Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754072Ab1EALNY (ORCPT ); Sun, 1 May 2011 07:13:24 -0400 Received: from mailout-de.gmx.net ([213.165.64.22]:57083 "HELO mailout-de.gmx.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with SMTP id S1753206Ab1EALNS (ORCPT ); Sun, 1 May 2011 07:13:18 -0400 X-Authenticated: #19862253 X-Provags-ID: V01U2FsdGVkX1+oedIC5rCofb210pVip5t7d6WIHjytqzfRnJv15z g3WndBYw+Pq38Z Date: Sun, 1 May 2011 13:13:03 +0200 From: Cedric Sodhi To: linux-kernel@vger.kernel.org Subject: Re: Status of vgaswitcheroo - Devastating! Message-ID: <20110501111303.GA2139@fly> References: <20110430210930.268900@gmx.net> MIME-Version: 1.0 Content-Type: multipart/mixed; boundary="WIyZ46R2i8wDzkSu" Content-Disposition: inline In-Reply-To: <20110430210930.268900@gmx.net> User-Agent: Mutt/1.5.21 (2010-09-15) X-Y-GMX-Trusted: 0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 75562 Lines: 1779 --WIyZ46R2i8wDzkSu Content-Type: text/plain; charset=us-ascii Content-Disposition: inline With ATI (, +kms) and Intel i915 (, +kms) I manage to boot into console, but ONLY if I blacklist the Intel drivers. If I probe the intel driver *WITH* modeset at *ANY* time (on boot by not blacklisting them or later), my screen turns black. Besides, on dmesg I get confirmation, that VGA switcheroo: detected switching method \_.SB_.PCI0.GFX0.ATPX handle but I do not get a vgaswitcheroo interface in debugfs of the kernel. I attached dmesg, so maybe someone spots something. --WIyZ46R2i8wDzkSu Content-Type: text/plain; charset=us-ascii Content-Disposition: attachment; filename="dmesg.log" Linux version 2.6.39-rc5 (root@fly) (gcc version 4.4.5 (Gentoo 4.4.5 p1.2, pie-0.4.5) ) #2 SMP PREEMPT Sun May 1 09:19:10 CEST 2011 Command line: auto BOOT_IMAGE=Gentoo-39 ro root=801 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009d000 (usable) BIOS-e820: 000000000009d000 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000009b63f000 (usable) BIOS-e820: 000000009b63f000 - 000000009b6bf000 (reserved) BIOS-e820: 000000009b6bf000 - 000000009b7bf000 (ACPI NVS) BIOS-e820: 000000009b7bf000 - 000000009b7ff000 (ACPI data) BIOS-e820: 000000009b7ff000 - 000000009b800000 (usable) BIOS-e820: 000000009b800000 - 00000000a0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved) BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved) BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000158000000 (usable) NX (Execute Disable) protection: active DMI 2.6 present. DMI: Hewlett-Packard HP TouchSmart tm2 Notebook PC /1486, BIOS F.23 10/28/2010 e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) e820 remove range: 00000000000a0000 - 0000000000100000 (usable) No AGP bridge found last_pfn = 0x158000 max_arch_pfn = 0x400000000 MTRR default type: uncachable MTRR fixed ranges enabled: 00000-9FFFF write-back A0000-BFFFF uncachable C0000-EFFFF write-through F0000-FFFFF write-combining MTRR variable ranges enabled: 0 base 000000000 mask F80000000 write-back 1 base 0FFE00000 mask FFFE00000 write-protect 2 base 080000000 mask FE0000000 write-back 3 base 09C000000 mask FFC000000 uncachable 4 base 09B800000 mask FFF800000 uncachable 5 base 100000000 mask F80000000 write-back 6 base 158000000 mask FF8000000 uncachable 7 base 160000000 mask FE0000000 uncachable x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 last_pfn = 0x9b800 max_arch_pfn = 0x400000000 initial memory mapped : 0 - 20000000 Base memory trampoline at [ffff880000098000] 98000 size 20480 init_memory_mapping: 0000000000000000-000000009b800000 0000000000 - 009b800000 page 2M kernel direct mapping tables up to 9b800000 @ 9b63b000-9b63f000 init_memory_mapping: 0000000100000000-0000000158000000 0100000000 - 0158000000 page 2M kernel direct mapping tables up to 158000000 @ 157ff9000-158000000 ACPI: RSDP 00000000000fe020 00024 (v02 HP ) ACPI: XSDT 000000009b7fe120 00094 (v01 HPQOEM SLIC-MPC 00000001 01000013) ACPI: FACP 000000009b7fc000 000F4 (v04 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: DSDT 000000009b7e9000 0FCE7 (v02 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: FACS 000000009b75e000 00040 ACPI: ASF! 000000009b7fd000 000A5 (v32 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: HPET 000000009b7fb000 00038 (v01 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: APIC 000000009b7fa000 0008C (v02 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: MCFG 000000009b7f9000 0003C (v01 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: SLIC 000000009b7e8000 00176 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 000000009b7e6000 01152 (v01 TrmRef PtidDevc 00001000 INTL 20051117) ACPI: SSDT 000000009b7e5000 00172 (v01 VaRef Va_Acpi 00003000 INTL 20051117) ACPI: BOOT 000000009b7e4000 00028 (v01 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 000000009b7e3000 00C39 (v01 INTEL SataPri 00001000 INTL 20051117) ACPI: SSDT 000000009b7e2000 006C5 (v01 INTEL SataSec 00001000 INTL 20051117) ACPI: ASPT 000000009b7e1000 00034 (v04 HP SLIC-MPC 00000001 MSFT 01000013) ACPI: SSDT 000000009b7e0000 009F1 (v01 PmRef CpuPm 00003000 INTL 20051117) ACPI: SSDT 000000009b7de000 01A8F (v01 AmdRef AmdTabl 00001000 INTL 20051117) ACPI: Local APIC address 0xfee00000 [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff880148200000-ffff88014b9fffff] on node 0 Zone PFN ranges: DMA 0x00000010 -> 0x00001000 DMA32 0x00001000 -> 0x00100000 Normal 0x00100000 -> 0x00158000 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0x00000010 -> 0x0000009d 0: 0x00000100 -> 0x0009b63f 0: 0x0009b7ff -> 0x0009b800 0: 0x00100000 -> 0x00158000 On node 0 totalpages: 996813 DMA zone: 56 pages used for memmap DMA zone: 5 pages reserved DMA zone: 3920 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 618104 pages, LIFO batch:31 Normal zone: 4928 pages used for memmap Normal zone: 355520 pages, LIFO batch:31 ACPI: PM-Timer IO Port: 0x408 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Using ACPI (MADT) for SMP configuration information ACPI: HPET id: 0x8086a201 base: 0xfed00000 8 Processors exceeds NR_CPUS limit of 4 SMP: Allowing 4 CPUs, 0 hotplug CPUs nr_irqs_gsi: 40 PM: Registered nosave memory: 000000000009d000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 PM: Registered nosave memory: 000000009b63f000 - 000000009b6bf000 PM: Registered nosave memory: 000000009b6bf000 - 000000009b7bf000 PM: Registered nosave memory: 000000009b7bf000 - 000000009b7ff000 PM: Registered nosave memory: 000000009b800000 - 00000000a0000000 PM: Registered nosave memory: 00000000a0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000feb00000 PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000 PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000 PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000 PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000 PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000 PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000 PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000 PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000 PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000 PM: Registered nosave memory: 00000000fee01000 - 00000000ffe00000 PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000 Allocating PCI resources starting at a0000000 (gap: a0000000:40000000) setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1 PERCPU: Embedded 26 pages/cpu @ffff880157c00000 s73856 r8192 d24448 u524288 pcpu-alloc: s73856 r8192 d24448 u524288 alloc=1*2097152 pcpu-alloc: [0] 0 1 2 3 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 977544 Kernel command line: auto BOOT_IMAGE=Gentoo-39 ro root=801 PID hash table entries: 4096 (order: 3, 32768 bytes) Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) Checking aperture... No AGP bridge found Memory: 3850396k/5636096k available (3735k kernel code, 1648844k absent, 136856k reserved, 2108k data, 432k init) SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 Preemptable hierarchical RCU implementation. CONFIG_RCU_FANOUT set to non-default value of 32 RCU-based detection of stalled CPUs is disabled. Verbose stalled-CPUs detection is disabled. NR_IRQS:384 Extended CMOS year: 2000 Console: colour dummy device 80x25 console [tty0] enabled hpet clockevent registered Fast TSC calibration using PIT Detected 1197.111 MHz processor. Calibrating delay loop (skipped), value calculated using timer frequency.. 