Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753076Ab1DVUwL (ORCPT ); Fri, 22 Apr 2011 16:52:11 -0400 Received: from mga09.intel.com ([134.134.136.24]:61649 "EHLO mga09.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752081Ab1DVUwF (ORCPT ); Fri, 22 Apr 2011 16:52:05 -0400 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.64,255,1301900400"; d="scan'208";a="737201657" From: Mark Allyn To: linux-kernel@vger.kernel.org, greg@kroah.com, mark.a.allyn@intel.com, alan@linux.intel.com Subject: [PATCH 1/1] staging: sep: move to misc: sep: to move to mainline Date: Fri, 22 Apr 2011 13:50:49 -0700 Message-Id: <1303505449-25111-1-git-send-email-mark.a.allyn@intel.com> X-Mailer: git-send-email 1.7.0.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 235759 Lines: 7721 Signed-off-by: Mark Allyn --- drivers/misc/Kconfig | 1 + drivers/misc/Makefile | 1 + drivers/misc/sep/Kconfig | 10 + drivers/misc/sep/Makefile | 2 + drivers/misc/sep/TODO | 4 + drivers/misc/sep/sep_dev.h | 131 ++ drivers/misc/sep/sep_driver.c | 2928 ++++++++++++++++++++++++++++++ drivers/misc/sep/sep_driver_api.h | 215 +++ drivers/misc/sep/sep_driver_config.h | 243 +++ drivers/misc/sep/sep_driver_hw_defs.h | 233 +++ drivers/staging/Kconfig | 2 - drivers/staging/Makefile | 1 - drivers/staging/sep/Kconfig | 10 - drivers/staging/sep/Makefile | 2 - drivers/staging/sep/TODO | 4 - drivers/staging/sep/sep_dev.h | 131 -- drivers/staging/sep/sep_driver.c | 2928 ------------------------------ drivers/staging/sep/sep_driver_api.h | 215 --- drivers/staging/sep/sep_driver_config.h | 243 --- drivers/staging/sep/sep_driver_hw_defs.h | 233 --- 20 files changed, 3768 insertions(+), 3769 deletions(-) create mode 100644 drivers/misc/sep/Kconfig create mode 100644 drivers/misc/sep/Makefile create mode 100644 drivers/misc/sep/TODO create mode 100644 drivers/misc/sep/sep_dev.h create mode 100644 drivers/misc/sep/sep_driver.c create mode 100644 drivers/misc/sep/sep_driver_api.h create mode 100644 drivers/misc/sep/sep_driver_config.h create mode 100644 drivers/misc/sep/sep_driver_hw_defs.h delete mode 100644 drivers/staging/sep/Kconfig delete mode 100644 drivers/staging/sep/Makefile delete mode 100644 drivers/staging/sep/TODO delete mode 100644 drivers/staging/sep/sep_dev.h delete mode 100644 drivers/staging/sep/sep_driver.c delete mode 100644 drivers/staging/sep/sep_driver_api.h delete mode 100644 drivers/staging/sep/sep_driver_config.h delete mode 100644 drivers/staging/sep/sep_driver_hw_defs.h diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 4e007c6..3dd9c88 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -481,5 +481,6 @@ source "drivers/misc/cb710/Kconfig" source "drivers/misc/iwmc3200top/Kconfig" source "drivers/misc/ti-st/Kconfig" source "drivers/misc/lis3lv02d/Kconfig" +source "drivers/misc/sep/Kconfig" endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index f546860..1acdc50 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -44,3 +44,4 @@ obj-$(CONFIG_PCH_PHUB) += pch_phub.o obj-y += ti-st/ obj-$(CONFIG_AB8500_PWM) += ab8500-pwm.o obj-y += lis3lv02d/ +obj-$(CONFIG_DX_SEP) += sep/ diff --git a/drivers/misc/sep/Kconfig b/drivers/misc/sep/Kconfig new file mode 100644 index 0000000..92bf166 --- /dev/null +++ b/drivers/misc/sep/Kconfig @@ -0,0 +1,10 @@ +config DX_SEP + tristate "Discretix SEP driver" + depends on PCI + help + Discretix SEP driver; used for the security processor subsystem + on bard the Intel Mobile Internet Device. + + The driver's name is sep_driver. + + If unsure, select N. diff --git a/drivers/misc/sep/Makefile b/drivers/misc/sep/Makefile new file mode 100644 index 0000000..628d5f9 --- /dev/null +++ b/drivers/misc/sep/Makefile @@ -0,0 +1,2 @@ +obj-$(CONFIG_DX_SEP) := sep_driver.o + diff --git a/drivers/misc/sep/TODO b/drivers/misc/sep/TODO new file mode 100644 index 0000000..8f3b878 --- /dev/null +++ b/drivers/misc/sep/TODO @@ -0,0 +1,4 @@ +Todo's so far (from Alan Cox) +- Check whether it can be plugged into any of the kernel crypto API + interfaces - Crypto API 'glue' is still not ready to submit +- Clean up un-needed debug prints - Started to work on this diff --git a/drivers/misc/sep/sep_dev.h b/drivers/misc/sep/sep_dev.h new file mode 100644 index 0000000..696ab0d --- /dev/null +++ b/drivers/misc/sep/sep_dev.h @@ -0,0 +1,131 @@ +#ifndef __SEP_DEV_H__ +#define __SEP_DEV_H__ + +/* + * + * sep_dev.h - Security Processor Device Structures + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES + * 2010.09.14 upgrade to Medfield + */ + +struct sep_device { + /* pointer to pci dev */ + struct pci_dev *pdev; + + /* character device file */ + struct cdev sep_cdev; + struct cdev sep_daemon_cdev; + struct cdev sep_singleton_cdev; + + /* devices (using misc dev) */ + struct miscdevice miscdev_sep; + struct miscdevice miscdev_singleton; + struct miscdevice miscdev_daemon; + + /* major / minor numbers of device */ + dev_t sep_devno; + dev_t sep_daemon_devno; + dev_t sep_singleton_devno; + + struct mutex sep_mutex; + struct mutex ioctl_mutex; + spinlock_t snd_rply_lck; + + /* flags to indicate use and lock status of sep */ + u32 pid_doing_transaction; + unsigned long in_use_flags; + + /* request daemon alread open */ + unsigned long request_daemon_open; + + /* 1 = Moorestown; 0 = Medfield */ + int mrst; + + /* address of the shared memory allocated during init for SEP driver + (coherent alloc) */ + dma_addr_t shared_bus; + size_t shared_size; + void *shared_addr; + + /* start address of the access to the SEP registers from driver */ + dma_addr_t reg_physical_addr; + dma_addr_t reg_physical_end; + void __iomem *reg_addr; + + /* wait queue head (event) of the driver */ + wait_queue_head_t event; + wait_queue_head_t event_request_daemon; + wait_queue_head_t event_mmap; + + struct sep_caller_id_entry + caller_id_table[SEP_CALLER_ID_TABLE_NUM_ENTRIES]; + + /* access flag for singleton device */ + unsigned long singleton_access_flag; + + /* transaction counter that coordinates the + transactions between SEP and HOST */ + unsigned long send_ct; + /* counter for the messages from sep */ + unsigned long reply_ct; + /* counter for the number of bytes allocated in the pool for the + current transaction */ + long data_pool_bytes_allocated; + + u32 num_of_data_allocations; + + /* number of the lli tables created in the current transaction */ + u32 num_lli_tables_created; + + /* number of data control blocks */ + u32 nr_dcb_creat; + + struct sep_dma_resource dma_res_arr[SEP_MAX_NUM_SYNC_DMA_OPS]; + +}; + +static inline void sep_write_reg(struct sep_device *dev, int reg, u32 value) +{ + void __iomem *addr = dev->reg_addr + reg; + writel(value, addr); +} + +static inline u32 sep_read_reg(struct sep_device *dev, int reg) +{ + void __iomem *addr = dev->reg_addr + reg; + return readl(addr); +} + +/* wait for SRAM write complete(indirect write */ +static inline void sep_wait_sram_write(struct sep_device *dev) +{ + u32 reg_val; + do { + reg_val = sep_read_reg(dev, HW_SRAM_DATA_READY_REG_ADDR); + } while (!(reg_val & 1)); +} + + +#endif diff --git a/drivers/misc/sep/sep_driver.c b/drivers/misc/sep/sep_driver.c new file mode 100644 index 0000000..890eede --- /dev/null +++ b/drivers/misc/sep/sep_driver.c @@ -0,0 +1,2928 @@ +/* + * + * sep_driver.c - Security Processor Driver main group of functions + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES: + * + * 2009.06.26 Initial publish + * 2010.09.14 Upgrade to Medfield + * + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "sep_driver_hw_defs.h" +#include "sep_driver_config.h" +#include "sep_driver_api.h" +#include "sep_dev.h" + +/*---------------------------------------- + DEFINES +-----------------------------------------*/ + +#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000 + +/*-------------------------------------------- + GLOBAL variables +--------------------------------------------*/ + +/* Keep this a single static object for now to keep the conversion easy */ + +static struct sep_device *sep_dev; + +/** + * sep_dump_message - dump the message that is pending + * @sep: SEP device + */ +static void sep_dump_message(struct sep_device *sep) +{ + int count; + u32 *p = sep->shared_addr; + for (count = 0; count < 12 * 4; count += 4) + dev_dbg(&sep->pdev->dev, "Word %d of the message is %x\n", + count, *p++); +} + +/** + * sep_map_and_alloc_shared_area - allocate shared block + * @sep: security processor + * @size: size of shared area + */ +static int sep_map_and_alloc_shared_area(struct sep_device *sep) +{ + sep->shared_addr = dma_alloc_coherent(&sep->pdev->dev, + sep->shared_size, + &sep->shared_bus, GFP_KERNEL); + + if (!sep->shared_addr) { + dev_warn(&sep->pdev->dev, + "shared memory dma_alloc_coherent failed\n"); + return -ENOMEM; + } + dev_dbg(&sep->pdev->dev, + "shared_addr %zx bytes @%p (bus %llx)\n", + sep->shared_size, sep->shared_addr, + (unsigned long long)sep->shared_bus); + return 0; +} + +/** + * sep_unmap_and_free_shared_area - free shared block + * @sep: security processor + */ +static void sep_unmap_and_free_shared_area(struct sep_device *sep) +{ + dma_free_coherent(&sep->pdev->dev, sep->shared_size, + sep->shared_addr, sep->shared_bus); +} + +/** + * sep_shared_bus_to_virt - convert bus/virt addresses + * @sep: pointer to struct sep_device + * @bus_address: address to convert + * + * Returns virtual address inside the shared area according + * to the bus address. + */ +static void *sep_shared_bus_to_virt(struct sep_device *sep, + dma_addr_t bus_address) +{ + return sep->shared_addr + (bus_address - sep->shared_bus); +} + +/** + * open function for the singleton driver + * @inode_ptr struct inode * + * @file_ptr struct file * + * + * Called when the user opens the singleton device interface + */ +static int sep_singleton_open(struct inode *inode_ptr, struct file *file_ptr) +{ + struct sep_device *sep; + + /* + * Get the SEP device structure and use it for the + * private_data field in filp for other methods + */ + sep = sep_dev; + + file_ptr->private_data = sep; + + if (test_and_set_bit(0, &sep->singleton_access_flag)) + return -EBUSY; + return 0; +} + +/** + * sep_open - device open method + * @inode: inode of SEP device + * @filp: file handle to SEP device + * + * Open method for the SEP device. Called when userspace opens + * the SEP device node. + * + * Returns zero on success otherwise an error code. + */ +static int sep_open(struct inode *inode, struct file *filp) +{ + struct sep_device *sep; + + /* + * Get the SEP device structure and use it for the + * private_data field in filp for other methods + */ + sep = sep_dev; + filp->private_data = sep; + + /* Anyone can open; locking takes place at transaction level */ + return 0; +} + +/** + * sep_singleton_release - close a SEP singleton device + * @inode: inode of SEP device + * @filp: file handle being closed + * + * Called on the final close of a SEP device. As the open protects against + * multiple simultaenous opens that means this method is called when the + * final reference to the open handle is dropped. + */ +static int sep_singleton_release(struct inode *inode, struct file *filp) +{ + struct sep_device *sep = filp->private_data; + + clear_bit(0, &sep->singleton_access_flag); + return 0; +} + +/** + * sep_request_daemonopen - request daemon open method + * @inode: inode of SEP device + * @filp: file handle to SEP device + * + * Open method for the SEP request daemon. Called when + * request daemon in userspace opens the SEP device node. + * + * Returns zero on success otherwise an error code. + */ +static int sep_request_daemon_open(struct inode *inode, struct file *filp) +{ + struct sep_device *sep = sep_dev; + int error = 0; + + filp->private_data = sep; + + /* There is supposed to be only one request daemon */ + if (test_and_set_bit(0, &sep->request_daemon_open)) + error = -EBUSY; + return error; +} + +/** + * sep_request_daemon_release - close a SEP daemon + * @inode: inode of SEP device + * @filp: file handle being closed + * + * Called on the final close of a SEP daemon. + */ +static int sep_request_daemon_release(struct inode *inode, struct file *filp) +{ + struct sep_device *sep = filp->private_data; + + dev_dbg(&sep->pdev->dev, "Request daemon release for pid %d\n", + current->pid); + + /* Clear the request_daemon_open flag */ + clear_bit(0, &sep->request_daemon_open); + return 0; +} + +/** + * sep_req_daemon_send_reply_command_handler - poke the SEP + * @sep: struct sep_device * + * + * This function raises interrupt to SEPm that signals that is has a + * new command from HOST + */ +static int sep_req_daemon_send_reply_command_handler(struct sep_device *sep) +{ + unsigned long lck_flags; + + sep_dump_message(sep); + + /* Counters are lockable region */ + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + sep->send_ct++; + sep->reply_ct++; + + /* Send the interrupt to SEP */ + sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep->send_ct); + sep->send_ct++; + + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + dev_dbg(&sep->pdev->dev, + "sep_req_daemon_send_reply send_ct %lx reply_ct %lx\n", + sep->send_ct, sep->reply_ct); + + return 0; +} + + +/** + * sep_free_dma_table_data_handler - free DMA table + * @sep: pointere to struct sep_device + * + * Handles the request to free DMA table for synchronic actions + */ +static int sep_free_dma_table_data_handler(struct sep_device *sep) +{ + int count; + int dcb_counter; + /* Pointer to the current dma_resource struct */ + struct sep_dma_resource *dma; + + for (dcb_counter = 0; dcb_counter < sep->nr_dcb_creat; dcb_counter++) { + dma = &sep->dma_res_arr[dcb_counter]; + + /* Unmap and free input map array */ + if (dma->in_map_array) { + for (count = 0; count < dma->in_num_pages; count++) { + dma_unmap_page(&sep->pdev->dev, + dma->in_map_array[count].dma_addr, + dma->in_map_array[count].size, + DMA_TO_DEVICE); + } + kfree(dma->in_map_array); + } + + /* Unmap output map array, DON'T free it yet */ + if (dma->out_map_array) { + for (count = 0; count < dma->out_num_pages; count++) { + dma_unmap_page(&sep->pdev->dev, + dma->out_map_array[count].dma_addr, + dma->out_map_array[count].size, + DMA_FROM_DEVICE); + } + kfree(dma->out_map_array); + } + + /* Free page cache for output */ + if (dma->in_page_array) { + for (count = 0; count < dma->in_num_pages; count++) { + flush_dcache_page(dma->in_page_array[count]); + page_cache_release(dma->in_page_array[count]); + } + kfree(dma->in_page_array); + } + + if (dma->out_page_array) { + for (count = 0; count < dma->out_num_pages; count++) { + if (!PageReserved(dma->out_page_array[count])) + SetPageDirty(dma->out_page_array[count]); + flush_dcache_page(dma->out_page_array[count]); + page_cache_release(dma->out_page_array[count]); + } + kfree(dma->out_page_array); + } + + /* Reset all the values */ + dma->in_page_array = NULL; + dma->out_page_array = NULL; + dma->in_num_pages = 0; + dma->out_num_pages = 0; + dma->in_map_array = NULL; + dma->out_map_array = NULL; + dma->in_map_num_entries = 0; + dma->out_map_num_entries = 0; + } + + sep->nr_dcb_creat = 0; + sep->num_lli_tables_created = 0; + + return 0; +} + +/** + * sep_request_daemon_mmap - maps the shared area to user space + * @filp: pointer to struct file + * @vma: pointer to vm_area_struct + * + * Called by the kernel when the daemon attempts an mmap() syscall + * using our handle. + */ +static int sep_request_daemon_mmap(struct file *filp, + struct vm_area_struct *vma) +{ + struct sep_device *sep = filp->private_data; + dma_addr_t bus_address; + int error = 0; + + if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) { + error = -EINVAL; + goto end_function; + } + + /* Get physical address */ + bus_address = sep->shared_bus; + + if (remap_pfn_range(vma, vma->vm_start, bus_address >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot)) { + + dev_warn(&sep->pdev->dev, "remap_page_range failed\n"); + error = -EAGAIN; + goto end_function; + } + +end_function: + return error; +} + +/** + * sep_request_daemon_poll - poll implementation + * @sep: struct sep_device * for current SEP device + * @filp: struct file * for open file + * @wait: poll_table * for poll + * + * Called when our device is part of a poll() or select() syscall + */ +static unsigned int sep_request_daemon_poll(struct file *filp, + poll_table *wait) +{ + u32 mask = 0; + /* GPR2 register */ + u32 retval2; + unsigned long lck_flags; + struct sep_device *sep = filp->private_data; + + poll_wait(filp, &sep->event_request_daemon, wait); + + dev_dbg(&sep->pdev->dev, "daemon poll: send_ct is %lx reply ct is %lx\n", + sep->send_ct, sep->reply_ct); + + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + /* Check if the data is ready */ + if (sep->send_ct == sep->reply_ct) { + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); + dev_dbg(&sep->pdev->dev, + "daemon poll: data check (GPR2) is %x\n", retval2); + + /* Check if PRINT request */ + if ((retval2 >> 30) & 0x1) { + dev_dbg(&sep->pdev->dev, "daemon poll: PRINTF request in\n"); + mask |= POLLIN; + goto end_function; + } + /* Check if NVS request */ + if (retval2 >> 31) { + dev_dbg(&sep->pdev->dev, "daemon poll: NVS request in\n"); + mask |= POLLPRI | POLLWRNORM; + } + } else { + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + dev_dbg(&sep->pdev->dev, + "daemon poll: no reply received; returning 0\n"); + mask = 0; + } +end_function: + return mask; +} + +/** + * sep_release - close a SEP device + * @inode: inode of SEP device + * @filp: file handle being closed + * + * Called on the final close of a SEP device. + */ +static int sep_release(struct inode *inode, struct file *filp) +{ + struct sep_device *sep = filp->private_data; + + dev_dbg(&sep->pdev->dev, "Release for pid %d\n", current->pid); + + mutex_lock(&sep->sep_mutex); + /* Is this the process that has a transaction open? + * If so, lets reset pid_doing_transaction to 0 and + * clear the in use flags, and then wake up sep_event + * so that other processes can do transactions + */ + if (sep->pid_doing_transaction == current->pid) { + clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags); + clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags); + sep_free_dma_table_data_handler(sep); + wake_up(&sep->event); + sep->pid_doing_transaction = 0; + } + + mutex_unlock(&sep->sep_mutex); + return 0; +} + +/** + * sep_mmap - maps the shared area to user space + * @filp: pointer to struct file + * @vma: pointer to vm_area_struct + * + * Called on an mmap of our space via the normal SEP device + */ +static int sep_mmap(struct file *filp, struct vm_area_struct *vma) +{ + dma_addr_t bus_addr; + struct sep_device *sep = filp->private_data; + unsigned long error = 0; + + /* Set the transaction busy (own the device) */ + wait_event_interruptible(sep->event, + test_and_set_bit(SEP_MMAP_LOCK_BIT, + &sep->in_use_flags) == 0); + + if (signal_pending(current)) { + error = -EINTR; + goto end_function_with_error; + } + /* + * The pid_doing_transaction indicates that this process + * now owns the facilities to performa a transaction with + * the SEP. While this process is performing a transaction, + * no other process who has the SEP device open can perform + * any transactions. This method allows more than one process + * to have the device open at any given time, which provides + * finer granularity for device utilization by multiple + * processes. + */ + mutex_lock(&sep->sep_mutex); + sep->pid_doing_transaction = current->pid; + mutex_unlock(&sep->sep_mutex); + + /* Zero the pools and the number of data pool alocation pointers */ + sep->data_pool_bytes_allocated = 0; + sep->num_of_data_allocations = 0; + + /* + * Check that the size of the mapped range is as the size of the message + * shared area + */ + if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) { + error = -EINVAL; + goto end_function_with_error; + } + + dev_dbg(&sep->pdev->dev, "shared_addr is %p\n", sep->shared_addr); + + /* Get bus address */ + bus_addr = sep->shared_bus; + + if (remap_pfn_range(vma, vma->vm_start, bus_addr >> PAGE_SHIFT, + vma->vm_end - vma->vm_start, vma->vm_page_prot)) { + dev_warn(&sep->pdev->dev, "remap_page_range failed\n"); + error = -EAGAIN; + goto end_function_with_error; + } + goto end_function; + +end_function_with_error: + /* Clear the bit */ + clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags); + mutex_lock(&sep->sep_mutex); + sep->pid_doing_transaction = 0; + mutex_unlock(&sep->sep_mutex); + + /* Raise event for stuck contextes */ + + wake_up(&sep->event); + +end_function: + return error; +} + +/** + * sep_poll - poll handler + * @filp: pointer to struct file + * @wait: pointer to poll_table + * + * Called by the OS when the kernel is asked to do a poll on + * a SEP file handle. + */ +static unsigned int sep_poll(struct file *filp, poll_table *wait) +{ + u32 mask = 0; + u32 retval = 0; + u32 retval2 = 0; + unsigned long lck_flags; + + struct sep_device *sep = filp->private_data; + + /* Am I the process that owns the transaction? */ + mutex_lock(&sep->sep_mutex); + if (current->pid != sep->pid_doing_transaction) { + dev_dbg(&sep->pdev->dev, "poll; wrong pid\n"); + mask = POLLERR; + mutex_unlock(&sep->sep_mutex); + goto end_function; + } + mutex_unlock(&sep->sep_mutex); + + /* Check if send command or send_reply were activated previously */ + if (!test_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) { + mask = POLLERR; + goto end_function; + } + + /* Add the event to the polling wait table */ + dev_dbg(&sep->pdev->dev, "poll: calling wait sep_event\n"); + + poll_wait(filp, &sep->event, wait); + + dev_dbg(&sep->pdev->dev, "poll: send_ct is %lx reply ct is %lx\n", + sep->send_ct, sep->reply_ct); + + /* Check if error occurred during poll */ + retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); + if (retval2 != 0x0) { + dev_warn(&sep->pdev->dev, "poll; poll error %x\n", retval2); + mask |= POLLERR; + goto end_function; + } + + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + + if (sep->send_ct == sep->reply_ct) { + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); + dev_dbg(&sep->pdev->dev, "poll: data ready check (GPR2) %x\n", + retval); + + /* Check if printf request */ + if ((retval >> 30) & 0x1) { + dev_dbg(&sep->pdev->dev, "poll: SEP printf request\n"); + wake_up(&sep->event_request_daemon); + goto end_function; + } + + /* Check if the this is SEP reply or request */ + if (retval >> 31) { + dev_dbg(&sep->pdev->dev, "poll: SEP request\n"); + wake_up(&sep->event_request_daemon); + } else { + dev_dbg(&sep->pdev->dev, "poll: normal return\n"); + /* In case it is again by send_reply_comand */ + clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags); + sep_dump_message(sep); + dev_dbg(&sep->pdev->dev, + "poll; SEP reply POLLIN | POLLRDNORM\n"); + mask |= POLLIN | POLLRDNORM; + } + } else { + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + dev_dbg(&sep->pdev->dev, + "poll; no reply received; returning mask of 0\n"); + mask = 0; + } + +end_function: + return mask; +} + +/** + * sep_time_address - address in SEP memory of time + * @sep: SEP device we want the address from + * + * Return the address of the two dwords in memory used for time + * setting. + */ +static u32 *sep_time_address(struct sep_device *sep) +{ + return sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES; +} + +/** + * sep_set_time - set the SEP time + * @sep: the SEP we are setting the time for + * + * Calculates time and sets it at the predefined address. + * Called with the SEP mutex held. + */ +static unsigned long sep_set_time(struct sep_device *sep) +{ + struct timeval time; + u32 *time_addr; /* Address of time as seen by the kernel */ + + + do_gettimeofday(&time); + + /* Set value in the SYSTEM MEMORY offset */ + time_addr = sep_time_address(sep); + + time_addr[0] = SEP_TIME_VAL_TOKEN; + time_addr[1] = time.tv_sec; + + dev_dbg(&sep->pdev->dev, "time.tv_sec is %lu\n", time.tv_sec); + dev_dbg(&sep->pdev->dev, "time_addr is %p\n", time_addr); + dev_dbg(&sep->pdev->dev, "sep->shared_addr is %p\n", sep->shared_addr); + + return time.tv_sec; +} + +/** + * sep_set_caller_id_handler - insert caller id entry + * @sep: SEP device + * @arg: pointer to struct caller_id_struct + * + * Inserts the data into the caller id table. Note that this function + * falls under the ioctl lock + */ +static int sep_set_caller_id_handler(struct sep_device *sep, unsigned long arg) +{ + void __user *hash; + int error = 0; + int i; + struct caller_id_struct command_args; + + for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) { + if (sep->caller_id_table[i].pid == 0) + break; + } + + if (i == SEP_CALLER_ID_TABLE_NUM_ENTRIES) { + dev_dbg(&sep->pdev->dev, "no more caller id entries left\n"); + dev_dbg(&sep->pdev->dev, "maximum number is %d\n", + SEP_CALLER_ID_TABLE_NUM_ENTRIES); + error = -EUSERS; + goto end_function; + } + + /* Copy the data */ + if (copy_from_user(&command_args, (void __user *)arg, + sizeof(command_args))) { + error = -EFAULT; + goto end_function; + } + + hash = (void __user *)(unsigned long)command_args.callerIdAddress; + + if (!command_args.pid || !command_args.callerIdSizeInBytes) { + error = -EINVAL; + goto end_function; + } + + dev_dbg(&sep->pdev->dev, "pid is %x\n", command_args.pid); + dev_dbg(&sep->pdev->dev, "callerIdSizeInBytes is %x\n", + command_args.callerIdSizeInBytes); + + if (command_args.callerIdSizeInBytes > + SEP_CALLER_ID_HASH_SIZE_IN_BYTES) { + error = -EMSGSIZE; + goto end_function; + } + + sep->caller_id_table[i].pid = command_args.pid; + + if (copy_from_user(sep->caller_id_table[i].callerIdHash, + hash, command_args.callerIdSizeInBytes)) + error = -EFAULT; +end_function: + return error; +} + +/** + * sep_set_current_caller_id - set the caller id + * @sep: pointer to struct_sep_device + * + * Set the caller ID (if it exists) to the SEP. Note that this + * function falls under the ioctl lock + */ +static int sep_set_current_caller_id(struct sep_device *sep) +{ + int i; + u32 *hash_buf_ptr; + + /* Zero the previous value */ + memset(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES, + 0, SEP_CALLER_ID_HASH_SIZE_IN_BYTES); + + for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) { + if (sep->caller_id_table[i].pid == current->pid) { + dev_dbg(&sep->pdev->dev, "Caller Id found\n"); + + memcpy(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES, + (void *)(sep->caller_id_table[i].callerIdHash), + SEP_CALLER_ID_HASH_SIZE_IN_BYTES); + break; + } + } + /* Ensure data is in little endian */ + hash_buf_ptr = (u32 *)sep->shared_addr + + SEP_CALLER_ID_OFFSET_BYTES; + + for (i = 0; i < SEP_CALLER_ID_HASH_SIZE_IN_WORDS; i++) + hash_buf_ptr[i] = cpu_to_le32(hash_buf_ptr[i]); + + return 0; +} + +/** + * sep_send_command_handler - kick off a command + * @sep: SEP being signalled + * + * This function raises interrupt to SEP that signals that is has a new + * command from the host + * + * Note that this function does fall under the ioctl lock + */ +static int sep_send_command_handler(struct sep_device *sep) +{ + unsigned long lck_flags; + int error = 0; + + if (test_and_set_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) { + error = -EPROTO; + goto end_function; + } + sep_set_time(sep); + + sep_set_current_caller_id(sep); + + sep_dump_message(sep); + + /* Update counter */ + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + sep->send_ct++; + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + dev_dbg(&sep->pdev->dev, + "sep_send_command_handler send_ct %lx reply_ct %lx\n", + sep->send_ct, sep->reply_ct); + + /* Send interrupt to SEP */ + sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); + +end_function: + return error; +} + +/** + * sep_allocate_data_pool_memory_handler -allocate pool memory + * @sep: pointer to struct sep_device + * @arg: pointer to struct alloc_struct + * + * This function handles the allocate data pool memory request + * This function returns calculates the bus address