_data, gpio); > + ? ? ? nr &= 0x1f; > + > + ? ? ? mutex_lock(&data->lock); > + ? ? ? reg_val = inl(data->base + REG_GP_IO_SEL[group]); > + ? ? ? reg_val |= BIT(nr); > + ? ? ? outl(reg_val, data->base + REG_GP_IO_SEL[group]); > + ? ? ? mutex_unlock(&data->lock); > + > + ? ? ? return 0; > +} > + > +static void __devinit i801_gpio_setup(struct gpio_chip *gpio, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? struct device *dev, int ngpio) > +{ > + ? ? ? gpio->label = "i801_gpio"; > + ? ? ? gpio->dev = dev; > + ? ? ? gpio->owner = THIS_MODULE; > + ? ? ? gpio->request = i801_gpio_request; > + ? ? ? gpio->direction_input = i801_gpio_direction_input; > + ? ? ? gpio->get = i801_gpio_get; > + ? ? ? gpio->direction_output = i801_gpio_direction_output; > + ? ? ? gpio->set = i801_gpio_set; > + ? ? ? gpio->base = -1; > + ? ? ? gpio->ngpio = ngpio; > +} > + > +/* > + * On the ICH/ICH0, ICH3, ICH4 and ICH5, some selection bits control more > + * than one GPIO. > + */ > +static void __devinit i801_gpio_sel_fixup(struct i801_gpio_data *data, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? u32 device) > +{ > + ? ? ? switch (device) { > + ? ? ? case PCI_DEVICE_ID_INTEL_82801AA_0: > + ? ? ? case PCI_DEVICE_ID_INTEL_82801AB_0: > + ? ? ? case PCI_DEVICE_ID_INTEL_82801CA_0: > + ? ? ? case PCI_DEVICE_ID_INTEL_82801CA_12: > + ? ? ? case PCI_DEVICE_ID_INTEL_82801DB_0: > + ? ? ? case PCI_DEVICE_ID_INTEL_82801DB_12: > + ? ? ? case PCI_DEVICE_ID_INTEL_82801EB_0: > + ? ? ? ? ? ? ? if (data->use_sel[0] & BIT(0)) > + ? ? ? ? ? ? ? ? ? ? ? data->use_sel[0] |= BIT(16); > + ? ? ? ? ? ? ? if (data->use_sel[0] & BIT(1)) > + ? ? ? ? ? ? ? ? ? ? ? data->use_sel[0] |= BIT(17); > + ? ? ? ? ? ? ? if (data->use_sel[0] & BIT(27)) > + ? ? ? ? ? ? ? ? ? ? ? data->use_sel[0] |= BIT(28); > + ? ? ? ? ? ? ? break; > + ? ? ? } > +} > + > +static __devinitdata > +const struct { > + ? ? ? int ngroup; > + ? ? ? int io_size; > + ? ? ? u8 reg_gpiobase; > + ? ? ? u8 reg_gc; > +} i801_gpio_cfg[] = { > + ? ? ? [ICH2] ? ? ? ? ?= { 1, ?64, 0x58, 0x5C }, > + ? ? ? [ICH4] ? ? ? ? ?= { 2, ?64, 0x58, 0x5C }, > + ? ? ? [ICH6] ? ? ? ? ?= { 2, ?64, 0x48, 0x4C }, > + ? ? ? [ICH10_CORP] ? ?= { 3, 128, 0x48, 0x4C }, > +}; > + > +static void __devinit i801_gpio_print_state(struct i801_gpio_data *data, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? struct device *dev, int ngroup) > +{ > + ? ? ? int i, group; > + ? ? ? u32 io_sel, lvl; > + > + ? ? ? dev_dbg(dev, "Current state of GPIO pins:\n"); > + ? ? ? for (group = 0; group < ngroup; group++) { > + ? ? ? ? ? ? ? io_sel = inl(data->base + REG_GP_IO_SEL[group]); > + ? ? ? ? ? ? ? lvl = inl(data->base + REG_GP_LVL[group]); > + > + ? ? ? ? ? ? ? for (i = 0; i < 32; i++) { > + ? ? ? ? ? ? ? ? ? ? ? if (!(data->use_sel[group] & BIT(i))) > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? continue; > + > + ? ? ? ? ? ? ? ? ? ? ? dev_dbg(dev, "GPIO%d: %s, level %d\n", group * 32 + i, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? io_sel & BIT(i) ? "input" : "output", > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? !!(lvl & BIT(i))); > + ? ? ? ? ? ? ? } > + ? ? ? } > +} > + > +static int __devinit i801_gpio_probe(struct pci_dev *pdev, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?const struct pci_device_id *id) > +{ > + ? ? ? struct i801_gpio_data *data; > + ? ? ? u32 gpiobase; > + ? ? ? u8 gc; > + ? ? ? int type = id->driver_data; > + ? ? ? int group, ngroup, err; > + > + ? ? ? data = kzalloc(sizeof(struct i801_gpio_data), GFP_KERNEL); > + ? ? ? if (!data) > + ? ? ? ? ? ? ? return -ENOMEM; > + > + ? ? ? err = pci_enable_device(pdev); > + ? ? ? if (err) { > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "Failed