2394.22 BogoMIPS (lpj=4788444) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 256 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 mce: CPU supports 9 MCE banks CPU0: Thermal monitoring handled by SMI using mwait in idle threads. ACPI: Core revision 20110316 Setting APIC routing to flat ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 CPU0: Intel(R) Core(TM) i5 CPU U 430 @ 1.20GHz stepping 05 Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver. ... version: 3 ... bit width: 48 ... generic registers: 4 ... value mask: 0000ffffffffffff ... max period: 000000007fffffff ... fixed-purpose events: 3 ... event mask: 000000070000000f Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 98000 CPU1: Thermal monitoring handled by SMI #2 smpboot cpu 2: start_ip = 98000 CPU2: Thermal monitoring handled by SMI #3 Ok. smpboot cpu 3: start_ip = 98000 CPU3: Thermal monitoring handled by SMI Brought up 4 CPUs Total of 4 processors activated (9576.07 BogoMIPS). PM: Adding info for No Bus:platform PM: Registering ACPI NVS region at 9b6bf000 (1048576 bytes) NET: Registered protocol family 16 PM: Adding info for No Bus:vtcon0 ACPI FADT declares the system doesn't support PCIe ASPM, so disable it ACPI: bus type pci registered PM: Adding info for No Bus:id PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820 PCI: Using configuration type 1 for base access PM: Adding info for No Bus:default bio: create slab at 0 ACPI: EC: Look up EC in DSDT ACPI: Executed 1 blocks of module-level executable AML code [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored ACPI: SSDT 000000009b691a98 00334 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00334 (v01 PmRef Cpu0Ist 00003000 INTL 20051117) ACPI: SSDT 000000009b690018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117) ACPI: SSDT 000000009b691718 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117) ACPI: SSDT 000000009b68fd98 00119 (v01 PmRef ApCst 00003000 INTL 20051117) ACPI: Dynamic OEM Table Load: ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117) ACPI: Interpreter enabled ACPI: (supports S0 S3 S4 S5) ACPI: Using IOAPIC for interrupt routing PM: Adding info for acpi:LNXSYSTM:00 PM: Adding info for acpi:LNXCPU:00 PM: Adding info for acpi:LNXCPU:01 PM: Adding info for acpi:LNXCPU:02 PM: Adding info for acpi:LNXCPU:03 PM: Adding info for acpi:LNXCPU:04 PM: Adding info for acpi:LNXCPU:05 PM: Adding info for acpi:LNXCPU:06 PM: Adding info for acpi:LNXCPU:07 PM: Adding info for acpi:device:00 PM: Adding info for acpi:PNP0A08:00 PM: Adding info for acpi:LNXVIDEO:00 PM: Adding info for acpi:device:01 PM: Adding info for acpi:device:02 PM: Adding info for acpi:device:03 PM: Adding info for acpi:device:04 PM: Adding info for acpi:device:05 PM: Adding info for acpi:device:06 PM: Adding info for acpi:device:07 PM: Adding info for acpi:device:08 PM: Adding info for acpi:device:09 [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness PM: Adding info for acpi:LNXVIDEO:01 PM: Adding info for acpi:device:0a PM: Adding info for acpi:device:0b PM: Adding info for acpi:device:0c PM: Adding info for acpi:device:0d PM: Adding info for acpi:device:0e PM: Adding info for acpi:device:0f PM: Adding info for acpi:device:10 PM: Adding info for acpi:device:11 PM: Adding info for acpi:device:12 PM: Adding info for acpi:device:13 PM: Adding info for acpi:PNP0C09:00 PM: Adding info for acpi:PNP0200:00 PM: Adding info for acpi:INT0800:00 PM: Adding info for acpi:PNP0103:00 PM: Adding info for acpi:PNP0000:00 PM: Adding info for acpi:PNP0C04:00 PM: Adding info for acpi:PNP0C02:00 PM: Adding info for acpi:PNP0B00:00 PM: Adding info for acpi:PNP0100:00 PM: Adding info for acpi:PNP0303:00 PM: Adding info for acpi:SYN1E2D:00 PM: Adding info for acpi:device:14 PM: Adding info for acpi:device:15 PM: Adding info for acpi:device:16 PM: Adding info for acpi:device:17 PM: Adding info for acpi:device:18 PM: Adding info for acpi:device:19 PM: Adding info for acpi:device:1a PM: Adding info for acpi:device:1b PM: Adding info for acpi:device:1c PM: Adding info for acpi:device:1d PM: Adding info for acpi:device:1e PM: Adding info for acpi:device:1f PM: Adding info for acpi:device:20 PM: Adding info for acpi:device:21 PM: Adding info for acpi:device:22 PM: Adding info for acpi:device:23 PM: Adding info for acpi:device:24 PM: Adding info for acpi:device:25 PM: Adding info for acpi:device:26 PM: Adding info for acpi:device:27 PM: Adding info for acpi:device:28 PM: Adding info for acpi:device:29 PM: Adding info for acpi:device:2a PM: Adding info for acpi:device:2b PM: Adding info for acpi:device:2c PM: Adding info for acpi:device:2d PM: Adding info for acpi:device:2e PM: Adding info for acpi:device:2f PM: Adding info for acpi:device:30 PM: Adding info for acpi:device:31 PM: Adding info for acpi:device:32 PM: Adding info for acpi:device:33 PM: Adding info for acpi:device:34 PM: Adding info for acpi:device:35 PM: Adding info for acpi:device:36 PM: Adding info for acpi:device:37 PM: Adding info for acpi:device:38 PM: Adding info for acpi:device:39 PM: Adding info for acpi:device:3a PM: Adding info for acpi:device:3b PM: Adding info for acpi:device:3c PM: Adding info for acpi:device:3d PM: Adding info for acpi:device:3e PM: Adding info for acpi:device:3f PM: Adding info for acpi:device:40 PM: Adding info for acpi:device:41 PM: Adding info for acpi:device:42 PM: Adding info for acpi:device:43 PM: Adding info for acpi:device:44 PM: Adding info for acpi:device:45 PM: Adding info for acpi:device:46 PM: Adding info for acpi:device:47 PM: Adding info for acpi:device:48 PM: Adding info for acpi:device:49 PM: Adding info for acpi:device:4a PM: Adding info for acpi:device:4b PM: Adding info for acpi:device:4c PM: Adding info for acpi:device:4d PM: Adding info for acpi:device:4e PM: Adding info for acpi:device:4f PM: Adding info for acpi:device:50 PM: Adding info for acpi:device:51 PM: Adding info for acpi:device:52 PM: Adding info for acpi:device:53 PM: Adding info for acpi:device:54 PM: Adding info for acpi:device:55 PM: Adding info for acpi:device:56 PM: Adding info for acpi:device:57 PM: Adding info for acpi:device:58 [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness PM: Adding info for acpi:LNXVIDEO:02 PM: Adding info for acpi:device:59 PM: Adding info for acpi:device:5a PM: Adding info for acpi:device:5b PM: Adding info for acpi:device:5c PM: Adding info for acpi:device:5d PM: Adding info for acpi:HPQ0004:00 PM: Adding info for acpi:PNP0C02:01 PM: Adding info for acpi:device:5e PM: Adding info for acpi:INT5400:00 PM: Adding info for acpi:device:5f PM: Adding info for acpi:device:60 PM: Adding info for acpi:device:61 PM: Adding info for acpi:device:62 PM: Adding info for acpi:device:63 PM: Adding info for acpi:device:64 PM: Adding info for acpi:device:65 PM: Adding info for acpi:device:66 PM: Adding info for acpi:device:67 PM: Adding info for acpi:device:68 PM: Adding info for acpi:device:69 PM: Adding info for acpi:PNP0C0F:00 PM: Adding info for acpi:PNP0C0F:01 PM: Adding info for acpi:PNP0C0F:02 PM: Adding info for acpi:PNP0C0F:03 PM: Adding info for acpi:PNP0C0F:04 PM: Adding info for acpi:PNP0C0F:05 PM: Adding info for acpi:PNP0C0F:06 PM: Adding info for acpi:PNP0C0F:07 PM: Adding info for acpi:PNP0C0D:00 PM: Adding info for acpi:PNP0C0C:00 PM: Adding info for acpi:PNP0C0A:00 PM: Adding info for acpi:ACPI0003:00 PM: Adding info for acpi:PNP0C14:00 PM: Adding info for acpi:PNP0A03:00 PM: Adding info for acpi:device:6a PM: Adding info for acpi:INT340E:00 PM: Adding info for acpi:device:6b PM: Adding info for acpi:LNXPOWER:00 ACPI: Power Resource [FN00] (on) PM: Adding info for acpi:PNP0C0B:00 PM: Adding info for acpi:LNXTHERM:00 PM: Adding info for acpi:LNXTHERM:01 PM: Adding info for acpi:LNXTHERM:02 PM: Adding info for acpi:LNXPWRBN:00 ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 8 1f ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe]) PM: Adding info for No Bus:pci0000:00 PM: Adding info for No Bus:0000:00 pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] pci_root PNP0A08:00: host bridge window [mem 0xa0000000-0xfeafffff] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600 pci 0000:00:00.0: rpm_resume flags 0x0 pci 0000:00:00.0: rpm_resume returns -11 pci 0000:00:01.0: [8086:0045] type 1 class 0x000604 pci 0000:00:01.0: rpm_resume flags 0x0 pci 0000:00:01.0: rpm_resume returns -11 pci 0000:00:01.0: PME# supported from D0 D3hot D3cold pci 0000:00:01.0: PME# disabled pci 0000:00:02.0: [8086:0046] type 0 class 0x000300 pci 0000:00:02.0: reg 10: [mem 0xc0000000-0xc03fffff 64bit] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref] pci 0000:00:02.0: reg 20: [io 