Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753480Ab1ECQGl (ORCPT ); Tue, 3 May 2011 12:06:41 -0400 Received: from wolverine01.qualcomm.com ([199.106.114.254]:27058 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753364Ab1ECQGj (ORCPT ); Tue, 3 May 2011 12:06:39 -0400 X-IronPort-AV: E=McAfee;i="5400,1158,6334"; a="89252126" From: David Collins To: David Brown , Daniel Walker , Bryan Huntsman Cc: Liam Girdwood , Mark Brown , Samuel Ortiz , linux-kernel@vger.kernel.org, linux-arm-msm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-arm-msm-owner@vger.kernel.org, David Collins Subject: [PATCH v2 2/2] msm: board-8960: Add support for pm8921-regulator Date: Tue, 3 May 2011 09:06:34 -0700 Message-Id: <1304438794-30845-1-git-send-email-collinsd@codeaurora.org> X-Mailer: git-send-email 1.7.3.3 In-Reply-To: <1304438668-23680-1-git-send-email-collinsd@codeaurora.org> References: <1304438668-23680-1-git-send-email-collinsd@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 15455 Lines: 408 Add board-msm8960-regulator.c to contain pm8921-regulator structure declarations. The primary configuration table msm_pm8921_regulator_pdata specifies the following characteristics for each regulator: if it is always on, if it should have its pull down set when disabled, its min and max voltage constraints, and its supply regulator. Signed-off-by: David Collins --- arch/arm/mach-msm/Makefile | 1 + arch/arm/mach-msm/board-msm8960-regulator.c | 306 +++++++++++++++++++++++++++ arch/arm/mach-msm/board-msm8960.c | 4 + arch/arm/mach-msm/board-msm8960.h | 23 ++ 4 files changed, 334 insertions(+), 0 deletions(-) create mode 100644 arch/arm/mach-msm/board-msm8960-regulator.c create mode 100644 arch/arm/mach-msm/board-msm8960.h diff --git a/arch/arm/mach-msm/Makefile b/arch/arm/mach-msm/Makefile index 84d49db..5ee9318 100644 --- a/arch/arm/mach-msm/Makefile +++ b/arch/arm/mach-msm/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_ARCH_MSM7X30) += board-msm7x30.o devices-msm7x30.o obj-$(CONFIG_ARCH_QSD8X50) += board-qsd8x50.o devices-qsd8x50.o obj-$(CONFIG_ARCH_MSM8X60) += board-msm8x60.o devices-msm8x60.o obj-$(CONFIG_ARCH_MSM8960) += board-msm8960.o devices-msm8960.o +obj-$(CONFIG_ARCH_MSM8960) += board-msm8960-regulator.o obj-$(CONFIG_ARCH_MSM7X30) += gpiomux-v1.o gpiomux.o obj-$(CONFIG_ARCH_QSD8X50) += gpiomux-8x50.o gpiomux-v1.o gpiomux.o diff --git a/arch/arm/mach-msm/board-msm8960-regulator.c b/arch/arm/mach-msm/board-msm8960-regulator.c new file mode 100644 index 0000000..08362d8 --- /dev/null +++ b/arch/arm/mach-msm/board-msm8960-regulator.c @@ -0,0 +1,306 @@ +/* + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include + +#include "board-msm8960.h" + +#define PM8921_VREG_CONSUMERS(_id) \ + static struct regulator_consumer_supply \ + pm8921_vreg_consumers_##_id[] __devinitdata + +/* + * Consumer specific regulator names: + * regulator name consumer dev_name + */ +PM8921_VREG_CONSUMERS(L1) = { + REGULATOR_SUPPLY("8921_l1", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L2) = { + REGULATOR_SUPPLY("8921_l2", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L3) = { + REGULATOR_SUPPLY("8921_l3", "reg-debug-consumer"), + REGULATOR_SUPPLY("HSUSB_3p3", "msm_otg"), +}; +PM8921_VREG_CONSUMERS(L4) = { + REGULATOR_SUPPLY("8921_l4", "reg-debug-consumer"), + REGULATOR_SUPPLY("HSUSB_1p8", "msm_otg"), +}; +PM8921_VREG_CONSUMERS(L5) = { + REGULATOR_SUPPLY("8921_l5", "reg-debug-consumer"), + REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.1"), +}; +PM8921_VREG_CONSUMERS(L6) = { + REGULATOR_SUPPLY("8921_l6", "reg-debug-consumer"), + REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.3"), +}; +PM8921_VREG_CONSUMERS(L7) = { + REGULATOR_SUPPLY("8921_l7", "reg-debug-consumer"), + REGULATOR_SUPPLY("sdc_vddp", "msm_sdcc.3"), +}; +PM8921_VREG_CONSUMERS(L8) = { + REGULATOR_SUPPLY("8921_l8", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L9) = { + REGULATOR_SUPPLY("8921_l9", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L10) = { + REGULATOR_SUPPLY("8921_l10", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L11) = { + REGULATOR_SUPPLY("8921_l11", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L12) = { + REGULATOR_SUPPLY("8921_l12", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L14) = { + REGULATOR_SUPPLY("8921_l14", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L15) = { + REGULATOR_SUPPLY("8921_l15", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L16) = { + REGULATOR_SUPPLY("8921_l16", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L17) = { + REGULATOR_SUPPLY("8921_l17", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L18) = { + REGULATOR_SUPPLY("8921_l18", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L21) = { + REGULATOR_SUPPLY("8921_l21", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L22) = { + REGULATOR_SUPPLY("8921_l22", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L23) = { + REGULATOR_SUPPLY("8921_l23", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L24) = { + REGULATOR_SUPPLY("8921_l24", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L25) = { + REGULATOR_SUPPLY("8921_l25", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L26) = { + REGULATOR_SUPPLY("8921_l26", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L27) = { + REGULATOR_SUPPLY("8921_l27", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L28) = { + REGULATOR_SUPPLY("8921_l28", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(L29) = { + REGULATOR_SUPPLY("8921_l29", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(S1) = { + REGULATOR_SUPPLY("8921_s1", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(S2) = { + REGULATOR_SUPPLY("8921_s2", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(S3) = { + REGULATOR_SUPPLY("8921_s3", "reg-debug-consumer"), + REGULATOR_SUPPLY("HSUSB_VDDCX", "msm_otg"), +}; +PM8921_VREG_CONSUMERS(S4) = { + REGULATOR_SUPPLY("8921_s4", "reg-debug-consumer"), + REGULATOR_SUPPLY("sdc_vccq", "msm_sdcc.1"), +}; +PM8921_VREG_CONSUMERS(S5) = { + REGULATOR_SUPPLY("8921_s5", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(S6) = { + REGULATOR_SUPPLY("8921_s6", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(S7) = { + REGULATOR_SUPPLY("8921_s7", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(S8) = { + REGULATOR_SUPPLY("8921_s8", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(LVS1) = { + REGULATOR_SUPPLY("8921_lvs1", "reg-debug-consumer"), + REGULATOR_SUPPLY("sdc_vdd", "msm_sdcc.4"), +}; +PM8921_VREG_CONSUMERS(LVS2) = { + REGULATOR_SUPPLY("8921_lvs2", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(LVS3) = { + REGULATOR_SUPPLY("8921_lvs3", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(LVS4) = { + REGULATOR_SUPPLY("8921_lvs4", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(LVS5) = { + REGULATOR_SUPPLY("8921_lvs5", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(LVS6) = { + REGULATOR_SUPPLY("8921_lvs6", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(LVS7) = { + REGULATOR_SUPPLY("8921_lvs7", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(USB_OTG) = { + REGULATOR_SUPPLY("8921_usb_otg", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(HDMI_MVS) = { + REGULATOR_SUPPLY("8921_hdmi_mvs", "reg-debug-consumer"), +}; +PM8921_VREG_CONSUMERS(NCP) = { + REGULATOR_SUPPLY("8921_ncp", "reg-debug-consumer"), +}; + +#define PM8921_VREG_INIT(_id, _min_uV, _max_uV, _modes, _ops, _apply_uV, \ + _pull_down, _always_on, _supply_regulator) \ + { \ + .init_data = { \ + .constraints = { \ + .valid_modes_mask = _modes, \ + .valid_ops_mask = _ops, \ + .min_uV = _min_uV, \ + .max_uV = _max_uV, \ + .input_uV = _max_uV, \ + .apply_uV = _apply_uV, \ + .always_on = _always_on, \ + }, \ + .num_consumer_supplies = \ + ARRAY_SIZE(pm8921_vreg_consumers_##_id), \ + .consumer_supplies = pm8921_vreg_consumers_##_id, \ + .supply_regulator = _supply_regulator, \ + }, \ + .id = PM8921_VREG_ID_##_id, \ + .pull_down_enable = _pull_down, \ + } + +#define PM8921_VREG_INIT_LDO(_id, _always_on, _pull_down, _min_uV, _max_uV, \ + _supply_regulator) \ + PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \ + | REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \ + REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \ + REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \ + _supply_regulator) + +#define PM8921_VREG_INIT_NLDO1200(_id, _always_on, _pull_down, _min_uV, \ + _max_uV, _supply_regulator) \ + PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \ + | REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \ + REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \ + REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \ + _supply_regulator) + +#define PM8921_VREG_INIT_SMPS(_id, _always_on, _pull_down, _min_uV, _max_uV, \ + _supply_regulator) \ + PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL \ + | REGULATOR_MODE_IDLE, REGULATOR_CHANGE_VOLTAGE | \ + REGULATOR_CHANGE_STATUS | REGULATOR_CHANGE_MODE | \ + REGULATOR_CHANGE_DRMS, 0, _pull_down, _always_on, \ + _supply_regulator) + +#define PM8921_VREG_INIT_FTSMPS(_id, _always_on, _pull_down, _min_uV, _max_uV, \ + _supply_regulator) \ + PM8921_VREG_INIT(_id, _min_uV, _max_uV, REGULATOR_MODE_NORMAL, \ + REGULATOR_CHANGE_VOLTAGE | REGULATOR_CHANGE_STATUS \ + | REGULATOR_CHANGE_MODE, 0, _pull_down, _always_on, \ + _supply_regulator) + +#define PM8921_VREG_INIT_VS(_id, _always_on, _pull_down, _supply_regulator) \ + PM8921_VREG_INIT(_id, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, _pull_down, \ + _always_on, _supply_regulator) + +#define PM8921_VREG_INIT_VS300(_id, _always_on, _pull_down, _supply_regulator) \ + PM8921_VREG_INIT(_id, 0, 0, 