of the + * allocated memory, and the offset of this area from the mapped address. + * Therefore, the FVOs in user space can calculate the exact virtual + * address of this allocated memory + */ +static int sep_allocate_data_pool_memory_handler(struct sep_device *sep, + unsigned long arg) +{ + int error = 0; + struct alloc_struct command_args; + + /* Holds the allocated buffer address in the system memory pool */ + u32 *token_addr; + + if (copy_from_user(&command_args, (void __user *)arg, + sizeof(struct alloc_struct))) { + error = -EFAULT; + goto end_function; + } + + /* Allocate memory */ + if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) { + error = -ENOMEM; + goto end_function; + } + + dev_dbg(&sep->pdev->dev, + "data pool bytes_allocated: %x\n", (int)sep->data_pool_bytes_allocated); + dev_dbg(&sep->pdev->dev, + "offset: %x\n", SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES); + /* Set the virtual and bus address */ + command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + + sep->data_pool_bytes_allocated; + + /* Place in the shared area that is known by the SEP */ + token_addr = (u32 *)(sep->shared_addr + + SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES + + (sep->num_of_data_allocations)*2*sizeof(u32)); + + token_addr[0] = SEP_DATA_POOL_POINTERS_VAL_TOKEN; + token_addr[1] = (u32)sep->shared_bus + + SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + + sep->data_pool_bytes_allocated; + + /* Write the memory back to the user space */ + error = copy_to_user((void *)arg, (void *)&command_args, + sizeof(struct alloc_struct)); + if (error) { + error = -EFAULT; + goto end_function; + } + + /* Update the allocation */ + sep->data_pool_bytes_allocated += command_args.num_bytes; + sep->num_of_data_allocations += 1; + +end_function: + return error; +} + +/** + * sep_lock_kernel_pages - map kernel pages for DMA + * @sep: pointer to struct sep_device + * @kernel_virt_addr: address of data buffer in kernel + * @data_size: size of data + * @lli_array_ptr: lli array + * @in_out_flag: input into device or output from device + * + * This function locks all the physical pages of the kernel virtual buffer + * and construct a basic lli array, where each entry holds the physical + * page address and the size that application data holds in this page + * This function is used only during kernel crypto mod calls from within + * the kernel (when ioctl is not used) + */ +static int sep_lock_kernel_pages(struct sep_device *sep, + unsigned long kernel_virt_addr, + u32 data_size, + struct sep_lli_entry **lli_array_ptr, + int in_out_flag) + +{ + int error = 0; + /* Array of lli */ + struct sep_lli_entry *lli_array; + /* Map array */ + struct sep_dma_map *map_array; + + dev_dbg(&sep->pdev->dev, "lock kernel pages kernel_virt_addr is %08lx\n", + (unsigned long)kernel_virt_addr); + dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size); + + lli_array = kmalloc(sizeof(struct sep_lli_entry), GFP_ATOMIC); + if (!lli_array) { + error = -ENOMEM; + goto end_function; + } + map_array = kmalloc(sizeof(struct sep_dma_map), GFP_ATOMIC); + if (!map_array) { + error = -ENOMEM; + goto end_function_with_error; + } + + map_array[0].dma_addr = + dma_map_single(&sep->pdev->dev, (void *)kernel_virt_addr, + data_size, DMA_BIDIRECTIONAL); + map_array[0].size = data_size; + + + /* + * Set the start address of the first page - app data may start not at + * the beginning of the page + */ + lli_array[0].bus_address = (u32)map_array[0].dma_addr; + lli_array[0].block_size = map_array[0].size; + + dev_dbg(&sep->pdev->dev, + "lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n", + (unsigned long)lli_array[0].bus_address, + lli_array[0].block_size); + + /* Set the output parameters */ + if (in_out_flag == SEP_DRIVER_IN_FLAG) { + *lli_array_ptr = lli_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 1; + sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL; + sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries = 1; + } else { + *lli_array_ptr = lli_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = 1; + sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL; + sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries = 1; + } + goto end_function; + +end_function_with_error: + kfree(lli_array); + +end_function: + return error; +} + +/** + * sep_lock_user_pages - lock and map user pages for DMA + * @sep: pointer to struct sep_device + * @app_virt_addr: user memory data buffer + * @data_size: size of data buffer + * @lli_array_ptr: lli array + * @in_out_flag: input or output to device + * + * This function locks all the physical pages of the application + * virtual buffer and construct a basic lli array, where each entry + * holds the physical page address and the size that application + * data holds in this physical pages + */ +static int sep_lock_user_pages(struct sep_device *sep, + u32 app_virt_addr, + u32 data_size, + struct sep_lli_entry **lli_array_ptr, + int in_out_flag) + +{ + int error = 0; + u32 count; + int result; + /* The the page of the end address of the user space buffer */ + u32 end_page; + /* The page of the start address of the user space buffer */ + u32 start_page; + /* The range in pages */ + u32 num_pages; + /* Array of pointers to page */ + struct page **page_array; + /* Array of lli */ + struct sep_lli_entry *lli_array; + /* Map array */ + struct sep_dma_map *map_array; + /* Direction of the DMA mapping for locked pages */ + enum dma_data_direction dir; + + /* Set start and end pages and num pages */ + end_page = (app_virt_addr + data_size - 1) >> PAGE_SHIFT; + start_page = app_virt_addr >> PAGE_SHIFT; + num_pages = end_page - start_page + 1; + + dev_dbg(&sep->pdev->dev, "lock user pages app_virt_addr is %x\n", app_virt_addr); + dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size); + dev_dbg(&sep->pdev->dev, "start_page is %x\n", start_page); + dev_dbg(&sep->pdev->dev, "end_page is %x\n", end_page); + dev_dbg(&sep->pdev->dev, "num_pages is %x\n", num_pages); + + /* Allocate array of pages structure pointers */ + page_array = kmalloc(sizeof(struct page *) * num_pages, GFP_ATOMIC); + if (!page_array) { + error = -ENOMEM; + goto end_function; + } + map_array = kmalloc(sizeof(struct sep_dma_map) * num_pages, GFP_ATOMIC); + if (!map_array) { + dev_warn(&sep->pdev->dev, "kmalloc for map_array failed\n"); + error = -ENOMEM; + goto end_function_with_error1; + } + + lli_array = kmalloc(sizeof(struct sep_lli_entry) * num_pages, + GFP_ATOMIC); + + if (!lli_array) { + dev_warn(&sep->pdev->dev, "kmalloc for lli_array failed\n"); + error = -ENOMEM; + goto end_function_with_error2; + } + + /* Convert the application virtual address into a set of physical */ + down_read(¤t->mm->mmap_sem); + result = get_user_pages(current, current->mm, app_virt_addr, + num_pages, + ((in_out_flag == SEP_DRIVER_IN_FLAG) ? 0 : 1), + 0, page_array, NULL); + + up_read(¤t->mm->mmap_sem); + + /* Check the number of pages locked - if not all then exit with error */ + if (result != num_pages) { + dev_warn(&sep->pdev->dev, + "not all pages locked by get_user_pages\n"); + error = -ENOMEM; + goto end_function_with_error3; + } + + dev_dbg(&sep->pdev->dev, "get_user_pages succeeded\n"); + + /* Set direction */ + if (in_out_flag == SEP_DRIVER_IN_FLAG) + dir = DMA_TO_DEVICE; + else + dir = DMA_FROM_DEVICE; + + /* + * Fill the array using page array data and + * map the pages - this action will also flush the cache as needed + */ + for (count = 0; count < num_pages; count++) { + /* Fill the map array */ + map_array[count].dma_addr = + dma_map_page(&sep->pdev->dev, page_array[count], + 0, PAGE_SIZE, /*dir*/DMA_BIDIRECTIONAL); + + map_array[count].size = PAGE_SIZE; + + /* Fill the lli array entry */ + lli_array[count].bus_address = (u32)map_array[count].dma_addr; + lli_array[count].block_size = PAGE_SIZE; + + dev_warn(&sep->pdev->dev, "lli_array[%x].bus_address is %08lx, lli_array[%x].block_size is %x\n", + count, (unsigned long)lli_array[count].bus_address, + count, lli_array[count].block_size); + } + + /* Check the offset for the first page */ + lli_array[0].bus_address = + lli_array[0].bus_address + (app_virt_addr & (~PAGE_MASK)); + + /* Check that not all the data is in the first page only */ + if ((PAGE_SIZE - (app_virt_addr & (~PAGE_MASK))) >= data_size) + lli_array[0].block_size = data_size; + else + lli_array[0].block_size = + PAGE_SIZE - (app_virt_addr & (~PAGE_MASK)); + + dev_dbg(&sep->pdev->dev, + "lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n", + (unsigned long)lli_array[count].bus_address, + lli_array[count].block_size); + + /* Check the size of the last page */ + if (num_pages > 1) { + lli_array[num_pages - 1].block_size = + (app_virt_addr + data_size) & (~PAGE_MASK); + + dev_warn(&sep->pdev->dev, + "lli_array[%x].bus_address is %08lx, lli_array[%x].block_size is %x\n", + num_pages - 1, + (unsigned long)lli_array[count].bus_address, + num_pages - 1, + lli_array[count].block_size); + } + + /* Set output params according to the in_out flag */ + if (in_out_flag == SEP_DRIVER_IN_FLAG) { + *lli_array_ptr = lli_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = num_pages; + sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = page_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array; + sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries = + num_pages; + } else { + *lli_array_ptr = lli_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = num_pages; + sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = + page_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array; + sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries = + num_pages; + } + goto end_function; + +end_function_with_error3: + /* Free lli array */ + kfree(lli_array); + +end_function_with_error2: + kfree(map_array); + +end_function_with_error1: + /* Free page array */ + kfree(page_array); + +end_function: + return error; +} + +/** + * u32 sep_calculate_lli_table_max_size - size the LLI table + * @sep: pointer to struct sep_device + * @lli_in_array_ptr + * @num_array_entries + * @last_table_flag + * + * This function calculates the size of data that can be inserted into + * the lli table from this array, such that either the table is full + * (all entries are entered), or there are no more entries in the + * lli array + */ +static u32 sep_calculate_lli_table_max_size(struct sep_device *sep, + struct sep_lli_entry *lli_in_array_ptr, + u32 num_array_entries, + u32 *last_table_flag) +{ + u32 counter; + /* Table data size */ + u32 table_data_size = 0; + /* Data size for the next table */ + u32 next_table_data_size; + + *last_table_flag = 0; + + /* + * Calculate the data in the out lli table till we fill the whole + * table or till the data has ended + */ + for (counter = 0; + (counter < (SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP - 1)) && + (counter < num_array_entries); counter++) + table_data_size += lli_in_array_ptr[counter].block_size; + + /* + * Check if we reached the last entry, + * meaning this ia the last table to build, + * and no need to check the block alignment + */ + if (counter == num_array_entries) { + /* Set the last table flag */ + *last_table_flag = 1; + goto end_function; + } + + /* + * Calculate the data size of the next table. + * Stop if no entries left or if data size is more the DMA restriction + */ + next_table_data_size = 0; + for (; counter < num_array_entries; counter++) { + next_table_data_size += lli_in_array_ptr[counter].block_size; + if (next_table_data_size >= SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) + break; + } + + /* + * Check if the next table data size is less then DMA rstriction. + * if it is - recalculate the current table size, so that the next + * table data size will be adaquete for DMA + */ + if (next_table_data_size && + next_table_data_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) + + table_data_size -= (SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE - + next_table_data_size); + +end_function: + return table_data_size; +} + +/** + * sep_build_lli_table - build an lli array for the given table + * @sep: pointer to struct sep_device + * @lli_array_ptr: pointer to lli array + * @lli_table_ptr: pointer to lli table + * @num_processed_entries_ptr: pointer to number of entries + * @num_table_entries_ptr: pointer to number of tables + * @table_data_size: total data size + * + * Builds ant lli table from the lli_array according to + * the given size of data + */ +static void sep_build_lli_table(struct sep_device *sep, + struct sep_lli_entry *lli_array_ptr, + struct sep_lli_entry *lli_table_ptr, + u32 *num_processed_entries_ptr, + u32 *num_table_entries_ptr, + u32 table_data_size) +{ + /* Current table data size */ + u32 curr_table_data_size; + /* Counter of lli array entry */ + u32 array_counter; + + /* Init currrent table data size and lli array entry counter */ + curr_table_data_size = 0; + array_counter = 0; + *num_table_entries_ptr = 1; + + dev_dbg(&sep->pdev->dev, "build lli table table_data_size is %x\n", table_data_size); + + /* Fill the table till table size reaches the needed amount */ + while (curr_table_data_size < table_data_size) { + /* Update the number of entries in table */ + (*num_table_entries_ptr)++; + + lli_table_ptr->bus_address = + cpu_to_le32(lli_array_ptr[array_counter].bus_address); + + lli_table_ptr->block_size = + cpu_to_le32(lli_array_ptr[array_counter].block_size); + + curr_table_data_size += lli_array_ptr[array_counter].block_size; + + dev_dbg(&sep->pdev->dev, "lli_table_ptr is %p\n", + lli_table_ptr); + dev_dbg(&sep->pdev->dev, "lli_table_ptr->bus_address is %08lx\n", + (unsigned long)lli_table_ptr->bus_address); + dev_dbg(&sep->pdev->dev, "lli_table_ptr->block_size is %x\n", + lli_table_ptr->block_size); + + /* Check for overflow of the table data */ + if (curr_table_data_size > table_data_size) { + dev_dbg(&sep->pdev->dev, + "curr_table_data_size too large\n"); + + /* Update the size of block in the table */ + lli_table_ptr->block_size -= + cpu_to_le32((curr_table_data_size - table_data_size)); + + /* Update the physical address in the lli array */ + lli_array_ptr[array_counter].bus_address += + cpu_to_le32(lli_table_ptr->block_size); + + /* Update the block size left in the lli array */ + lli_array_ptr[array_counter].block_size = + (curr_table_data_size - table_data_size); + } else + /* Advance to the next entry in the lli_array */ + array_counter++; + + dev_dbg(&sep->pdev->dev, + "lli_table_ptr->bus_address is %08lx\n", + (unsigned long)lli_table_ptr->bus_address); + dev_dbg(&sep->pdev->dev, + "lli_table_ptr->block_size is %x\n", + lli_table_ptr->block_size); + + /* Move to the next entry in table */ + lli_table_ptr++; + } + + /* Set the info entry to default */ + lli_table_ptr->bus_address = 0xffffffff; + lli_table_ptr->block_size = 0; + + /* Set the output parameter */ + *num_processed_entries_ptr += array_counter; + +} + +/** + * sep_shared_area_virt_to_bus - map shared area to bus address + * @sep: pointer to struct sep_device + * @virt_address: virtual address to convert + * + * This functions returns the physical address inside shared area according + * to the virtual address. It can be either on the externa RAM device + * (ioremapped), or on the system RAM + * This implementation is for the external RAM + */ +static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep, + void *virt_address) +{ + dev_dbg(&sep->pdev->dev, "sh virt to phys v %p\n", virt_address); + dev_dbg(&sep->pdev->dev, "sh virt to phys p %08lx\n", + (unsigned long) + sep->shared_bus + (virt_address - sep->shared_addr)); + + return sep->shared_bus + (size_t)(virt_address - sep->shared_addr); +} + +/** + * sep_shared_area_bus_to_virt - map shared area bus address to kernel + * @sep: pointer to struct sep_device + * @bus_address: bus address to convert + * + * This functions returns the virtual address inside shared area + * according to the physical address. It can be either on the + * externa RAM device (ioremapped), or on the system RAM + * This implementation is for the external RAM + */ +static void *sep_shared_area_bus_to_virt(struct sep_device *sep, + dma_addr_t bus_address) +{ + dev_dbg(&sep->pdev->dev, "shared bus to virt b=%lx v=%lx\n", + (unsigned long)bus_address, (unsigned long)(sep->shared_addr + + (size_t)(bus_address - sep->shared_bus))); + + return sep->shared_addr + (size_t)(bus_address - sep->shared_bus); +} + +/** + * sep_debug_print_lli_tables - dump LLI table + * @sep: pointer to struct sep_device + * @lli_table_ptr: pointer to sep_lli_entry + * @num_table_entries: number of entries + * @table_data_size: total data size + * + * Walk the the list of the print created tables and print all the data + */ +static void sep_debug_print_lli_tables(struct sep_device *sep, + struct sep_lli_entry *lli_table_ptr, + unsigned long num_table_entries, + unsigned long table_data_size) +{ + unsigned long table_count = 1; + unsigned long entries_count = 0; + + dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables start\n"); + + while ((unsigned long) lli_table_ptr->bus_address != 0xffffffff) { + dev_dbg(&sep->pdev->dev, + "lli table %08lx, table_data_size is %lu\n", + table_count, table_data_size); + dev_dbg(&sep->pdev->dev, "num_table_entries is %lu\n", + num_table_entries); + + /* Print entries of the table (without info entry) */ + for (entries_count = 0; entries_count < num_table_entries; + entries_count++, lli_table_ptr++) { + + dev_dbg(&sep->pdev->dev, + "lli_table_ptr address is %08lx\n", + (unsigned long) lli_table_ptr); + + dev_dbg(&sep->pdev->dev, + "phys address is %08lx block size is %x\n", + (unsigned long)lli_table_ptr->bus_address, + lli_table_ptr->block_size); + } + /* Point to the info entry */ + lli_table_ptr--; + + dev_dbg(&sep->pdev->dev, + "phys lli_table_ptr->block_size is %x\n", + lli_table_ptr->block_size); + + dev_dbg(&sep->pdev->dev, + "phys lli_table_ptr->physical_address is %08lu\n", + (unsigned long)lli_table_ptr->bus_address); + + + table_data_size = lli_table_ptr->block_size & 0xffffff; + num_table_entries = (lli_table_ptr->block_size >> 24) & 0xff; + + dev_dbg(&sep->pdev->dev, + "phys table_data_size is %lu num_table_entries is" + " %lu bus_address is%lu\n", table_data_size, + num_table_entries, (unsigned long)lli_table_ptr->bus_address); + + if ((unsigned long)lli_table_ptr->bus_address != 0xffffffff) + lli_table_ptr = (struct sep_lli_entry *) + sep_shared_bus_to_virt(sep, + (unsigned long)lli_table_ptr->bus_address); + + table_count++; + } + dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables end\n"); +} + + +/** + * sep_prepare_empty_lli_table - create a blank LLI table + * @sep: pointer to struct sep_device + * @lli_table_addr_ptr: pointer to lli table + * @num_entries_ptr: pointer to number of entries + * @table_data_size_ptr: point to table data size + * + * This function creates empty lli tables when there is no data + */ +static void sep_prepare_empty_lli_table(struct sep_device *sep, + dma_addr_t *lli_table_addr_ptr, + u32 *num_entries_ptr, + u32 *table_data_size_ptr) +{ + struct sep_lli_entry *lli_table_ptr; + + /* Find the area for new table */ + lli_table_ptr = + (struct sep_lli_entry *)(sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + sep->num_lli_tables_created * sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); + + lli_table_ptr->bus_address = 0; + lli_table_ptr->block_size = 0; + + lli_table_ptr++; + lli_table_ptr->bus_address = 0xFFFFFFFF; + lli_table_ptr->block_size = 0; + + /* Set the output parameter value */ + *lli_table_addr_ptr = sep->shared_bus + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + sep->num_lli_tables_created * + sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; + + /* Set the num of entries and table data size for empty table */ + *num_entries_ptr = 2; + *table_data_size_ptr = 0; + + /* Update the number of created tables */ + sep->num_lli_tables_created++; +} + +/** + * sep_prepare_input_dma_table - prepare input DMA mappings + * @sep: pointer to struct sep_device + * @data_size: + * @block_size: + * @lli_table_ptr: + * @num_entries_ptr: + * @table_data_size_ptr: + * @is_kva: set for kernel data (kernel cryptio call) + * + * This function prepares only input DMA table for synhronic symmetric + * operations (HASH) + * Note that all bus addresses that are passed to the SEP + * are in 32 bit format; the SEP is a 32 bit device + */ +static int sep_prepare_input_dma_table(struct sep_device *sep, + unsigned long app_virt_addr, + u32 data_size, + u32 block_size, + dma_addr_t *lli_table_ptr, + u32 *num_entries_ptr, + u32 *table_data_size_ptr, + bool is_kva) +{ + int error = 0; + /* Pointer to the info entry of the table - the last entry */ + struct sep_lli_entry *info_entry_ptr; + /* Array of pointers to page */ + struct sep_lli_entry *lli_array_ptr; + /* Points to the first entry to be processed in the lli_in_array */ + u32 current_entry = 0; + /* Num entries in the virtual buffer */ + u32 sep_lli_entries = 0; + /* Lli table pointer */ + struct sep_lli_entry *in_lli_table_ptr; + /* The total data in one table */ + u32 table_data_size = 0; + /* Flag for last table */ + u32 last_table_flag = 0; + /* Number of entries in lli table */ + u32 num_entries_in_table = 0; + /* Next table address */ + void *lli_table_alloc_addr = 0; + + dev_dbg(&sep->pdev->dev, "prepare intput dma table data_size is %x\n", data_size); + dev_dbg(&sep->pdev->dev, "block_size is %x\n", block_size); + + /* Initialize the pages pointers */ + sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL; + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 0; + + /* Set the kernel address for first table to be allocated */ + lli_table_alloc_addr = (void *)(sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + sep->num_lli_tables_created * sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); + + if (data_size == 0) { + /* Special case - create meptu table - 2 entries, zero data */ + sep_prepare_empty_lli_table(sep, lli_table_ptr, + num_entries_ptr, table_data_size_ptr); + goto update_dcb_counter; + } + + /* Check if the pages are in Kernel Virtual Address layout */ + if (is_kva == true) + /* Lock the pages in the kernel */ + error = sep_lock_kernel_pages(sep, app_virt_addr, + data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG); + else + /* + * Lock the pages of the user buffer + * and translate them to pages + */ + error = sep_lock_user_pages(sep, app_virt_addr, + data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG); + + if (error) + goto end_function; + + dev_dbg(&sep->pdev->dev, "output sep_in_num_pages is %x\n", + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages); + + current_entry = 0; + info_entry_ptr = NULL; + + sep_lli_entries = sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages; + + /* Loop till all the entries in in array are not processed */ + while (current_entry < sep_lli_entries) { + + /* Set the new input and output tables */ + in_lli_table_ptr = + (struct sep_lli_entry *)lli_table_alloc_addr; + + lli_table_alloc_addr += sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; + + if (lli_table_alloc_addr > + ((void *)sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) { + + error = -ENOMEM; + goto end_function_error; + + } + + /* Update the number of created tables */ + sep->num_lli_tables_created++; + + /* Calculate the maximum size of data for input table */ + table_data_size = sep_calculate_lli_table_max_size(sep, + &lli_array_ptr[current_entry], + (sep_lli_entries - current_entry), + &last_table_flag); + + /* + * If this is not the last table - + * then align it to the block size + */ + if (!last_table_flag) + table_data_size = + (table_data_size / block_size) * block_size; + + dev_dbg(&sep->pdev->dev, "output table_data_size is %x\n", + table_data_size); + + /* Construct input lli table */ + sep_build_lli_table(sep, &lli_array_ptr[current_entry], + in_lli_table_ptr, + ¤t_entry, &num_entries_in_table, table_data_size); + + if (info_entry_ptr == NULL) { + + /* Set the output parameters to physical addresses */ + *lli_table_ptr = sep_shared_area_virt_to_bus(sep, + in_lli_table_ptr); + *num_entries_ptr = num_entries_in_table; + *table_data_size_ptr = table_data_size; + + dev_dbg(&sep->pdev->dev, + "output lli_table_in_ptr is %08lx\n", + (unsigned long)*lli_table_ptr); + + } else { + /* Update the info entry of the previous in table */ + info_entry_ptr->bus_address = + sep_shared_area_virt_to_bus(sep, + in_lli_table_ptr); + info_entry_ptr->block_size = + ((num_entries_in_table) << 24) | + (table_data_size); + } + /* Save the pointer to the info entry of the current tables */ + info_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1; + } + /* Print input tables */ + sep_debug_print_lli_tables(sep, (struct sep_lli_entry *) + sep_shared_area_bus_to_virt(sep, *lli_table_ptr), + *num_entries_ptr, *table_data_size_ptr); + /* The array of the pages */ + kfree(lli_array_ptr); + +update_dcb_counter: + /* Update DCB counter */ + sep->nr_dcb_creat++; + goto end_function; + +end_function_error: + /* Free all the allocated resources */ + kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array); + kfree(lli_array_ptr); + kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array); + +end_function: + return error; + +} +/** + * sep_construct_dma_tables_from_lli - prepare AES/DES mappings + * @sep: pointer to struct sep_device + * @lli_in_array: + * @sep_in_lli_entries: + * @lli_out_array: + * @sep_out_lli_entries + * @block_size + * @lli_table_in_ptr + * @lli_table_out_ptr + * @in_num_entries_ptr + * @out_num_entries_ptr + * @table_data_size_ptr + * + * This function creates the input and output DMA tables for + * symmetric operations (AES/DES) according to the block + * size from LLI arays + * Note that all bus addresses that are passed to the SEP + * are in 32 bit format; the SEP is a 32 bit device + */ +static int sep_construct_dma_tables_from_lli( + struct sep_device *sep, + struct sep_lli_entry *lli_in_array, + u32 sep_in_lli_entries, + struct sep_lli_entry *lli_out_array, + u32 sep_out_lli_entries, + u32 block_size, + dma_addr_t *lli_table_in_ptr, + dma_addr_t *lli_table_out_ptr, + u32 *in_num_entries_ptr, + u32 *out_num_entries_ptr, + u32 *table_data_size_ptr) +{ + /* Points to the area where next lli table can be allocated */ + void *lli_table_alloc_addr = 0; + /* Input lli table */ + struct sep_lli_entry *in_lli_table_ptr = NULL; + /* Output lli table */ + struct sep_lli_entry *out_lli_table_ptr = NULL; + /* Pointer to the info entry of the table - the last entry */ + struct sep_lli_entry *info_in_entry_ptr = NULL; + /* Pointer to the info entry of the table - the last entry */ + struct sep_lli_entry *info_out_entry_ptr = NULL; + /* Points to the first entry to be processed in the lli_in_array */ + u32 current_in_entry = 0; + /* Points to the first entry to be processed in the lli_out_array */ + u32 current_out_entry = 0; + /* Max size of the input table */ + u32 in_table_data_size = 0; + /* Max size of the output table */ + u32 out_table_data_size = 0; + /* Flag te signifies if this is the last tables build */ + u32 last_table_flag = 0; + /* The data size that should be in table */ + u32 table_data_size = 0; + /* Number of etnries in the input table */ + u32 num_entries_in_table = 0; + /* Number of etnries in the output table */ + u32 num_entries_out_table = 0; + + /* Initiate to point after the message area */ + lli_table_alloc_addr = (void *)(sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + (sep->num_lli_tables_created * + (sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP))); + + /* Loop till all the entries in in array are not processed */ + while (current_in_entry < sep_in_lli_entries) { + /* Set the new input and output tables */ + in_lli_table_ptr = + (struct sep_lli_entry *)lli_table_alloc_addr; + + lli_table_alloc_addr += sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; + + /* Set the first output tables */ + out_lli_table_ptr = + (struct sep_lli_entry *)lli_table_alloc_addr; + + /* Check if the DMA table area limit was overrun */ + if ((lli_table_alloc_addr + sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP) > + ((void *)sep->shared_addr + + SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + + SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) { + + dev_warn(&sep->pdev->dev, "dma table limit overrun\n"); + return -ENOMEM; + } + + /* Update the number of the lli tables created */ + sep->num_lli_tables_created += 2; + + lli_table_alloc_addr += sizeof(struct sep_lli_entry) * + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; + + /* Calculate the maximum size of data for input table */ + in_table_data_size = + sep_calculate_lli_table_max_size(sep, + &lli_in_array[current_in_entry], + (sep_in_lli_entries - current_in_entry), + &last_table_flag); + + /* Calculate the maximum size of data for output table */ + out_table_data_size = + sep_calculate_lli_table_max_size(sep, + &lli_out_array[current_out_entry], + (sep_out_lli_entries - current_out_entry), + &last_table_flag); + + dev_dbg(&sep->pdev->dev, + "construct tables from lli in_table_data_size is %x\n", + in_table_data_size); + + dev_dbg(&sep->pdev->dev, + "construct tables from lli out_table_data_size is %x\n", + out_table_data_size); + + table_data_size = in_table_data_size; + + if (!last_table_flag) { + /* + * If this is not the last table, + * then must check where the data is smallest + * and then align it to the block size + */ + if (table_data_size > out_table_data_size) + table_data_size = out_table_data_size; + + /* + * Now calculate the table size so that + * it will be module block size + */ + table_data_size = (table_data_size / block_size) * + block_size; + } + + /* Construct input lli table */ + sep_build_lli_table(sep, &lli_in_array[current_in_entry], + in_lli_table_ptr, + ¤t_in_entry, + &num_entries_in_table, + table_data_size); + + /* Construct output lli table */ + sep_build_lli_table(sep, &lli_out_array[current_out_entry], + out_lli_table_ptr, + ¤t_out_entry, + &num_entries_out_table, + table_data_size); + + /* If info entry is null - this is the first table built */ + if (info_in_entry_ptr == NULL) { + /* Set the output parameters to physical addresses */ + *lli_table_in_ptr = + sep_shared_area_virt_to_bus(sep, in_lli_table_ptr); + + *in_num_entries_ptr = num_entries_in_table; + + *lli_table_out_ptr = + sep_shared_area_virt_to_bus(sep, + out_lli_table_ptr); + + *out_num_entries_ptr = num_entries_out_table; + *table_data_size_ptr = table_data_size; + + dev_dbg(&sep->pdev->dev, + "output lli_table_in_ptr is %08lx\n", + (unsigned long)*lli_table_in_ptr); + dev_dbg(&sep->pdev->dev, + "output lli_table_out_ptr is %08lx\n", + (unsigned long)*lli_table_out_ptr); + } else { + /* Update the info entry of the previous in table */ + info_in_entry_ptr->bus_address = + sep_shared_area_virt_to_bus(sep, + in_lli_table_ptr); + + info_in_entry_ptr->block_size = + ((num_entries_in_table) << 24) | + (table_data_size); + + /* Update the info entry of the previous in table */ + info_out_entry_ptr->bus_address = + sep_shared_area_virt_to_bus(sep, + out_lli_table_ptr); + + info_out_entry_ptr->block_size = + ((num_entries_out_table) << 24) | + (table_data_size); + + dev_dbg(&sep->pdev->dev, + "output lli_table_in_ptr:%08lx %08x\n", + (unsigned long)info_in_entry_ptr->bus_address, + info_in_entry_ptr->block_size); + + dev_dbg(&sep->pdev->dev, + "output lli_table_out_ptr:%08lx %08x\n", + (unsigned long)info_out_entry_ptr->bus_address, + info_out_entry_ptr->block_size); + } + + /* Save the pointer to the info entry of the current tables */ + info_in_entry_ptr = in_lli_table_ptr + + num_entries_in_table - 1; + info_out_entry_ptr = out_lli_table_ptr + + num_entries_out_table - 1; + + dev_dbg(&sep->pdev->dev, + "output num_entries_out_table is %x\n", + (u32)num_entries_out_table); + dev_dbg(&sep->pdev->dev, + "output info_in_entry_ptr is %lx\n", + (unsigned long)info_in_entry_ptr); + dev_dbg(&sep->pdev->dev, + "output info_out_entry_ptr is %lx\n", + (unsigned long)info_out_entry_ptr); + } + + /* Print input tables */ + sep_debug_print_lli_tables(sep, + (struct sep_lli_entry *) + sep_shared_area_bus_to_virt(sep, *lli_table_in_ptr), + *in_num_entries_ptr, + *table_data_size_ptr); + + /* Print output tables */ + sep_debug_print_lli_tables(sep, + (struct sep_lli_entry *) + sep_shared_area_bus_to_virt(sep, *lli_table_out_ptr), + *out_num_entries_ptr, + *table_data_size_ptr); + + return 0; +} + +/** + * sep_prepare_input_output_dma_table - prepare DMA I/O table + * @app_virt_in_addr: + * @app_virt_out_addr: + * @data_size: + * @block_size: + * @lli_table_in_ptr: + * @lli_table_out_ptr: + * @in_num_entries_ptr: + * @out_num_entries_ptr: + * @table_data_size_ptr: + * @is_kva: set for kernel data; used only for kernel crypto module + * + * This function builds input and output DMA tables for synhronic + * symmetric operations (AES, DES, HASH). It also checks that each table + * is of the modular block size + * Note that all bus addresses that are passed to the SEP + * are in 32 bit format; the SEP is a 32 bit device + */ +static int sep_prepare_input_output_dma_table(struct sep_device *sep, + unsigned long app_virt_in_addr, + unsigned long app_virt_out_addr, + u32 data_size, + u32 block_size, + dma_addr_t *lli_table_in_ptr, + dma_addr_t *lli_table_out_ptr, + u32 *in_num_entries_ptr, + u32 *out_num_entries_ptr, + u32 *table_data_size_ptr, + bool is_kva) + +{ + int error = 0; + /* Array of pointers of page */ + struct sep_lli_entry *lli_in_array; + /* Array of pointers of page */ + struct sep_lli_entry *lli_out_array; + + if (data_size == 0) { + /* Prepare empty table for input and output */ + sep_prepare_empty_lli_table(sep, lli_table_in_ptr, + in_num_entries_ptr, table_data_size_ptr); + + sep_prepare_empty_lli_table(sep, lli_table_out_ptr, + out_num_entries_ptr, table_data_size_ptr); + + goto update_dcb_counter; + } + + /* Initialize the pages pointers */ + sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL; + sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL; + + /* Lock the pages of the buffer and translate them to pages */ + if (is_kva == true) { + error = sep_lock_kernel_pages(sep, app_virt_in_addr, + data_size, &lli_in_array, SEP_DRIVER_IN_FLAG); + + if (error) { + dev_warn(&sep->pdev->dev, + "lock kernel for in failed\n"); + goto end_function; + } + + error = sep_lock_kernel_pages(sep, app_virt_out_addr, + data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG); + + if (error) { + dev_warn(&sep->pdev->dev, + "lock kernel for out failed\n"); + goto end_function; + } + } + + else { + error = sep_lock_user_pages(sep, app_virt_in_addr, + data_size, &lli_in_array, SEP_DRIVER_IN_FLAG); + if (error) { + dev_warn(&sep->pdev->dev, + "sep_lock_user_pages for input virtual buffer failed\n"); + goto end_function; + } + + error = sep_lock_user_pages(sep, app_virt_out_addr, + data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG); + + if (error) { + dev_warn(&sep->pdev->dev, + "sep_lock_user_pages for output virtual buffer failed\n"); + goto end_function_free_lli_in; + } + } + + dev_dbg(&sep->pdev->dev, "prep input output dma table sep_in_num_pages is %x\n", + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages); + dev_dbg(&sep->pdev->dev, "sep_out_num_pages is %x\n", + sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages); + dev_dbg(&sep->pdev->dev, "SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n", + SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); + + /* Call the function that creates table from the lli arrays */ + error = sep_construct_dma_tables_from_lli(sep, lli_in_array, + sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages, + lli_out_array, + sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages, + block_size, lli_table_in_ptr, lli_table_out_ptr, + in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr); + + if (error) { + dev_warn(&sep->pdev->dev, + "sep_construct_dma_tables_from_lli failed\n"); + goto end_function_with_error; + } + + kfree(lli_out_array); + kfree(lli_in_array); + +update_dcb_counter: + /* Update DCB counter */ + sep->nr_dcb_creat++; + + goto end_function; + +end_function_with_error: + kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_map_array); + kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_page_array); + kfree(lli_out_array); + + +end_function_free_lli_in: + kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array); + kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array); + kfree(lli_in_array); + +end_function: + + return error; + +} + +/** + * sep_prepare_input_output_dma_table_in_dcb - prepare control blocks + * @app_in_address: unsigned long; for data buffer in (user space) + * @app_out_address: unsigned long; for data buffer out (user space) + * @data_in_size: u32; for size of data + * @block_size: u32; for block size + * @tail_block_size: u32; for size of tail block + * @isapplet: bool; to indicate external app + * @is_kva: bool; kernel buffer; only used for kernel crypto module + * + * This function prepares the linked DMA tables and puts the + * address for the linked list of tables inta a DCB (data control + * block) the address of which is known by the SEP hardware + * Note that all bus addresses that are passed to the SEP + * are in 32 bit format; the SEP is a 32 bit device + */ +static int sep_prepare_input_output_dma_table_in_dcb(struct sep_device *sep, + unsigned long app_in_address, + unsigned long app_out_address, + u32 data_in_size, + u32 block_size, + u32 tail_block_size, + bool isapplet, + bool is_kva) +{ + int error = 0; + /* Size of tail */ + u32 tail_size = 0; + /* Address of the created DCB table */ + struct sep_dcblock *dcb_table_ptr = NULL; + /* The physical address of the first input DMA table */ + dma_addr_t in_first_mlli_address = 0; + /* Number of entries in the first input DMA table */ + u32 in_first_num_entries = 0; + /* The physical address of the first output DMA table */ + dma_addr_t out_first_mlli_address = 0; + /* Number of entries in the first output DMA table */ + u32 out_first_num_entries = 0; + /* Data in the first input/output table */ + u32 first_data_size = 0; + + if (sep->nr_dcb_creat == SEP_MAX_NUM_SYNC_DMA_OPS) { + /* No more DCBs to allocate */ + dev_warn(&sep->pdev->dev, "no more DCBs available\n"); + error = -ENOSPC; + goto end_function; + } + + /* Allocate new DCB */ + dcb_table_ptr = (struct sep_dcblock *)(sep->shared_addr + + SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES + + (sep->nr_dcb_creat * sizeof(struct sep_dcblock))); + + /* Set the default values in the DCB */ + dcb_table_ptr->input_mlli_address = 0; + dcb_table_ptr->input_mlli_num_entries = 0; + dcb_table_ptr->input_mlli_data_size = 0; + dcb_table_ptr->output_mlli_address = 0; + dcb_table_ptr->output_mlli_num_entries = 0; + dcb_table_ptr->output_mlli_data_size = 0; + dcb_table_ptr->tail_data_size = 0; + dcb_table_ptr->out_vr_tail_pt = 0; + + if (isapplet == true) { + + /* Check if there is enough data for DMA operation */ + if (data_in_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) { + if (is_kva == true) { + memcpy(dcb_table_ptr->tail_data, + (void *)app_in_address, data_in_size); + } else { + if (copy_from_user(dcb_table_ptr->tail_data, + (void __user *)app_in_address, + data_in_size)) { + error = -EFAULT; + goto end_function; + } + } + + dcb_table_ptr->tail_data_size = data_in_size; + + /* Set the output user-space address for mem2mem op */ + if (app_out_address) + dcb_table_ptr->out_vr_tail_pt = + (aligned_u64)app_out_address; + + /* + * Update both data length parameters in order to avoid + * second data copy and allow building of empty mlli + * tables + */ + tail_size = 0x0; + data_in_size = 0x0; + + } else { + if (!app_out_address) { + tail_size = data_in_size % block_size; + if (!tail_size) { + if (tail_block_size == block_size) + tail_size = block_size; + } + } else { + tail_size = 0; + } + } + if (tail_size) { + if (is_kva == true) { + memcpy(dcb_table_ptr->tail_data, + (void *)(app_in_address + data_in_size - + tail_size), tail_size); + } else { + /* We have tail data - copy it to DCB */ + if (copy_from_user(dcb_table_ptr->tail_data, + (void *)(app_in_address + + data_in_size - tail_size), tail_size)) { + error = -EFAULT; + goto end_function; + } + } + if (app_out_address) + /* + * Calculate the output address + * according to tail data size + */ + dcb_table_ptr->out_vr_tail_pt = + (aligned_u64)app_out_address + data_in_size + - tail_size; + + /* Save the real tail data size */ + dcb_table_ptr->tail_data_size = tail_size; + /* + * Update the data size without the tail + * data size AKA data for the dma + */ + data_in_size = (data_in_size - tail_size); + } + } + /* Check if we need to build only input table or input/output */ + if (app_out_address) { + /* Prepare input/output tables */ + error = sep_prepare_input_output_dma_table(sep, + app_in_address, + app_out_address, + data_in_size, + block_size, + &in_first_mlli_address, + &out_first_mlli_address, + &in_first_num_entries, + &out_first_num_entries, + &first_data_size, + is_kva); + } else { + /* Prepare input tables */ + error = sep_prepare_input_dma_table(sep, + app_in_address, + data_in_size, + block_size, + &in_first_mlli_address, + &in_first_num_entries, + &first_data_size, + is_kva); + } + + if (error) { + dev_warn(&sep->pdev->dev, "prepare DMA table call failed from prepare DCB call\n"); + goto end_function; + } + + /* Set the DCB values */ + dcb_table_ptr->input_mlli_address = in_first_mlli_address; + dcb_table_ptr->input_mlli_num_entries = in_first_num_entries; + dcb_table_ptr->input_mlli_data_size = first_data_size; + dcb_table_ptr->output_mlli_address = out_first_mlli_address; + dcb_table_ptr->output_mlli_num_entries = out_first_num_entries; + dcb_table_ptr->output_mlli_data_size = first_data_size; + +end_function: + return error; + +} + +/** + * sep_free_dma_tables_and_dcb - free DMA tables and DCBs + * @sep: pointer to struct sep_device + * @isapplet: indicates external application (used for kernel access) + * @is_kva: indicates kernel addresses (only used for kernel crypto) + * + * This function frees the DMA tables and DCB + */ +static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet, + bool is_kva) +{ + int i = 0; + int error = 0; + int error_temp = 0; + struct sep_dcblock *dcb_table_ptr; + unsigned long pt_hold; + void *tail_pt; + + if (isapplet == true) { + /* Set pointer to first DCB table */ + dcb_table_ptr = (struct sep_dcblock *) + (sep->shared_addr + + SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES); + + /* Go over each DCB and see if tail pointer must be updated */ + for (i = 0; i < sep->nr_dcb_creat; i++, dcb_table_ptr++) { + if (dcb_table_ptr->out_vr_tail_pt) { + pt_hold = (unsigned long)dcb_table_ptr->out_vr_tail_pt; + tail_pt = (void *)pt_hold; + if (is_kva == true) { + memcpy(tail_pt, + dcb_table_ptr->tail_data, + dcb_table_ptr->tail_data_size); + } else { + error_temp = copy_to_user( + tail_pt, + dcb_table_ptr->tail_data, + dcb_table_ptr->tail_data_size); + } + if (error_temp) { + /* Release the DMA resource */ + error = -EFAULT; + break; + } + } + } + } + /* Free the output pages, if any */ + sep_free_dma_table_data_handler(sep); + + return error; +} + +/** + * sep_get_static_pool_addr_handler - get static pool address + * @sep: pointer to struct sep_device + * + * This function sets the bus and virtual addresses of the static pool + */ +static int sep_get_static_pool_addr_handler(struct sep_device *sep) +{ + u32 *static_pool_addr = NULL; + + static_pool_addr = (u32 *)(sep->shared_addr + + SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES); + + static_pool_addr[0] = SEP_STATIC_POOL_VAL_TOKEN; + static_pool_addr[1] = (u32)sep->shared_bus + + SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES; + + dev_dbg(&sep->pdev->dev, "static pool segment: physical %x\n", + (u32)static_pool_addr[1]); + + return 0; +} + +/** + * sep_end_transaction_handler - end transaction + * @sep: pointer to struct sep_device + * + * This API handles the end transaction request + */ +static int sep_end_transaction_handler(struct sep_device *sep) +{ + /* Clear the data pool pointers Token */ + memset((void *)(sep->shared_addr + + SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES), + 0, sep->num_of_data_allocations*2*sizeof(u32)); + + /* Check that all the DMA resources were freed */ + sep_free_dma_table_data_handler(sep); + + clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags); + + /* + * We are now through with the transaction. Let's + * allow other processes who have the device open + * to perform transactions + */ + mutex_lock(&sep->sep_mutex); + sep->pid_doing_transaction = 0; + mutex_unlock(&sep->sep_mutex); + /* Raise event for stuck contextes */ + wake_up(&sep->event); + + return 0; +} + +/** + * sep_prepare_dcb_handler - prepare a control block + * @sep: pointer to struct sep_device + * @arg: pointer to user parameters + * + * This function will retrieve the RAR buffer physical addresses, type + * & size corresponding to the RAR handles provided in the buffers vector. + */ +static int sep_prepare_dcb_handler(struct sep_device *sep, unsigned long arg) +{ + int error; + /* Command arguments */ + struct build_dcb_struct command_args; + + /* Get the command arguments */ + if (copy_from_user(&command_args, (void __user *)arg, + sizeof(struct build_dcb_struct))) { + error = -EFAULT; + goto end_function; + } + + dev_dbg(&sep->pdev->dev, "prep dcb handler app_in_address is %08llx\n", + command_args.app_in_address); + dev_dbg(&sep->pdev->dev, "app_out_address is %08llx\n", + command_args.app_out_address); + dev_dbg(&sep->pdev->dev, "data_size is %x\n", + command_args.data_in_size); + dev_dbg(&sep->pdev->dev, "block_size is %x\n", + command_args.block_size); + dev_dbg(&sep->pdev->dev, "tail block_size is %x\n", + command_args.tail_block_size); + + error = sep_prepare_input_output_dma_table_in_dcb(sep, + (unsigned long)command_args.app_in_address, + (unsigned long)command_args.app_out_address, + command_args.data_in_size, command_args.block_size, + command_args.tail_block_size, true, false); + +end_function: + return error; + +} + +/** + * sep_free_dcb_handler - free control block resources + * @sep: pointer to struct sep_device + * + * This function frees the DCB resources and updates the needed + * user-space buffers. + */ +static int sep_free_dcb_handler(struct sep_device *sep) +{ + return sep_free_dma_tables_and_dcb(sep, false, false); +} + +/** + * sep_rar_prepare_output_msg_handler - prepare an output message + * @sep: pointer to struct sep_device + * @arg: pointer to user parameters + * + * This function will retrieve the RAR buffer physical addresses, type + * & size corresponding to the RAR handles provided in the buffers vector. + */ +static int sep_rar_prepare_output_msg_handler(struct sep_device *sep, + unsigned long arg) +{ + int error = 0; + /* Command args */ + struct rar_hndl_to_bus_struct command_args; + /* Bus address */ + dma_addr_t rar_bus = 0; + /* Holds the RAR address in the system memory offset */ + u32 *rar_addr; + + /* Copy the data */ + if (copy_from_user(&command_args, (void __user *)arg, + sizeof(command_args))) { + error = -EFAULT; + goto end_function; + } + + /* Call to translation function only if user handle is not NULL */ + if (command_args.rar_handle) + return -EOPNOTSUPP; + dev_dbg(&sep->pdev->dev, "rar msg; rar_addr_bus = %x\n", (u32)rar_bus); + + /* Set value in the SYSTEM MEMORY offset */ + rar_addr = (u32 *)(sep->shared_addr + + SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES); + + /* Copy the physical address to the System Area for the SEP */ + rar_addr[0] = SEP_RAR_VAL_TOKEN; + rar_addr[1] = rar_bus; + +end_function: + return error; +} + +/** + * sep_ioctl - ioctl api + * @filp: pointer to struct file + * @cmd: command + * @arg: pointer to argument structure + * + * Implement the ioctl methods available on the SEP device. + */ +static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) +{ + int error = 0; + struct sep_device *sep = filp->private_data; + + /* Make sure we own this device */ + mutex_lock(&sep->sep_mutex); + if ((current->pid != sep->pid_doing_transaction) && + (sep->pid_doing_transaction != 0)) { + dev_dbg(&sep->pdev->dev, "ioctl pid is not owner\n"); + error = -EACCES; + goto end_function; + } + + mutex_unlock(&sep->sep_mutex); + + if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER) + return -ENOTTY; + + /* Lock to prevent the daemon to interfere with operation */ + mutex_lock(&sep->ioctl_mutex); + + switch (cmd) { + case SEP_IOCSENDSEPCOMMAND: + /* Send command to SEP */ + error = sep_send_command_handler(sep); + break; + case SEP_IOCALLOCDATAPOLL: + /* Allocate data pool */ + error = sep_allocate_data_pool_memory_handler(sep, arg); + break; + case SEP_IOCGETSTATICPOOLADDR: + /* Inform the SEP the bus address of the static pool */ + error = sep_get_static_pool_addr_handler(sep); + break; + case SEP_IOCENDTRANSACTION: + error = sep_end_transaction_handler(sep); + break; + case SEP_IOCRARPREPAREMESSAGE: + error = sep_rar_prepare_output_msg_handler(sep, arg); + break; + case SEP_IOCPREPAREDCB: + error = sep_prepare_dcb_handler(sep, arg); + break; + case SEP_IOCFREEDCB: + error = sep_free_dcb_handler(sep); + break; + default: + error = -ENOTTY; + break; + } + +end_function: + mutex_unlock(&sep->ioctl_mutex); + return error; +} + +/** + * sep_singleton_ioctl - ioctl api for singleton interface + * @filp: pointer to struct file + * @cmd: command + * @arg: pointer to argument structure + * + * Implement the additional ioctls for the singleton device + */ +static long sep_singleton_ioctl(struct file *filp, u32 cmd, unsigned long arg) +{ + long error = 0; + struct sep_device *sep = filp->private_data; + + /* Check that the command is for the SEP device */ + if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER) + return -ENOTTY; + + /* Make sure we own this device */ + mutex_lock(&sep->sep_mutex); + if ((current->pid != sep->pid_doing_transaction) && + (sep->pid_doing_transaction != 0)) { + dev_dbg(&sep->pdev->dev, "singleton ioctl pid is not owner\n"); + mutex_unlock(&sep->sep_mutex); + return -EACCES; + } + + mutex_unlock(&sep->sep_mutex); + + switch (cmd) { + case SEP_IOCTLSETCALLERID: + mutex_lock(&sep->ioctl_mutex); + error = sep_set_caller_id_handler(sep, arg); + mutex_unlock(&sep->ioctl_mutex); + break; + default: + error = sep_ioctl(filp, cmd, arg); + break; + } + return error; +} + +/** + * sep_request_daemon_ioctl - ioctl for daemon + * @filp: pointer to struct file + * @cmd: command + * @arg: pointer to argument structure + * + * Called by the request daemon to perform ioctls on the daemon device + */ +static long sep_request_daemon_ioctl(struct file *filp, u32 cmd, + unsigned long arg) +{ + + long error; + struct sep_device *sep = filp->private_data; + + /* Check that the command is for SEP device */ + if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER) + return -ENOTTY; + + /* Only one process can access ioctl at any given time */ + mutex_lock(&sep->ioctl_mutex); + + switch (cmd) { + case SEP_IOCSENDSEPRPLYCOMMAND: + /* Send reply command to SEP */ + error = sep_req_daemon_send_reply_command_handler(sep); + break; + case SEP_IOCENDTRANSACTION: + /* + * End req daemon transaction, do nothing + * will be removed upon update in middleware + * API library + */ + error = 0; + break; + default: + error = -ENOTTY; + } + mutex_unlock(&sep->ioctl_mutex); + return error; +} + +/** + * sep_inthandler - interrupt handler + * @irq: interrupt + * @dev_id: device id + */ +static irqreturn_t sep_inthandler(int irq, void *dev_id) +{ + irqreturn_t int_error = IRQ_HANDLED; + unsigned long lck_flags; + u32 reg_val, reg_val2 = 0; + struct sep_device *sep = dev_id; + + /* Read the IRR register to check if this is SEP interrupt */ + reg_val = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR); + + if (reg_val & (0x1 << 13)) { + /* Lock and update the counter of reply messages */ + spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); + sep->reply_ct++; + spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); + + dev_dbg(&sep->pdev->dev, "sep int: send_ct %lx reply_ct %lx\n", + sep->send_ct, sep->reply_ct); + + /* Is this printf or daemon request? */ + reg_val2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); + dev_dbg(&sep->pdev->dev, + "SEP Interrupt - reg2 is %08x\n", reg_val2); + + if ((reg_val2 >> 30) & 0x1) { + dev_dbg(&sep->pdev->dev, "int: printf request\n"); + wake_up(&sep->event_request_daemon); + } else if (reg_val2 >> 31) { + dev_dbg(&sep->pdev->dev, "int: daemon request\n"); + wake_up(&sep->event_request_daemon); + } else { + dev_dbg(&sep->pdev->dev, "int: SEP reply\n"); + wake_up(&sep->event); + } + } else { + dev_dbg(&sep->pdev->dev, "int: not SEP interrupt\n"); + int_error = IRQ_NONE; + } + if (int_error == IRQ_HANDLED) + sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, reg_val); + + return int_error; +} + +/** + * sep_reconfig_shared_area - reconfigure shared area + * @sep: pointer to struct sep_device + * + * Reconfig the shared area between HOST and SEP - needed in case + * the DX_CC_Init function was called before OS loading. + */ +static int sep_reconfig_shared_area(struct sep_device *sep) +{ + int ret_val; + + /* use to limit waiting for SEP */ + unsigned long end_time; + + /* Send the new SHARED MESSAGE AREA to the SEP */ + dev_dbg(&sep->pdev->dev, "reconfig shared; sending %08llx to sep\n", + (unsigned long long)sep->shared_bus); + + sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_bus); + + /* Poll for SEP response */ + ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR); + + end_time = jiffies + (WAIT_TIME * HZ); + + while ((time_before(jiffies, end_time)) && (ret_val != 0xffffffff) && + (ret_val != sep->shared_bus)) + ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR); + + /* Check the return value (register) */ + if (ret_val != sep->shared_bus) { + dev_warn(&sep->pdev->dev, "could not reconfig shared area\n"); + dev_warn(&sep->pdev->dev, "result was %x\n", ret_val); + ret_val = -ENOMEM; + } else + ret_val = 0; + + dev_dbg(&sep->pdev->dev, "reconfig shared area end\n"); + return ret_val; +} + +/* File operation for singleton SEP operations */ +static const struct file_operations singleton_file_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = sep_singleton_ioctl, + .poll = sep_poll, + .open = sep_singleton_open, + .release = sep_singleton_release, + .mmap = sep_mmap, +}; + +/* File operation for daemon operations */ +static const struct file_operations daemon_file_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = sep_request_daemon_ioctl, + .poll = sep_request_daemon_poll, + .open = sep_request_daemon_open, + .release = sep_request_daemon_release, + .mmap = sep_request_daemon_mmap, +}; + +/* The files operations structure of the driver */ +static const struct file_operations sep_file_operations = { + .owner = THIS_MODULE, + .unlocked_ioctl = sep_ioctl, + .poll = sep_poll, + .open = sep_open, + .release = sep_release, + .mmap = sep_mmap, +}; + +/** + * sep_register_driver_with_fs - register misc devices + * @sep: pointer to struct sep_device + * + * This function registers the driver with the file system + */ +static int sep_register_driver_with_fs(struct sep_device *sep) +{ + int ret_val; + + sep->miscdev_sep.minor = MISC_DYNAMIC_MINOR; + sep->miscdev_sep.name = SEP_DEV_NAME; + sep->miscdev_sep.fops = &sep_file_operations; + + sep->miscdev_singleton.minor = MISC_DYNAMIC_MINOR; + sep->miscdev_singleton.name = SEP_DEV_SINGLETON; + sep->miscdev_singleton.fops = &singleton_file_operations; + + sep->miscdev_daemon.minor = MISC_DYNAMIC_MINOR; + sep->miscdev_daemon.name = SEP_DEV_DAEMON; + sep->miscdev_daemon.fops = &daemon_file_operations; + + ret_val = misc_register(&sep->miscdev_sep); + if (ret_val) { + dev_warn(&sep->pdev->dev, "misc reg fails for SEP %x\n", + ret_val); + return ret_val; + } + + ret_val = misc_register(&sep->miscdev_singleton); + if (ret_val) { + dev_warn(&sep->pdev->dev, "misc reg fails for sing %x\n", + ret_val); + misc_deregister(&sep->miscdev_sep); + return ret_val; + } + + ret_val = misc_register(&sep->miscdev_daemon); + if (ret_val) { + dev_warn(&sep->pdev->dev, "misc reg fails for dmn %x\n", + ret_val); + misc_deregister(&sep->miscdev_sep); + misc_deregister(&sep->miscdev_singleton); + + return ret_val; + } + return ret_val; +} + + +/** + * sep_probe - probe a matching PCI device + * @pdev: pci_device + * @end: pci_device_id + * + * Attempt to set up and configure a SEP device that has been + * discovered by the PCI layer. + */ +static int __devinit sep_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + int error = 0; + struct sep_device *sep; + + if (sep_dev != NULL) { + dev_warn(&pdev->dev, "only one SEP supported.