0x4050-0x4057] pci 0000:00:02.0: rpm_resume flags 0x0 pci 0000:00:02.0: rpm_resume returns -11 pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780 pci 0000:00:16.0: reg 10: [mem 0xc4506100-0xc450610f 64bit] pci 0000:00:16.0: rpm_resume flags 0x0 pci 0000:00:16.0: rpm_resume returns -11 pci 0000:00:16.0: PME# supported from D0 D3hot D3cold pci 0000:00:16.0: PME# disabled pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03 pci 0000:00:1a.0: reg 10: [mem 0xc4505c00-0xc4505fff] pci 0000:00:1a.0: rpm_resume flags 0x0 pci 0000:00:1a.0: rpm_resume returns -11 pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold pci 0000:00:1a.0: PME# disabled pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403 pci 0000:00:1b.0: reg 10: [mem 0xc4500000-0xc4503fff 64bit] pci 0000:00:1b.0: rpm_resume flags 0x0 pci 0000:00:1b.0: rpm_resume returns -11 pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold pci 0000:00:1b.0: PME# disabled pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604 pci 0000:00:1c.0: rpm_resume flags 0x0 pci 0000:00:1c.0: rpm_resume returns -11 pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold pci 0000:00:1c.0: PME# disabled pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604 pci 0000:00:1c.1: rpm_resume flags 0x0 pci 0000:00:1c.1: rpm_resume returns -11 pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold pci 0000:00:1c.1: PME# disabled pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03 pci 0000:00:1d.0: reg 10: [mem 0xc4505800-0xc4505bff] pci 0000:00:1d.0: rpm_resume flags 0x0 pci 0000:00:1d.0: rpm_resume returns -11 pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold pci 0000:00:1d.0: PME# disabled pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604 pci 0000:00:1e.0: rpm_resume flags 0x0 pci 0000:00:1e.0: rpm_resume returns -11 pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601 pci 0000:00:1f.0: rpm_resume flags 0x0 pci 0000:00:1f.0: rpm_resume returns -11 pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106 pci 0000:00:1f.2: reg 10: [io 0x4048-0x404f] pci 0000:00:1f.2: reg 14: [io 0x405c-0x405f] pci 0000:00:1f.2: reg 18: [io 0x4040-0x4047] pci 0000:00:1f.2: reg 1c: [io 0x4058-0x405b] pci 0000:00:1f.2: reg 20: [io 0x4020-0x403f] pci 0000:00:1f.2: reg 24: [mem 0xc4505000-0xc45057ff] pci 0000:00:1f.2: rpm_resume flags 0x0 pci 0000:00:1f.2: rpm_resume returns -11 pci 0000:00:1f.2: PME# supported from D3hot pci 0000:00:1f.2: PME# disabled pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05 pci 0000:00:1f.3: reg 10: [mem 0xc4506000-0xc45060ff 64bit] pci 0000:00:1f.3: reg 20: [io 0x4000-0x401f] pci 0000:00:1f.3: rpm_resume flags 0x0 pci 0000:00:1f.3: rpm_resume returns -11 pci 0000:00:1f.6: [8086:3b32] type 0 class 0x001180 pci 0000:00:1f.6: reg 10: [mem 0xc4504000-0xc4504fff 64bit] pci 0000:00:1f.6: rpm_resume flags 0x0 pci 0000:00:1f.6: rpm_resume returns -11 pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300 pci 0000:01:00.0: reg 10: [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:01:00.0: reg 18: [mem 0xc4400000-0xc441ffff 64bit] pci 0000:01:00.0: reg 20: [io 0x3000-0x30ff] pci 0000:01:00.0: reg 30: [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: rpm_resume flags 0x0 pci 0000:01:00.0: rpm_resume returns -11 pci 0000:01:00.0: supports D1 D2 pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403 pci 0000:01:00.1: reg 10: [mem 0xc4420000-0xc4423fff 64bit] pci 0000:01:00.1: rpm_resume flags 0x0 pci 0000:01:00.1: rpm_resume returns -11 pci 0000:01:00.1: supports D1 D2 pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:02:00.0: [10ec:8168] type 0 class 0x000200 pci 0000:02:00.0: reg 10: [io 0x2000-0x20ff] pci 0000:02:00.0: reg 18: [mem 0xc0404000-0xc0404fff 64bit pref] pci 0000:02:00.0: reg 20: [mem 0xc0400000-0xc0403fff 64bit pref] pci 0000:02:00.0: rpm_resume flags 0x0 pci 0000:02:00.0: rpm_resume returns -11 pci 0000:02:00.0: supports D1 D2 pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold pci 0000:02:00.0: PME# disabled pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] pci 0000:03:00.0: [14e4:4727] type 0 class 0x000280 pci 0000:03:00.0: reg 10: [mem 0xc2400000-0xc2403fff 64bit] pci 0000:03:00.0: rpm_resume flags 0x0 pci 0000:03:00.0: rpm_resume returns -11 pci 0000:03:00.0: supports D1 D2 pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) pci 0000:00:1e.0: bridge window [mem 0xa0000000-0xfeafffff] (subtractive decode) pci_bus 0000:00: on NUMA node 0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] \_SB_.PCI0:_OSC invalid UUID _OSC request data:1 9 1f PM: Adding info for pci:0000:00:00.0 PM: Adding info for pci:0000:00:01.0 PM: Adding info for pci:0000:00:02.0 PM: Adding info for pci:0000:00:16.0 PM: Adding info for pci:0000:00:1a.0 PM: Adding info for pci:0000:00:1b.0 PM: Adding info for pci:0000:00:1c.0 PM: Adding info for pci:0000:00:1c.1 PM: Adding info for pci:0000:00:1d.0 PM: Adding info for pci:0000:00:1e.0 PM: Adding info for pci:0000:00:1f.0 PM: Adding info for pci:0000:00:1f.2 PM: Adding info for pci:0000:00:1f.3 PM: Adding info for pci:0000:00:1f.6 PM: Adding info for pci:0000:01:00.0 PM: Adding info for pci:0000:01:00.1 PM: Adding info for No Bus:0000:01 PM: Adding info for pci:0000:02:00.0 PM: Adding info for No Bus:0000:02 PM: Adding info for pci:0000:03:00.0 PM: Adding info for No Bus:0000:03 PM: Adding info for No Bus:0000:04 ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus ff]) PM: Adding info for No Bus:pci0000:ff PM: Adding info for No Bus:0000:ff pci 0000:ff:00.0: [8086:2c62] type 0 class 0x000600 pci 0000:ff:00.0: rpm_resume flags 0x0 pci 0000:ff:00.0: rpm_resume returns -11 pci 0000:ff:00.1: [8086:2d01] type 0 class 0x000600 pci 0000:ff:00.1: rpm_resume flags 0x0 pci 0000:ff:00.1: rpm_resume returns -11 pci 0000:ff:02.0: [8086:2d10] type 0 class 0x000600 pci 0000:ff:02.0: rpm_resume flags 0x0 pci 0000:ff:02.0: rpm_resume returns -11 pci 0000:ff:02.1: [8086:2d11] type 0 class 0x000600 pci 0000:ff:02.1: rpm_resume flags 0x0 pci 0000:ff:02.1: rpm_resume returns -11 pci 0000:ff:02.2: [8086:2d12] type 0 class 0x000600 pci 0000:ff:02.2: rpm_resume flags 0x0 pci 0000:ff:02.2: rpm_resume returns -11 pci 0000:ff:02.3: [8086:2d13] type 0 class 0x000600 pci 0000:ff:02.3: rpm_resume flags 0x0 pci 0000:ff:02.3: rpm_resume returns -11 pci_bus 0000:ff: on NUMA node 0 PM: Adding info for pci:0000:ff:00.0 PM: Adding info for pci:0000:ff:00.1 PM: Adding info for pci:0000:ff:02.0 PM: Adding info for pci:0000:ff:02.1 PM: Adding info for pci:0000:ff:02.2 PM: Adding info for pci:0000:ff:02.3 ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10 ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15) ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. PM: Adding info for No Bus:vga_arbiter vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none vgaarb: loaded SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb Advanced Linux Sound Architecture Driver Version 1.0.24. PCI: Using ACPI for IRQ routing PCI: pci_cache_line_size set to 64 bytes reserve RAM buffer: 000000000009d000 - 000000000009ffff reserve RAM buffer: 000000009b63f000 - 000000009bffffff reserve RAM buffer: 000000009b800000 - 000000009bffffff PM: Adding info for No Bus:lo PM: Adding info for platform:regulatory.0 cfg80211: Calling CRDA to update world regulatory domain hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0 hpet0: 8 comparators, 64-bit 14.318180 MHz counter Switching to clocksource hpet pnp: PnP ACPI init PM: Adding info for No Bus:pnp0 ACPI: bus type pnp registered pnp 00:00: [bus 00-fe] pnp 00:00: [io 0x0000-0x0cf7 window] pnp 00:00: [io 0x0cf8-0x0cff] pnp 00:00: [io 0x0d00-0xffff window] pnp 00:00: [mem 0x000a0000-0x000bffff window] pnp 00:00: [mem 0x000c0000-0x000c3fff window] pnp 00:00: [mem 0x000c4000-0x000c7fff window] pnp 00:00: [mem 0x000c8000-0x000cbfff window] pnp 00:00: [mem 0x000cc000-0x000cffff window] pnp 00:00: [mem 0x000d0000-0x000d3fff window] pnp 00:00: [mem 0x000d4000-0x000d7fff window] pnp 00:00: [mem 0x000d8000-0x000dbfff window] pnp 00:00: [mem 0x000dc000-0x000dffff window] pnp 00:00: [mem 0x000e0000-0x000e3fff window] pnp 00:00: [mem 0x000e4000-0x000e7fff window] pnp 00:00: [mem 0x000e8000-0x000ebfff window] pnp 00:00: [mem 0x000ec000-0x000effff window] pnp 00:00: [mem 0x000f0000-0x000fffff window] pnp 00:00: [mem 0xa0000000-0xfeafffff window] pnp 00:00: [mem 0xfed40000-0xfed44fff window] PM: Adding info for pnp:00:00 pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active) pnp 00:01: [io 0x0000-0x001f] pnp 00:01: [io 