to enable device (%d)\n", err); > + ? ? ? ? ? ? ? goto err_free; > + ? ? ? } > + > + ? ? ? /* Get the base I/O address */ > + ? ? ? err = pci_read_config_dword(pdev, i801_gpio_cfg[type].reg_gpiobase, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? &gpiobase); > + ? ? ? if (err) { > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "Couldn't read %s value (%d)\n", > + ? ? ? ? ? ? ? ? ? ? ? "GPIOBASE", err); > + ? ? ? ? ? ? ? goto err_disable; > + ? ? ? } > + ? ? ? data->base = gpiobase & ~BIT(0); > + ? ? ? if (!data->base) { > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "GPIOBASE not set\n"); > + ? ? ? ? ? ? ? err = -ENODEV; > + ? ? ? ? ? ? ? goto err_disable; > + ? ? ? } > + > + ? ? ? /* Check configuration */ > + ? ? ? err = pci_read_config_byte(pdev, i801_gpio_cfg[type].reg_gc, &gc); > + ? ? ? if (err) { > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "Couldn't read %s value (%d)\n", > + ? ? ? ? ? ? ? ? ? ? ? "GC", err); > + ? ? ? ? ? ? ? goto err_disable; > + ? ? ? } > + ? ? ? if (gc & BIT(0)) { > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "GPIO function is %s\n", "locked"); > + ? ? ? ? ? ? ? err = -EBUSY; > + ? ? ? ? ? ? ? goto err_disable; > + ? ? ? } > + ? ? ? if (!(gc & BIT(4))) { > + ? ? ? ? ? ? ? if (!force) { > + ? ? ? ? ? ? ? ? ? ? ? dev_err(&pdev->dev, "GPIO function is %s\n", > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "disabled"); > + ? ? ? ? ? ? ? ? ? ? ? err = -ENODEV; > + ? ? ? ? ? ? ? ? ? ? ? goto err_disable; > + ? ? ? ? ? ? ? } > + > + ? ? ? ? ? ? ? gc |= BIT(4); > + ? ? ? ? ? ? ? err = pci_write_config_byte(pdev, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? i801_gpio_cfg[type].reg_gc, gc); > + ? ? ? ? ? ? ? if (err) { > + ? ? ? ? ? ? ? ? ? ? ? dev_err(&pdev->dev, > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? "Failed to enable GPIO function (%d)\n", > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? err); > + ? ? ? ? ? ? ? ? ? ? ? err = -ENODEV; > + ? ? ? ? ? ? ? ? ? ? ? goto err_disable; > + ? ? ? ? ? ? ? } > + ? ? ? ? ? ? ? dev_info(&pdev->dev, "Enabling GPIO function\n"); > + ? ? ? } > + > + ? ? ? /* > + ? ? ? ?* "Corporate" incarnations of the ICH10 have an I/O region of size > + ? ? ? ?* 128 and 73 GPIO pins. Others ("consumer") have an I/O region of > + ? ? ? ?* size only 64 and 61 GPIO pins, as the ICH6, ICH7, ICH8 and ICH9 > + ? ? ? ?* had. > + ? ? ? ?*/ > + ? ? ? data->io_size = i801_gpio_cfg[type].io_size; > + ? ? ? if (!force) { > + ? ? ? ? ? ? ? err = acpi_check_region(data->base, data->io_size, "i801_gpio"); > + ? ? ? ? ? ? ? if (err) > + ? ? ? ? ? ? ? ? ? ? ? goto err_disable; > + ? ? ? } > + ? ? ? if (!request_region(data->base, data->io_size, "i801_gpio")) { > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "Failed to request I/O ports (%d)", err); > + ? ? ? ? ? ? ? err = -EBUSY; > + ? ? ? ? ? ? ? goto err_disable; > + ? ? ? } > + > + ? ? ? ngroup = i801_gpio_cfg[type].ngroup; > + ? ? ? for (group = 0; group < ngroup; group++) > + ? ? ? ? ? ? ? data->use_sel[group] = inl(data->base + > + ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ? ?REG_GPIO_USE_SEL[group]); > + ? ? ? i801_gpio_sel_fixup(data, id->device); > + ? ? ? mutex_init(&data->lock); > + > + ? ? ? i801_gpio_setup(&data->gpio, &pdev->dev, ngroup * 32); > + ? ? ? i801_gpio_print_state(data, &pdev->dev, ngroup); > + > + ? ? ? pci_set_drvdata(pdev, data); > + ? ? ? err = gpiochip_add(&data->gpio); > + ? ? ? if (err) { > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "Failed to register GPIO (%d)\n", err); > + ? ? ? ? ? ? ? goto err_release; > + ? ? ? } > + > + ? ? ? return 0; > + > + err_release: > + ? ? ? release_region(data->base, data->io_size); > + > + err_disable: > + ? ? ? pci_disable_device(pdev); > + > + err_free: > + ? ? ? kfree(data); > + ? ? ? return err; > +} > + > +static void __devexit i801_gpio_remove(struct pci_dev *pdev) > +{ > + ? ? ? struct i801_gpio_data *data = pci_get_drvdata(pdev); > + ? ? ? int err; > + > + ? ? ? err = gpiochip_remove(&data->gpio); > + ? ? ? if (err) > + ? ? ? ? ? ? ? dev_err(&pdev->dev, "Failed to unregister GPIO (%d)\n", err); > + > + ? ? ? release_region(data->base, data->io_size); > + ? ? ? pci_disable_device(pdev); > + ? ? ? kfree(data); > +} > + > +/* driver_data is the number of GPIO groups */ > +static DEFINE_PCI_DEVICE_TABLE(i801_gpio_pcidev_id) = { > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AA_0), > + ? ? ? ? .driver_data = ICH2 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801AB_0), > + ? ? ? ? .driver_data = ICH2 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_0), > + ? ? ? ? .driver_data = ICH2 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801BA_10), > + ? ? ? ? .driver_data = ICH2 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_0), > + ? ? ? ? .driver_data = ICH4 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801CA_12), > + ? ? ? ? .driver_data = ICH4 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_0), > + ? ? ? ? .driver_data = ICH4 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801DB_12), > + ? ? ? ? .driver_data = ICH4 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82801EB_0), > + ? ? ? ? .driver_data = ICH4 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_0), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH6_1), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_0), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_1), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH7_31), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_0), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_1), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_2), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_3), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH8_4), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_1), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_2), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_4), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_5), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_7), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH9_8), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_0), > + ? ? ? ? .driver_data = ICH10_CORP }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_1), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_2), > + ? ? ? ? .driver_data = ICH6 }, > + ? ? ? { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_ICH10_3), > + ? ? ? ? .driver_data = ICH10_CORP }, > + ? ? ? { 0, } > +}; > +MODULE_DEVICE_TABLE(pci, i801_gpio_pcidev_id); > + > +static struct pci_driver i801_gpio_driver = { > + ? ? ? .name ? ? ? ? ? = "i801_gpio", > + ? ? ? .id_table ? ? ? = i801_gpio_pcidev_id, > + ? ? ? .probe ? ? ? ? ?= i801_gpio_probe, > + ? ? ? .remove ? ? ? ? = __devexit_p(i801_gpio_remove), > +}; > + > +static int __init i801_gpio_pci_init(void) > +{ > + ? ? ? return pci_register_driver(&i801_gpio_driver); > +} > +module_init(i801_gpio_pci_init); > + > +static void __exit i801_gpio_pci_exit(void) > +{ > + ? ? ? pci_unregister_driver(&i801_gpio_driver); > +} > +module_exit(i801_gpio_pci_exit); > + > +MODULE_AUTHOR("Jean Delvare "); > +MODULE_DESCRIPTION("Intel 82801 (ICH) GPIO driver"); > +MODULE_LICENSE("GPL"); > > > -- > Jean Delvare > -- Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/