\n"); + return -EBUSY; + } + + /* Enable the device */ + error = pci_enable_device(pdev); + if (error) { + dev_warn(&pdev->dev, "error enabling pci device\n"); + goto end_function; + } + + /* Allocate the sep_device structure for this device */ + sep_dev = kzalloc(sizeof(struct sep_device), GFP_ATOMIC); + if (sep_dev == NULL) { + dev_warn(&pdev->dev, + "can't kmalloc the sep_device structure\n"); + error = -ENOMEM; + goto end_function_disable_device; + } + + /* + * We're going to use another variable for actually + * working with the device; this way, if we have + * multiple devices in the future, it would be easier + * to make appropriate changes + */ + sep = sep_dev; + + sep->pdev = pci_dev_get(pdev); + + init_waitqueue_head(&sep->event); + init_waitqueue_head(&sep->event_request_daemon); + spin_lock_init(&sep->snd_rply_lck); + mutex_init(&sep->sep_mutex); + mutex_init(&sep->ioctl_mutex); + + dev_dbg(&sep->pdev->dev, "sep probe: PCI obtained, device being prepared\n"); + dev_dbg(&sep->pdev->dev, "revision is %d\n", sep->pdev->revision); + + /* Set up our register area */ + sep->reg_physical_addr = pci_resource_start(sep->pdev, 0); + if (!sep->reg_physical_addr) { + dev_warn(&sep->pdev->dev, "Error getting register start\n"); + error = -ENODEV; + goto end_function_free_sep_dev; + } + + sep->reg_physical_end = pci_resource_end(sep->pdev, 0); + if (!sep->reg_physical_end) { + dev_warn(&sep->pdev->dev, "Error getting register end\n"); + error = -ENODEV; + goto end_function_free_sep_dev; + } + + sep->reg_addr = ioremap_nocache(sep->reg_physical_addr, + (size_t)(sep->reg_physical_end - sep->reg_physical_addr + 1)); + if (!sep->reg_addr) { + dev_warn(&sep->pdev->dev, "Error getting register virtual\n"); + error = -ENODEV; + goto end_function_free_sep_dev; + } + + dev_dbg(&sep->pdev->dev, + "Register area start %llx end %llx virtual %p\n", + (unsigned long long)sep->reg_physical_addr, + (unsigned long long)sep->reg_physical_end, + sep->reg_addr); + + /* Allocate the shared area */ + sep->shared_size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + + SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES + + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + + SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES; + + if (sep_map_and_alloc_shared_area(sep)) { + error = -ENOMEM; + /* Allocation failed */ + goto end_function_error; + } + + /* Clear ICR register */ + sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF); + + /* Set the IMR register - open only GPR 2 */ + sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13))); + + /* Read send/receive counters from SEP */ + sep->reply_ct = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); + sep->reply_ct &= 0x3FFFFFFF; + sep->send_ct = sep->reply_ct; + + /* Get the interrupt line */ + error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED, + "sep_driver", sep); + + if (error) + goto end_function_deallocate_sep_shared_area; + + /* The new chip requires a shared area reconfigure */ + if (sep->pdev->revision == 4) { /* Only for new chip */ + error = sep_reconfig_shared_area(sep); + if (error) + goto end_function_free_irq; + } + /* Finally magic up the device nodes */ + /* Register driver with the fs */ + error = sep_register_driver_with_fs(sep); + if (error == 0) + /* Success */ + return 0; + +end_function_free_irq: + free_irq(pdev->irq, sep); + +end_function_deallocate_sep_shared_area: + /* De-allocate shared area */ + sep_unmap_and_free_shared_area(sep); + +end_function_error: + iounmap(sep->reg_addr); + +end_function_free_sep_dev: + pci_dev_put(sep_dev->pdev); + kfree(sep_dev); + sep_dev = NULL; + +end_function_disable_device: + pci_disable_device(pdev); + +end_function: + return error; +} + +static void sep_remove(struct pci_dev *pdev) +{ + struct sep_device *sep = sep_dev; + + /* Unregister from fs */ + misc_deregister(&sep->miscdev_sep); + misc_deregister(&sep->miscdev_singleton); + misc_deregister(&sep->miscdev_daemon); + + /* Free the irq */ + free_irq(sep->pdev->irq, sep); + + /* Free the shared area */ + sep_unmap_and_free_shared_area(sep_dev); + iounmap((void *) sep_dev->reg_addr); +} + +static DEFINE_PCI_DEVICE_TABLE(sep_pci_id_tbl) = { + {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MFLD_PCI_DEVICE_ID)}, + {0} +}; + +MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl); + +/* Field for registering driver to PCI device */ +static struct pci_driver sep_pci_driver = { + .name = "sep_sec_driver", + .id_table = sep_pci_id_tbl, + .probe = sep_probe, + .remove = sep_remove +}; + + +/** + * sep_init - init function + * + * Module load time. Register the PCI device driver. + */ +static int __init sep_init(void) +{ + return pci_register_driver(&sep_pci_driver); +} + + +/** + * sep_exit - called to unload driver + * + * Drop the misc devices then remove and unmap the various resources + * that are not released by the driver remove method. + */ +static void __exit sep_exit(void) +{ + pci_unregister_driver(&sep_pci_driver); +} + + +module_init(sep_init); +module_exit(sep_exit); + +MODULE_LICENSE("GPL"); diff --git a/drivers/misc/sep/sep_driver_api.h b/drivers/misc/sep/sep_driver_api.h new file mode 100644 index 0000000..c3aacfc --- /dev/null +++ b/drivers/misc/sep/sep_driver_api.h @@ -0,0 +1,215 @@ +/* + * + * sep_driver_api.h - Security Processor Driver api definitions + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES: + * + * 2010.09.14 Upgrade to Medfield + * + */ + +#ifndef __SEP_DRIVER_API_H__ +#define __SEP_DRIVER_API_H__ + +/* Type of request from device */ +#define SEP_DRIVER_SRC_REPLY 1 +#define SEP_DRIVER_SRC_REQ 2 +#define SEP_DRIVER_SRC_PRINTF 3 + + +/*------------------------------------------- + TYPEDEFS +----------------------------------------------*/ + +struct alloc_struct { + /* offset from start of shared pool area */ + u32 offset; + /* number of bytes to allocate */ + u32 num_bytes; +}; + +/* command struct for getting caller id value and address */ +struct caller_id_struct { + /* pid of the process */ + u32 pid; + /* virtual address of the caller id hash */ + aligned_u64 callerIdAddress; + /* caller id hash size in bytes */ + u32 callerIdSizeInBytes; +}; + +/* + structure that represents DCB +*/ +struct sep_dcblock { + /* physical address of the first input mlli */ + u32 input_mlli_address; + /* num of entries in the first input mlli */ + u32 input_mlli_num_entries; + /* size of data in the first input mlli */ + u32 input_mlli_data_size; + /* physical address of the first output mlli */ + u32 output_mlli_address; + /* num of entries in the first output mlli */ + u32 output_mlli_num_entries; + /* size of data in the first output mlli */ + u32 output_mlli_data_size; + /* pointer to the output virtual tail */ + aligned_u64 out_vr_tail_pt; + /* size of tail data */ + u32 tail_data_size; + /* input tail data array */ + u8 tail_data[68]; +}; + +struct sep_caller_id_entry { + int pid; + unsigned char callerIdHash[SEP_CALLER_ID_HASH_SIZE_IN_BYTES]; +}; + +/* + command structure for building dcb block (currently for ext app only +*/ +struct build_dcb_struct { + /* address value of the data in */ + aligned_u64 app_in_address; + /* size of data in */ + u32 data_in_size; + /* address of the data out */ + aligned_u64 app_out_address; + /* the size of the block of the operation - if needed, + every table will be modulo this parameter */ + u32 block_size; + /* the size of the block of the operation - if needed, + every table will be modulo this parameter */ + u32 tail_block_size; +}; + +/** + * @struct sep_dma_map + * + * Structure that contains all information needed for mapping the user pages + * or kernel buffers for dma operations + * + * + */ +struct sep_dma_map { + /* mapped dma address */ + dma_addr_t dma_addr; + /* size of the mapped data */ + size_t size; +}; + +struct sep_dma_resource { + /* array of pointers to the pages that represent + input data for the synchronic DMA action */ + struct page **in_page_array; + + /* array of pointers to the pages that represent out + data for the synchronic DMA action */ + struct page **out_page_array; + + /* number of pages in the sep_in_page_array */ + u32 in_num_pages; + + /* number of pages in the sep_out_page_array */ + u32 out_num_pages; + + /* map array of the input data */ + struct sep_dma_map *in_map_array; + + /* map array of the output data */ + struct sep_dma_map *out_map_array; + + /* number of entries of the input mapp array */ + u32 in_map_num_entries; + + /* number of entries of the output mapp array */ + u32 out_map_num_entries; +}; + + +/* command struct for translating rar handle to bus address + and setting it at predefined location */ +struct rar_hndl_to_bus_struct { + + /* rar handle */ + aligned_u64 rar_handle; +}; + +/* + structure that represent one entry in the DMA LLI table +*/ +struct sep_lli_entry { + /* physical address */ + u32 bus_address; + + /* block size */ + u32 block_size; +}; + +/*---------------------------------------------------------------- + IOCTL command defines + -----------------------------------------------------------------*/ + +/* magic number 1 of the sep IOCTL command */ +#define SEP_IOC_MAGIC_NUMBER 's' + +/* sends interrupt to sep that message is ready */ +#define SEP_IOCSENDSEPCOMMAND \ + _IO(SEP_IOC_MAGIC_NUMBER, 0) + +/* sends interrupt to sep that message is ready */ +#define SEP_IOCSENDSEPRPLYCOMMAND \ + _IO(SEP_IOC_MAGIC_NUMBER, 1) + +/* allocate memory in data pool */ +#define SEP_IOCALLOCDATAPOLL \ + _IOW(SEP_IOC_MAGIC_NUMBER, 2, struct alloc_struct) + +/* free dynamic data aalocated during table creation */ +#define SEP_IOCFREEDMATABLEDATA \ + _IO(SEP_IOC_MAGIC_NUMBER, 7) + +/* get the static pool area addersses (physical and virtual) */ +#define SEP_IOCGETSTATICPOOLADDR \ + _IO(SEP_IOC_MAGIC_NUMBER, 8) + +/* end transaction command */ +#define SEP_IOCENDTRANSACTION \ + _IO(SEP_IOC_MAGIC_NUMBER, 15) + +#define SEP_IOCRARPREPAREMESSAGE \ + _IOW(SEP_IOC_MAGIC_NUMBER, 20, struct rar_hndl_to_bus_struct) + +#define SEP_IOCTLSETCALLERID \ + _IOW(SEP_IOC_MAGIC_NUMBER, 34, struct caller_id_struct) + +#define SEP_IOCPREPAREDCB \ + _IOW(SEP_IOC_MAGIC_NUMBER, 35, struct build_dcb_struct) + +#define SEP_IOCFREEDCB \ + _IO(SEP_IOC_MAGIC_NUMBER, 36) + +#endif diff --git a/drivers/misc/sep/sep_driver_config.h b/drivers/misc/sep/sep_driver_config.h new file mode 100644 index 0000000..1033425 --- /dev/null +++ b/drivers/misc/sep/sep_driver_config.h @@ -0,0 +1,243 @@ +/* + * + * sep_driver_config.h - Security Processor Driver configuration + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES: + * + * 2010.06.26 Upgrade to Medfield + * + */ + +#ifndef __SEP_DRIVER_CONFIG_H__ +#define __SEP_DRIVER_CONFIG_H__ + + +/*-------------------------------------- + DRIVER CONFIGURATION FLAGS + -------------------------------------*/ + +/* if flag is on , then the driver is running in polling and + not interrupt mode */ +#define SEP_DRIVER_POLLING_MODE 0 + +/* flag which defines if the shared area address should be + reconfiged (send to SEP anew) during init of the driver */ +#define SEP_DRIVER_RECONFIG_MESSAGE_AREA 0 + +/* the mode for running on the ARM1172 Evaluation platform (flag is 1) */ +#define SEP_DRIVER_ARM_DEBUG_MODE 0 + +/*------------------------------------------- + INTERNAL DATA CONFIGURATION + -------------------------------------------*/ + +/* flag for the input array */ +#define SEP_DRIVER_IN_FLAG 0 + +/* flag for output array */ +#define SEP_DRIVER_OUT_FLAG 1 + +/* maximum number of entries in one LLI tables */ +#define SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP 31 + +/* minimum data size of the MLLI table */ +#define SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE 16 + +/* flag that signifies tah the lock is +currently held by the process (struct file) */ +#define SEP_DRIVER_OWN_LOCK_FLAG 1 + +/* flag that signifies tah the lock is currently NOT +held by the process (struct file) */ +#define SEP_DRIVER_DISOWN_LOCK_FLAG 0 + +/* indicates whether driver has mapped/unmapped shared area */ +#define SEP_REQUEST_DAEMON_MAPPED 1 +#define SEP_REQUEST_DAEMON_UNMAPPED 0 + +#define SEP_DEV_NAME "sep_sec_driver" +#define SEP_DEV_SINGLETON "sep_sec_singleton_driver" +#define SEP_DEV_DAEMON "sep_req_daemon_driver" + +/*-------------------------------------------------------- + SHARED AREA memory total size is 36K + it is divided is following: + + SHARED_MESSAGE_AREA 8K } + } + STATIC_POOL_AREA 4K } MAPPED AREA ( 24 K) + } + DATA_POOL_AREA 12K } + + SYNCHRONIC_DMA_TABLES_AREA 5K + + placeholder until drver changes + FLOW_DMA_TABLES_AREA 4K + + SYSTEM_MEMORY_AREA 3k + + SYSTEM_MEMORY total size is 3k + it is divided as following: + + TIME_MEMORY_AREA 8B +-----------------------------------------------------------*/ + +#define SEP_DEV_NAME "sep_sec_driver" +#define SEP_DEV_SINGLETON "sep_sec_singleton_driver" +#define SEP_DEV_DAEMON "sep_req_daemon_driver" + + +/* + the maximum length of the message - the rest of the message shared + area will be dedicated to the dma lli tables +*/ +#define SEP_DRIVER_MAX_MESSAGE_SIZE_IN_BYTES (8 * 1024) + +/* the size of the message shared area in pages */ +#define SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES (8 * 1024) + +/* the size of the data pool static area in pages */ +#define SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES (4 * 1024) + +/* the size of the data pool shared area size in pages */ +#define SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES (16 * 1024) + +/* the size of the message shared area in pages */ +#define SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES (1024 * 5) + +/* Placeholder until driver changes */ +#define SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES (1024 * 4) + +/* system data (time, caller id etc') pool */ +#define SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES (1024 * 3) + +/* the size in bytes of the time memory */ +#define SEP_DRIVER_TIME_MEMORY_SIZE_IN_BYTES 8 + +/* the size in bytes of the RAR parameters memory */ +#define SEP_DRIVER_SYSTEM_RAR_MEMORY_SIZE_IN_BYTES 8 + +/* area size that is mapped - we map the MESSAGE AREA, STATIC POOL and + DATA POOL areas. area must be module 4k */ +#define SEP_DRIVER_MMMAP_AREA_SIZE (1024 * 28) + +/*----------------------------------------------- + offsets of the areas starting from the shared area start address +*/ + +/* message area offset */ +#define SEP_DRIVER_MESSAGE_AREA_OFFSET_IN_BYTES 0 + +/* static pool area offset */ +#define SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES \ + (SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES) + +/* data pool area offset */ +#define SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES \ + (SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES + \ + SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES) + +/* synhronic dma tables area offset */ +#define SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES \ + (SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + \ + SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) + +/* system memory offset in bytes */ +#define SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES \ + (SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + \ + SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES) + +/* offset of the time area */ +#define SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES \ + (SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES) + +/* offset of the RAR area */ +#define SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES \ + (SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES + \ + SEP_DRIVER_TIME_MEMORY_SIZE_IN_BYTES) + +/* offset of the caller id area */ +#define SEP_CALLER_ID_OFFSET_BYTES \ + (SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES + \ + SEP_DRIVER_SYSTEM_RAR_MEMORY_SIZE_IN_BYTES) + +/* offset of the DCB area */ +#define SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES \ + (SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES + \ + 0x400) + +/* offset of the ext cache area */ +#define SEP_DRIVER_SYSTEM_EXT_CACHE_ADDR_OFFSET_IN_BYTES \ + SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES + +/* offset of the allocation data pointer area */ +#define SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES \ + (SEP_CALLER_ID_OFFSET_BYTES + \ + SEP_CALLER_ID_HASH_SIZE_IN_BYTES) + +/* the token that defines the start of time address */ +#define SEP_TIME_VAL_TOKEN 0x12345678 + +#define FAKE_RAR_SIZE (1024*1024) /* used only for mfld */ +/* DEBUG LEVEL MASKS */ + +/* size of the caller id hash (sha2) */ +#define SEP_CALLER_ID_HASH_SIZE_IN_BYTES 32 + +/* size of the caller id hash (sha2) in 32 bit words */ +#define SEP_CALLER_ID_HASH_SIZE_IN_WORDS 8 + +/* maximum number of entries in the caller id table */ +#define SEP_CALLER_ID_TABLE_NUM_ENTRIES 20 + +/* maximum number of symetric operation (that require DMA resource) + per one message */ +#define SEP_MAX_NUM_SYNC_DMA_OPS 16 + +/* the token that defines the start of time address */ +#define SEP_RAR_VAL_TOKEN 0xABABABAB + +/* ioctl error that should be returned when trying + to realloc the cache/resident second time */ +#define SEP_ALREADY_INITIALIZED_ERR 12 + +/* bit that locks access to the shared area */ +#define SEP_MMAP_LOCK_BIT 0 + +/* bit that lock access to the poll - after send_command */ +#define SEP_SEND_MSG_LOCK_BIT 1 + +/* the token that defines the static pool address address */ +#define SEP_STATIC_POOL_VAL_TOKEN 0xABBAABBA + +/* the token that defines the data pool pointers address */ +#define SEP_DATA_POOL_POINTERS_VAL_TOKEN 0xEDDEEDDE + +/* the token that defines the data pool pointers address */ +#define SEP_EXT_CACHE_ADDR_VAL_TOKEN 0xBABABABA + +/* Time limit for SEP to finish */ +#define WAIT_TIME 10 + +#endif /* SEP DRIVER CONFIG */ diff --git a/drivers/misc/sep/sep_driver_hw_defs.h b/drivers/misc/sep/sep_driver_hw_defs.h new file mode 100644 index 0000000..300f909 --- /dev/null +++ b/drivers/misc/sep/sep_driver_hw_defs.h @@ -0,0 +1,233 @@ +/* + * + * sep_driver_hw_defs.h - Security Processor Driver hardware definitions + * + * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. + * Contributions(c) 2009,2010 Discretix. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; if not, write to the Free Software Foundation, Inc., 59 + * Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * CONTACTS: + * + * Mark Allyn mark.a.allyn@intel.com + * Jayant Mangalampalli jayant.mangalampalli@intel.com + * + * CHANGES: + * + * 2010.09.20 Upgrade to Medfield + * + */ + +#ifndef SEP_DRIVER_HW_DEFS__H +#define SEP_DRIVER_HW_DEFS__H + +/* PCI ID's */ +#define MFLD_PCI_DEVICE_ID 0x0826 + +/*----------------------- */ +/* HW Registers Defines. */ +/* */ +/*---------------------- -*/ + + +/* cf registers */ +#define HW_R0B_ADDR_0_REG_ADDR 0x0000UL +#define HW_R0B_ADDR_1_REG_ADDR 0x0004UL +#define HW_R0B_ADDR_2_REG_ADDR 0x0008UL +#define HW_R0B_ADDR_3_REG_ADDR 0x000cUL +#define HW_R0B_ADDR_4_REG_ADDR 0x0010UL +#define HW_R0B_ADDR_5_REG_ADDR 0x0014UL +#define HW_R0B_ADDR_6_REG_ADDR 0x0018UL +#define HW_R0B_ADDR_7_REG_ADDR 0x001cUL +#define HW_R0B_ADDR_8_REG_ADDR 0x0020UL +#define HW_R2B_ADDR_0_REG_ADDR 0x0080UL +#define HW_R2B_ADDR_1_REG_ADDR 0x0084UL +#define HW_R2B_ADDR_2_REG_ADDR 0x0088UL +#define HW_R2B_ADDR_3_REG_ADDR 0x008cUL +#define HW_R2B_ADDR_4_REG_ADDR 0x0090UL +#define HW_R2B_ADDR_5_REG_ADDR 0x0094UL +#define HW_R2B_ADDR_6_REG_ADDR 0x0098UL +#define HW_R2B_ADDR_7_REG_ADDR 0x009cUL +#define HW_R2B_ADDR_8_REG_ADDR 0x00a0UL +#define HW_R3B_REG_ADDR 0x00C0UL +#define HW_R4B_REG_ADDR 0x0100UL +#define HW_CSA_ADDR_0_REG_ADDR 0x0140UL +#define HW_CSA_ADDR_1_REG_ADDR 0x0144UL +#define HW_CSA_ADDR_2_REG_ADDR 0x0148UL +#define HW_CSA_ADDR_3_REG_ADDR 0x014cUL +#define HW_CSA_ADDR_4_REG_ADDR 0x0150UL +#define HW_CSA_ADDR_5_REG_ADDR 0x0154UL +#define HW_CSA_ADDR_6_REG_ADDR 0x0158UL +#define HW_CSA_ADDR_7_REG_ADDR 0x015cUL +#define HW_CSA_ADDR_8_REG_ADDR 0x0160UL +#define HW_CSA_REG_ADDR 0x0140UL +#define HW_SINB_REG_ADDR 0x0180UL +#define HW_SOUTB_REG_ADDR 0x0184UL +#define HW_PKI_CONTROL_REG_ADDR 0x01C0UL +#define HW_PKI_STATUS_REG_ADDR 0x01C4UL +#define HW_PKI_BUSY_REG_ADDR 0x01C8UL +#define HW_PKI_A_1025_REG_ADDR 0x01CCUL +#define HW_PKI_SDMA_CTL_REG_ADDR 0x01D0UL +#define HW_PKI_SDMA_OFFSET_REG_ADDR 0x01D4UL +#define HW_PKI_SDMA_POINTERS_REG_ADDR 0x01D8UL +#define HW_PKI_SDMA_DLENG_REG_ADDR 0x01DCUL +#define HW_PKI_SDMA_EXP_POINTERS_REG_ADDR 0x01E0UL +#define HW_PKI_SDMA_RES_POINTERS_REG_ADDR 0x01E4UL +#define HW_PKI_CLR_REG_ADDR 0x01E8UL +#define HW_PKI_SDMA_BUSY_REG_ADDR 0x01E8UL +#define HW_PKI_SDMA_FIRST_EXP_N_REG_ADDR 0x01ECUL +#define HW_PKI_SDMA_MUL_BY1_REG_ADDR 0x01F0UL +#define HW_PKI_SDMA_RMUL_SEL_REG_ADDR 0x01F4UL +#define HW_DES_KEY_0_REG_ADDR 0x0208UL +#define HW_DES_KEY_1_REG_ADDR 0x020CUL +#define HW_DES_KEY_2_REG_ADDR 0x0210UL +#define HW_DES_KEY_3_REG_ADDR 0x0214UL +#define HW_DES_KEY_4_REG_ADDR 0x0218UL +#define HW_DES_KEY_5_REG_ADDR 0x021CUL +#define HW_DES_CONTROL_0_REG_ADDR 0x0220UL +#define HW_DES_CONTROL_1_REG_ADDR 0x0224UL +#define HW_DES_IV_0_REG_ADDR 0x0228UL +#define HW_DES_IV_1_REG_ADDR 0x022CUL +#define HW_AES_KEY_0_ADDR_0_REG_ADDR 0x0400UL +#define HW_AES_KEY_0_ADDR_1_REG_ADDR 0x0404UL +#define HW_AES_KEY_0_ADDR_2_REG_ADDR 0x0408UL +#define HW_AES_KEY_0_ADDR_3_REG_ADDR 0x040cUL +#define HW_AES_KEY_0_ADDR_4_REG_ADDR 0x0410UL +#define HW_AES_KEY_0_ADDR_5_REG_ADDR 0x0414UL +#define HW_AES_KEY_0_ADDR_6_REG_ADDR 0x0418UL +#define HW_AES_KEY_0_ADDR_7_REG_ADDR 0x041cUL +#define HW_AES_KEY_0_REG_ADDR 0x0400UL +#define HW_AES_IV_0_ADDR_0_REG_ADDR 0x0440UL +#define HW_AES_IV_0_ADDR_1_REG_ADDR 0x0444UL +#define HW_AES_IV_0_ADDR_2_REG_ADDR 0x0448UL +#define HW_AES_IV_0_ADDR_3_REG_ADDR 0x044cUL +#define HW_AES_IV_0_REG_ADDR 0x0440UL +#define HW_AES_CTR1_ADDR_0_REG_ADDR 0x0460UL +#define HW_AES_CTR1_ADDR_1_REG_ADDR 0x0464UL +#define HW_AES_CTR1_ADDR_2_REG_ADDR 0x0468UL +#define HW_AES_CTR1_ADDR_3_REG_ADDR 0x046cUL +#define HW_AES_CTR1_REG_ADDR 0x0460UL +#define HW_AES_SK_REG_ADDR 0x0478UL +#define HW_AES_MAC_OK_REG_ADDR 0x0480UL +#define HW_AES_PREV_IV_0_ADDR_0_REG_ADDR 0x0490UL +#define HW_AES_PREV_IV_0_ADDR_1_REG_ADDR 0x0494UL +#define HW_AES_PREV_IV_0_ADDR_2_REG_ADDR 0x0498UL +#define HW_AES_PREV_IV_0_ADDR_3_REG_ADDR 0x049cUL +#define HW_AES_PREV_IV_0_REG_ADDR 0x0490UL +#define HW_AES_CONTROL_REG_ADDR 0x04C0UL +#define HW_HASH_H0_REG_ADDR 0x0640UL +#define HW_HASH_H1_REG_ADDR 0x0644UL +#define HW_HASH_H2_REG_ADDR 0x0648UL +#define HW_HASH_H3_REG_ADDR 0x064CUL +#define HW_HASH_H4_REG_ADDR 0x0650UL +#define HW_HASH_H5_REG_ADDR 0x0654UL +#define HW_HASH_H6_REG_ADDR 0x0658UL +#define HW_HASH_H7_REG_ADDR 0x065CUL +#define HW_HASH_H8_REG_ADDR 0x0660UL +#define HW_HASH_H9_REG_ADDR 0x0664UL +#define HW_HASH_H10_REG_ADDR 0x0668UL +#define HW_HASH_H11_REG_ADDR 0x066CUL +#define HW_HASH_H12_REG_ADDR 0x0670UL +#define HW_HASH_H13_REG_ADDR 0x0674UL +#define HW_HASH_H14_REG_ADDR 0x0678UL +#define HW_HASH_H15_REG_ADDR 0x067CUL +#define HW_HASH_CONTROL_REG_ADDR 0x07C0UL +#define HW_HASH_PAD_EN_REG_ADDR 0x07C4UL +#define HW_HASH_PAD_CFG_REG_ADDR 0x07C8UL +#define HW_HASH_CUR_LEN_0_REG_ADDR 0x07CCUL +#define HW_HASH_CUR_LEN_1_REG_ADDR 0x07D0UL +#define HW_HASH_CUR_LEN_2_REG_ADDR 0x07D4UL +#define HW_HASH_CUR_LEN_3_REG_ADDR 0x07D8UL +#define HW_HASH_PARAM_REG_ADDR 0x07DCUL +#define HW_HASH_INT_BUSY_REG_ADDR 0x07E0UL +#define HW_HASH_SW_RESET_REG_ADDR 0x07E4UL +#define HW_HASH_ENDIANESS_REG_ADDR 0x07E8UL +#define HW_HASH_DATA_REG_ADDR 0x07ECUL +#define HW_DRNG_CONTROL_REG_ADDR 0x0800UL +#define HW_DRNG_VALID_REG_ADDR 0x0804UL +#define HW_DRNG_DATA_REG_ADDR 0x0808UL +#define HW_RND_SRC_EN_REG_ADDR 0x080CUL +#define HW_AES_CLK_ENABLE_REG_ADDR 0x0810UL +#define HW_DES_CLK_ENABLE_REG_ADDR 0x0814UL +#define HW_HASH_CLK_ENABLE_REG_ADDR 0x0818UL +#define HW_PKI_CLK_ENABLE_REG_ADDR 0x081CUL +#define HW_CLK_STATUS_REG_ADDR 0x0824UL +#define HW_CLK_ENABLE_REG_ADDR 0x0828UL +#define HW_DRNG_SAMPLE_REG_ADDR 0x0850UL +#define HW_RND_SRC_CTL_REG_ADDR 0x0858UL +#define HW_CRYPTO_CTL_REG_ADDR 0x0900UL +#define HW_CRYPTO_STATUS_REG_ADDR 0x090CUL +#define HW_CRYPTO_BUSY_REG_ADDR 0x0910UL +#define HW_AES_BUSY_REG_ADDR 0x0914UL +#define HW_DES_BUSY_REG_ADDR 0x0918UL +#define HW_HASH_BUSY_REG_ADDR 0x091CUL +#define HW_CONTENT_REG_ADDR 0x0924UL +#define HW_VERSION_REG_ADDR 0x0928UL +#define HW_CONTEXT_ID_REG_ADDR 0x0930UL +#define HW_DIN_BUFFER_REG_ADDR 0x0C00UL +#define HW_DIN_MEM_DMA_BUSY_REG_ADDR 0x0c20UL +#define HW_SRC_LLI_MEM_ADDR_REG_ADDR 0x0c24UL +#define HW_SRC_LLI_WORD0_REG_ADDR 0x0C28UL +#define HW_SRC_LLI_WORD1_REG_ADDR 0x0C2CUL +#define HW_SRAM_SRC_ADDR_REG_ADDR 0x0c30UL +#define HW_DIN_SRAM_BYTES_LEN_REG_ADDR 0x0c34UL +#define HW_DIN_SRAM_DMA_BUSY_REG_ADDR 0x0C38UL +#define HW_WRITE_ALIGN_REG_ADDR 0x0C3CUL +#define HW_OLD_DATA_REG_ADDR 0x0C48UL +#define HW_WRITE_ALIGN_LAST_REG_ADDR 0x0C4CUL +#define HW_DOUT_BUFFER_REG_ADDR 0x0C00UL +#define HW_DST_LLI_WORD0_REG_ADDR 0x0D28UL +#define HW_DST_LLI_WORD1_REG_ADDR 0x0D2CUL +#define HW_DST_LLI_MEM_ADDR_REG_ADDR 0x0D24UL +#define HW_DOUT_MEM_DMA_BUSY_REG_ADDR 0x0D20UL +#define HW_SRAM_DEST_ADDR_REG_ADDR 0x0D30UL +#define HW_DOUT_SRAM_BYTES_LEN_REG_ADDR 0x0D34UL +#define HW_DOUT_SRAM_DMA_BUSY_REG_ADDR 0x0D38UL +#define HW_READ_ALIGN_REG_ADDR 0x0D3CUL +#define HW_READ_LAST_DATA_REG_ADDR 0x0D44UL +#define HW_RC4_THRU_CPU_REG_ADDR 0x0D4CUL +#define HW_AHB_SINGLE_REG_ADDR 0x0E00UL +#define HW_SRAM_DATA_REG_ADDR 0x0F00UL +#define HW_SRAM_ADDR_REG_ADDR 0x0F04UL +#define HW_SRAM_DATA_READY_REG_ADDR 0x0F08UL +#define HW_HOST_IRR_REG_ADDR 0x0A00UL +#define HW_HOST_IMR_REG_ADDR 0x0A04UL +#define HW_HOST_ICR_REG_ADDR 0x0A08UL +#define HW_HOST_SEP_SRAM_THRESHOLD_REG_ADDR 0x0A10UL +#define HW_HOST_SEP_BUSY_REG_ADDR 0x0A14UL +#define HW_HOST_SEP_LCS_REG_ADDR 0x0A18UL +#define HW_HOST_CC_SW_RST_REG_ADDR 0x0A40UL +#define HW_HOST_SEP_SW_RST_REG_ADDR 0x0A44UL +#define HW_HOST_FLOW_DMA_SW_INT0_REG_ADDR 0x0A80UL +#define HW_HOST_FLOW_DMA_SW_INT1_REG_ADDR 0x0A84UL +#define HW_HOST_FLOW_DMA_SW_INT2_REG_ADDR 0x0A88UL +#define HW_HOST_FLOW_DMA_SW_INT3_REG_ADDR 0x0A8cUL +#define HW_HOST_FLOW_DMA_SW_INT4_REG_ADDR 0x0A90UL +#define HW_HOST_FLOW_DMA_SW_INT5_REG_ADDR 0x0A94UL +#define HW_HOST_FLOW_DMA_SW_INT6_REG_ADDR 0x0A98UL +#define HW_HOST_FLOW_DMA_SW_INT7_REG_ADDR 0x0A9cUL +#define HW_HOST_SEP_HOST_GPR0_REG_ADDR 0x0B00UL +#define HW_HOST_SEP_HOST_GPR1_REG_ADDR 0x0B04UL +#define HW_HOST_SEP_HOST_GPR2_REG_ADDR 0x0B08UL +#define HW_HOST_SEP_HOST_GPR3_REG_ADDR 0x0B0CUL +#define HW_HOST_HOST_SEP_GPR0_REG_ADDR 0x0B80UL +#define HW_HOST_HOST_SEP_GPR1_REG_ADDR 0x0B84UL +#define HW_HOST_HOST_SEP_GPR2_REG_ADDR 0x0B88UL +#define HW_HOST_HOST_SEP_GPR3_REG_ADDR 0x0B8CUL +#define HW_HOST_HOST_ENDIAN_REG_ADDR 0x0B90UL +#define HW_HOST_HOST_COMM_CLK_EN_REG_ADDR 0x0B94UL +#define HW_CLR_SRAM_BUSY_REG_REG_ADDR 0x0F0CUL +#define HW_CC_SRAM_BASE_ADDRESS 0x5800UL + +#endif /* ifndef HW_DEFS */ diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index e3786f1..8fa8db2 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -117,8 +117,6 @@ source "drivers/staging/hv/Kconfig" source "drivers/staging/vme/Kconfig" -source "drivers/staging/sep/Kconfig" - source "drivers/staging/iio/Kconfig" source "drivers/staging/cs5535_gpio/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 1d11306..29cfef3 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -41,7 +41,6 @@ obj-$(CONFIG_VT6655) += vt6655/ obj-$(CONFIG_VT6656) += vt6656/ obj-$(CONFIG_HYPERV) += hv/ obj-$(CONFIG_VME_BUS) += vme/ -obj-$(CONFIG_DX_SEP) += sep/ obj-$(CONFIG_IIO) += iio/ obj-$(CONFIG_CS5535_GPIO) += cs5535_gpio/ obj-$(CONFIG_ZRAM) += zram/ diff --git a/drivers/staging/sep/Kconfig b/drivers/staging/sep/Kconfig deleted file mode 100644 index 92bf166..0000000 --- a/drivers/staging/sep/Kconfig +++ /dev/null @@ -1,10 +0,0 @@ -config DX_SEP - tristate "Discretix SEP driver" - depends on PCI - help - Discretix SEP driver; used for the security processor subsystem - on bard the Intel Mobile Internet Device. - - The driver's name is sep_driver. - - If unsure, select N. diff --git a/drivers/staging/sep/Makefile b/drivers/staging/sep/Makefile deleted file mode 100644 index 628d5f9..0000000 --- a/drivers/staging/sep/Makefile +++ /dev/null @@ -1,2 +0,0 @@ -obj-$(CONFIG_DX_SEP) := sep_driver.o - diff --git a/drivers/staging/sep/TODO b/drivers/staging/sep/TODO deleted file mode 100644 index 8f3b878..0000000 --- a/drivers/staging/sep/TODO +++ /dev/null @@ -1,4 +0,0 @@ -Todo's so far (from Alan Cox) -- Check whether it can be plugged into any of the kernel crypto API - interfaces - Crypto API 'glue' is still not ready to submit -- Clean up un-needed debug prints - Started to work on this diff --git a/drivers/staging/sep/sep_dev.h b/drivers/staging/sep/sep_dev.h deleted file mode 100644 index 696ab0d..0000000 --- a/drivers/staging/sep/sep_dev.h +++ /dev/null @@ -1,131 +0,0 @@ -#ifndef __SEP_DEV_H__ -#define __SEP_DEV_H__ - -/* - * - * sep_dev.h - Security Processor Device Structures - * - * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. - * Contributions(c) 2009,2010 Discretix. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * CONTACTS: - * - * Mark Allyn mark.a.allyn@intel.com - * Jayant Mangalampalli jayant.mangalampalli@intel.com - * - * CHANGES - * 2010.09.14 upgrade to Medfield - */ - -struct sep_device { - /* pointer to pci dev */ - struct pci_dev *pdev; - - /* character device file */ - struct cdev sep_cdev; - struct cdev sep_daemon_cdev; - struct cdev sep_singleton_cdev; - - /* devices (using misc dev) */ - struct miscdevice miscdev_sep; - struct miscdevice miscdev_singleton; - struct miscdevice miscdev_daemon; - - /* major / minor numbers of device */ - dev_t sep_devno; - dev_t sep_daemon_devno; - dev_t sep_singleton_devno; - - struct mutex sep_mutex; - struct mutex ioctl_mutex; - spinlock_t snd_rply_lck; - - /* flags to indicate use and lock status of sep */ - u32 pid_doing_transaction; - unsigned long in_use_flags; - - /* request daemon alread open */ - unsigned long request_daemon_open; - - /* 1 = Moorestown; 0 = Medfield */ - int mrst; - - /* address of the shared memory allocated during init for SEP driver - (coherent alloc) */ - dma_addr_t shared_bus; - size_t shared_size; - void *shared_addr; - - /* start address of the access to the SEP registers from driver */ - dma_addr_t reg_physical_addr; - dma_addr_t reg_physical_end; - void __iomem *reg_addr; - - /* wait queue head (event) of the driver */ - wait_queue_head_t event; - wait_queue_head_t event_request_daemon; - wait_queue_head_t event_mmap; - - struct sep_caller_id_entry - caller_id_table[SEP_CALLER_ID_TABLE_NUM_ENTRIES]; - - /* access flag for singleton device */ - unsigned long singleton_access_flag; - - /* transaction counter that coordinates the - transactions between SEP and HOST */ - unsigned long send_ct; - /* counter for the messages from sep */ - unsigned long reply_ct; - /* counter for the number of bytes allocated in the pool for the - current transaction */ - long data_pool_bytes_allocated; - - u32 num_of_data_allocations; - - /* number of the lli tables created in the current transaction */ - u32 num_lli_tables_created; - - /* number of data control blocks */ - u32 nr_dcb_creat; - - struct sep_dma_resource dma_res_arr[SEP_MAX_NUM_SYNC_DMA_OPS]; - -}; - -static inline void sep_write_reg(struct sep_device *dev, int reg, u32 value) -{ - void __iomem *addr = dev->reg_addr + reg; - writel(value, addr); -} - -static inline u32 sep_read_reg(struct sep_device *dev, int reg) -{ - void __iomem *addr = dev->reg_addr + reg; - return readl(addr); -} - -/* wait for SRAM write complete(indirect write */ -static inline void sep_wait_sram_write(struct sep_device *dev) -{ - u32 reg_val; - do { - reg_val = sep_read_reg(dev, HW_SRAM_DATA_READY_REG_ADDR); - } while (!(reg_val & 1)); -} - - -#endif diff --git a/drivers/staging/sep/sep_driver.c b/drivers/staging/sep/sep_driver.c deleted file mode 100644 index 890eede..0000000 --- a/drivers/staging/sep/sep_driver.c +++ /dev/null @@ -1,2928 +0,0 @@ -/* - * - * sep_driver.c - Security Processor Driver main group of functions - * - * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. - * Contributions(c) 2009,2010 Discretix. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * CONTACTS: - * - * Mark Allyn mark.a.allyn@intel.com - * Jayant Mangalampalli jayant.mangalampalli@intel.com - * - * CHANGES: - * - * 2009.06.26 Initial publish - * 2010.09.14 Upgrade to Medfield - * - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "sep_driver_hw_defs.h" -#include "sep_driver_config.h" -#include "sep_driver_api.h" -#include "sep_dev.h" - -/*---------------------------------------- - DEFINES ------------------------------------------*/ - -#define SEP_RAR_IO_MEM_REGION_SIZE 0x40000 - -/*-------------------------------------------- - GLOBAL variables ---------------------------------------------*/ - -/* Keep this a single static object for now to keep the conversion easy */ - -static struct sep_device *sep_dev; - -/** - * sep_dump_message - dump the message that is pending - * @sep: SEP device - */ -static void sep_dump_message(struct sep_device *sep) -{ - int count; - u32 *p = sep->shared_addr; - for (count = 0; count < 12 * 4; count += 4) - dev_dbg(&sep->pdev->dev, "Word %d of the message is %x\n", - count, *p++); -} - -/** - * sep_map_and_alloc_shared_area - allocate shared block - * @sep: security processor - * @size: size of shared area - */ -static int sep_map_and_alloc_shared_area(struct sep_device *sep) -{ - sep->shared_addr = dma_alloc_coherent(&sep->pdev->dev, - sep->shared_size, - &sep->shared_bus, GFP_KERNEL); - - if (!sep->shared_addr) { - dev_warn(&sep->pdev->dev, - "shared memory dma_alloc_coherent failed\n"); - return -ENOMEM; - } - dev_dbg(&sep->pdev->dev, - "shared_addr %zx bytes @%p (bus %llx)\n", - sep->shared_size, sep->shared_addr, - (unsigned long long)sep->shared_bus); - return 0; -} - -/** - * sep_unmap_and_free_shared_area - free shared block - * @sep: security processor - */ -static void sep_unmap_and_free_shared_area(struct sep_device *sep) -{ - dma_free_coherent(&sep->pdev->dev, sep->shared_size, - sep->shared_addr, sep->shared_bus); -} - -/** - * sep_shared_bus_to_virt - convert bus/virt addresses - * @sep: pointer to struct sep_device - * @bus_address: address to convert - * - * Returns virtual address inside the shared area according - * to the bus address. - */ -static void *sep_shared_bus_to_virt(struct sep_device *sep, - dma_addr_t bus_address) -{ - return sep->shared_addr + (bus_address - sep->shared_bus); -} - -/** - * open function for the singleton driver - * @inode_ptr struct inode * - * @file_ptr struct file * - * - * Called when the user opens the singleton device interface - */ -static int sep_singleton_open(struct inode *inode_ptr, struct file *file_ptr) -{ - struct sep_device *sep; - - /* - * Get the SEP device structure and use it for the - * private_data field in filp for other methods - */ - sep = sep_dev; - - file_ptr->private_data = sep; - - if (test_and_set_bit(0, &sep->singleton_access_flag)) - return -EBUSY; - return 0; -} - -/** - * sep_open - device open method - * @inode: inode of SEP device - * @filp: file handle to SEP device - * - * Open method for the SEP device. Called when userspace opens - * the SEP device node. - * - * Returns zero on success otherwise an error code. - */ -static int sep_open(struct inode *inode, struct file *filp) -{ - struct sep_device *sep; - - /* - * Get the SEP device structure and use it for the - * private_data field in filp for other methods - */ - sep = sep_dev; - filp->private_data = sep; - - /* Anyone can open; locking takes place at transaction level */ - return 0; -} - -/** - * sep_singleton_release - close a SEP singleton device - * @inode: inode of SEP device - * @filp: file handle being closed - * - * Called on the final close of a SEP device. As the open protects against - * multiple simultaenous opens that means this method is called when the - * final reference to the open handle is dropped. - */ -static int sep_singleton_release(struct inode *inode, struct file *filp) -{ - struct sep_device *sep = filp->private_data; - - clear_bit(0, &sep->singleton_access_flag); - return 0; -} - -/** - * sep_request_daemonopen - request daemon open method - * @inode: inode of SEP device - * @filp: file handle to SEP device - * - * Open method for the SEP request daemon. Called when - * request daemon in userspace opens the SEP device node. - * - * Returns zero on success otherwise an error code. - */ -static int sep_request_daemon_open(struct inode *inode, struct file *filp) -{ - struct sep_device *sep = sep_dev; - int error = 0; - - filp->private_data = sep; - - /* There is supposed to be only one request daemon */ - if (test_and_set_bit(0, &sep->request_daemon_open)) - error = -EBUSY; - return error; -} - -/** - * sep_request_daemon_release - close a SEP daemon - * @inode: inode of SEP device - * @filp: file handle being closed - * - * Called on the final close of a SEP daemon. - */ -static int sep_request_daemon_release(struct inode *inode, struct file *filp) -{ - struct sep_device *sep = filp->private_data; - - dev_dbg(&sep->pdev->dev, "Request daemon release for pid %d\n", - current->pid); - - /* Clear the request_daemon_open flag */ - clear_bit(0, &sep->request_daemon_open); - return 0; -} - -/** - * sep_req_daemon_send_reply_command_handler - poke the SEP - * @sep: struct sep_device * - * - * This function raises interrupt to SEPm that signals that is has a - * new command from HOST - */ -static int sep_req_daemon_send_reply_command_handler(struct sep_device *sep) -{ - unsigned long lck_flags; - - sep_dump_message(sep); - - /* Counters are lockable region */ - spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); - sep->send_ct++; - sep->reply_ct++; - - /* Send the interrupt to SEP */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR2_REG_ADDR, sep->send_ct); - sep->send_ct++; - - spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); - - dev_dbg(&sep->pdev->dev, - "sep_req_daemon_send_reply send_ct %lx reply_ct %lx\n", - sep->send_ct, sep->reply_ct); - - return 0; -} - - -/** - * sep_free_dma_table_data_handler - free DMA table - * @sep: pointere to struct sep_device - * - * Handles the request to free DMA table for synchronic actions - */ -static int sep_free_dma_table_data_handler(struct sep_device *sep) -{ - int count; - int dcb_counter; - /* Pointer to the current dma_resource struct */ - struct sep_dma_resource *dma; - - for (dcb_counter = 0; dcb_counter < sep->nr_dcb_creat; dcb_counter++) { - dma = &sep->dma_res_arr[dcb_counter]; - - /* Unmap and free input map array */ - if (dma->in_map_array) { - for (count = 0; count < dma->in_num_pages; count++) { - dma_unmap_page(&sep->pdev->dev, - dma->in_map_array[count].dma_addr, - dma->in_map_array[count].size, - DMA_TO_DEVICE); - } - kfree(dma->in_map_array); - } - - /* Unmap output map array, DON'T free it yet */ - if (dma->out_map_array) { - for (count = 0; count < dma->out_num_pages; count++) { - dma_unmap_page(&sep->pdev->dev, - dma->out_map_array[count].dma_addr, - dma->out_map_array[count].size, - DMA_FROM_DEVICE); - } - kfree(dma->out_map_array); - } - - /* Free page cache for output */ - if (dma->in_page_array) { - for (count = 0; count < dma->in_num_pages; count++) { - flush_dcache_page(dma->in_page_array[count]); - page_cache_release(dma->in_page_array[count]); - } - kfree(dma->in_page_array); - } - - if (dma->out_page_array) { - for (count = 0; count < dma->out_num_pages; count++) { - if (!PageReserved(dma->out_page_array[count])) - SetPageDirty(dma->out_page_array[count]); - flush_dcache_page(dma->out_page_array[count]); - page_cache_release(dma->out_page_array[count]); - } - kfree(dma->out_page_array); - } - - /* Reset all the values */ - dma->in_page_array = NULL; - dma->out_page_array = NULL; - dma->in_num_pages = 0; - dma->out_num_pages = 0; - dma->in_map_array = NULL; - dma->out_map_array = NULL; - dma->in_map_num_entries = 0; - dma->out_map_num_entries = 0; - } - - sep->nr_dcb_creat = 0; - sep->num_lli_tables_created = 0; - - return 0; -} - -/** - * sep_request_daemon_mmap - maps the shared area to user space - * @filp: pointer to struct file - * @vma: pointer to vm_area_struct - * - * Called by the kernel when the daemon attempts an mmap() syscall - * using our handle. - */ -static int sep_request_daemon_mmap(struct file *filp, - struct vm_area_struct *vma) -{ - struct sep_device *sep = filp->private_data; - dma_addr_t bus_address; - int error = 0; - - if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) { - error = -EINVAL; - goto end_function; - } - - /* Get physical address */ - bus_address = sep->shared_bus; - - if (remap_pfn_range(vma, vma->vm_start, bus_address >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, vma->vm_page_prot)) { - - dev_warn(&sep->pdev->dev, "remap_page_range failed\n"); - error = -EAGAIN; - goto end_function; - } - -end_function: - return error; -} - -/** - * sep_request_daemon_poll - poll implementation - * @sep: struct sep_device * for current SEP device - * @filp: struct file * for open file - * @wait: poll_table * for poll - * - * Called when our device is part of a poll() or select() syscall - */ -static unsigned int sep_request_daemon_poll(struct file *filp, - poll_table *wait) -{ - u32 mask = 0; - /* GPR2 register */ - u32 retval2; - unsigned long lck_flags; - struct sep_device *sep = filp->private_data; - - poll_wait(filp, &sep->event_request_daemon, wait); - - dev_dbg(&sep->pdev->dev, "daemon poll: send_ct is %lx reply ct is %lx\n", - sep->send_ct, sep->reply_ct); - - spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); - /* Check if the data is ready */ - if (sep->send_ct == sep->reply_ct) { - spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); - - retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); - dev_dbg(&sep->pdev->dev, - "daemon poll: data check (GPR2) is %x\n", retval2); - - /* Check if PRINT request */ - if ((retval2 >> 30) & 0x1) { - dev_dbg(&sep->pdev->dev, "daemon poll: PRINTF request in\n"); - mask |= POLLIN; - goto end_function; - } - /* Check if NVS request */ - if (retval2 >> 31) { - dev_dbg(&sep->pdev->dev, "daemon poll: NVS request in\n"); - mask |= POLLPRI | POLLWRNORM; - } - } else { - spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); - dev_dbg(&sep->pdev->dev, - "daemon poll: no reply received; returning 0\n"); - mask = 0; - } -end_function: - return mask; -} - -/** - * sep_release - close a SEP device - * @inode: inode of SEP device - * @filp: file handle being closed - * - * Called on the final close of a SEP device. - */ -static int sep_release(struct inode *inode, struct file *filp) -{ - struct sep_device *sep = filp->private_data; - - dev_dbg(&sep->pdev->dev, "Release for pid %d\n", current->pid); - - mutex_lock(&sep->sep_mutex); - /* Is this the process that has a transaction open? - * If so, lets reset pid_doing_transaction to 0 and - * clear the in use flags, and then wake up sep_event - * so that other processes can do transactions - */ - if (sep->pid_doing_transaction == current->pid) { - clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags); - clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags); - sep_free_dma_table_data_handler(sep); - wake_up(&sep->event); - sep->pid_doing_transaction = 0; - } - - mutex_unlock(&sep->sep_mutex); - return 0; -} - -/** - * sep_mmap - maps the shared area to user space - * @filp: pointer to struct file - * @vma: pointer to vm_area_struct - * - * Called on an mmap of our space via the normal SEP device - */ -static int sep_mmap(struct file *filp, struct vm_area_struct *vma) -{ - dma_addr_t bus_addr; - struct sep_device *sep = filp->private_data; - unsigned long error = 0; - - /* Set the transaction busy (own the device) */ - wait_event_interruptible(sep->event, - test_and_set_bit(SEP_MMAP_LOCK_BIT, - &sep->in_use_flags) == 0); - - if (signal_pending(current)) { - error = -EINTR; - goto end_function_with_error; - } - /* - * The pid_doing_transaction indicates that this process - * now owns the facilities to performa a transaction with - * the SEP. While this process is performing a transaction, - * no other process who has the SEP device open can perform - * any transactions. This method allows more than one process - * to have the device open at any given time, which provides - * finer granularity for device utilization by multiple - * processes. - */ - mutex_lock(&sep->sep_mutex); - sep->pid_doing_transaction = current->pid; - mutex_unlock(&sep->sep_mutex); - - /* Zero the pools and the number of data pool alocation pointers */ - sep->data_pool_bytes_allocated = 0; - sep->num_of_data_allocations = 0; - - /* - * Check that the size of the mapped range is as the size of the message - * shared area - */ - if ((vma->vm_end - vma->vm_start) > SEP_DRIVER_MMMAP_AREA_SIZE) { - error = -EINVAL; - goto end_function_with_error; - } - - dev_dbg(&sep->pdev->dev, "shared_addr is %p\n", sep->shared_addr); - - /* Get bus address */ - bus_addr = sep->shared_bus; - - if (remap_pfn_range(vma, vma->vm_start, bus_addr >> PAGE_SHIFT, - vma->vm_end - vma->vm_start, vma->vm_page_prot)) { - dev_warn(&sep->pdev->dev, "remap_page_range failed\n"); - error = -EAGAIN; - goto end_function_with_error; - } - goto end_function; - -end_function_with_error: - /* Clear the bit */ - clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags); - mutex_lock(&sep->sep_mutex); - sep->pid_doing_transaction = 0; - mutex_unlock(&sep->sep_mutex); - - /* Raise event for stuck contextes */ - - wake_up(&sep->event); - -end_function: - return error; -} - -/** - * sep_poll - poll handler - * @filp: pointer to struct file - * @wait: pointer to poll_table - * - * Called by the OS when the kernel is asked to do a poll on - * a SEP file handle. - */ -static unsigned int sep_poll(struct file *filp, poll_table *wait) -{ - u32 mask = 0; - u32 retval = 0; - u32 retval2 = 0; - unsigned long lck_flags; - - struct sep_device *sep = filp->private_data; - - /* Am I the process that owns the transaction? */ - mutex_lock(&sep->sep_mutex); - if (current->pid != sep->pid_doing_transaction) { - dev_dbg(&sep->pdev->dev, "poll; wrong pid\n"); - mask = POLLERR; - mutex_unlock(&sep->sep_mutex); - goto end_function; - } - mutex_unlock(&sep->sep_mutex); - - /* Check if send command or send_reply were activated previously */ - if (!test_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) { - mask = POLLERR; - goto end_function; - } - - /* Add the event to the polling wait table */ - dev_dbg(&sep->pdev->dev, "poll: calling wait sep_event\n"); - - poll_wait(filp, &sep->event, wait); - - dev_dbg(&sep->pdev->dev, "poll: send_ct is %lx reply ct is %lx\n", - sep->send_ct, sep->reply_ct); - - /* Check if error occurred during poll */ - retval2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR3_REG_ADDR); - if (retval2 != 0x0) { - dev_warn(&sep->pdev->dev, "poll; poll error %x\n", retval2); - mask |= POLLERR; - goto end_function; - } - - spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); - - if (sep->send_ct == sep->reply_ct) { - spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); - retval = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); - dev_dbg(&sep->pdev->dev, "poll: data ready check (GPR2) %x\n", - retval); - - /* Check if printf request */ - if ((retval >> 30) & 0x1) { - dev_dbg(&sep->pdev->dev, "poll: SEP printf request\n"); - wake_up(&sep->event_request_daemon); - goto end_function; - } - - /* Check if the this is SEP reply or request */ - if (retval >> 31) { - dev_dbg(&sep->pdev->dev, "poll: SEP request\n"); - wake_up(&sep->event_request_daemon); - } else { - dev_dbg(&sep->pdev->dev, "poll: normal return\n"); - /* In case it is again by send_reply_comand */ - clear_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags); - sep_dump_message(sep); - dev_dbg(&sep->pdev->dev, - "poll; SEP reply POLLIN | POLLRDNORM\n"); - mask |= POLLIN | POLLRDNORM; - } - } else { - spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); - dev_dbg(&sep->pdev->dev, - "poll; no reply received; returning mask of 0\n"); - mask = 0; - } - -end_function: - return mask; -} - -/** - * sep_time_address - address in SEP memory of time - * @sep: SEP device we want the address from - * - * Return the address of the two dwords in memory used for time - * setting. - */ -static u32 *sep_time_address(struct sep_device *sep) -{ - return sep->shared_addr + SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES; -} - -/** - * sep_set_time - set the SEP time - * @sep: the SEP we are setting the time for - * - * Calculates time and sets it at the predefined address. - * Called with the SEP mutex held. - */ -static unsigned long sep_set_time(struct sep_device *sep) -{ - struct timeval time; - u32 *time_addr; /* Address of time as seen by the kernel */ - - - do_gettimeofday(&time); - - /* Set value in the SYSTEM MEMORY offset */ - time_addr = sep_time_address(sep); - - time_addr[0] = SEP_TIME_VAL_TOKEN; - time_addr[1] = time.tv_sec; - - dev_dbg(&sep->pdev->dev, "time.tv_sec is %lu\n", time.tv_sec); - dev_dbg(&sep->pdev->dev, "time_addr is %p\n", time_addr); - dev_dbg(&sep->pdev->dev, "sep->shared_addr is %p\n", sep->shared_addr); - - return time.tv_sec; -} - -/** - * sep_set_caller_id_handler - insert caller id entry - * @sep: SEP device - * @arg: pointer to struct caller_id_struct - * - * Inserts the data into the caller id table. Note that this function - * falls under the ioctl lock - */ -static int sep_set_caller_id_handler(struct sep_device *sep, unsigned long arg) -{ - void __user *hash; - int error = 0; - int i; - struct caller_id_struct command_args; - - for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) { - if (sep->caller_id_table[i].pid == 0) - break; - } - - if (i == SEP_CALLER_ID_TABLE_NUM_ENTRIES) { - dev_dbg(&sep->pdev->dev, "no more caller id entries left\n"); - dev_dbg(&sep->pdev->dev, "maximum number is %d\n", - SEP_CALLER_ID_TABLE_NUM_ENTRIES); - error = -EUSERS; - goto end_function; - } - - /* Copy the data */ - if (copy_from_user(&command_args, (void __user *)arg, - sizeof(command_args))) { - error = -EFAULT; - goto end_function; - } - - hash = (void __user *)(unsigned long)command_args.callerIdAddress; - - if (!command_args.pid || !command_args.callerIdSizeInBytes) { - error = -EINVAL; - goto end_function; - } - - dev_dbg(&sep->pdev->dev, "pid is %x\n", command_args.pid); - dev_dbg(&sep->pdev->dev, "callerIdSizeInBytes is %x\n", - command_args.callerIdSizeInBytes); - - if (command_args.callerIdSizeInBytes > - SEP_CALLER_ID_HASH_SIZE_IN_BYTES) { - error = -EMSGSIZE; - goto end_function; - } - - sep->caller_id_table[i].pid = command_args.pid; - - if (copy_from_user(sep->caller_id_table[i].callerIdHash, - hash, command_args.callerIdSizeInBytes)) - error = -EFAULT; -end_function: - return error; -} - -/** - * sep_set_current_caller_id - set the caller id - * @sep: pointer to struct_sep_device - * - * Set the caller ID (if it exists) to the SEP. Note that this - * function falls under the ioctl lock - */ -static int sep_set_current_caller_id(struct sep_device *sep) -{ - int i; - u32 *hash_buf_ptr; - - /* Zero the previous value */ - memset(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES, - 0, SEP_CALLER_ID_HASH_SIZE_IN_BYTES); - - for (i = 0; i < SEP_CALLER_ID_TABLE_NUM_ENTRIES; i++) { - if (sep->caller_id_table[i].pid == current->pid) { - dev_dbg(&sep->pdev->dev, "Caller Id found\n"); - - memcpy(sep->shared_addr + SEP_CALLER_ID_OFFSET_BYTES, - (void *)(sep->caller_id_table[i].callerIdHash), - SEP_CALLER_ID_HASH_SIZE_IN_BYTES); - break; - } - } - /* Ensure data is in little endian */ - hash_buf_ptr = (u32 *)sep->shared_addr + - SEP_CALLER_ID_OFFSET_BYTES; - - for (i = 0; i < SEP_CALLER_ID_HASH_SIZE_IN_WORDS; i++) - hash_buf_ptr[i] = cpu_to_le32(hash_buf_ptr[i]); - - return 0; -} - -/** - * sep_send_command_handler - kick off a command - * @sep: SEP being signalled - * - * This function raises interrupt to SEP that signals that is has a new - * command from the host - * - * Note that this function does fall under the ioctl lock - */ -static int sep_send_command_handler(struct sep_device *sep) -{ - unsigned long lck_flags; - int error = 0; - - if (test_and_set_bit(SEP_SEND_MSG_LOCK_BIT, &sep->in_use_flags)) { - error = -EPROTO; - goto end_function; - } - sep_set_time(sep); - - sep_set_current_caller_id(sep); - - sep_dump_message(sep); - - /* Update counter */ - spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); - sep->send_ct++; - spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); - - dev_dbg(&sep->pdev->dev, - "sep_send_command_handler send_ct %lx reply_ct %lx\n", - sep->send_ct, sep->reply_ct); - - /* Send interrupt to SEP */ - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR0_REG_ADDR, 0x2); - -end_function: - return error; -} - -/** - * sep_allocate_data_pool_memory_handler -allocate pool memory - * @sep: pointer to struct sep_device - * @arg: pointer to struct alloc_struct - * - * This function handles the allocate data pool memory request - * This function returns calculates the bus address of the - * allocated memory, and the offset of this area from the mapped address. - * Therefore, the FVOs in user space can calculate the exact virtual - * address of this allocated memory - */ -static int sep_allocate_data_pool_memory_handler(struct sep_device *sep, - unsigned long arg) -{ - int error = 0; - struct alloc_struct command_args; - - /* Holds the allocated buffer address in the system memory pool */ - u32 *token_addr; - - if (copy_from_user(&command_args, (void __user *)arg, - sizeof(struct alloc_struct))) { - error = -EFAULT; - goto end_function; - } - - /* Allocate memory */ - if ((sep->data_pool_bytes_allocated + command_args.num_bytes) > - SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) { - error = -ENOMEM; - goto end_function; - } - - dev_dbg(&sep->pdev->dev, - "data pool bytes_allocated: %x\n", (int)sep->data_pool_bytes_allocated); - dev_dbg(&sep->pdev->dev, - "offset: %x\n", SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES); - /* Set the virtual and bus address */ - command_args.offset = SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + - sep->data_pool_bytes_allocated; - - /* Place in the shared area that is known by the SEP */ - token_addr = (u32 *)(sep->shared_addr + - SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES + - (sep->num_of_data_allocations)*2*sizeof(u32)); - - token_addr[0] = SEP_DATA_POOL_POINTERS_VAL_TOKEN; - token_addr[1] = (u32)sep->shared_bus + - SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + - sep->data_pool_bytes_allocated; - - /* Write the memory back to the user space */ - error = copy_to_user((void *)arg, (void *)&command_args, - sizeof(struct alloc_struct)); - if (error) { - error = -EFAULT; - goto end_function; - } - - /* Update the allocation */ - sep->data_pool_bytes_allocated += command_args.num_bytes; - sep->num_of_data_allocations += 1; - -end_function: - return error; -} - -/** - * sep_lock_kernel_pages - map kernel pages for DMA - * @sep: pointer to struct sep_device - * @kernel_virt_addr: address of data buffer in kernel - * @data_size: size of data - * @lli_array_ptr: lli array - * @in_out_flag: input into device or output from device - * - * This function locks all the physical pages of the kernel virtual buffer - * and construct a basic lli array, where each entry holds the physical - * page address and the size that application data holds in this page - * This function is used only during kernel crypto mod calls from within - * the kernel (when ioctl is not used) - */ -static int sep_lock_kernel_pages(struct sep_device *sep, - unsigned long kernel_virt_addr, - u32 data_size, - struct sep_lli_entry **lli_array_ptr, - int in_out_flag) - -{ - int error = 0; - /* Array of lli */ - struct sep_lli_entry *lli_array; - /* Map array */ - struct sep_dma_map *map_array; - - dev_dbg(&sep->pdev->dev, "lock kernel pages kernel_virt_addr is %08lx\n", - (unsigned long)kernel_virt_addr); - dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size); - - lli_array = kmalloc(sizeof(struct sep_lli_entry), GFP_ATOMIC); - if (!lli_array) { - error = -ENOMEM; - goto end_function; - } - map_array = kmalloc(sizeof(struct sep_dma_map), GFP_ATOMIC); - if (!map_array) { - error = -ENOMEM; - goto end_function_with_error; - } - - map_array[0].dma_addr = - dma_map_single(&sep->pdev->dev, (void *)kernel_virt_addr, - data_size, DMA_BIDIRECTIONAL); - map_array[0].size = data_size; - - - /* - * Set the start address of the first page - app data may start not at - * the beginning of the page - */ - lli_array[0].bus_address = (u32)map_array[0].dma_addr; - lli_array[0].block_size = map_array[0].size; - - dev_dbg(&sep->pdev->dev, - "lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n", - (unsigned long)lli_array[0].bus_address, - lli_array[0].block_size); - - /* Set the output parameters */ - if (in_out_flag == SEP_DRIVER_IN_FLAG) { - *lli_array_ptr = lli_array; - sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 1; - sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL; - sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array; - sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries = 1; - } else { - *lli_array_ptr = lli_array; - sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = 1; - sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL; - sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array; - sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries = 1; - } - goto end_function; - -end_function_with_error: - kfree(lli_array); - -end_function: - return error; -} - -/** - * sep_lock_user_pages - lock and map user pages for DMA - * @sep: pointer to struct sep_device - * @app_virt_addr: user memory data buffer - * @data_size: size of data buffer - * @lli_array_ptr: lli array - * @in_out_flag: input or output to device - * - * This function locks all the physical pages of the application - * virtual buffer and construct a basic lli array, where each entry - * holds the physical page address and the size that application - * data holds in this physical pages - */ -static int sep_lock_user_pages(struct sep_device *sep, - u32 app_virt_addr, - u32 data_size, - struct sep_lli_entry **lli_array_ptr, - int in_out_flag) - -{ - int error = 0; - u32 count; - int result; - /* The the page of the end address of the user space buffer */ - u32 end_page; - /* The page of the start address of the user space buffer */ - u32 start_page; - /* The range in pages */ - u32 num_pages; - /* Array of pointers to page */ - struct page **page_array; - /* Array of lli */ - struct sep_lli_entry *lli_array; - /* Map array */ - struct sep_dma_map *map_array; - /* Direction of the DMA mapping for locked pages */ - enum dma_data_direction dir; - - /* Set start and end pages and num pages */ - end_page = (app_virt_addr + data_size - 1) >> PAGE_SHIFT; - start_page = app_virt_addr >> PAGE_SHIFT; - num_pages = end_page - start_page + 1; - - dev_dbg(&sep->pdev->dev, "lock user pages app_virt_addr is %x\n", app_virt_addr); - dev_dbg(&sep->pdev->dev, "data_size is %x\n", data_size); - dev_dbg(&sep->pdev->dev, "start_page is %x\n", start_page); - dev_dbg(&sep->pdev->dev, "end_page is %x\n", end_page); - dev_dbg(&sep->pdev->dev, "num_pages is %x\n", num_pages); - - /* Allocate array of pages structure pointers */ - page_array = kmalloc(sizeof(struct page *) * num_pages, GFP_ATOMIC); - if (!page_array) { - error = -ENOMEM; - goto end_function; - } - map_array = kmalloc(sizeof(struct sep_dma_map) * num_pages, GFP_ATOMIC); - if (!map_array) { - dev_warn(&sep->pdev->dev, "kmalloc for map_array failed\n"); - error = -ENOMEM; - goto end_function_with_error1; - } - - lli_array = kmalloc(sizeof(struct sep_lli_entry) * num_pages, - GFP_ATOMIC); - - if (!lli_array) { - dev_warn(&sep->pdev->dev, "kmalloc for lli_array failed\n"); - error = -ENOMEM; - goto end_function_with_error2; - } - - /* Convert the application virtual address into a set of physical */ - down_read(¤t->mm->mmap_sem); - result = get_user_pages(current, current->mm, app_virt_addr, - num_pages, - ((in_out_flag == SEP_DRIVER_IN_FLAG) ? 0 : 1), - 0, page_array, NULL); - - up_read(¤t->mm->mmap_sem); - - /* Check the number of pages locked - if not all then exit with error */ - if (result != num_pages) { - dev_warn(&sep->pdev->dev, - "not all pages locked by get_user_pages\n"); - error = -ENOMEM; - goto end_function_with_error3; - } - - dev_dbg(&sep->pdev->dev, "get_user_pages succeeded\n"); - - /* Set direction */ - if (in_out_flag == SEP_DRIVER_IN_FLAG) - dir = DMA_TO_DEVICE; - else - dir = DMA_FROM_DEVICE; - - /* - * Fill the array using page array data and - * map the pages - this action will also flush the cache as needed - */ - for (count = 0; count < num_pages; count++) { - /* Fill the map array */ - map_array[count].dma_addr = - dma_map_page(&sep->pdev->dev, page_array[count], - 0, PAGE_SIZE, /*dir*/DMA_BIDIRECTIONAL); - - map_array[count].size = PAGE_SIZE; - - /* Fill the lli array entry */ - lli_array[count].bus_address = (u32)map_array[count].dma_addr; - lli_array[count].block_size = PAGE_SIZE; - - dev_warn(&sep->pdev->dev, "lli_array[%x].bus_address is %08lx, lli_array[%x].block_size is %x\n", - count, (unsigned long)lli_array[count].bus_address, - count, lli_array[count].block_size); - } - - /* Check the offset for the first page */ - lli_array[0].bus_address = - lli_array[0].bus_address + (app_virt_addr & (~PAGE_MASK)); - - /* Check that not all the data is in the first page only */ - if ((PAGE_SIZE - (app_virt_addr & (~PAGE_MASK))) >= data_size) - lli_array[0].block_size = data_size; - else - lli_array[0].block_size = - PAGE_SIZE - (app_virt_addr & (~PAGE_MASK)); - - dev_dbg(&sep->pdev->dev, - "lli_array[0].bus_address is %08lx, lli_array[0].block_size is %x\n", - (unsigned long)lli_array[count].bus_address, - lli_array[count].block_size); - - /* Check the size of the last page */ - if (num_pages > 1) { - lli_array[num_pages - 1].block_size = - (app_virt_addr + data_size) & (~PAGE_MASK); - - dev_warn(&sep->pdev->dev, - "lli_array[%x].bus_address is %08lx, lli_array[%x].block_size is %x\n", - num_pages - 1, - (unsigned long)lli_array[count].bus_address, - num_pages - 1, - lli_array[count].block_size); - } - - /* Set output params according to the in_out flag */ - if (in_out_flag == SEP_DRIVER_IN_FLAG) { - *lli_array_ptr = lli_array; - sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = num_pages; - sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = page_array; - sep->dma_res_arr[sep->nr_dcb_creat].in_map_array = map_array; - sep->dma_res_arr[sep->nr_dcb_creat].in_map_num_entries = - num_pages; - } else { - *lli_array_ptr = lli_array; - sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages = num_pages; - sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = - page_array; - sep->dma_res_arr[sep->nr_dcb_creat].out_map_array = map_array; - sep->dma_res_arr[sep->nr_dcb_creat].out_map_num_entries = - num_pages; - } - goto end_function; - -end_function_with_error3: - /* Free lli array */ - kfree(lli_array); - -end_function_with_error2: - kfree(map_array); - -end_function_with_error1: - /* Free page array */ - kfree(page_array); - -end_function: - return error; -} - -/** - * u32 sep_calculate_lli_table_max_size - size the LLI table - * @sep: pointer to struct sep_device - * @lli_in_array_ptr - * @num_array_entries - * @last_table_flag - * - * This function calculates the size of data that can be inserted into - * the lli table from this array, such that either the table is full - * (all entries are entered), or there are no more entries in the - * lli array - */ -static u32 sep_calculate_lli_table_max_size(struct sep_device *sep, - struct sep_lli_entry *lli_in_array_ptr, - u32 num_array_entries, - u32 *last_table_flag) -{ - u32 counter; - /* Table data size */ - u32 table_data_size = 0; - /* Data size for the next table */ - u32 next_table_data_size; - - *last_table_flag = 0; - - /* - * Calculate the data in the out lli table till we fill the whole - * table or till the data has ended - */ - for (counter = 0; - (counter < (SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP - 1)) && - (counter < num_array_entries); counter++) - table_data_size += lli_in_array_ptr[counter].block_size; - - /* - * Check if we reached the last entry, - * meaning this ia the last table to build, - * and no need to check the block alignment - */ - if (counter == num_array_entries) { - /* Set the last table flag */ - *last_table_flag = 1; - goto end_function; - } - - /* - * Calculate the data size of the next table. - * Stop if no entries left or if data size is more the DMA restriction - */ - next_table_data_size = 0; - for (; counter < num_array_entries; counter++) { - next_table_data_size += lli_in_array_ptr[counter].block_size; - if (next_table_data_size >= SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) - break; - } - - /* - * Check if the next table data size is less then DMA rstriction. - * if it is - recalculate the current table size, so that the next - * table data size will be adaquete for DMA - */ - if (next_table_data_size && - next_table_data_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) - - table_data_size -= (SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE - - next_table_data_size); - -end_function: - return table_data_size; -} - -/** - * sep_build_lli_table - build an lli array for the given table - * @sep: pointer to struct sep_device - * @lli_array_ptr: pointer to lli array - * @lli_table_ptr: pointer to lli table - * @num_processed_entries_ptr: pointer to number of entries - * @num_table_entries_ptr: pointer to number of tables - * @table_data_size: total data size - * - * Builds ant lli table from the lli_array according to - * the given size of data - */ -static void sep_build_lli_table(struct sep_device *sep, - struct sep_lli_entry *lli_array_ptr, - struct sep_lli_entry *lli_table_ptr, - u32 *num_processed_entries_ptr, - u32 *num_table_entries_ptr, - u32 table_data_size) -{ - /* Current table data size */ - u32 curr_table_data_size; - /* Counter of lli array entry */ - u32 array_counter; - - /* Init currrent table data size and lli array entry counter */ - curr_table_data_size = 0; - array_counter = 0; - *num_table_entries_ptr = 1; - - dev_dbg(&sep->pdev->dev, "build lli table table_data_size is %x\n", table_data_size); - - /* Fill the table till table size reaches the needed amount */ - while (curr_table_data_size < table_data_size) { - /* Update the number of entries in table */ - (*num_table_entries_ptr)++; - - lli_table_ptr->bus_address = - cpu_to_le32(lli_array_ptr[array_counter].bus_address); - - lli_table_ptr->block_size = - cpu_to_le32(lli_array_ptr[array_counter].block_size); - - curr_table_data_size += lli_array_ptr[array_counter].block_size; - - dev_dbg(&sep->pdev->dev, "lli_table_ptr is %p\n", - lli_table_ptr); - dev_dbg(&sep->pdev->dev, "lli_table_ptr->bus_address is %08lx\n", - (unsigned long)lli_table_ptr->bus_address); - dev_dbg(&sep->pdev->dev, "lli_table_ptr->block_size is %x\n", - lli_table_ptr->block_size); - - /* Check for overflow of the table data */ - if (curr_table_data_size > table_data_size) { - dev_dbg(&sep->pdev->dev, - "curr_table_data_size too large\n"); - - /* Update the size of block in the table */ - lli_table_ptr->block_size -= - cpu_to_le32((curr_table_data_size - table_data_size)); - - /* Update the physical address in the lli array */ - lli_array_ptr[array_counter].bus_address += - cpu_to_le32(lli_table_ptr->block_size); - - /* Update the block size left in the lli array */ - lli_array_ptr[array_counter].block_size = - (curr_table_data_size - table_data_size); - } else - /* Advance to the next entry in the lli_array */ - array_counter++; - - dev_dbg(&sep->pdev->dev, - "lli_table_ptr->bus_address is %08lx\n", - (unsigned long)lli_table_ptr->bus_address); - dev_dbg(&sep->pdev->dev, - "lli_table_ptr->block_size is %x\n", - lli_table_ptr->block_size); - - /* Move to the next entry in table */ - lli_table_ptr++; - } - - /* Set the info entry to default */ - lli_table_ptr->bus_address = 0xffffffff; - lli_table_ptr->block_size = 0; - - /* Set the output parameter */ - *num_processed_entries_ptr += array_counter; - -} - -/** - * sep_shared_area_virt_to_bus - map shared area to bus address - * @sep: pointer to struct sep_device - * @virt_address: virtual address to convert - * - * This functions returns the physical address inside shared area according - * to the virtual address. It can be either on the externa RAM device - * (ioremapped), or on the system RAM - * This implementation is for the external RAM - */ -static dma_addr_t sep_shared_area_virt_to_bus(struct sep_device *sep, - void *virt_address) -{ - dev_dbg(&sep->pdev->dev, "sh virt to phys v %p\n", virt_address); - dev_dbg(&sep->pdev->dev, "sh virt to phys p %08lx\n", - (unsigned long) - sep->shared_bus + (virt_address - sep->shared_addr)); - - return sep->shared_bus + (size_t)(virt_address - sep->shared_addr); -} - -/** - * sep_shared_area_bus_to_virt - map shared area bus address to kernel - * @sep: pointer to struct sep_device - * @bus_address: bus address to convert - * - * This functions returns the virtual address inside shared area - * according to the physical address. It can be either on the - * externa RAM device (ioremapped), or on the system RAM - * This implementation is for the external RAM - */ -static void *sep_shared_area_bus_to_virt(struct sep_device *sep, - dma_addr_t bus_address) -{ - dev_dbg(&sep->pdev->dev, "shared bus to virt b=%lx v=%lx\n", - (unsigned long)bus_address, (unsigned long)(sep->shared_addr + - (size_t)(bus_address - sep->shared_bus))); - - return sep->shared_addr + (size_t)(bus_address - sep->shared_bus); -} - -/** - * sep_debug_print_lli_tables - dump LLI table - * @sep: pointer to struct sep_device - * @lli_table_ptr: pointer to sep_lli_entry - * @num_table_entries: number of entries - * @table_data_size: total data size - * - * Walk the the list of the print created tables and print all the data - */ -static void sep_debug_print_lli_tables(struct sep_device *sep, - struct sep_lli_entry *lli_table_ptr, - unsigned long num_table_entries, - unsigned long table_data_size) -{ - unsigned long table_count = 1; - unsigned long entries_count = 0; - - dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables start\n"); - - while ((unsigned long) lli_table_ptr->bus_address != 0xffffffff) { - dev_dbg(&sep->pdev->dev, - "lli table %08lx, table_data_size is %lu\n", - table_count, table_data_size); - dev_dbg(&sep->pdev->dev, "num_table_entries is %lu\n", - num_table_entries); - - /* Print entries of the table (without info entry) */ - for (entries_count = 0; entries_count < num_table_entries; - entries_count++, lli_table_ptr++) { - - dev_dbg(&sep->pdev->dev, - "lli_table_ptr address is %08lx\n", - (unsigned long) lli_table_ptr); - - dev_dbg(&sep->pdev->dev, - "phys address is %08lx block size is %x\n", - (unsigned long)lli_table_ptr->bus_address, - lli_table_ptr->block_size); - } - /* Point to the info entry */ - lli_table_ptr--; - - dev_dbg(&sep->pdev->dev, - "phys lli_table_ptr->block_size is %x\n", - lli_table_ptr->block_size); - - dev_dbg(&sep->pdev->dev, - "phys lli_table_ptr->physical_address is %08lu\n", - (unsigned long)lli_table_ptr->bus_address); - - - table_data_size = lli_table_ptr->block_size & 0xffffff; - num_table_entries = (lli_table_ptr->block_size >> 24) & 0xff; - - dev_dbg(&sep->pdev->dev, - "phys table_data_size is %lu num_table_entries is" - " %lu bus_address is%lu\n", table_data_size, - num_table_entries, (unsigned long)lli_table_ptr->bus_address); - - if ((unsigned long)lli_table_ptr->bus_address != 0xffffffff) - lli_table_ptr = (struct sep_lli_entry *) - sep_shared_bus_to_virt(sep, - (unsigned long)lli_table_ptr->bus_address); - - table_count++; - } - dev_dbg(&sep->pdev->dev, "sep_debug_print_lli_tables end\n"); -} - - -/** - * sep_prepare_empty_lli_table - create a blank LLI table - * @sep: pointer to struct sep_device - * @lli_table_addr_ptr: pointer to lli table - * @num_entries_ptr: pointer to number of entries - * @table_data_size_ptr: point to table data size - * - * This function creates empty lli tables when there is no data - */ -static void sep_prepare_empty_lli_table(struct sep_device *sep, - dma_addr_t *lli_table_addr_ptr, - u32 *num_entries_ptr, - u32 *table_data_size_ptr) -{ - struct sep_lli_entry *lli_table_ptr; - - /* Find the area for new table */ - lli_table_ptr = - (struct sep_lli_entry *)(sep->shared_addr + - SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + - sep->num_lli_tables_created * sizeof(struct sep_lli_entry) * - SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); - - lli_table_ptr->bus_address = 0; - lli_table_ptr->block_size = 0; - - lli_table_ptr++; - lli_table_ptr->bus_address = 0xFFFFFFFF; - lli_table_ptr->block_size = 0; - - /* Set the output parameter value */ - *lli_table_addr_ptr = sep->shared_bus + - SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + - sep->num_lli_tables_created * - sizeof(struct sep_lli_entry) * - SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; - - /* Set the num of entries and table data size for empty table */ - *num_entries_ptr = 2; - *table_data_size_ptr = 0; - - /* Update the number of created tables */ - sep->num_lli_tables_created++; -} - -/** - * sep_prepare_input_dma_table - prepare input DMA mappings - * @sep: pointer to struct sep_device - * @data_size: - * @block_size: - * @lli_table_ptr: - * @num_entries_ptr: - * @table_data_size_ptr: - * @is_kva: set for kernel data (kernel cryptio call) - * - * This function prepares only input DMA table for synhronic symmetric - * operations (HASH) - * Note that all bus addresses that are passed to the SEP - * are in 32 bit format; the SEP is a 32 bit device - */ -static int sep_prepare_input_dma_table(struct sep_device *sep, - unsigned long app_virt_addr, - u32 data_size, - u32 block_size, - dma_addr_t *lli_table_ptr, - u32 *num_entries_ptr, - u32 *table_data_size_ptr, - bool is_kva) -{ - int error = 0; - /* Pointer to the info entry of the table - the last entry */ - struct sep_lli_entry *info_entry_ptr; - /* Array of pointers to page */ - struct sep_lli_entry *lli_array_ptr; - /* Points to the first entry to be processed in the lli_in_array */ - u32 current_entry = 0; - /* Num entries in the virtual buffer */ - u32 sep_lli_entries = 0; - /* Lli table pointer */ - struct sep_lli_entry *in_lli_table_ptr; - /* The total data in one table */ - u32 table_data_size = 0; - /* Flag for last table */ - u32 last_table_flag = 0; - /* Number of entries in lli table */ - u32 num_entries_in_table = 0; - /* Next table address */ - void *lli_table_alloc_addr = 0; - - dev_dbg(&sep->pdev->dev, "prepare intput dma table data_size is %x\n", data_size); - dev_dbg(&sep->pdev->dev, "block_size is %x\n", block_size); - - /* Initialize the pages pointers */ - sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL; - sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages = 0; - - /* Set the kernel address for first table to be allocated */ - lli_table_alloc_addr = (void *)(sep->shared_addr + - SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + - sep->num_lli_tables_created * sizeof(struct sep_lli_entry) * - SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); - - if (data_size == 0) { - /* Special case - create meptu table - 2 entries, zero data */ - sep_prepare_empty_lli_table(sep, lli_table_ptr, - num_entries_ptr, table_data_size_ptr); - goto update_dcb_counter; - } - - /* Check if the pages are in Kernel Virtual Address layout */ - if (is_kva == true) - /* Lock the pages in the kernel */ - error = sep_lock_kernel_pages(sep, app_virt_addr, - data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG); - else - /* - * Lock the pages of the user buffer - * and translate them to pages - */ - error = sep_lock_user_pages(sep, app_virt_addr, - data_size, &lli_array_ptr, SEP_DRIVER_IN_FLAG); - - if (error) - goto end_function; - - dev_dbg(&sep->pdev->dev, "output sep_in_num_pages is %x\n", - sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages); - - current_entry = 0; - info_entry_ptr = NULL; - - sep_lli_entries = sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages; - - /* Loop till all the entries in in array are not processed */ - while (current_entry < sep_lli_entries) { - - /* Set the new input and output tables */ - in_lli_table_ptr = - (struct sep_lli_entry *)lli_table_alloc_addr; - - lli_table_alloc_addr += sizeof(struct sep_lli_entry) * - SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; - - if (lli_table_alloc_addr > - ((void *)sep->shared_addr + - SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + - SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) { - - error = -ENOMEM; - goto end_function_error; - - } - - /* Update the number of created tables */ - sep->num_lli_tables_created++; - - /* Calculate the maximum size of data for input table */ - table_data_size = sep_calculate_lli_table_max_size(sep, - &lli_array_ptr[current_entry], - (sep_lli_entries - current_entry), - &last_table_flag); - - /* - * If this is not the last table - - * then align it to the block size - */ - if (!last_table_flag) - table_data_size = - (table_data_size / block_size) * block_size; - - dev_dbg(&sep->pdev->dev, "output table_data_size is %x\n", - table_data_size); - - /* Construct input lli table */ - sep_build_lli_table(sep, &lli_array_ptr[current_entry], - in_lli_table_ptr, - ¤t_entry, &num_entries_in_table, table_data_size); - - if (info_entry_ptr == NULL) { - - /* Set the output parameters to physical addresses */ - *lli_table_ptr = sep_shared_area_virt_to_bus(sep, - in_lli_table_ptr); - *num_entries_ptr = num_entries_in_table; - *table_data_size_ptr = table_data_size; - - dev_dbg(&sep->pdev->dev, - "output lli_table_in_ptr is %08lx\n", - (unsigned long)*lli_table_ptr); - - } else { - /* Update the info entry of the previous in table */ - info_entry_ptr->bus_address = - sep_shared_area_virt_to_bus(sep, - in_lli_table_ptr); - info_entry_ptr->block_size = - ((num_entries_in_table) << 24) | - (table_data_size); - } - /* Save the pointer to the info entry of the current tables */ - info_entry_ptr = in_lli_table_ptr + num_entries_in_table - 1; - } - /* Print input tables */ - sep_debug_print_lli_tables(sep, (struct sep_lli_entry *) - sep_shared_area_bus_to_virt(sep, *lli_table_ptr), - *num_entries_ptr, *table_data_size_ptr); - /* The array of the pages */ - kfree(lli_array_ptr); - -update_dcb_counter: - /* Update DCB counter */ - sep->nr_dcb_creat++; - goto end_function; - -end_function_error: - /* Free all the allocated resources */ - kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array); - kfree(lli_array_ptr); - kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array); - -end_function: - return error; - -} -/** - * sep_construct_dma_tables_from_lli - prepare AES/DES mappings - * @sep: pointer to struct sep_device - * @lli_in_array: - * @sep_in_lli_entries: - * @lli_out_array: - * @sep_out_lli_entries - * @block_size - * @lli_table_in_ptr - * @lli_table_out_ptr - * @in_num_entries_ptr - * @out_num_entries_ptr - * @table_data_size_ptr - * - * This function creates the input and output DMA tables for - * symmetric operations (AES/DES) according to the block - * size from LLI arays - * Note that all bus addresses that are passed to the SEP - * are in 32 bit format; the SEP is a 32 bit device - */ -static int sep_construct_dma_tables_from_lli( - struct sep_device *sep, - struct sep_lli_entry *lli_in_array, - u32 sep_in_lli_entries, - struct sep_lli_entry *lli_out_array, - u32 sep_out_lli_entries, - u32 block_size, - dma_addr_t *lli_table_in_ptr, - dma_addr_t *lli_table_out_ptr, - u32 *in_num_entries_ptr, - u32 *out_num_entries_ptr, - u32 *table_data_size_ptr) -{ - /* Points to the area where next lli table can be allocated */ - void *lli_table_alloc_addr = 0; - /* Input lli table */ - struct sep_lli_entry *in_lli_table_ptr = NULL; - /* Output lli table */ - struct sep_lli_entry *out_lli_table_ptr = NULL; - /* Pointer to the info entry of the table - the last entry */ - struct sep_lli_entry *info_in_entry_ptr = NULL; - /* Pointer to the info entry of the table - the last entry */ - struct sep_lli_entry *info_out_entry_ptr = NULL; - /* Points to the first entry to be processed in the lli_in_array */ - u32 current_in_entry = 0; - /* Points to the first entry to be processed in the lli_out_array */ - u32 current_out_entry = 0; - /* Max size of the input table */ - u32 in_table_data_size = 0; - /* Max size of the output table */ - u32 out_table_data_size = 0; - /* Flag te signifies if this is the last tables build */ - u32 last_table_flag = 0; - /* The data size that should be in table */ - u32 table_data_size = 0; - /* Number of etnries in the input table */ - u32 num_entries_in_table = 0; - /* Number of etnries in the output table */ - u32 num_entries_out_table = 0; - - /* Initiate to point after the message area */ - lli_table_alloc_addr = (void *)(sep->shared_addr + - SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + - (sep->num_lli_tables_created * - (sizeof(struct sep_lli_entry) * - SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP))); - - /* Loop till all the entries in in array are not processed */ - while (current_in_entry < sep_in_lli_entries) { - /* Set the new input and output tables */ - in_lli_table_ptr = - (struct sep_lli_entry *)lli_table_alloc_addr; - - lli_table_alloc_addr += sizeof(struct sep_lli_entry) * - SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; - - /* Set the first output tables */ - out_lli_table_ptr = - (struct sep_lli_entry *)lli_table_alloc_addr; - - /* Check if the DMA table area limit was overrun */ - if ((lli_table_alloc_addr + sizeof(struct sep_lli_entry) * - SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP) > - ((void *)sep->shared_addr + - SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + - SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES)) { - - dev_warn(&sep->pdev->dev, "dma table limit overrun\n"); - return -ENOMEM; - } - - /* Update the number of the lli tables created */ - sep->num_lli_tables_created += 2; - - lli_table_alloc_addr += sizeof(struct sep_lli_entry) * - SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP; - - /* Calculate the maximum size of data for input table */ - in_table_data_size = - sep_calculate_lli_table_max_size(sep, - &lli_in_array[current_in_entry], - (sep_in_lli_entries - current_in_entry), - &last_table_flag); - - /* Calculate the maximum size of data for output table */ - out_table_data_size = - sep_calculate_lli_table_max_size(sep, - &lli_out_array[current_out_entry], - (sep_out_lli_entries - current_out_entry), - &last_table_flag); - - dev_dbg(&sep->pdev->dev, - "construct tables from lli in_table_data_size is %x\n", - in_table_data_size); - - dev_dbg(&sep->pdev->dev, - "construct tables from lli out_table_data_size is %x\n", - out_table_data_size); - - table_data_size = in_table_data_size; - - if (!last_table_flag) { - /* - * If this is not the last table, - * then must check where the data is smallest - * and then align it to the block size - */ - if (table_data_size > out_table_data_size) - table_data_size = out_table_data_size; - - /* - * Now calculate the table size so that - * it will be module block size - */ - table_data_size = (table_data_size / block_size) * - block_size; - } - - /* Construct input lli table */ - sep_build_lli_table(sep, &lli_in_array[current_in_entry], - in_lli_table_ptr, - ¤t_in_entry, - &num_entries_in_table, - table_data_size); - - /* Construct output lli table */ - sep_build_lli_table(sep, &lli_out_array[current_out_entry], - out_lli_table_ptr, - ¤t_out_entry, - &num_entries_out_table, - table_data_size); - - /* If info entry is null - this is the first table built */ - if (info_in_entry_ptr == NULL) { - /* Set the output parameters to physical addresses */ - *lli_table_in_ptr = - sep_shared_area_virt_to_bus(sep, in_lli_table_ptr); - - *in_num_entries_ptr = num_entries_in_table; - - *lli_table_out_ptr = - sep_shared_area_virt_to_bus(sep, - out_lli_table_ptr); - - *out_num_entries_ptr = num_entries_out_table; - *table_data_size_ptr = table_data_size; - - dev_dbg(&sep->pdev->dev, - "output lli_table_in_ptr is %08lx\n", - (unsigned long)*lli_table_in_ptr); - dev_dbg(&sep->pdev->dev, - "output lli_table_out_ptr is %08lx\n", - (unsigned long)*lli_table_out_ptr); - } else { - /* Update the info entry of the previous in table */ - info_in_entry_ptr->bus_address = - sep_shared_area_virt_to_bus(sep, - in_lli_table_ptr); - - info_in_entry_ptr->block_size = - ((num_entries_in_table) << 24) | - (table_data_size); - - /* Update the info entry of the previous in table */ - info_out_entry_ptr->bus_address = - sep_shared_area_virt_to_bus(sep, - out_lli_table_ptr); - - info_out_entry_ptr->block_size = - ((num_entries_out_table) << 24) | - (table_data_size); - - dev_dbg(&sep->pdev->dev, - "output lli_table_in_ptr:%08lx %08x\n", - (unsigned long)info_in_entry_ptr->bus_address, - info_in_entry_ptr->block_size); - - dev_dbg(&sep->pdev->dev, - "output lli_table_out_ptr:%08lx %08x\n", - (unsigned long)info_out_entry_ptr->bus_address, - info_out_entry_ptr->block_size); - } - - /* Save the pointer to the info entry of the current tables */ - info_in_entry_ptr = in_lli_table_ptr + - num_entries_in_table - 1; - info_out_entry_ptr = out_lli_table_ptr + - num_entries_out_table - 1; - - dev_dbg(&sep->pdev->dev, - "output num_entries_out_table is %x\n", - (u32)num_entries_out_table); - dev_dbg(&sep->pdev->dev, - "output info_in_entry_ptr is %lx\n", - (unsigned long)info_in_entry_ptr); - dev_dbg(&sep->pdev->dev, - "output info_out_entry_ptr is %lx\n", - (unsigned long)info_out_entry_ptr); - } - - /* Print input tables */ - sep_debug_print_lli_tables(sep, - (struct sep_lli_entry *) - sep_shared_area_bus_to_virt(sep, *lli_table_in_ptr), - *in_num_entries_ptr, - *table_data_size_ptr); - - /* Print output tables */ - sep_debug_print_lli_tables(sep, - (struct sep_lli_entry *) - sep_shared_area_bus_to_virt(sep, *lli_table_out_ptr), - *out_num_entries_ptr, - *table_data_size_ptr); - - return 0; -} - -/** - * sep_prepare_input_output_dma_table - prepare DMA I/O table - * @app_virt_in_addr: - * @app_virt_out_addr: - * @data_size: - * @block_size: - * @lli_table_in_ptr: - * @lli_table_out_ptr: - * @in_num_entries_ptr: - * @out_num_entries_ptr: - * @table_data_size_ptr: - * @is_kva: set for kernel data; used only for kernel crypto module - * - * This function builds input and output DMA tables for synhronic - * symmetric operations (AES, DES, HASH). It also checks that each table - * is of the modular block size - * Note that all bus addresses that are passed to the SEP - * are in 32 bit format; the SEP is a 32 bit device - */ -static int sep_prepare_input_output_dma_table(struct sep_device *sep, - unsigned long app_virt_in_addr, - unsigned long app_virt_out_addr, - u32 data_size, - u32 block_size, - dma_addr_t *lli_table_in_ptr, - dma_addr_t *lli_table_out_ptr, - u32 *in_num_entries_ptr, - u32 *out_num_entries_ptr, - u32 *table_data_size_ptr, - bool is_kva) - -{ - int error = 0; - /* Array of pointers of page */ - struct sep_lli_entry *lli_in_array; - /* Array of pointers of page */ - struct sep_lli_entry *lli_out_array; - - if (data_size == 0) { - /* Prepare empty table for input and output */ - sep_prepare_empty_lli_table(sep, lli_table_in_ptr, - in_num_entries_ptr, table_data_size_ptr); - - sep_prepare_empty_lli_table(sep, lli_table_out_ptr, - out_num_entries_ptr, table_data_size_ptr); - - goto update_dcb_counter; - } - - /* Initialize the pages pointers */ - sep->dma_res_arr[sep->nr_dcb_creat].in_page_array = NULL; - sep->dma_res_arr[sep->nr_dcb_creat].out_page_array = NULL; - - /* Lock the pages of the buffer and translate them to pages */ - if (is_kva == true) { - error = sep_lock_kernel_pages(sep, app_virt_in_addr, - data_size, &lli_in_array, SEP_DRIVER_IN_FLAG); - - if (error) { - dev_warn(&sep->pdev->dev, - "lock kernel for in failed\n"); - goto end_function; - } - - error = sep_lock_kernel_pages(sep, app_virt_out_addr, - data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG); - - if (error) { - dev_warn(&sep->pdev->dev, - "lock kernel for out failed\n"); - goto end_function; - } - } - - else { - error = sep_lock_user_pages(sep, app_virt_in_addr, - data_size, &lli_in_array, SEP_DRIVER_IN_FLAG); - if (error) { - dev_warn(&sep->pdev->dev, - "sep_lock_user_pages for input virtual buffer failed\n"); - goto end_function; - } - - error = sep_lock_user_pages(sep, app_virt_out_addr, - data_size, &lli_out_array, SEP_DRIVER_OUT_FLAG); - - if (error) { - dev_warn(&sep->pdev->dev, - "sep_lock_user_pages for output virtual buffer failed\n"); - goto end_function_free_lli_in; - } - } - - dev_dbg(&sep->pdev->dev, "prep input output dma table sep_in_num_pages is %x\n", - sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages); - dev_dbg(&sep->pdev->dev, "sep_out_num_pages is %x\n", - sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages); - dev_dbg(&sep->pdev->dev, "SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP is %x\n", - SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP); - - /* Call the function that creates table from the lli arrays */ - error = sep_construct_dma_tables_from_lli(sep, lli_in_array, - sep->dma_res_arr[sep->nr_dcb_creat].in_num_pages, - lli_out_array, - sep->dma_res_arr[sep->nr_dcb_creat].out_num_pages, - block_size, lli_table_in_ptr, lli_table_out_ptr, - in_num_entries_ptr, out_num_entries_ptr, table_data_size_ptr); - - if (error) { - dev_warn(&sep->pdev->dev, - "sep_construct_dma_tables_from_lli failed\n"); - goto end_function_with_error; - } - - kfree(lli_out_array); - kfree(lli_in_array); - -update_dcb_counter: - /* Update DCB counter */ - sep->nr_dcb_creat++; - - goto end_function; - -end_function_with_error: - kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_map_array); - kfree(sep->dma_res_arr[sep->nr_dcb_creat].out_page_array); - kfree(lli_out_array); - - -end_function_free_lli_in: - kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_map_array); - kfree(sep->dma_res_arr[sep->nr_dcb_creat].in_page_array); - kfree(lli_in_array); - -end_function: - - return error; - -} - -/** - * sep_prepare_input_output_dma_table_in_dcb - prepare control blocks - * @app_in_address: unsigned long; for data buffer in (user space) - * @app_out_address: unsigned long; for data buffer out (user space) - * @data_in_size: u32; for size of data - * @block_size: u32; for block size - * @tail_block_size: u32; for size of tail block - * @isapplet: bool; to indicate external app - * @is_kva: bool; kernel buffer; only used for kernel crypto module - * - * This function prepares the linked DMA tables and puts the - * address for the linked list of tables inta a DCB (data control - * block) the address of which is known by the SEP hardware - * Note that all bus addresses that are passed to the SEP - * are in 32 bit format; the SEP is a 32 bit device - */ -static int sep_prepare_input_output_dma_table_in_dcb(struct sep_device *sep, - unsigned long app_in_address, - unsigned long app_out_address, - u32 data_in_size, - u32 block_size, - u32 tail_block_size, - bool isapplet, - bool is_kva) -{ - int error = 0; - /* Size of tail */ - u32 tail_size = 0; - /* Address of the created DCB table */ - struct sep_dcblock *dcb_table_ptr = NULL; - /* The physical address of the first input DMA table */ - dma_addr_t in_first_mlli_address = 0; - /* Number of entries in the first input DMA table */ - u32 in_first_num_entries = 0; - /* The physical address of the first output DMA table */ - dma_addr_t out_first_mlli_address = 0; - /* Number of entries in the first output DMA table */ - u32 out_first_num_entries = 0; - /* Data in the first input/output table */ - u32 first_data_size = 0; - - if (sep->nr_dcb_creat == SEP_MAX_NUM_SYNC_DMA_OPS) { - /* No more DCBs to allocate */ - dev_warn(&sep->pdev->dev, "no more DCBs available\n"); - error = -ENOSPC; - goto end_function; - } - - /* Allocate new DCB */ - dcb_table_ptr = (struct sep_dcblock *)(sep->shared_addr + - SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES + - (sep->nr_dcb_creat * sizeof(struct sep_dcblock))); - - /* Set the default values in the DCB */ - dcb_table_ptr->input_mlli_address = 0; - dcb_table_ptr->input_mlli_num_entries = 0; - dcb_table_ptr->input_mlli_data_size = 0; - dcb_table_ptr->output_mlli_address = 0; - dcb_table_ptr->output_mlli_num_entries = 0; - dcb_table_ptr->output_mlli_data_size = 0; - dcb_table_ptr->tail_data_size = 0; - dcb_table_ptr->out_vr_tail_pt = 0; - - if (isapplet == true) { - - /* Check if there is enough data for DMA operation */ - if (data_in_size < SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE) { - if (is_kva == true) { - memcpy(dcb_table_ptr->tail_data, - (void *)app_in_address, data_in_size); - } else { - if (copy_from_user(dcb_table_ptr->tail_data, - (void __user *)app_in_address, - data_in_size)) { - error = -EFAULT; - goto end_function; - } - } - - dcb_table_ptr->tail_data_size = data_in_size; - - /* Set the output user-space address for mem2mem op */ - if (app_out_address) - dcb_table_ptr->out_vr_tail_pt = - (aligned_u64)app_out_address; - - /* - * Update both data length parameters in order to avoid - * second data copy and allow building of empty mlli - * tables - */ - tail_size = 0x0; - data_in_size = 0x0; - - } else { - if (!app_out_address) { - tail_size = data_in_size % block_size; - if (!tail_size) { - if (tail_block_size == block_size) - tail_size = block_size; - } - } else { - tail_size = 0; - } - } - if (tail_size) { - if (is_kva == true) { - memcpy(dcb_table_ptr->tail_data, - (void *)(app_in_address + data_in_size - - tail_size), tail_size); - } else { - /* We have tail data - copy it to DCB */ - if (copy_from_user(dcb_table_ptr->tail_data, - (void *)(app_in_address + - data_in_size - tail_size), tail_size)) { - error = -EFAULT; - goto end_function; - } - } - if (app_out_address) - /* - * Calculate the output address - * according to tail data size - */ - dcb_table_ptr->out_vr_tail_pt = - (aligned_u64)app_out_address + data_in_size - - tail_size; - - /* Save the real tail data size */ - dcb_table_ptr->tail_data_size = tail_size; - /* - * Update the data size without the tail - * data size AKA data for the dma - */ - data_in_size = (data_in_size - tail_size); - } - } - /* Check if we need to build only input table or input/output */ - if (app_out_address) { - /* Prepare input/output tables */ - error = sep_prepare_input_output_dma_table(sep, - app_in_address, - app_out_address, - data_in_size, - block_size, - &in_first_mlli_address, - &out_first_mlli_address, - &in_first_num_entries, - &out_first_num_entries, - &first_data_size, - is_kva); - } else { - /* Prepare input tables */ - error = sep_prepare_input_dma_table(sep, - app_in_address, - data_in_size, - block_size, - &in_first_mlli_address, - &in_first_num_entries, - &first_data_size, - is_kva); - } - - if (error) { - dev_warn(&sep->pdev->dev, "prepare DMA table call failed from prepare DCB call\n"); - goto end_function; - } - - /* Set the DCB values */ - dcb_table_ptr->input_mlli_address = in_first_mlli_address; - dcb_table_ptr->input_mlli_num_entries = in_first_num_entries; - dcb_table_ptr->input_mlli_data_size = first_data_size; - dcb_table_ptr->output_mlli_address = out_first_mlli_address; - dcb_table_ptr->output_mlli_num_entries = out_first_num_entries; - dcb_table_ptr->output_mlli_data_size = first_data_size; - -end_function: - return error; - -} - -/** - * sep_free_dma_tables_and_dcb - free DMA tables and DCBs - * @sep: pointer to struct sep_device - * @isapplet: indicates external application (used for kernel access) - * @is_kva: indicates kernel addresses (only used for kernel crypto) - * - * This function frees the DMA tables and DCB - */ -static int sep_free_dma_tables_and_dcb(struct sep_device *sep, bool isapplet, - bool is_kva) -{ - int i = 0; - int error = 0; - int error_temp = 0; - struct sep_dcblock *dcb_table_ptr; - unsigned long pt_hold; - void *tail_pt; - - if (isapplet == true) { - /* Set pointer to first DCB table */ - dcb_table_ptr = (struct sep_dcblock *) - (sep->shared_addr + - SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES); - - /* Go over each DCB and see if tail pointer must be updated */ - for (i = 0; i < sep->nr_dcb_creat; i++, dcb_table_ptr++) { - if (dcb_table_ptr->out_vr_tail_pt) { - pt_hold = (unsigned long)dcb_table_ptr->out_vr_tail_pt; - tail_pt = (void *)pt_hold; - if (is_kva == true) { - memcpy(tail_pt, - dcb_table_ptr->tail_data, - dcb_table_ptr->tail_data_size); - } else { - error_temp = copy_to_user( - tail_pt, - dcb_table_ptr->tail_data, - dcb_table_ptr->tail_data_size); - } - if (error_temp) { - /* Release the DMA resource */ - error = -EFAULT; - break; - } - } - } - } - /* Free the output pages, if any */ - sep_free_dma_table_data_handler(sep); - - return error; -} - -/** - * sep_get_static_pool_addr_handler - get static pool address - * @sep: pointer to struct sep_device - * - * This function sets the bus and virtual addresses of the static pool - */ -static int sep_get_static_pool_addr_handler(struct sep_device *sep) -{ - u32 *static_pool_addr = NULL; - - static_pool_addr = (u32 *)(sep->shared_addr + - SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES); - - static_pool_addr[0] = SEP_STATIC_POOL_VAL_TOKEN; - static_pool_addr[1] = (u32)sep->shared_bus + - SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES; - - dev_dbg(&sep->pdev->dev, "static pool segment: physical %x\n", - (u32)static_pool_addr[1]); - - return 0; -} - -/** - * sep_end_transaction_handler - end transaction - * @sep: pointer to struct sep_device - * - * This API handles the end transaction request - */ -static int sep_end_transaction_handler(struct sep_device *sep) -{ - /* Clear the data pool pointers Token */ - memset((void *)(sep->shared_addr + - SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES), - 0, sep->num_of_data_allocations*2*sizeof(u32)); - - /* Check that all the DMA resources were freed */ - sep_free_dma_table_data_handler(sep); - - clear_bit(SEP_MMAP_LOCK_BIT, &sep->in_use_flags); - - /* - * We are now through with the transaction. Let's - * allow other processes who have the device open - * to perform transactions - */ - mutex_lock(&sep->sep_mutex); - sep->pid_doing_transaction = 0; - mutex_unlock(&sep->sep_mutex); - /* Raise event for stuck contextes */ - wake_up(&sep->event); - - return 0; -} - -/** - * sep_prepare_dcb_handler - prepare a control block - * @sep: pointer to struct sep_device - * @arg: pointer to user parameters - * - * This function will retrieve the RAR buffer physical addresses, type - * & size corresponding to the RAR handles provided in the buffers vector. - */ -static int sep_prepare_dcb_handler(struct sep_device *sep, unsigned long arg) -{ - int error; - /* Command arguments */ - struct build_dcb_struct command_args; - - /* Get the command arguments */ - if (copy_from_user(&command_args, (void __user *)arg, - sizeof(struct build_dcb_struct))) { - error = -EFAULT; - goto end_function; - } - - dev_dbg(&sep->pdev->dev, "prep dcb handler app_in_address is %08llx\n", - command_args.app_in_address); - dev_dbg(&sep->pdev->dev, "app_out_address is %08llx\n", - command_args.app_out_address); - dev_dbg(&sep->pdev->dev, "data_size is %x\n", - command_args.data_in_size); - dev_dbg(&sep->pdev->dev, "block_size is %x\n", - command_args.block_size); - dev_dbg(&sep->pdev->dev, "tail block_size is %x\n", - command_args.tail_block_size); - - error = sep_prepare_input_output_dma_table_in_dcb(sep, - (unsigned long)command_args.app_in_address, - (unsigned long)command_args.app_out_address, - command_args.data_in_size, command_args.block_size, - command_args.tail_block_size, true, false); - -end_function: - return error; - -} - -/** - * sep_free_dcb_handler - free control block resources - * @sep: pointer to struct sep_device - * - * This function frees the DCB resources and updates the needed - * user-space buffers. - */ -static int sep_free_dcb_handler(struct sep_device *sep) -{ - return sep_free_dma_tables_and_dcb(sep, false, false); -} - -/** - * sep_rar_prepare_output_msg_handler - prepare an output message - * @sep: pointer to struct sep_device - * @arg: pointer to user parameters - * - * This function will retrieve the RAR buffer physical addresses, type - * & size corresponding to the RAR handles provided in the buffers vector. - */ -static int sep_rar_prepare_output_msg_handler(struct sep_device *sep, - unsigned long arg) -{ - int error = 0; - /* Command args */ - struct rar_hndl_to_bus_struct command_args; - /* Bus address */ - dma_addr_t rar_bus = 0; - /* Holds the RAR address in the system memory offset */ - u32 *rar_addr; - - /* Copy the data */ - if (copy_from_user(&command_args, (void __user *)arg, - sizeof(command_args))) { - error = -EFAULT; - goto end_function; - } - - /* Call to translation function only if user handle is not NULL */ - if (command_args.rar_handle) - return -EOPNOTSUPP; - dev_dbg(&sep->pdev->dev, "rar msg; rar_addr_bus = %x\n", (u32)rar_bus); - - /* Set value in the SYSTEM MEMORY offset */ - rar_addr = (u32 *)(sep->shared_addr + - SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES); - - /* Copy the physical address to the System Area for the SEP */ - rar_addr[0] = SEP_RAR_VAL_TOKEN; - rar_addr[1] = rar_bus; - -end_function: - return error; -} - -/** - * sep_ioctl - ioctl api - * @filp: pointer to struct file - * @cmd: command - * @arg: pointer to argument structure - * - * Implement the ioctl methods available on the SEP device. - */ -static long sep_ioctl(struct file *filp, unsigned int cmd, unsigned long arg) -{ - int error = 0; - struct sep_device *sep = filp->private_data; - - /* Make sure we own this device */ - mutex_lock(&sep->sep_mutex); - if ((current->pid != sep->pid_doing_transaction) && - (sep->pid_doing_transaction != 0)) { - dev_dbg(&sep->pdev->dev, "ioctl pid is not owner\n"); - error = -EACCES; - goto end_function; - } - - mutex_unlock(&sep->sep_mutex); - - if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER) - return -ENOTTY; - - /* Lock to prevent the daemon to interfere with operation */ - mutex_lock(&sep->ioctl_mutex); - - switch (cmd) { - case SEP_IOCSENDSEPCOMMAND: - /* Send command to SEP */ - error = sep_send_command_handler(sep); - break; - case SEP_IOCALLOCDATAPOLL: - /* Allocate data pool */ - error = sep_allocate_data_pool_memory_handler(sep, arg); - break; - case SEP_IOCGETSTATICPOOLADDR: - /* Inform the SEP the bus address of the static pool */ - error = sep_get_static_pool_addr_handler(sep); - break; - case SEP_IOCENDTRANSACTION: - error = sep_end_transaction_handler(sep); - break; - case SEP_IOCRARPREPAREMESSAGE: - error = sep_rar_prepare_output_msg_handler(sep, arg); - break; - case SEP_IOCPREPAREDCB: - error = sep_prepare_dcb_handler(sep, arg); - break; - case SEP_IOCFREEDCB: - error = sep_free_dcb_handler(sep); - break; - default: - error = -ENOTTY; - break; - } - -end_function: - mutex_unlock(&sep->ioctl_mutex); - return error; -} - -/** - * sep_singleton_ioctl - ioctl api for singleton interface - * @filp: pointer to struct file - * @cmd: command - * @arg: pointer to argument structure - * - * Implement the additional ioctls for the singleton device - */ -static long sep_singleton_ioctl(struct file *filp, u32 cmd, unsigned long arg) -{ - long error = 0; - struct sep_device *sep = filp->private_data; - - /* Check that the command is for the SEP device */ - if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER) - return -ENOTTY; - - /* Make sure we own this device */ - mutex_lock(&sep->sep_mutex); - if ((current->pid != sep->pid_doing_transaction) && - (sep->pid_doing_transaction != 0)) { - dev_dbg(&sep->pdev->dev, "singleton ioctl pid is not owner\n"); - mutex_unlock(&sep->sep_mutex); - return -EACCES; - } - - mutex_unlock(&sep->sep_mutex); - - switch (cmd) { - case SEP_IOCTLSETCALLERID: - mutex_lock(&sep->ioctl_mutex); - error = sep_set_caller_id_handler(sep, arg); - mutex_unlock(&sep->ioctl_mutex); - break; - default: - error = sep_ioctl(filp, cmd, arg); - break; - } - return error; -} - -/** - * sep_request_daemon_ioctl - ioctl for daemon - * @filp: pointer to struct file - * @cmd: command - * @arg: pointer to argument structure - * - * Called by the request daemon to perform ioctls on the daemon device - */ -static long sep_request_daemon_ioctl(struct file *filp, u32 cmd, - unsigned long arg) -{ - - long error; - struct sep_device *sep = filp->private_data; - - /* Check that the command is for SEP device */ - if (_IOC_TYPE(cmd) != SEP_IOC_MAGIC_NUMBER) - return -ENOTTY; - - /* Only one process can access ioctl at any given time */ - mutex_lock(&sep->ioctl_mutex); - - switch (cmd) { - case SEP_IOCSENDSEPRPLYCOMMAND: - /* Send reply command to SEP */ - error = sep_req_daemon_send_reply_command_handler(sep); - break; - case SEP_IOCENDTRANSACTION: - /* - * End req daemon transaction, do nothing - * will be removed upon update in middleware - * API library - */ - error = 0; - break; - default: - error = -ENOTTY; - } - mutex_unlock(&sep->ioctl_mutex); - return error; -} - -/** - * sep_inthandler - interrupt handler - * @irq: interrupt - * @dev_id: device id - */ -static irqreturn_t sep_inthandler(int irq, void *dev_id) -{ - irqreturn_t int_error = IRQ_HANDLED; - unsigned long lck_flags; - u32 reg_val, reg_val2 = 0; - struct sep_device *sep = dev_id; - - /* Read the IRR register to check if this is SEP interrupt */ - reg_val = sep_read_reg(sep, HW_HOST_IRR_REG_ADDR); - - if (reg_val & (0x1 << 13)) { - /* Lock and update the counter of reply messages */ - spin_lock_irqsave(&sep->snd_rply_lck, lck_flags); - sep->reply_ct++; - spin_unlock_irqrestore(&sep->snd_rply_lck, lck_flags); - - dev_dbg(&sep->pdev->dev, "sep int: send_ct %lx reply_ct %lx\n", - sep->send_ct, sep->reply_ct); - - /* Is this printf or daemon request? */ - reg_val2 = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); - dev_dbg(&sep->pdev->dev, - "SEP Interrupt - reg2 is %08x\n", reg_val2); - - if ((reg_val2 >> 30) & 0x1) { - dev_dbg(&sep->pdev->dev, "int: printf request\n"); - wake_up(&sep->event_request_daemon); - } else if (reg_val2 >> 31) { - dev_dbg(&sep->pdev->dev, "int: daemon request\n"); - wake_up(&sep->event_request_daemon); - } else { - dev_dbg(&sep->pdev->dev, "int: SEP reply\n"); - wake_up(&sep->event); - } - } else { - dev_dbg(&sep->pdev->dev, "int: not SEP interrupt\n"); - int_error = IRQ_NONE; - } - if (int_error == IRQ_HANDLED) - sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, reg_val); - - return int_error; -} - -/** - * sep_reconfig_shared_area - reconfigure shared area - * @sep: pointer to struct sep_device - * - * Reconfig the shared area between HOST and SEP - needed in case - * the DX_CC_Init function was called before OS loading. - */ -static int sep_reconfig_shared_area(struct sep_device *sep) -{ - int ret_val; - - /* use to limit waiting for SEP */ - unsigned long end_time; - - /* Send the new SHARED MESSAGE AREA to the SEP */ - dev_dbg(&sep->pdev->dev, "reconfig shared; sending %08llx to sep\n", - (unsigned long long)sep->shared_bus); - - sep_write_reg(sep, HW_HOST_HOST_SEP_GPR1_REG_ADDR, sep->shared_bus); - - /* Poll for SEP response */ - ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR); - - end_time = jiffies + (WAIT_TIME * HZ); - - while ((time_before(jiffies, end_time)) && (ret_val != 0xffffffff) && - (ret_val != sep->shared_bus)) - ret_val = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR1_REG_ADDR); - - /* Check the return value (register) */ - if (ret_val != sep->shared_bus) { - dev_warn(&sep->pdev->dev, "could not reconfig shared area\n"); - dev_warn(&sep->pdev->dev, "result was %x\n", ret_val); - ret_val = -ENOMEM; - } else - ret_val = 0; - - dev_dbg(&sep->pdev->dev, "reconfig shared area end\n"); - return ret_val; -} - -/* File operation for singleton SEP operations */ -static const struct file_operations singleton_file_operations = { - .owner = THIS_MODULE, - .unlocked_ioctl = sep_singleton_ioctl, - .poll = sep_poll, - .open = sep_singleton_open, - .release = sep_singleton_release, - .mmap = sep_mmap, -}; - -/* File operation for daemon operations */ -static const struct file_operations daemon_file_operations = { - .owner = THIS_MODULE, - .unlocked_ioctl = sep_request_daemon_ioctl, - .poll = sep_request_daemon_poll, - .open = sep_request_daemon_open, - .release = sep_request_daemon_release, - .mmap = sep_request_daemon_mmap, -}; - -/* The files operations structure of the driver */ -static const struct file_operations sep_file_operations = { - .owner = THIS_MODULE, - .unlocked_ioctl = sep_ioctl, - .poll = sep_poll, - .open = sep_open, - .release = sep_release, - .mmap = sep_mmap, -}; - -/** - * sep_register_driver_with_fs - register misc devices - * @sep: pointer to struct sep_device - * - * This function registers the driver with the file system - */ -static int sep_register_driver_with_fs(struct sep_device *sep) -{ - int ret_val; - - sep->miscdev_sep.minor = MISC_DYNAMIC_MINOR; - sep->miscdev_sep.name = SEP_DEV_NAME; - sep->miscdev_sep.fops = &sep_file_operations; - - sep->miscdev_singleton.minor = MISC_DYNAMIC_MINOR; - sep->miscdev_singleton.name = SEP_DEV_SINGLETON; - sep->miscdev_singleton.fops = &singleton_file_operations; - - sep->miscdev_daemon.minor = MISC_DYNAMIC_MINOR; - sep->miscdev_daemon.name = SEP_DEV_DAEMON; - sep->miscdev_daemon.fops = &daemon_file_operations; - - ret_val = misc_register(&sep->miscdev_sep); - if (ret_val) { - dev_warn(&sep->pdev->dev, "misc reg fails for SEP %x\n", - ret_val); - return ret_val; - } - - ret_val = misc_register(&sep->miscdev_singleton); - if (ret_val) { - dev_warn(&sep->pdev->dev, "misc reg fails for sing %x\n", - ret_val); - misc_deregister(&sep->miscdev_sep); - return ret_val; - } - - ret_val = misc_register(&sep->miscdev_daemon); - if (ret_val) { - dev_warn(&sep->pdev->dev, "misc reg fails for dmn %x\n", - ret_val); - misc_deregister(&sep->miscdev_sep); - misc_deregister(&sep->miscdev_singleton); - - return ret_val; - } - return ret_val; -} - - -/** - * sep_probe - probe a matching PCI device - * @pdev: pci_device - * @end: pci_device_id - * - * Attempt to set up and configure a SEP device that has been - * discovered by the PCI layer. - */ -static int __devinit sep_probe(struct pci_dev *pdev, - const struct pci_device_id *ent) -{ - int error = 0; - struct sep_device *sep; - - if (sep_dev != NULL) { - dev_warn(&pdev->dev, "only one SEP supported.