0x0081-0x0091] pnp 00:01: [io 0x0093-0x009f] pnp 00:01: [io 0x00c0-0x00df] pnp 00:01: [dma 4] PM: Adding info for pnp:00:01 pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active) pnp 00:02: [mem 0xff000000-0xffffffff] PM: Adding info for pnp:00:02 pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active) pnp 00:03: [mem 0xfed00000-0xfed003ff] PM: Adding info for pnp:00:03 pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active) pnp 00:04: [io 0x00f0] pnp 00:04: [irq 13] PM: Adding info for pnp:00:04 Switched to NOHz mode on CPU #0 pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active) pnp 00:05: [io 0x002e-0x002f] pnp 00:05: [io 0x004e-0x004f] pnp 00:05: [io 0x0061] pnp 00:05: [io 0x0063] pnp 00:05: [io 0x0065] pnp 00:05: [io 0x0067] pnp 00:05: [io 0x0070] pnp 00:05: [io 0x0080] pnp 00:05: [io 0x0092] pnp 00:05: [io 0x00b2-0x00b3] pnp 00:05: [io 0x0680-0x069f] pnp 00:05: [io 0x0800-0x080f] pnp 00:05: [io 0x0810-0x0813] pnp 00:05: [io 0xffff] pnp 00:05: [io 0x0400-0x047f] pnp 00:05: [io 0x0500-0x0501] pnp 00:05: [io 0x0700-0x077f] pnp 00:05: [io 0x164e-0x164f] Switched to NOHz mode on CPU #1 Switched to NOHz mode on CPU #2 pnp 00:05: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.1 BAR 7 [io 0x1000-0x1fff] Switched to NOHz mode on CPU #3 PM: Adding info for pnp:00:05 system 00:05: [io 0x0680-0x069f] has been reserved system 00:05: [io 0x0800-0x080f] has been reserved system 00:05: [io 0x0810-0x0813] has been reserved system 00:05: [io 0xffff] has been reserved system 00:05: [io 0x0400-0x047f] has been reserved system 00:05: [io 0x0500-0x0501] has been reserved system 00:05: [io 0x0700-0x077f] has been reserved system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:06: [io 0x0070-0x0077] pnp 00:06: [irq 8] PM: Adding info for pnp:00:06 pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active) pnp 00:07: [io 0x0060] pnp 00:07: [io 0x0064] pnp 00:07: [irq 1] PM: Adding info for pnp:00:07 pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active) pnp 00:08: [irq 12] PM: Adding info for pnp:00:08 pnp 00:08: Plug and Play ACPI device, IDs SYN1e2d SYN1e00 SYN0002 PNP0f13 (active) pnp 00:09: [irq 23] PM: Adding info for pnp:00:09 pnp 00:09: Plug and Play ACPI device, IDs HPQ0004 (active) pnp 00:0a: [mem 0xfed1c000-0xfed1ffff] pnp 00:0a: [mem 0xfed10000-0xfed13fff] pnp 00:0a: [mem 0xfed18000-0xfed18fff] pnp 00:0a: [mem 0xfed19000-0xfed19fff] pnp 00:0a: [mem 0xe0000000-0xefffffff] pnp 00:0a: [mem 0xfed20000-0xfed3ffff] pnp 00:0a: [mem 0xfed90000-0xfed8ffff disabled] pnp 00:0a: [mem 0xfed45000-0xfed8ffff] pnp 00:0a: [mem 0xff000000-0xffffffff] pnp 00:0a: [mem 0xfee00000-0xfeefffff] pnp 00:0a: [mem 0xc4600000-0xc4600fff] PM: Adding info for pnp:00:0a system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved system 00:0a: [mem 0xfed10000-0xfed13fff] has been reserved system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved system 00:0a: [mem 0xe0000000-0xefffffff] has been reserved system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved system 00:0a: [mem 0xfed45000-0xfed8ffff] has been reserved system 00:0a: [mem 0xff000000-0xffffffff] could not be reserved system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved system 00:0a: [mem 0xc4600000-0xc4600fff] has been reserved system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active) pnp 00:0b: [bus ff] PM: Adding info for pnp:00:0b pnp 00:0b: Plug and Play ACPI device, IDs PNP0a03 (active) pnp: PnP ACPI: found 12 devices ACPI: ACPI bus type pnp unregistered PM: Adding info for No Bus:mem PM: Adding info for No Bus:null PM: Adding info for No Bus:port PM: Adding info for No Bus:zero PM: Adding info for No Bus:full PM: Adding info for No Bus:random PM: Adding info for No Bus:urandom PM: Adding info for No Bus:kmsg PM: Adding info for No Bus:tty PM: Adding info for No Bus:console PM: Adding info for No Bus:tty0 PM: Adding info for No Bus:vcs PM: Adding info for No Bus:vcsa PM: Adding info for No Bus:vcs1 PM: Adding info for No Bus:vcsa1 PM: Adding info for No Bus:tty1 PM: Adding info for No Bus:tty2 PM: Adding info for No Bus:tty3 PM: Adding info for No Bus:tty4 PM: Adding info for No Bus:tty5 PM: Adding info for No Bus:tty6 PM: Adding info for No Bus:tty7 PM: Adding info for No Bus:tty8 PM: Adding info for No Bus:tty9 PM: Adding info for No Bus:tty10 PM: Adding info for No Bus:tty11 PM: Adding info for No Bus:tty12 PM: Adding info for No Bus:tty13 PM: Adding info for No Bus:tty14 PM: Adding info for No Bus:tty15 PM: Adding info for No Bus:tty16 PM: Adding info for No Bus:tty17 PM: Adding info for No Bus:tty18 PM: Adding info for No Bus:tty19 PM: Adding info for No Bus:tty20 PM: Adding info for No Bus:tty21 PM: Adding info for No Bus:tty22 PM: Adding info for No Bus:tty23 PM: Adding info for No Bus:tty24 PM: Adding info for No Bus:tty25 PM: Adding info for No Bus:tty26 PM: Adding info for No Bus:tty27 PM: Adding info for No Bus:tty28 PM: Adding info for No Bus:tty29 PM: Adding info for No Bus:tty30 PM: Adding info for No Bus:tty31 PM: Adding info for No Bus:tty32 PM: Adding info for No Bus:tty33 PM: Adding info for No Bus:tty34 PM: Adding info for No Bus:tty35 PM: Adding info for No Bus:tty36 PM: Adding info for No Bus:tty37 PM: Adding info for No Bus:tty38 PM: Adding info for No Bus:tty39 PM: Adding info for No Bus:tty40 PM: Adding info for No Bus:tty41 PM: Adding info for No Bus:tty42 PM: Adding info for No Bus:tty43 PM: Adding info for No Bus:tty44 PM: Adding info for No Bus:tty45 PM: Adding info for No Bus:tty46 PM: Adding info for No Bus:tty47 PM: Adding info for No Bus:tty48 PM: Adding info for No Bus:tty49 PM: Adding info for No Bus:tty50 PM: Adding info for No Bus:tty51 PM: Adding info for No Bus:tty52 PM: Adding info for No Bus:tty53 PM: Adding info for No Bus:tty54 PM: Adding info for No Bus:tty55 PM: Adding info for No Bus:tty56 PM: Adding info for No Bus:tty57 PM: Adding info for No Bus:tty58 PM: Adding info for No Bus:tty59 PM: Adding info for No Bus:tty60 PM: Adding info for No Bus:tty61 PM: Adding info for No Bus:tty62 PM: Adding info for No Bus:tty63 pci 0000:01:00.0: no compatible bridge window for [mem 0xfffe0000-0xffffffff pref] pci 0000:01:00.0: BAR 6: assigned [mem 0xc4440000-0xc445ffff pref] pci 0000:00:01.0: PCI bridge to [bus 01-01] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff] pci 0000:00:01.0: bridge window [mem 0xc4400000-0xc44fffff] pci 0000:00:01.0: bridge window [mem 0xa0000000-0xafffffff 64bit pref] pci 0000:00:1c.0: PCI bridge to [bus 02-02] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff] pci 0000:00:1c.0: bridge window [mem 0xc3400000-0xc43fffff] pci 0000:00:1c.0: bridge window [mem 0xc0400000-0xc13fffff 64bit pref] pci 0000:00:1c.1: PCI bridge to [bus 03-03] pci 0000:00:1c.1: bridge window [io 0x1000-0x1fff] pci 0000:00:1c.1: bridge window [mem 0xc2400000-0xc33fffff] pci 0000:00:1c.1: bridge window [mem 0xc1400000-0xc23fffff 64bit pref] pci 0000:00:1e.0: PCI bridge to [bus 04-04] pci 0000:00:1e.0: bridge window [io disabled] pci 0000:00:1e.0: bridge window [mem disabled] pci 0000:00:1e.0: bridge window [mem pref disabled] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:01.0: setting latency timer to 64 pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 pci 0000:00:1c.0: setting latency timer to 64 pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:1c.1: setting latency timer to 64 pci 0000:00:1e.0: setting latency timer to 64 pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:00: resource 7 [mem 0xa0000000-0xfeafffff] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff] pci_bus 0000:01: resource 1 [mem 0xc4400000-0xc44fffff] pci_bus 0000:01: resource 2 [mem 0xa0000000-0xafffffff 64bit pref] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff] pci_bus 0000:02: resource 1 [mem 0xc3400000-0xc43fffff] pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc13fffff 64bit pref] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff] pci_bus 0000:03: resource 1 [mem 0xc2400000-0xc33fffff] pci_bus 0000:03: resource 2 [mem 0xc1400000-0xc23fffff 64bit pref] pci_bus 0000:04: resource 4 [io 0x0000-0x0cf7] pci_bus 0000:04: resource 5 [io 0x0d00-0xffff] pci_bus 0000:04: resource 6 [mem 0x000a0000-0x000bffff] pci_bus 0000:04: resource 7 [mem 0xa0000000-0xfeafffff] NET: Registered protocol family 2 IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) IPv4 FIB: Using LC-trie version 0.409 TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered UDP hash table entries: 2048 (order: 4, 65536 