Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760829Ab1D2SOA (ORCPT ); Fri, 29 Apr 2011 14:14:00 -0400 Received: from cantor.suse.de ([195.135.220.2]:53622 "EHLO mx1.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760735Ab1D2SN6 (ORCPT ); Fri, 29 Apr 2011 14:13:58 -0400 Subject: [GIT PULL] SCSI fixes for 2.6.39-rc5 From: James Bottomley To: Andrew Morton , Linus Torvalds Cc: linux-scsi , linux-kernel Content-Type: text/plain; charset="UTF-8" Date: Fri, 29 Apr 2011 13:13:51 -0500 Message-ID: <1304100831.2559.32.camel@mulgrave.site> Mime-Version: 1.0 X-Mailer: Evolution 2.32.1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6155 Lines: 187 This is a set of assorted fixes including a couple of user induceable oopses using card interfaces. The main one is closing a race between the last put of a device and the queues starting up, which has been there for ages, but only just started to show. The patch is available here: master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git The short changelog is: Dan Rosenberg (2): pmcraid: reject negative request size mpt2sas: prevent heap overflows and unchecked reads James Bottomley (1): put stricter guards on queue dead checks Mike Snitzer (1): scsi_dh: fix reference counting in scsi_dh_activate error path The diffstat is: drivers/scsi/device_handler/scsi_dh.c | 9 ++++++--- drivers/scsi/mpt2sas/mpt2sas_ctl.c | 23 +++++++++++++++++++++-- drivers/scsi/pmcraid.c | 3 +++ drivers/scsi/scsi_sysfs.c | 16 ++++++++-------- 4 files changed, 38 insertions(+), 13 deletions(-) and the full patch is appended. James --- diff --git a/drivers/scsi/device_handler/scsi_dh.c b/drivers/scsi/device_handler/scsi_dh.c index 564e6ec..0119b81 100644 --- a/drivers/scsi/device_handler/scsi_dh.c +++ b/drivers/scsi/device_handler/scsi_dh.c @@ -394,12 +394,14 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data) unsigned long flags; struct scsi_device *sdev; struct scsi_device_handler *scsi_dh = NULL; + struct device *dev = NULL; spin_lock_irqsave(q->queue_lock, flags); sdev = q->queuedata; if (sdev && sdev->scsi_dh_data) scsi_dh = sdev->scsi_dh_data->scsi_dh; - if (!scsi_dh || !get_device(&sdev->sdev_gendev) || + dev = get_device(&sdev->sdev_gendev); + if (!scsi_dh || !dev || sdev->sdev_state == SDEV_CANCEL || sdev->sdev_state == SDEV_DEL) err = SCSI_DH_NOSYS; @@ -410,12 +412,13 @@ int scsi_dh_activate(struct request_queue *q, activate_complete fn, void *data) if (err) { if (fn) fn(data, err); - return err; + goto out; } if (scsi_dh->activate) err = scsi_dh->activate(sdev, fn, data); - put_device(&sdev->sdev_gendev); +out: + put_device(dev); return err; } EXPORT_SYMBOL_GPL(scsi_dh_activate); diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c index 1c6d2b4..d72f1f2 100644 --- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c +++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c @@ -688,6 +688,13 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc, goto out; } + /* Check for overflow and wraparound */ + if (karg.data_sge_offset * 4 > ioc->request_sz || + karg.data_sge_offset > (UINT_MAX / 4)) { + ret = -EINVAL; + goto out; + } + /* copy in request message frame from user */ if (copy_from_user(mpi_request, mf, karg.data_sge_offset*4)) { printk(KERN_ERR "failure at %s:%d/%s()!\n", __FILE__, __LINE__, @@ -1963,7 +1970,7 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state) Mpi2DiagBufferPostReply_t *mpi_reply; int rc, i; u8 buffer_type; - unsigned long timeleft; + unsigned long timeleft, request_size, copy_size; u16 smid; u16 ioc_status; u8 issue_reset = 0; @@ -1999,6 +2006,8 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state) return -ENOMEM; } + request_size = ioc->diag_buffer_sz[buffer_type]; + if ((karg.starting_offset % 4) || (karg.bytes_to_read % 4)) { printk(MPT2SAS_ERR_FMT "%s: either the starting_offset " "or bytes_to_read are not 4 byte aligned\n", ioc->name, @@ -2006,13 +2015,23 @@ _ctl_diag_read_buffer(void __user *arg, enum block_state state) return -EINVAL; } + if (karg.starting_offset > request_size) + return -EINVAL; + diag_data = (void *)(request_data + karg.starting_offset); dctlprintk(ioc, printk(MPT2SAS_INFO_FMT "%s: diag_buffer(%p), " "offset(%d), sz(%d)\n", ioc->name, __func__, diag_data, karg.starting_offset, karg.bytes_to_read)); + /* Truncate data on requests that are too large */ + if ((diag_data + karg.bytes_to_read < diag_data) || + (diag_data + karg.bytes_to_read > request_data + request_size)) + copy_size = request_size - karg.starting_offset; + else + copy_size = karg.bytes_to_read; + if (copy_to_user((void __user *)uarg->diagnostic_data, - diag_data, karg.bytes_to_read)) { + diag_data, copy_size)) { printk(MPT2SAS_ERR_FMT "%s: Unable to write " "mpt_diag_read_buffer_t data @ %p\n", ioc->name, __func__, diag_data); diff --git a/drivers/scsi/pmcraid.c b/drivers/scsi/pmcraid.c index 96d5ad0..7f636b1 100644 --- a/drivers/scsi/pmcraid.c +++ b/drivers/scsi/pmcraid.c @@ -3814,6 +3814,9 @@ static long pmcraid_ioctl_passthrough( rc = -EFAULT; goto out_free_buffer; } + } else if (request_size < 0) { + rc = -EINVAL; + goto out_free_buffer; } /* check if we have any additional command parameters */ diff --git a/drivers/scsi/scsi_sysfs.c b/drivers/scsi/scsi_sysfs.c index e44ff64..e639125 100644 --- a/drivers/scsi/scsi_sysfs.c +++ b/drivers/scsi/scsi_sysfs.c @@ -322,14 +322,8 @@ static void scsi_device_dev_release_usercontext(struct work_struct *work) kfree(evt); } - if (sdev->request_queue) { - sdev->request_queue->queuedata = NULL; - /* user context needed to free queue */ - scsi_free_queue(sdev->request_queue); - /* temporary expedient, try to catch use of queue lock - * after free of sdev */ - sdev->request_queue = NULL; - } + /* NULL queue means the device can't be used */ + sdev->request_queue = NULL; scsi_target_reap(scsi_target(sdev)); @@ -937,6 +931,12 @@ void __scsi_remove_device(struct scsi_device *sdev) if (sdev->host->hostt->slave_destroy) sdev->host->hostt->slave_destroy(sdev); transport_destroy_device(dev); + + /* cause the request function to reject all I/O requests */ + sdev->request_queue->queuedata = NULL; + + /* Freeing the queue signals to block that we're done */ + scsi_free_queue(sdev->request_queue); put_device(dev); } -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/