\n"); - return -EBUSY; - } - - /* Enable the device */ - error = pci_enable_device(pdev); - if (error) { - dev_warn(&pdev->dev, "error enabling pci device\n"); - goto end_function; - } - - /* Allocate the sep_device structure for this device */ - sep_dev = kzalloc(sizeof(struct sep_device), GFP_ATOMIC); - if (sep_dev == NULL) { - dev_warn(&pdev->dev, - "can't kmalloc the sep_device structure\n"); - error = -ENOMEM; - goto end_function_disable_device; - } - - /* - * We're going to use another variable for actually - * working with the device; this way, if we have - * multiple devices in the future, it would be easier - * to make appropriate changes - */ - sep = sep_dev; - - sep->pdev = pci_dev_get(pdev); - - init_waitqueue_head(&sep->event); - init_waitqueue_head(&sep->event_request_daemon); - spin_lock_init(&sep->snd_rply_lck); - mutex_init(&sep->sep_mutex); - mutex_init(&sep->ioctl_mutex); - - dev_dbg(&sep->pdev->dev, "sep probe: PCI obtained, device being prepared\n"); - dev_dbg(&sep->pdev->dev, "revision is %d\n", sep->pdev->revision); - - /* Set up our register area */ - sep->reg_physical_addr = pci_resource_start(sep->pdev, 0); - if (!sep->reg_physical_addr) { - dev_warn(&sep->pdev->dev, "Error getting register start\n"); - error = -ENODEV; - goto end_function_free_sep_dev; - } - - sep->reg_physical_end = pci_resource_end(sep->pdev, 0); - if (!sep->reg_physical_end) { - dev_warn(&sep->pdev->dev, "Error getting register end\n"); - error = -ENODEV; - goto end_function_free_sep_dev; - } - - sep->reg_addr = ioremap_nocache(sep->reg_physical_addr, - (size_t)(sep->reg_physical_end - sep->reg_physical_addr + 1)); - if (!sep->reg_addr) { - dev_warn(&sep->pdev->dev, "Error getting register virtual\n"); - error = -ENODEV; - goto end_function_free_sep_dev; - } - - dev_dbg(&sep->pdev->dev, - "Register area start %llx end %llx virtual %p\n", - (unsigned long long)sep->reg_physical_addr, - (unsigned long long)sep->reg_physical_end, - sep->reg_addr); - - /* Allocate the shared area */ - sep->shared_size = SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES + - SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES + - SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES + - SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES + - SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES; - - if (sep_map_and_alloc_shared_area(sep)) { - error = -ENOMEM; - /* Allocation failed */ - goto end_function_error; - } - - /* Clear ICR register */ - sep_write_reg(sep, HW_HOST_ICR_REG_ADDR, 0xFFFFFFFF); - - /* Set the IMR register - open only GPR 2 */ - sep_write_reg(sep, HW_HOST_IMR_REG_ADDR, (~(0x1 << 13))); - - /* Read send/receive counters from SEP */ - sep->reply_ct = sep_read_reg(sep, HW_HOST_SEP_HOST_GPR2_REG_ADDR); - sep->reply_ct &= 0x3FFFFFFF; - sep->send_ct = sep->reply_ct; - - /* Get the interrupt line */ - error = request_irq(pdev->irq, sep_inthandler, IRQF_SHARED, - "sep_driver", sep); - - if (error) - goto end_function_deallocate_sep_shared_area; - - /* The new chip requires a shared area reconfigure */ - if (sep->pdev->revision == 4) { /* Only for new chip */ - error = sep_reconfig_shared_area(sep); - if (error) - goto end_function_free_irq; - } - /* Finally magic up the device nodes */ - /* Register driver with the fs */ - error = sep_register_driver_with_fs(sep); - if (error == 0) - /* Success */ - return 0; - -end_function_free_irq: - free_irq(pdev->irq, sep); - -end_function_deallocate_sep_shared_area: - /* De-allocate shared area */ - sep_unmap_and_free_shared_area(sep); - -end_function_error: - iounmap(sep->reg_addr); - -end_function_free_sep_dev: - pci_dev_put(sep_dev->pdev); - kfree(sep_dev); - sep_dev = NULL; - -end_function_disable_device: - pci_disable_device(pdev); - -end_function: - return error; -} - -static void sep_remove(struct pci_dev *pdev) -{ - struct sep_device *sep = sep_dev; - - /* Unregister from fs */ - misc_deregister(&sep->miscdev_sep); - misc_deregister(&sep->miscdev_singleton); - misc_deregister(&sep->miscdev_daemon); - - /* Free the irq */ - free_irq(sep->pdev->irq, sep); - - /* Free the shared area */ - sep_unmap_and_free_shared_area(sep_dev); - iounmap((void *) sep_dev->reg_addr); -} - -static DEFINE_PCI_DEVICE_TABLE(sep_pci_id_tbl) = { - {PCI_DEVICE(PCI_VENDOR_ID_INTEL, MFLD_PCI_DEVICE_ID)}, - {0} -}; - -MODULE_DEVICE_TABLE(pci, sep_pci_id_tbl); - -/* Field for registering driver to PCI device */ -static struct pci_driver sep_pci_driver = { - .name = "sep_sec_driver", - .id_table = sep_pci_id_tbl, - .probe = sep_probe, - .remove = sep_remove -}; - - -/** - * sep_init - init function - * - * Module load time. Register the PCI device driver. - */ -static int __init sep_init(void) -{ - return pci_register_driver(&sep_pci_driver); -} - - -/** - * sep_exit - called to unload driver - * - * Drop the misc devices then remove and unmap the various resources - * that are not released by the driver remove method. - */ -static void __exit sep_exit(void) -{ - pci_unregister_driver(&sep_pci_driver); -} - - -module_init(sep_init); -module_exit(sep_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/sep/sep_driver_api.h b/drivers/staging/sep/sep_driver_api.h deleted file mode 100644 index c3aacfc..0000000 --- a/drivers/staging/sep/sep_driver_api.h +++ /dev/null @@ -1,215 +0,0 @@ -/* - * - * sep_driver_api.h - Security Processor Driver api definitions - * - * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. - * Contributions(c) 2009,2010 Discretix. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * CONTACTS: - * - * Mark Allyn mark.a.allyn@intel.com - * Jayant Mangalampalli jayant.mangalampalli@intel.com - * - * CHANGES: - * - * 2010.09.14 Upgrade to Medfield - * - */ - -#ifndef __SEP_DRIVER_API_H__ -#define __SEP_DRIVER_API_H__ - -/* Type of request from device */ -#define SEP_DRIVER_SRC_REPLY 1 -#define SEP_DRIVER_SRC_REQ 2 -#define SEP_DRIVER_SRC_PRINTF 3 - - -/*------------------------------------------- - TYPEDEFS -----------------------------------------------*/ - -struct alloc_struct { - /* offset from start of shared pool area */ - u32 offset; - /* number of bytes to allocate */ - u32 num_bytes; -}; - -/* command struct for getting caller id value and address */ -struct caller_id_struct { - /* pid of the process */ - u32 pid; - /* virtual address of the caller id hash */ - aligned_u64 callerIdAddress; - /* caller id hash size in bytes */ - u32 callerIdSizeInBytes; -}; - -/* - structure that represents DCB -*/ -struct sep_dcblock { - /* physical address of the first input mlli */ - u32 input_mlli_address; - /* num of entries in the first input mlli */ - u32 input_mlli_num_entries; - /* size of data in the first input mlli */ - u32 input_mlli_data_size; - /* physical address of the first output mlli */ - u32 output_mlli_address; - /* num of entries in the first output mlli */ - u32 output_mlli_num_entries; - /* size of data in the first output mlli */ - u32 output_mlli_data_size; - /* pointer to the output virtual tail */ - aligned_u64 out_vr_tail_pt; - /* size of tail data */ - u32 tail_data_size; - /* input tail data array */ - u8 tail_data[68]; -}; - -struct sep_caller_id_entry { - int pid; - unsigned char callerIdHash[SEP_CALLER_ID_HASH_SIZE_IN_BYTES]; -}; - -/* - command structure for building dcb block (currently for ext app only -*/ -struct build_dcb_struct { - /* address value of the data in */ - aligned_u64 app_in_address; - /* size of data in */ - u32 data_in_size; - /* address of the data out */ - aligned_u64 app_out_address; - /* the size of the block of the operation - if needed, - every table will be modulo this parameter */ - u32 block_size; - /* the size of the block of the operation - if needed, - every table will be modulo this parameter */ - u32 tail_block_size; -}; - -/** - * @struct sep_dma_map - * - * Structure that contains all information needed for mapping the user pages - * or kernel buffers for dma operations - * - * - */ -struct sep_dma_map { - /* mapped dma address */ - dma_addr_t dma_addr; - /* size of the mapped data */ - size_t size; -}; - -struct sep_dma_resource { - /* array of pointers to the pages that represent - input data for the synchronic DMA action */ - struct page **in_page_array; - - /* array of pointers to the pages that represent out - data for the synchronic DMA action */ - struct page **out_page_array; - - /* number of pages in the sep_in_page_array */ - u32 in_num_pages; - - /* number of pages in the sep_out_page_array */ - u32 out_num_pages; - - /* map array of the input data */ - struct sep_dma_map *in_map_array; - - /* map array of the output data */ - struct sep_dma_map *out_map_array; - - /* number of entries of the input mapp array */ - u32 in_map_num_entries; - - /* number of entries of the output mapp array */ - u32 out_map_num_entries; -}; - - -/* command struct for translating rar handle to bus address - and setting it at predefined location */ -struct rar_hndl_to_bus_struct { - - /* rar handle */ - aligned_u64 rar_handle; -}; - -/* - structure that represent one entry in the DMA LLI table -*/ -struct sep_lli_entry { - /* physical address */ - u32 bus_address; - - /* block size */ - u32 block_size; -}; - -/*---------------------------------------------------------------- - IOCTL command defines - -----------------------------------------------------------------*/ - -/* magic number 1 of the sep IOCTL command */ -#define SEP_IOC_MAGIC_NUMBER 's' - -/* sends interrupt to sep that message is ready */ -#define SEP_IOCSENDSEPCOMMAND \ - _IO(SEP_IOC_MAGIC_NUMBER, 0) - -/* sends interrupt to sep that message is ready */ -#define SEP_IOCSENDSEPRPLYCOMMAND \ - _IO(SEP_IOC_MAGIC_NUMBER, 1) - -/* allocate memory in data pool */ -#define SEP_IOCALLOCDATAPOLL \ - _IOW(SEP_IOC_MAGIC_NUMBER, 2, struct alloc_struct) - -/* free dynamic data aalocated during table creation */ -#define SEP_IOCFREEDMATABLEDATA \ - _IO(SEP_IOC_MAGIC_NUMBER, 7) - -/* get the static pool area addersses (physical and virtual) */ -#define SEP_IOCGETSTATICPOOLADDR \ - _IO(SEP_IOC_MAGIC_NUMBER, 8) - -/* end transaction command */ -#define SEP_IOCENDTRANSACTION \ - _IO(SEP_IOC_MAGIC_NUMBER, 15) - -#define SEP_IOCRARPREPAREMESSAGE \ - _IOW(SEP_IOC_MAGIC_NUMBER, 20, struct rar_hndl_to_bus_struct) - -#define SEP_IOCTLSETCALLERID \ - _IOW(SEP_IOC_MAGIC_NUMBER, 34, struct caller_id_struct) - -#define SEP_IOCPREPAREDCB \ - _IOW(SEP_IOC_MAGIC_NUMBER, 35, struct build_dcb_struct) - -#define SEP_IOCFREEDCB \ - _IO(SEP_IOC_MAGIC_NUMBER, 36) - -#endif diff --git a/drivers/staging/sep/sep_driver_config.h b/drivers/staging/sep/sep_driver_config.h deleted file mode 100644 index 1033425..0000000 --- a/drivers/staging/sep/sep_driver_config.h +++ /dev/null @@ -1,243 +0,0 @@ -/* - * - * sep_driver_config.h - Security Processor Driver configuration - * - * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. - * Contributions(c) 2009,2010 Discretix. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * CONTACTS: - * - * Mark Allyn mark.a.allyn@intel.com - * Jayant Mangalampalli jayant.mangalampalli@intel.com - * - * CHANGES: - * - * 2010.06.26 Upgrade to Medfield - * - */ - -#ifndef __SEP_DRIVER_CONFIG_H__ -#define __SEP_DRIVER_CONFIG_H__ - - -/*-------------------------------------- - DRIVER CONFIGURATION FLAGS - -------------------------------------*/ - -/* if flag is on , then the driver is running in polling and - not interrupt mode */ -#define SEP_DRIVER_POLLING_MODE 0 - -/* flag which defines if the shared area address should be - reconfiged (send to SEP anew) during init of the driver */ -#define SEP_DRIVER_RECONFIG_MESSAGE_AREA 0 - -/* the mode for running on the ARM1172 Evaluation platform (flag is 1) */ -#define SEP_DRIVER_ARM_DEBUG_MODE 0 - -/*------------------------------------------- - INTERNAL DATA CONFIGURATION - -------------------------------------------*/ - -/* flag for the input array */ -#define SEP_DRIVER_IN_FLAG 0 - -/* flag for output array */ -#define SEP_DRIVER_OUT_FLAG 1 - -/* maximum number of entries in one LLI tables */ -#define SEP_DRIVER_ENTRIES_PER_TABLE_IN_SEP 31 - -/* minimum data size of the MLLI table */ -#define SEP_DRIVER_MIN_DATA_SIZE_PER_TABLE 16 - -/* flag that signifies tah the lock is -currently held by the process (struct file) */ -#define SEP_DRIVER_OWN_LOCK_FLAG 1 - -/* flag that signifies tah the lock is currently NOT -held by the process (struct file) */ -#define SEP_DRIVER_DISOWN_LOCK_FLAG 0 - -/* indicates whether driver has mapped/unmapped shared area */ -#define SEP_REQUEST_DAEMON_MAPPED 1 -#define SEP_REQUEST_DAEMON_UNMAPPED 0 - -#define SEP_DEV_NAME "sep_sec_driver" -#define SEP_DEV_SINGLETON "sep_sec_singleton_driver" -#define SEP_DEV_DAEMON "sep_req_daemon_driver" - -/*-------------------------------------------------------- - SHARED AREA memory total size is 36K - it is divided is following: - - SHARED_MESSAGE_AREA 8K } - } - STATIC_POOL_AREA 4K } MAPPED AREA ( 24 K) - } - DATA_POOL_AREA 12K } - - SYNCHRONIC_DMA_TABLES_AREA 5K - - placeholder until drver changes - FLOW_DMA_TABLES_AREA 4K - - SYSTEM_MEMORY_AREA 3k - - SYSTEM_MEMORY total size is 3k - it is divided as following: - - TIME_MEMORY_AREA 8B ------------------------------------------------------------*/ - -#define SEP_DEV_NAME "sep_sec_driver" -#define SEP_DEV_SINGLETON "sep_sec_singleton_driver" -#define SEP_DEV_DAEMON "sep_req_daemon_driver" - - -/* - the maximum length of the message - the rest of the message shared - area will be dedicated to the dma lli tables -*/ -#define SEP_DRIVER_MAX_MESSAGE_SIZE_IN_BYTES (8 * 1024) - -/* the size of the message shared area in pages */ -#define SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES (8 * 1024) - -/* the size of the data pool static area in pages */ -#define SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES (4 * 1024) - -/* the size of the data pool shared area size in pages */ -#define SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES (16 * 1024) - -/* the size of the message shared area in pages */ -#define SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES (1024 * 5) - -/* Placeholder until driver changes */ -#define SEP_DRIVER_FLOW_DMA_TABLES_AREA_SIZE_IN_BYTES (1024 * 4) - -/* system data (time, caller id etc') pool */ -#define SEP_DRIVER_SYSTEM_DATA_MEMORY_SIZE_IN_BYTES (1024 * 3) - -/* the size in bytes of the time memory */ -#define SEP_DRIVER_TIME_MEMORY_SIZE_IN_BYTES 8 - -/* the size in bytes of the RAR parameters memory */ -#define SEP_DRIVER_SYSTEM_RAR_MEMORY_SIZE_IN_BYTES 8 - -/* area size that is mapped - we map the MESSAGE AREA, STATIC POOL and - DATA POOL areas. area must be module 4k */ -#define SEP_DRIVER_MMMAP_AREA_SIZE (1024 * 28) - -/*----------------------------------------------- - offsets of the areas starting from the shared area start address -*/ - -/* message area offset */ -#define SEP_DRIVER_MESSAGE_AREA_OFFSET_IN_BYTES 0 - -/* static pool area offset */ -#define SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES \ - (SEP_DRIVER_MESSAGE_SHARED_AREA_SIZE_IN_BYTES) - -/* data pool area offset */ -#define SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES \ - (SEP_DRIVER_STATIC_AREA_OFFSET_IN_BYTES + \ - SEP_DRIVER_STATIC_AREA_SIZE_IN_BYTES) - -/* synhronic dma tables area offset */ -#define SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES \ - (SEP_DRIVER_DATA_POOL_AREA_OFFSET_IN_BYTES + \ - SEP_DRIVER_DATA_POOL_SHARED_AREA_SIZE_IN_BYTES) - -/* system memory offset in bytes */ -#define SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES \ - (SYNCHRONIC_DMA_TABLES_AREA_OFFSET_BYTES + \ - SYNCHRONIC_DMA_TABLES_AREA_SIZE_BYTES) - -/* offset of the time area */ -#define SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES \ - (SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES) - -/* offset of the RAR area */ -#define SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES \ - (SEP_DRIVER_SYSTEM_TIME_MEMORY_OFFSET_IN_BYTES + \ - SEP_DRIVER_TIME_MEMORY_SIZE_IN_BYTES) - -/* offset of the caller id area */ -#define SEP_CALLER_ID_OFFSET_BYTES \ - (SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES + \ - SEP_DRIVER_SYSTEM_RAR_MEMORY_SIZE_IN_BYTES) - -/* offset of the DCB area */ -#define SEP_DRIVER_SYSTEM_DCB_MEMORY_OFFSET_IN_BYTES \ - (SEP_DRIVER_SYSTEM_DATA_MEMORY_OFFSET_IN_BYTES + \ - 0x400) - -/* offset of the ext cache area */ -#define SEP_DRIVER_SYSTEM_EXT_CACHE_ADDR_OFFSET_IN_BYTES \ - SEP_DRIVER_SYSTEM_RAR_MEMORY_OFFSET_IN_BYTES - -/* offset of the allocation data pointer area */ -#define SEP_DRIVER_DATA_POOL_ALLOCATION_OFFSET_IN_BYTES \ - (SEP_CALLER_ID_OFFSET_BYTES + \ - SEP_CALLER_ID_HASH_SIZE_IN_BYTES) - -/* the token that defines the start of time address */ -#define SEP_TIME_VAL_TOKEN 0x12345678 - -#define FAKE_RAR_SIZE (1024*1024) /* used only for mfld */ -/* DEBUG LEVEL MASKS */ - -/* size of the caller id hash (sha2) */ -#define SEP_CALLER_ID_HASH_SIZE_IN_BYTES 32 - -/* size of the caller id hash (sha2) in 32 bit words */ -#define SEP_CALLER_ID_HASH_SIZE_IN_WORDS 8 - -/* maximum number of entries in the caller id table */ -#define SEP_CALLER_ID_TABLE_NUM_ENTRIES 20 - -/* maximum number of symetric operation (that require DMA resource) - per one message */ -#define SEP_MAX_NUM_SYNC_DMA_OPS 16 - -/* the token that defines the start of time address */ -#define SEP_RAR_VAL_TOKEN 0xABABABAB - -/* ioctl error that should be returned when trying - to realloc the cache/resident second time */ -#define SEP_ALREADY_INITIALIZED_ERR 12 - -/* bit that locks access to the shared area */ -#define SEP_MMAP_LOCK_BIT 0 - -/* bit that lock access to the poll - after send_command */ -#define SEP_SEND_MSG_LOCK_BIT 1 - -/* the token that defines the static pool address address */ -#define SEP_STATIC_POOL_VAL_TOKEN 0xABBAABBA - -/* the token that defines the data pool pointers address */ -#define SEP_DATA_POOL_POINTERS_VAL_TOKEN 0xEDDEEDDE - -/* the token that defines the data pool pointers address */ -#define SEP_EXT_CACHE_ADDR_VAL_TOKEN 0xBABABABA - -/* Time limit for SEP to finish */ -#define WAIT_TIME 10 - -#endif /* SEP DRIVER CONFIG */ diff --git a/drivers/staging/sep/sep_driver_hw_defs.h b/drivers/staging/sep/sep_driver_hw_defs.h deleted file mode 100644 index 300f909..0000000 --- a/drivers/staging/sep/sep_driver_hw_defs.h +++ /dev/null @@ -1,233 +0,0 @@ -/* - * - * sep_driver_hw_defs.h - Security Processor Driver hardware definitions - * - * Copyright(c) 2009,2010 Intel Corporation. All rights reserved. - * Contributions(c) 2009,2010 Discretix. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the Free - * Software Foundation; version 2 of the License. - * - * This program is distributed in the hope that it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for - * more details. - * - * You should have received a copy of the GNU General Public License along with - * this program; if not, write to the Free Software Foundation, Inc., 59 - * Temple Place - Suite 330, Boston, MA 02111-1307, USA. - * - * CONTACTS: - * - * Mark Allyn mark.a.allyn@intel.com - * Jayant Mangalampalli jayant.mangalampalli@intel.com - * - * CHANGES: - * - * 2010.09.20 Upgrade to Medfield - * - */ - -#ifndef SEP_DRIVER_HW_DEFS__H -#define SEP_DRIVER_HW_DEFS__H - -/* PCI ID's */ -#define MFLD_PCI_DEVICE_ID 0x0826 - -/*----------------------- */ -/* HW Registers Defines. */ -/* */ -/*---------------------- -*/ - - -/* cf registers */ -#define HW_R0B_ADDR_0_REG_ADDR 0x0000UL -#define HW_R0B_ADDR_1_REG_ADDR 0x0004UL -#define HW_R0B_ADDR_2_REG_ADDR 0x0008UL -#define HW_R0B_ADDR_3_REG_ADDR 0x000cUL -#define HW_R0B_ADDR_4_REG_ADDR 0x0010UL -#define HW_R0B_ADDR_5_REG_ADDR 0x0014UL -#define HW_R0B_ADDR_6_REG_ADDR 0x0018UL -#define HW_R0B_ADDR_7_REG_ADDR 0x001cUL -#define HW_R0B_ADDR_8_REG_ADDR 0x0020UL -#define HW_R2B_ADDR_0_REG_ADDR 0x0080UL -#define HW_R2B_ADDR_1_REG_ADDR 0x0084UL -#define HW_R2B_ADDR_2_REG_ADDR 0x0088UL -#define HW_R2B_ADDR_3_REG_ADDR 0x008cUL -#define HW_R2B_ADDR_4_REG_ADDR 0x0090UL -#define HW_R2B_ADDR_5_REG_ADDR 0x0094UL -#define HW_R2B_ADDR_6_REG_ADDR 0x0098UL -#define HW_R2B_ADDR_7_REG_ADDR 0x009cUL -#define HW_R2B_ADDR_8_REG_ADDR 0x00a0UL -#define HW_R3B_REG_ADDR 0x00C0UL -#define HW_R4B_REG_ADDR 0x0100UL -#define HW_CSA_ADDR_0_REG_ADDR 0x0140UL -#define HW_CSA_ADDR_1_REG_ADDR 0x0144UL -#define HW_CSA_ADDR_2_REG_ADDR 0x0148UL -#define HW_CSA_ADDR_3_REG_ADDR 0x014cUL -#define HW_CSA_ADDR_4_REG_ADDR 0x0150UL -#define HW_CSA_ADDR_5_REG_ADDR 0x0154UL -#define HW_CSA_ADDR_6_REG_ADDR 0x0158UL -#define HW_CSA_ADDR_7_REG_ADDR 0x015cUL -#define HW_CSA_ADDR_8_REG_ADDR 0x0160UL -#define HW_CSA_REG_ADDR 0x0140UL -#define HW_SINB_REG_ADDR 0x0180UL -#define HW_SOUTB_REG_ADDR 0x0184UL -#define HW_PKI_CONTROL_REG_ADDR 0x01C0UL -#define HW_PKI_STATUS_REG_ADDR 0x01C4UL -#define HW_PKI_BUSY_REG_ADDR 0x01C8UL -#define HW_PKI_A_1025_REG_ADDR 0x01CCUL -#define HW_PKI_SDMA_CTL_REG_ADDR 0x01D0UL -#define HW_PKI_SDMA_OFFSET_REG_ADDR 0x01D4UL -#define HW_PKI_SDMA_POINTERS_REG_ADDR 0x01D8UL -#define HW_PKI_SDMA_DLENG_REG_ADDR 0x01DCUL -#define HW_PKI_SDMA_EXP_POINTERS_REG_ADDR 0x01E0UL -#define HW_PKI_SDMA_RES_POINTERS_REG_ADDR 0x01E4UL -#define HW_PKI_CLR_REG_ADDR 0x01E8UL -#define HW_PKI_SDMA_BUSY_REG_ADDR 0x01E8UL -#define HW_PKI_SDMA_FIRST_EXP_N_REG_ADDR 0x01ECUL -#define HW_PKI_SDMA_MUL_BY1_REG_ADDR 0x01F0UL -#define HW_PKI_SDMA_RMUL_SEL_REG_ADDR 0x01F4UL -#define HW_DES_KEY_0_REG_ADDR 0x0208UL -#define HW_DES_KEY_1_REG_ADDR 0x020CUL -#define HW_DES_KEY_2_REG_ADDR 0x0210UL -#define HW_DES_KEY_3_REG_ADDR 0x0214UL -#define HW_DES_KEY_4_REG_ADDR 0x0218UL -#define HW_DES_KEY_5_REG_ADDR 0x021CUL -#define HW_DES_CONTROL_0_REG_ADDR 0x0220UL -#define HW_DES_CONTROL_1_REG_ADDR 0x0224UL -#define HW_DES_IV_0_REG_ADDR 0x0228UL -#define HW_DES_IV_1_REG_ADDR 0x022CUL -#define HW_AES_KEY_0_ADDR_0_REG_ADDR 0x0400UL -#define HW_AES_KEY_0_ADDR_1_REG_ADDR 0x0404UL -#define HW_AES_KEY_0_ADDR_2_REG_ADDR 0x0408UL -#define HW_AES_KEY_0_ADDR_3_REG_ADDR 0x040cUL -#define HW_AES_KEY_0_ADDR_4_REG_ADDR 0x0410UL -#define HW_AES_KEY_0_ADDR_5_REG_ADDR 0x0414UL -#define HW_AES_KEY_0_ADDR_6_REG_ADDR 0x0418UL -#define HW_AES_KEY_0_ADDR_7_REG_ADDR 0x041cUL -#define HW_AES_KEY_0_REG_ADDR 0x0400UL -#define HW_AES_IV_0_ADDR_0_REG_ADDR 0x0440UL -#define HW_AES_IV_0_ADDR_1_REG_ADDR 0x0444UL -#define HW_AES_IV_0_ADDR_2_REG_ADDR 0x0448UL -#define HW_AES_IV_0_ADDR_3_REG_ADDR 0x044cUL -#define HW_AES_IV_0_REG_ADDR 0x0440UL -#define HW_AES_CTR1_ADDR_0_REG_ADDR 0x0460UL -#define HW_AES_CTR1_ADDR_1_REG_ADDR 0x0464UL -#define HW_AES_CTR1_ADDR_2_REG_ADDR 0x0468UL -#define HW_AES_CTR1_ADDR_3_REG_ADDR 0x046cUL -#define HW_AES_CTR1_REG_ADDR 0x0460UL -#define HW_AES_SK_REG_ADDR 0x0478UL -#define HW_AES_MAC_OK_REG_ADDR 0x0480UL -#define HW_AES_PREV_IV_0_ADDR_0_REG_ADDR 0x0490UL -#define HW_AES_PREV_IV_0_ADDR_1_REG_ADDR 0x0494UL -#define HW_AES_PREV_IV_0_ADDR_2_REG_ADDR 0x0498UL -#define HW_AES_PREV_IV_0_ADDR_3_REG_ADDR 0x049cUL -#define HW_AES_PREV_IV_0_REG_ADDR 0x0490UL -#define HW_AES_CONTROL_REG_ADDR 0x04C0UL -#define HW_HASH_H0_REG_ADDR 0x0640UL -#define HW_HASH_H1_REG_ADDR 0x0644UL -#define HW_HASH_H2_REG_ADDR 0x0648UL -#define HW_HASH_H3_REG_ADDR 0x064CUL -#define HW_HASH_H4_REG_ADDR 0x0650UL -#define HW_HASH_H5_REG_ADDR 0x0654UL -#define HW_HASH_H6_REG_ADDR 0x0658UL -#define HW_HASH_H7_REG_ADDR 0x065CUL -#define HW_HASH_H8_REG_ADDR 0x0660UL -#define HW_HASH_H9_REG_ADDR 0x0664UL -#define HW_HASH_H10_REG_ADDR 0x0668UL -#define HW_HASH_H11_REG_ADDR 0x066CUL -#define HW_HASH_H12_REG_ADDR 0x0670UL -#define HW_HASH_H13_REG_ADDR 0x0674UL -#define HW_HASH_H14_REG_ADDR 0x0678UL -#define HW_HASH_H15_REG_ADDR 0x067CUL -#define HW_HASH_CONTROL_REG_ADDR 0x07C0UL -#define HW_HASH_PAD_EN_REG_ADDR 0x07C4UL -#define HW_HASH_PAD_CFG_REG_ADDR 0x07C8UL -#define HW_HASH_CUR_LEN_0_REG_ADDR 0x07CCUL -#define HW_HASH_CUR_LEN_1_REG_ADDR 0x07D0UL -#define HW_HASH_CUR_LEN_2_REG_ADDR 0x07D4UL -#define HW_HASH_CUR_LEN_3_REG_ADDR 0x07D8UL -#define HW_HASH_PARAM_REG_ADDR 0x07DCUL -#define HW_HASH_INT_BUSY_REG_ADDR 0x07E0UL -#define HW_HASH_SW_RESET_REG_ADDR 0x07E4UL -#define HW_HASH_ENDIANESS_REG_ADDR 0x07E8UL -#define HW_HASH_DATA_REG_ADDR 0x07ECUL -#define HW_DRNG_CONTROL_REG_ADDR 0x0800UL -#define HW_DRNG_VALID_REG_ADDR 0x0804UL -#define HW_DRNG_DATA_REG_ADDR 0x0808UL -#define HW_RND_SRC_EN_REG_ADDR 0x080CUL -#define HW_AES_CLK_ENABLE_REG_ADDR 0x0810UL -#define HW_DES_CLK_ENABLE_REG_ADDR 0x0814UL -#define HW_HASH_CLK_ENABLE_REG_ADDR 0x0818UL -#define HW_PKI_CLK_ENABLE_REG_ADDR 0x081CUL -#define HW_CLK_STATUS_REG_ADDR 0x0824UL -#define HW_CLK_ENABLE_REG_ADDR 0x0828UL -#define HW_DRNG_SAMPLE_REG_ADDR 0x0850UL -#define HW_RND_SRC_CTL_REG_ADDR 0x0858UL -#define HW_CRYPTO_CTL_REG_ADDR 0x0900UL -#define HW_CRYPTO_STATUS_REG_ADDR 0x090CUL -#define HW_CRYPTO_BUSY_REG_ADDR 0x0910UL -#define HW_AES_BUSY_REG_ADDR 0x0914UL -#define HW_DES_BUSY_REG_ADDR 0x0918UL -#define HW_HASH_BUSY_REG_ADDR 0x091CUL -#define HW_CONTENT_REG_ADDR 0x0924UL -#define HW_VERSION_REG_ADDR 0x0928UL -#define HW_CONTEXT_ID_REG_ADDR 0x0930UL -#define HW_DIN_BUFFER_REG_ADDR 0x0C00UL -#define HW_DIN_MEM_DMA_BUSY_REG_ADDR 0x0c20UL -#define HW_SRC_LLI_MEM_ADDR_REG_ADDR 0x0c24UL -#define HW_SRC_LLI_WORD0_REG_ADDR 0x0C28UL -#define HW_SRC_LLI_WORD1_REG_ADDR 0x0C2CUL -#define HW_SRAM_SRC_ADDR_REG_ADDR 0x0c30UL -#define HW_DIN_SRAM_BYTES_LEN_REG_ADDR 0x0c34UL -#define HW_DIN_SRAM_DMA_BUSY_REG_ADDR 0x0C38UL -#define HW_WRITE_ALIGN_REG_ADDR 0x0C3CUL -#define HW_OLD_DATA_REG_ADDR 0x0C48UL -#define HW_WRITE_ALIGN_LAST_REG_ADDR 0x0C4CUL -#define HW_DOUT_BUFFER_REG_ADDR 0x0C00UL -#define HW_DST_LLI_WORD0_REG_ADDR 0x0D28UL -#define HW_DST_LLI_WORD1_REG_ADDR 0x0D2CUL -#define HW_DST_LLI_MEM_ADDR_REG_ADDR 0x0D24UL -#define HW_DOUT_MEM_DMA_BUSY_REG_ADDR 0x0D20UL -#define HW_SRAM_DEST_ADDR_REG_ADDR 0x0D30UL -#define HW_DOUT_SRAM_BYTES_LEN_REG_ADDR 0x0D34UL -#define HW_DOUT_SRAM_DMA_BUSY_REG_ADDR 0x0D38UL -#define HW_READ_ALIGN_REG_ADDR 0x0D3CUL -#define HW_READ_LAST_DATA_REG_ADDR 0x0D44UL -#define HW_RC4_THRU_CPU_REG_ADDR 0x0D4CUL -#define HW_AHB_SINGLE_REG_ADDR 0x0E00UL -#define HW_SRAM_DATA_REG_ADDR 0x0F00UL -#define HW_SRAM_ADDR_REG_ADDR 0x0F04UL -#define HW_SRAM_DATA_READY_REG_ADDR 0x0F08UL -#define HW_HOST_IRR_REG_ADDR 0x0A00UL -#define HW_HOST_IMR_REG_ADDR 0x0A04UL -#define HW_HOST_ICR_REG_ADDR 0x0A08UL -#define HW_HOST_SEP_SRAM_THRESHOLD_REG_ADDR 0x0A10UL -#define HW_HOST_SEP_BUSY_REG_ADDR 0x0A14UL -#define HW_HOST_SEP_LCS_REG_ADDR 0x0A18UL -#define HW_HOST_CC_SW_RST_REG_ADDR 0x0A40UL -#define HW_HOST_SEP_SW_RST_REG_ADDR 0x0A44UL -#define HW_HOST_FLOW_DMA_SW_INT0_REG_ADDR 0x0A80UL -#define HW_HOST_FLOW_DMA_SW_INT1_REG_ADDR 0x0A84UL -#define HW_HOST_FLOW_DMA_SW_INT2_REG_ADDR 0x0A88UL -#define HW_HOST_FLOW_DMA_SW_INT3_REG_ADDR 0x0A8cUL -#define HW_HOST_FLOW_DMA_SW_INT4_REG_ADDR 0x0A90UL -#define HW_HOST_FLOW_DMA_SW_INT5_REG_ADDR 0x0A94UL -#define HW_HOST_FLOW_DMA_SW_INT6_REG_ADDR 0x0A98UL -#define HW_HOST_FLOW_DMA_SW_INT7_REG_ADDR 0x0A9cUL -#define HW_HOST_SEP_HOST_GPR0_REG_ADDR 0x0B00UL -#define HW_HOST_SEP_HOST_GPR1_REG_ADDR 0x0B04UL -#define HW_HOST_SEP_HOST_GPR2_REG_ADDR 0x0B08UL -#define HW_HOST_SEP_HOST_GPR3_REG_ADDR 0x0B0CUL -#define HW_HOST_HOST_SEP_GPR0_REG_ADDR 0x0B80UL -#define HW_HOST_HOST_SEP_GPR1_REG_ADDR 0x0B84UL -#define HW_HOST_HOST_SEP_GPR2_REG_ADDR 0x0B88UL -#define HW_HOST_HOST_SEP_GPR3_REG_ADDR 0x0B8CUL -#define HW_HOST_HOST_ENDIAN_REG_ADDR 0x0B90UL -#define HW_HOST_HOST_COMM_CLK_EN_REG_ADDR 0x0B94UL -#define HW_CLR_SRAM_BUSY_REG_REG_ADDR 0x0F0CUL -#define HW_CC_SRAM_BASE_ADDRESS 0x5800UL - -#endif /* ifndef HW_DEFS */ -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/