bytes) UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes) NET: Registered protocol family 1 RPC: Registered udp transport module. RPC: Registered tcp transport module. RPC: Registered tcp NFSv4.1 backchannel transport module. pci 0000:00:02.0: Boot video device pci 0000:00:1a.0: EHCI: BIOS handoff pci 0000:00:1d.0: EHCI: BIOS handoff PCI: CLS 64 bytes, default 64 PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing 64MB software IO TLB between ffff88009763b000 - ffff88009b63b000 software IO TLB at phys 0x9763b000 - 0x9b63b000 Simple Boot Flag at 0x44 set to 0x1 PM: Adding info for No Bus:mcelog PM: Adding info for No Bus:cpu0 PM: Adding info for No Bus:cpu1 PM: Adding info for No Bus:cpu2 PM: Adding info for No Bus:cpu3 PM: Adding info for platform:pcspkr PM: Adding info for No Bus:snapshot PM: Adding info for event_source:cpu PM: Adding info for event_source:breakpoint PM: Adding info for event_source:software Installing knfsd (copyright (C) 1996 okir@monad.swb.de). msgmni has been set to 7520 alg: No test for stdrng (krng) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 PM: Adding info for No Bus:fbcon PM: Adding info for platform:vesafb.0 vesafb: mode is 1024x768x32, linelength=4096, pages=9 vesafb: scrolling: redraw vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 vesafb: framebuffer at 0xb0000000, mapped to 0xffffc90010180000, using 6144k, total 32704k PM: Adding info for No Bus:fb0 PM: Adding info for No Bus:vtcon1 Console: switching to colour frame buffer device 128x48 fb0: VESA VGA frame buffer device intel_idle: MWAIT substates: 0x1120 intel_idle: v0.4 model 0x25 intel_idle: lapic_timer_reliable_states 0xffffffff PM: Adding info for No Bus:AC ACPI: AC Adapter [AC] (on-line) PM: Adding info for No Bus:input0 input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0 ACPI: Lid Switch [LID0] PM: Adding info for No Bus:input1 input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 ACPI: Power Button [PWRB] PM: Adding info for No Bus:input2 input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 ACPI: Power Button [PWRF] PM: Adding info for No Bus:cooling_device0 ACPI: Fan [FAN0] (on) ACPI: acpi_idle yielding to intel_idle PM: Adding info for No Bus:cooling_device1 PM: Adding info for No Bus:cooling_device2 PM: Adding info for No Bus:cooling_device3 PM: Adding info for No Bus:cooling_device4 PM: Adding info for No Bus:thermal_zone0 thermal LNXTHERM:00: registered as thermal_zone0 ACPI: Thermal Zone [TZ00] (59 C) PM: Adding info for No Bus:thermal_zone1 thermal LNXTHERM:01: registered as thermal_zone1 ACPI: Thermal Zone [TZ01] (42 C) PM: Adding info for No Bus:thermal_zone2 thermal LNXTHERM:02: registered as thermal_zone2 ACPI: Thermal Zone [TZ02] (66 C) PM: Adding info for No Bus:ptmx PM: Adding info for No Bus:hpet Linux agpgart interface v0.103 agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable agpgart-intel 0000:00:00.0: detected 32768K stolen memory PM: Adding info for No Bus:agpgart agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000 PM: Adding info for No Bus:1:0 PM: Adding info for No Bus:ram0 PM: Adding info for No Bus:1:1 PM: Adding info for No Bus:ram1 PM: Adding info for No Bus:1:2 PM: Adding info for No Bus:ram2 PM: Adding info for No Bus:1:3 PM: Adding info for No Bus:ram3 PM: Adding info for No Bus:1:4 PM: Adding info for No Bus:ram4 PM: Adding info for No Bus:1:5 PM: Adding info for No Bus:ram5 PM: Adding info for No Bus:1:6 PM: Adding info for No Bus:ram6 PM: Adding info for No Bus:1:7 PM: Adding info for No Bus:ram7 PM: Adding info for No Bus:1:8 PM: Adding info for No Bus:ram8 PM: Adding info for No Bus:1:9 PM: Adding info for No Bus:ram9 PM: Adding info for No Bus:1:10 PM: Adding info for No Bus:ram10 PM: Adding info for No Bus:1:11 PM: Adding info for No Bus:ram11 PM: Adding info for No Bus:1:12 PM: Adding info for No Bus:ram12 PM: Adding info for No Bus:1:13 PM: Adding info for No Bus:ram13 PM: Adding info for No Bus:BAT0 PM: Adding info for No Bus:1:14 PM: Adding info for No Bus:ram14 PM: Adding info for No Bus:1:15 PM: Adding info for No Bus:ram15 brd: module loaded PM: Adding info for No Bus:7:0 PM: Adding info for No Bus:loop0 PM: Adding info for No Bus:7:1 PM: Adding info for No Bus:loop1 PM: Adding info for No Bus:7:2 PM: Adding info for No Bus:loop2 PM: Adding info for No Bus:7:3 PM: Adding info for No Bus:loop3 PM: Adding info for No Bus:7:4 PM: Adding info for No Bus:loop4 PM: Adding info for No Bus:7:5 PM: Adding info for No Bus:loop5 PM: Adding info for No Bus:7:6 PM: Adding info for No Bus:loop6 PM: Adding info for No Bus:7:7 PM: Adding info for No Bus:loop7 loop: module loaded ahci 0000:00:1f.2: version 3.0 ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19 ACPI: Battery Slot [BAT0] (battery present) ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x1 impl SATA mode ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pio slum part ems apst ahci 0000:00:1f.2: setting latency timer to 64 PM: Adding info for No Bus:ata1 PM: Adding info for No Bus:ata1 PM: Adding info for No Bus:link1 PM: Adding info for No Bus:link1 PM: Adding info for No Bus:dev1.0 PM: Adding info for No Bus:dev1.0 PM: Adding info for No Bus:ata2 PM: Adding info for No Bus:ata2 PM: Adding info for No Bus:link2 PM: Adding info for No Bus:link2 PM: Adding info for No Bus:dev2.0 PM: Adding info for No Bus:dev2.0 PM: Adding info for No Bus:ata3 PM: Adding info for No Bus:ata3 PM: Adding info for No Bus:link3 PM: Adding info for No Bus:link3 PM: Adding info for No Bus:dev3.0 PM: Adding info for No Bus:dev3.0 PM: Adding info for No Bus:ata4 PM: Adding info for No Bus:ata4 PM: Adding info for No Bus:link4 PM: Adding info for No Bus:link4 PM: Adding info for No Bus:dev4.0 PM: Adding info for No Bus:dev4.0 scsi0 : ahci PM: Adding info for scsi:host0 PM: Adding info for No Bus:host0 scsi1 : ahci PM: Adding info for scsi:host1 PM: Adding info for No Bus:host1 scsi2 : ahci PM: Adding info for scsi:host2 PM: Adding info for No Bus:host2 scsi3 : ahci PM: Adding info for scsi:host3 PM: Adding info for No Bus:host3 ata1: SATA max UDMA/133 abar m2048@0xc4505000 port 0xc4505100 irq 19 ata2: DUMMY Refined TSC clocksource calibration: 1196.998 MHz. Switching to clocksource tsc ata3: DUMMY ata4: DUMMY scsi host0: rpm_resume flags 0x4 scsi host1: rpm_resume flags 0x4 scsi host0: rpm_resume returns 1 scsi host1: rpm_resume returns 1 scsi host1: rpm_suspend flags 0x0 scsi host1: rpm_suspend returns 0 scsi host2: rpm_resume flags 0x4 scsi host2: rpm_resume returns 1 scsi host2: rpm_suspend flags 0x0 scsi host2: rpm_suspend returns 0 scsi host3: rpm_resume flags 0x4 scsi host3: rpm_resume returns 1 scsi host3: rpm_suspend flags 0x0 scsi host3: rpm_suspend returns 0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver ehci_hcd: block sizes: qh 104 qtd 96 itd 192 sitd 96 ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 ehci_hcd 0000:00:1a.0: setting latency timer to 64 ehci_hcd 0000:00:1a.0: EHCI Host Controller ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1a.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3 ehci_hcd 0000:00:1a.0: reset hcc_params 36881 caching frame 1024 64 bit addr ehci_hcd 0000:00:1a.0: support lpm ehci_hcd 0000:00:1a.0: debug port 2 ehci_hcd 0000:00:1a.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported ehci_hcd 0000:00:1a.0: supports USB remote wakeup ehci_hcd 0000:00:1a.0: irq 16, io mem 0xc4505c00 ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HTS725050A9A364, PC4OC72E, max UDMA/100 ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA ehci_hcd 0000:00:1a.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1a.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN ata1.00: configured for UDMA/100 ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00 usb usb1: rpm_resume flags 0x0 usb usb1: rpm_resume returns 1 usb usb1: default language 0x0409 usb usb1: udev 1, busnum 1, minor = 0 usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.39-rc5 ehci_hcd usb usb1: SerialNumber: 0000:00:1a.0 PM: Adding info for usb:usb1 usb usb1: usb_probe_device usb usb1: configuration #1 chosen from 1 choice usb usb1: rpm_resume flags 0x4 usb usb1: rpm_resume returns 1 usb usb1: adding 1-0:1.0 (config #1, interface 0) PM: Adding info for usb:1-0:1.0 hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id usb usb1: rpm_resume flags 0x4 usb usb1: rpm_resume returns 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 3 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 20ms hub 1-0:1.0: local power source is good hub 1-0:1.0: trying to enable port power on non-switchable hub PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 usb usb1: rpm_suspend flags 0xc usb usb1: rpm_suspend returns -16 ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 ehci_hcd 0000:00:1d.0: setting latency timer to 64 ehci_hcd 0000:00:1d.0: EHCI Host Controller ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT hub 1-0:1.0: port 1: status 0501 change 0001 hub 1-0:1.0: state 7 ports 3 chg 0002 evt 0000 hub 1-0:1.0: rpm_resume flags 0x4 hub 1-0:1.0: rpm_resume returns 1 hub 1-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1a.0: port 1 high speed ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT usb 1-1: new high speed USB device number 2 using ehci_hcd ehci_hcd 0000:00:1a.0: port 1 high speed ehci_hcd 0000:00:1a.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT ehci_hcd 0000:00:1a.0: set dev address 2 for port 1 ehci_hcd 0000:00:1a.0: LPM: no device attached usb 1-1: rpm_resume flags 0x0 usb 1-1: rpm_resume returns 1 scsi host0: rpm_suspend flags 0x0 scsi host0: rpm_suspend returns 0 scsi target0:0:0: rpm_resume flags 0x4 scsi target0:0:0: rpm_resume returns -11 scsi host0: rpm_resume flags 0x4 ahci 0000:00:1f.2: rpm_resume flags 0x0 ahci 0000:00:1f.2: rpm_resume returns 1 scsi host0: rpm_resume returns 0 scsi 0:0:0:0: Direct-Access ATA Hitachi HTS72505 PC4O PQ: 0 ANSI: 5 usb 1-1: udev 2, busnum 1, minor = 1 usb 1-1: New USB device found, idVendor=8087, idProduct=0020 usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 PM: Adding info for usb:1-1 usb 1-1: usb_probe_device usb 1-1: configuration #1 chosen from 1 choice usb 1-1: rpm_resume flags 0x4 usb 1-1: rpm_resume returns 1 usb 1-1: adding 1-1:1.0 (config #1, interface 0) PM: Adding info for usb:1-1:1.0 hub 1-1:1.0: usb_probe_interface hub 1-1:1.0: usb_probe_interface - got id usb 1-1: rpm_resume flags 0x4 usb 1-1: rpm_resume returns 1 hub 1-1:1.0: USB hub found hub 1-1:1.0: 6 ports detected PM: Adding info for scsi:target0:0:0 scsi target0:0:0: rpm_resume flags 0x4 scsi target0:0:0: rpm_resume returns 1 scsi 0:0:0:0: rpm_resume flags 0x0 scsi 0:0:0:0: rpm_resume returns -11 scsi 0:0:0:0: rpm_resume flags 0x4 scsi 0:0:0:0: rpm_resume returns 1 PM: Adding info for scsi:0:0:0:0 PM: Adding info for No Bus:0:0:0:0 PM: Adding info for No Bus:0:0:0:0 sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA PM: Adding info for No Bus:0:0:0:0 PM: Adding info for No Bus:8:0 PM: Adding info for No Bus:sda sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sda: sda1 sda2 sda3 sda4 < sda5 sda6 > PM: Adding info for No Bus:sda1 PM: Adding info for No Bus:sda2 PM: Adding info for No Bus:sda3 PM: Adding info for No Bus:sda4 PM: Adding info for No Bus:sda5 PM: Adding info for No Bus:sda6 ehci_hcd 0000:00:1d.0: reset hcs_params 0x200003 dbg=2 cc=0 pcc=0 ordered !ppc ports=3 hub 1-1:1.0: standalone hub ehci_hcd 0000:00:1d.0: reset hcc_params 36881 caching frame 1024 64 bit addr hub 1-1:1.0: individual port power switching hub 1-1:1.0: individual port over-current protection hub 1-1:1.0: Single TT hub 1-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 1-1:1.0: Port indicators are supported hub 1-1:1.0: power on to power good time: 100ms ehci_hcd 0000:00:1d.0: support lpm ehci_hcd 0000:00:1d.0: debug port 2 hub 1-1:1.0: local power source is good hub 1-1:1.0: enabling power on all ports ehci_hcd 0000:00:1d.0: reset command 0080012 (park)=0 ithresh=8 Periodic period=1024 Reset HALT ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported ehci_hcd 0000:00:1d.0: supports USB remote wakeup ehci_hcd 0000:00:1d.0: irq 20, io mem 0xc4505800 sd 0:0:0:0: [sda] Attached SCSI disk ehci_hcd 0000:00:1d.0: reset command 0080002 (park)=0 ithresh=8 period=1024 Reset HALT ehci_hcd 0000:00:1d.0: init command 0010001 (park)=0 ithresh=1 period=1024 RUN PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 usb 1-1: rpm_suspend flags 0xc usb 1-1: rpm_suspend returns -16 hub 1-0:1.0: rpm_suspend flags 0x4 hub 1-0:1.0: rpm_suspend returns 0 ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00 usb usb2: rpm_resume flags 0x0 usb usb2: rpm_resume returns 1 usb usb2: default language 0x0409 usb usb2: udev 1, busnum 2, minor = 128 usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 hub 1-1:1.0: port 3: status 0101 change 0001 hub 1-1:1.0: port 4: status 0101 change 0001 usb usb2: Product: EHCI Host Controller usb usb2: Manufacturer: Linux 2.6.39-rc5 ehci_hcd usb 1-1: link qh256-0001/ffff8801574f1100 start 1 [1/0 us] hub 1-1:1.0: state 7 ports 6 chg 0018 evt 0000 hub 1-1:1.0: rpm_resume flags 0x4 hub 1-1:1.0: rpm_resume returns 1 usb usb2: SerialNumber: 0000:00:1d.0 hub 1-1:1.0: port 3, status 0101, change 0000, 12 Mb/s PM: Adding info for usb:usb2 usb usb2: usb_probe_device usb usb2: configuration #1 chosen from 1 choice usb usb2: rpm_resume flags 0x4 usb usb2: rpm_resume returns 1 usb usb2: adding 2-0:1.0 (config #1, interface 0) PM: Adding info for usb:2-0:1.0 hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id usb usb2: rpm_resume flags 0x4 usb usb2: rpm_resume returns 1 hub 2-0:1.0: USB hub found hub 2-0:1.0: 3 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 20ms hub 2-0:1.0: local power source is good hub 2-0:1.0: trying to enable port power on non-switchable hub PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 usb usb2: rpm_suspend flags 0xc usb usb2: rpm_suspend returns -16 ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver ohci_hcd: block sizes: ed 80 td 96 uhci_hcd: USB Universal Host Controller Interface driver usbcore: registered new interface driver usblp Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. usbcore: registered new interface driver libusual i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 PM: Adding info for platform:i8042 i8042: Detected active multiplexing controller, rev 1.1 serio: i8042 KBD port at 0x60,0x64 irq 1 PM: Adding info for serio:serio0 serio: i8042 AUX0 port at 0x60,0x64 irq 12 serio: i8042 AUX1 port at 0x60,0x64 irq 12 serio: i8042 AUX2 port at 0x60,0x64 irq 12 serio: i8042 AUX3 port at 0x60,0x64 irq 12 PM: Adding info for serio:serio1 PM: Adding info for serio:serio2 PM: Adding info for No Bus:mice PM: Adding info for serio:serio3 PM: Adding info for serio:serio4 PM: Adding info for No Bus:psaux mousedev: PS/2 mouse device common for all mice PM: Adding info for No Bus:event0 PM: Adding info for No Bus:event1 PM: Adding info for No Bus:event2 rtc_cmos 00:06: RTC can wake from S4 ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001803 0 ACK POWER sig=j CSC CONNECT hub 2-0:1.0: port 1: status 0501 change 0001 usb 1-1.3: new full speed USB device number 3 using ehci_hcd atkbd serio0: Failed to enable keyboard on isa0060/serio0 PM: Adding info for No Bus:input3 input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 PM: Adding info for No Bus:event3 atkbd serio0: Spurious ACK on isa0060/serio0. Some program might be trying access hardware directly. PM: Adding info for No Bus:rtc0 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19 usb 1-1.3: rpm_resume flags 0x0 usb 1-1.3: rpm_resume returns 1 PM: Adding info for i2c:i2c-0 lirc_dev: IR Remote Control driver registered, major 252 usb 1-1.3: skipped 1 descriptor after interface usb 1-1.3: default language 0x0409 IR NEC protocol handler initialized IR RC5(x) protocol handler initialized IR RC6 protocol handler initialized IR JVC protocol handler initialized IR Sony protocol handler initialized IR RC5 (streamzap) protocol handler initialized IR LIRC bridge handler initialized Linux video capture interface: v2.00 gspca: v2.12.0 registered PM: Adding info for platform:coretemp.0 coretemp coretemp.0: TjMax is 105 C. PM: Adding info for No Bus:hwmon0 usb 1-1.3: udev 3, busnum 1, minor = 2 usb 1-1.3: New USB device found, idVendor=03f0, idProduct=231d usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1.3: Product: HP Integrated Module usb 1-1.3: Manufacturer: Broadcom Corp PM: Adding info for platform:coretemp.2 PM: Adding info for usb:1-1.3 coretemp coretemp.2: TjMax is 105 C. PM: Adding info for No Bus:hwmon1 usb 1-1.3: usb_probe_device usb 1-1.3: configuration #1 chosen from 1 choice usb 1-1.3: rpm_resume flags 0x4 usb 1-1.3: rpm_resume returns 1 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 PM: Adding info for platform:iTCO_wdt usb 1-1.3: adding 1-1.3:1.0 (config #1, interface 0) PM: Adding info for usb:1-1.3:1.0 iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460) PM: Adding info for No Bus:watchdog PM: Adding info for No Bus:ep_81 iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) iTCO_vendor_support: vendor-support=0 PM: Adding info for No Bus:ep_82 PM: Adding info for No Bus:ep_02 usb 1-1.3: adding 1-1.3:1.1 (config #1, interface 1) PM: Adding info for usb:1-1.3:1.1 PM: Adding info for No Bus:ep_83 PM: Adding info for No Bus:ep_03 usb 1-1.3: adding 1-1.3:1.2 (config #1, interface 2) PM: Adding info for usb:1-1.3:1.2 PM: Adding info for No Bus:ep_84 PM: Adding info for No Bus:ep_04 usb 1-1.3: adding 1-1.3:1.3 (config #1, interface 3) PM: Adding info for usb:1-1.3:1.3 PM: Adding info for No Bus:ep_00 cpuidle: using governor ladder hub 1-1:1.0: port 4, status 0101, change 0000, 12 Mb/s cpuidle: using governor menu usbcore: registered new interface driver usbhid usbhid: USB HID core driver PM: Adding info for No Bus:timer HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 HDA Intel 0000:00:1b.0: setting latency timer to 64 usb 1-1.4: new full speed USB device number 4 using ehci_hcd usb 1-1.4: ep0 maxpacket = 8 usb 1-1.4: rpm_resume flags 0x0 usb 1-1.4: rpm_resume returns 1 usb 1-1.4: default language 0x0409 usb 1-1.4: udev 4, busnum 1, minor = 3 usb 1-1.4: New USB device found, idVendor=138a, idProduct=0005 usb 1-1.4: New USB device strings: Mfr=0, Product=0, SerialNumber=1 usb 1-1.4: SerialNumber: 0510f9f55000 PM: Adding info for usb:1-1.4 usb 1-1.4: usb_probe_device usb 1-1.4: configuration #1 chosen from 1 choice usb 1-1.4: rpm_resume flags 0x4 usb 1-1.4: rpm_resume returns 1 usb 1-1.4: adding 1-1.4:1.0 (config #1, interface 0) PM: Adding info for usb:1-1.4:1.0 PM: Adding info for No Bus:ep_01 PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_82 PM: Adding info for No Bus:ep_00 hub 1-1:1.0: state 7 ports 6 chg 0000 evt 0010 hub 1-1:1.0: rpm_resume flags 0x4 hub 1-1:1.0: rpm_resume returns 1 hub 1-1:1.0: rpm_suspend flags 0x4 hub 1-1:1.0: rpm_suspend returns 0 hub 2-0:1.0: state 7 ports 3 chg 0002 evt 0000 hub 2-0:1.0: rpm_resume flags 0x4 hub 2-0:1.0: rpm_resume returns 1 hub 2-0:1.0: port 1, status 0501, change 0000, 480 Mb/s ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT usb 2-1: new high speed USB device number 2 using ehci_hcd ehci_hcd 0000:00:1d.0: port 1 high speed ehci_hcd 0000:00:1d.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT ehci_hcd 0000:00:1d.0: set dev address 2 for port 1 ehci_hcd 0000:00:1d.0: LPM: no device attached usb 2-1: rpm_resume flags 0x0 usb 2-1: rpm_resume returns 1 usb 2-1: udev 2, busnum 2, minor = 129 usb 2-1: New USB device found, idVendor=8087, idProduct=0020 usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 PM: Adding info for usb:2-1 usb 2-1: usb_probe_device usb 2-1: configuration #1 chosen from 1 choice usb 2-1: rpm_resume flags 0x4 usb 2-1: rpm_resume returns 1 usb 2-1: adding 2-1:1.0 (config #1, interface 0) PM: Adding info for usb:2-1:1.0 hub 2-1:1.0: usb_probe_interface hub 2-1:1.0: usb_probe_interface - got id usb 2-1: rpm_resume flags 0x4 usb 2-1: rpm_resume returns 1 hub 2-1:1.0: USB hub found hub 2-1:1.0: 8 ports detected hub 2-1:1.0: standalone hub hub 2-1:1.0: individual port power switching hub 2-1:1.0: individual port over-current protection hub 2-1:1.0: Single TT hub 2-1:1.0: TT requires at most 8 FS bit times (666 ns) hub 2-1:1.0: Port indicators are supported hub 2-1:1.0: power on to power good time: 100ms hub 2-1:1.0: local power source is good hub 2-1:1.0: enabling power on all ports PM: Adding info for No Bus:ep_81 PM: Adding info for No Bus:ep_00 usb 2-1: rpm_suspend flags 0xc usb 2-1: rpm_suspend returns -16 hub 2-0:1.0: rpm_suspend flags 0x4 hub 2-0:1.0: rpm_suspend returns 0 PM: Adding info for No Bus:input4 input: PS/2 Generic Mouse as /devices/platform/i8042/serio4/input/input4 PM: Adding info for No Bus:mouse0 PM: Adding info for No Bus:event4 hub 2-1:1.0: port 5: status 0101 change 0001 hub 2-1:1.0: port 6: status 0101 change 0001 PM: Adding info for No Bus:card0 PM: Adding info for No Bus:pcmC0D0p PM: Adding info for No Bus:pcmC0D0c PM: Adding info for No Bus:dsp PM: Adding info for No Bus:audio PM: Adding info for No Bus:controlC0 PM: Adding info for No Bus:mixer HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 usb 2-1: link qh256-0001/ffff880156c07800 start 1 [1/0 us] hub 2-1:1.0: state 7 ports 8 chg 0060 evt 0000 hub 2-1:1.0: rpm_resume flags 0x4 hub 2-1:1.0: rpm_resume returns 1 HDA Intel 0000:01:00.1: setting latency timer to 64 hub 2-1:1.0: port 5, status 0101, change 0000, 12 Mb/s PM: Adding info for No Bus:card1 PM: Adding info for No Bus:pcmC1D3p PM: Adding info for No Bus:controlC1 PM: Adding info for No Bus:mixer1 usbcore: registered new interface driver snd-usb-audio ALSA device list: usb 2-1.5: new full speed USB device number 3 using ehci_hcd #0: HDA Intel at 0xc4500000 irq 22 #1: HD-Audio Generic at 0xc4420000 irq 17 IPv4 over IPv4 tunneling driver PM: Adding info for No Bus:tunl0 TCP cubic registered NET: Registered protocol family 17 lib80211: common routines for IEEE802.11 drivers lib80211_crypt: registered algorithm 'NULL' PM: Adding info for No Bus:cpu_dma_latency PM: Adding info for No Bus:network_latency PM: Adding info for No Bus:network_throughput PM: Hibernation image not present or could not be loaded. rtc_cmos 00:06: setting system clock to 2011-05-01 10:50:35 UTC (1304247035) usb 2-1.5: ep0 maxpacket = 8 usb 2-1.5: rpm_resume flags 0x0 usb 2-1.5: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 usb 2-1.5: skipped 1 descriptor after interface usb 2-1.5: skipped 1 descriptor after interface usb 2-1.5: default language 0x0409 usb 2-1.5: udev 3, busnum 2, minor = 130 usb 2-1.5: New USB device found, idVendor=056a, idProduct=00e3 usb 2-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 2-1.5: Product: ISD-V4 usb 2-1.5: Manufacturer: Tablet PM: Adding info for usb:2-1.5 usb 2-1.5: usb_probe_device usb 2-1.5: configuration #1 chosen from 1 choice usb 2-1.5: rpm_resume flags 0x4 usb 2-1.5: rpm_resume returns 1 usb 2-1.5: adding 2-1.5:1.0 (config #1, interface 0) PM: Adding info for usb:2-1.5:1.0 usbhid 2-1.5:1.0: usb_probe_interface usbhid 2-1.5:1.0: usb_probe_interface - got id usb 2-1.5: rpm_resume flags 0x4 usb 2-1.5: rpm_resume returns 1 PM: Adding info for No Bus:ep_81 usb 2-1.5: adding 2-1.5:1.1 (config #1, interface 1) PM: Adding info for usb:2-1.5:1.1 usbhid 2-1.5:1.1: usb_probe_interface usbhid 2-1.5:1.1: usb_probe_interface - got id usb 2-1.5: rpm_resume flags 0x4 usb 2-1.5: rpm_resume returns 1 PM: Adding info for No Bus:ep_82 PM: Adding info for No Bus:ep_00 hub 2-1:1.0: port 6, status 0101, change 0000, 12 Mb/s usb 2-1.6: new high speed USB device number 4 using ehci_hcd usb 2-1.6: rpm_resume flags 0x0 usb 2-1.6: rpm_resume returns 1 usb 2-1.6: skipped 1 descriptor after configuration usb 2-1.6: skipped 6 descriptors after interface usb 2-1.6: skipped 1 descriptor after endpoint usb 2-1.6: skipped 6 descriptors after interface usb 2-1.6: default language 0x0409 usb 2-1.6: udev 4, busnum 2, minor = 131 usb 2-1.6: New USB device found, idVendor=10f1, idProduct=1a16 usb 2-1.6: New USB device strings: Mfr=2, Product=1, SerialNumber=0 EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): mounted filesystem with ordered data mode VFS: Mounted root (ext3 filesystem) readonly on device 8:1. usb 2-1.6: Product: HP Webcam usb 2-1.6: Manufacturer: Importek PM: Adding info for usb:2-1.6 usb 2-1.6: usb_probe_device usb 2-1.6: configuration #1 chosen from 1 choice usb 2-1.6: rpm_resume flags 0x4 usb 2-1.6: rpm_resume returns 1 usb 2-1.6: adding 2-1.6:1.0 (config #1, interface 0) PM: Adding info for usb:2-1.6:1.0 Freeing unused kernel memory: 432k freed PM: Adding info for No Bus:ep_83 usb 2-1.6: adding 2-1.6:1.1 (config #1, interface 1) PM: Adding info for usb:2-1.6:1.1 PM: Adding info for No Bus:ep_00 hub 2-1:1.0: state 7 ports 8 chg 0000 evt 0020 hub 2-1:1.0: rpm_resume flags 0x4 hub 2-1:1.0: rpm_resume returns 1 hub 2-1:1.0: rpm_suspend flags 0x4 hub 2-1:1.0: rpm_suspend returns 0 udev: starting version 151 udevd (1096): /proc/1096/oom_adj is deprecated, please use /proc/1096/oom_score_adj instead. brcmsmac: module is from the staging directory, the quality is unknown, you have been warned. brcmsmac 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 brcmsmac 0000:03:00.0: setting latency timer to 64 PM: Adding info for No Bus:0000:03:00.0 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 wacom 2-1.5:1.0: usb_probe_interface wacom 2-1.5:1.0: usb_probe_interface - got id usb 2-1.5: rpm_resume flags 0x4 usb 2-1.5: rpm_resume returns 1 PM: Adding info for No Bus:input5 input: Wacom ISDv4 E3 Finger as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input5 PM: Adding info for No Bus:mouse1 PM: Adding info for No Bus:event5 wacom 2-1.5:1.0: rpm_suspend flags 0x4 wacom 2-1.5:1.0: rpm_suspend returns 0 wacom 2-1.5:1.1: usb_probe_interface wacom 2-1.5:1.1: usb_probe_interface - got id usb 2-1.5: rpm_resume flags 0x4 usb 2-1.5: rpm_resume returns 1 PM: Adding info for No Bus:input6 input: Wacom ISDv4 E3 Pen as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.1/input/input6 PM: Adding info for No Bus:mouse2 PM: Adding info for No Bus:event6 wacom 2-1.5:1.1: rpm_suspend flags 0x4 wacom 2-1.5:1.1: rpm_suspend returns 0 usbcore: registered new interface driver wacom wacom: v1.52:USB Wacom tablet driver [drm] Initialized drm 1.1.0 20060810 r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded r8169 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 r8169 0000:02:00.0: setting latency timer to 64 r8169 0000:02:00.0: no MSI. Back to INTx. PM: Adding info for No Bus:eth0 r8169 0000:02:00.0: eth0: RTL8168d/8111d at 0xffffc900100ba000, d8:d3:85:39:89:fb, XID 083000c0 IRQ 16 PM: Removing info for No Bus:0000:03:00.0 PM: Adding info for No Bus:0000:03:00.0 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 PM: Removing info for No Bus:0000:03:00.0 PM: Adding info for No Bus:phy0 ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' PM: Adding info for No Bus:wlan0 PM: Adding info for No Bus:ttm sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 [drm] radeon defaulting to kernel modesetting. [drm] radeon kernel modesetting enabled. VGA switcheroo: detected switching method \_SB_.PCI0.GFX0.ATPX handle checking generic (b0000000 1ff0000) vs hw (a0000000 10000000) radeon 0000:01:00.0: enabling device (0000 -> 0003) radeon 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 radeon 0000:01:00.0: setting latency timer to 64 PM: Adding info for No Bus:controlD64 PM: Adding info for No Bus:card0 [drm] initializing kernel modesetting (CEDAR 0x1002:0x68E0). [drm] register mmio base: 0xC4400000 [drm] register mmio size: 131072 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 ATOM BIOS: HP radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used) radeon 0000:01:00.0: GTT: 512M 0x0000000020000000 - 0x000000003FFFFFFF mtrr: no more MTRRs available [drm] Detected VRAM RAM=512M, BAR=256M [drm] RAM width 64bits DDR [TTM] Zone kernel: Available graphics memory: 1925414 kiB. [TTM] Initializing pool allocator. [drm] radeon: 512M of VRAM memory ready [drm] radeon: 512M of GTT memory ready. [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] Driver supports precise vblank timestamp query. [drm] radeon: irq initialized. [drm] GART: num cpu pages 131072, num gpu pages 131072 PM: Adding info for platform:radeon_cp.0 [drm] Loading CEDAR Microcode PM: Adding info for No Bus:radeon_cp.0 PM: Removing info for No Bus:radeon_cp.0 PM: Removing info for platform:radeon_cp.0 r600_cp: Failed to load firmware "radeon/CEDAR_pfp.bin" [drm:evergreen_startup] *ERROR* Failed to load firmware! radeon 0000:01:00.0: disabling GPU acceleration radeon 0000:01:00.0: ffff8801559e4000 unpin not necessary radeon 0000:01:00.0: ffff8801559e4000 unpin not necessary PM: Adding info for i2c:i2c-1 PM: Adding info for i2c:i2c-2 PM: Adding info for i2c:i2c-3 PM: Adding info for i2c:i2c-4 PM: Adding info for i2c:i2c-5 PM: Adding info for i2c:i2c-6 PM: Adding info for i2c:i2c-7 PM: Adding info for i2c:i2c-8 PM: Adding info for No Bus:card0-LVDS-1 PM: Adding info for No Bus:card0-HDMI-A-1 PM: Adding info for No Bus:card0-VGA-1 [drm] Radeon Display Connectors [drm] Connector 0: [drm] LVDS [drm] DDC: 0x6560 0x6560 0x6564 0x6564 0x6568 0x6568 0x656c 0x656c [drm] Encoders: [drm] LCD1: INTERNAL_UNIPHY [drm] Connector 1: [drm] HDMI-A [drm] HPD1 [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [drm] Encoders: [drm] DFP1: INTERNAL_UNIPHY1 [drm] Connector 2: [drm] VGA [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4 [drm] Encoders: [drm] CRT1: INTERNAL_KLDSCP_DAC1 [drm] Internal thermal controller with fan control PM: Adding info for No Bus:hwmon2 [drm] radeon: power management initialized [drm] fb mappable at 0xA0040000 [drm] vram apper at 0xA0000000 [drm] size 4096000 [drm] fb depth is 24 [drm] pitch is 5120 checking generic (b0000000 1ff0000) vs hw (a0000000 10000000) PM: Adding info for No Bus:fb1 fb1: radeondrmfb frame buffer device drm: registered panic notifier [drm] Initialized radeon 2.9.0 20080528 for 0000:01:00.0 on minor 0 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 EXT3-fs (sda1): using internal journal sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda3): using internal journal EXT3-fs (sda3): mounted filesystem with ordered data mode sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda5): using internal journal EXT3-fs (sda5): mounted filesystem with ordered data mode sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 EXT2-fs (sda6): warning: mounting unchecked fs, running e2fsck is recommended PM: Adding info for No Bus:vcs2 PM: Adding info for No Bus:vcsa2 PM: Adding info for No Bus:vcs3 PM: Adding info for No Bus:vcsa3 PM: Adding info for No Bus:vcs4 PM: Adding info for No Bus:vcsa4 PM: Adding info for No Bus:vcs5 PM: Adding info for No Bus:vcsa5 PM: Adding info for No Bus:vcs6 PM: Adding info for No Bus:vcsa6 PM: Adding info for No Bus:vcs7 PM: Adding info for No Bus:vcsa7 PM: Adding info for No Bus:vcs8 PM: Adding info for No Bus:vcsa8 PM: Adding info for No Bus:vcs9 PM: Adding info for No Bus:vcsa9 PM: Adding info for No Bus:vcs10 PM: Adding info for No Bus:vcsa10 PM: Adding info for No Bus:vcs11 PM: Adding info for No Bus:vcsa11 PM: Adding info for No Bus:vcs12 PM: Adding info for No Bus:vcsa12 r8169 0000:02:00.0: rpm_resume flags 0x4 r8169 0000:02:00.0: rpm_resume returns 1 PM: Adding info for No Bus:0000:02:00.0 PM: Removing info for No Bus:0000:02:00.0 r8169 0000:02:00.0: eth0: unable to apply firmware patch r8169 0000:02:00.0: eth0: link down sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 sd 0:0:0:0: rpm_resume flags 0x4 sd 0:0:0:0: rpm_resume returns 1 Adding 4000180k swap on /dev/sda2. Priority:-1 extents:1 across:4000180k wlan0: authenticate with 00:1c:4a:07:7f:76 (try 1) wlan0: authenticated wlan0: associate with 00:1c:4a:07:7f:76 (try 1) wlan0: RX AssocResp from 00:1c:4a:07:7f:76 (capab=0x431 status=0 aid=1) wlan0: associated atkbd serio0: Unknown key pressed (translated set 2, code 0x81 on isa0060/serio0). atkbd serio0: Use 'setkeycodes e001 ' to make it known. pci 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 pci 0000:00:02.0: setting latency timer to 64 PM: Adding info for No Bus:card1 mtrr: no more MTRRs available [drm] MTRR allocation failed. Graphics performance may suffer. PM: Adding info for i2c:i2c-9 PM: Adding info for i2c:i2c-10 PM: Adding info for i2c:i2c-11 PM: Adding info for i2c:i2c-12 PM: Adding info for i2c:i2c-13 PM: Adding info for i2c:i2c-14 PM: Adding info for i2c:i2c-15 PM: Adding info for i2c:i2c-16 [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [drm] No driver support for vblank timestamp query. [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness PM: Adding info for No Bus:acpi_video0 PM: Adding info for No Bus:cooling_device5 acpi device:02: registered as cooling_device5 PM: Adding info for No Bus:input7 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input7 PM: Adding info for No Bus:event7 ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS PM: Adding info for No Bus:acpi_video1 PM: Adding info for No Bus:cooling_device6 acpi device:0b: registered as cooling_device6 PM: Adding info for No Bus:input8 input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:09/LNXVIDEO:01/input/input8 PM: Adding info for No Bus:event8 ACPI: Video Device [PEGP] (multi-head: yes rom: no post: no) [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 1 atkbd serio0: Unknown key pressed (translated set 2, code 0x81 on isa0060/serio0). atkbd serio0: Use 'setkeycodes e001 ' to make it known. atkbd serio0: Unknown key pressed (translated set 2, code 0x81 on isa0060/serio0). atkbd serio0: Use 'setkeycodes e001 ' to make it known. atkbd serio0: Unknown key pressed (translated set 2, code 0x81 on isa0060/serio0). atkbd serio0: Use 'setkeycodes e001 ' to make it known. atkbd serio0: Unknown key pressed (translated set 2, code 0x81 on isa0060/serio0). atkbd serio0: Use 'setkeycodes e001 ' to make it known. --WIyZ46R2i8wDzkSu-- -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/