0, REGULATOR_CHANGE_STATUS, 0, _pull_down, \ + _always_on, _supply_regulator) + +#define PM8921_VREG_INIT_NCP(_id, _always_on, _min_uV, _max_uV, \ + _supply_regulator) \ + PM8921_VREG_INIT(_id, _min_uV, _max_uV, 0, REGULATOR_CHANGE_VOLTAGE | \ + REGULATOR_CHANGE_STATUS, 0, 0, _always_on, _supply_regulator) + +/* Pin control initialization */ +#define PM8921_PC_INIT(_id, _always_on, _pin_fn, _pin_ctrl, _supply_regulator) \ + { \ + .init_data = { \ + .constraints = { \ + .valid_ops_mask = REGULATOR_CHANGE_STATUS, \ + .always_on = _always_on, \ + }, \ + .num_consumer_supplies = \ + ARRAY_SIZE(pm8921_vreg_consumers_##_id##_PC), \ + .consumer_supplies = pm8921_vreg_consumers_##_id##_PC, \ + .supply_regulator = _supply_regulator, \ + }, \ + .id = PM8921_VREG_ID_##_id##_PC, \ + .pin_fn = PM8921_VREG_PIN_FN_##_pin_fn, \ + .pin_ctrl = _pin_ctrl, \ + } + +/* Regulator constraints */ +struct pm8921_regulator_platform_data +msm_pm8921_regulator_pdata[] __devinitdata = { + /* ID always_on pd min_uV max_uV supply */ + PM8921_VREG_INIT_SMPS(S1, 0, 1, 1225000, 1225000, NULL), + PM8921_VREG_INIT_SMPS(S2, 0, 1, 1300000, 1300000, NULL), + PM8921_VREG_INIT_SMPS(S3, 0, 1, 1050000, 1050000, NULL), + PM8921_VREG_INIT_SMPS(S4, 0, 1, 1800000, 1800000, NULL), + PM8921_VREG_INIT_FTSMPS(S5, 0, 1, 1050000, 1050000, NULL), + PM8921_VREG_INIT_FTSMPS(S6, 0, 1, 1050000, 1050000, NULL), + PM8921_VREG_INIT_SMPS(S7, 0, 1, 1150000, 1150000, NULL), + PM8921_VREG_INIT_SMPS(S8, 0, 1, 2200000, 2200000, NULL), + + PM8921_VREG_INIT_LDO(L1, 0, 1, 1050000, 1050000, "8921_s4"), + PM8921_VREG_INIT_LDO(L2, 0, 1, 1200000, 1200000, "8921_s4"), + PM8921_VREG_INIT_LDO(L3, 0, 1, 3075000, 3075000, NULL), + PM8921_VREG_INIT_LDO(L4, 0, 1, 1800000, 1800000, NULL), + PM8921_VREG_INIT_LDO(L5, 0, 1, 2950000, 2950000, NULL), + PM8921_VREG_INIT_LDO(L6, 0, 1, 2950000, 2950000, NULL), + PM8921_VREG_INIT_LDO(L7, 0, 1, 2950000, 2950000, NULL), + PM8921_VREG_INIT_LDO(L8, 0, 1, 3000000, 3000000, NULL), + PM8921_VREG_INIT_LDO(L9, 0, 1, 2850000, 2850000, NULL), + PM8921_VREG_INIT_LDO(L10, 0, 1, 2900000, 2900000, NULL), + PM8921_VREG_INIT_LDO(L11, 0, 1, 2850000, 2850000, NULL), + PM8921_VREG_INIT_LDO(L12, 0, 1, 1200000, 1200000, "8921_s4"), + PM8921_VREG_INIT_LDO(L14, 0, 1, 1800000, 1800000, NULL), + PM8921_VREG_INIT_LDO(L15, 0, 1, 1800000, 2950000, NULL), + PM8921_VREG_INIT_LDO(L16, 0, 1, 3000000, 3000000, NULL), + PM8921_VREG_INIT_LDO(L17, 0, 1, 1800000, 2950000, NULL), + PM8921_VREG_INIT_LDO(L18, 0, 1, 1300000, 1300000, "8921_s4"), + PM8921_VREG_INIT_LDO(L21, 0, 1, 1900000, 1900000, "8921_s8"), + PM8921_VREG_INIT_LDO(L22, 0, 1, 2750000, 2750000, NULL), + PM8921_VREG_INIT_LDO(L23, 0, 1, 1800000, 1800000, "8921_s8"), + PM8921_VREG_INIT_NLDO1200(L24, 0, 1, 1050000, 1050000, "8921_s1"), + PM8921_VREG_INIT_NLDO1200(L25, 0, 1, 1225000, 1225000, "8921_s1"), + PM8921_VREG_INIT_NLDO1200(L26, 0, 1, 1050000, 1050000, "8921_s7"), + PM8921_VREG_INIT_NLDO1200(L27, 0, 1, 1050000, 1050000, "8921_s7"), + PM8921_VREG_INIT_NLDO1200(L28, 0, 1, 1050000, 1050000, "8921_s7"), + PM8921_VREG_INIT_LDO(L29, 0, 1, 2050000, 2100000, "8921_s8"), + + PM8921_VREG_INIT_VS(LVS1, 0, 1, "8921_s4"), + PM8921_VREG_INIT_VS300(LVS2, 0, 1, "8921_s1"), + PM8921_VREG_INIT_VS(LVS3, 0, 1, "8921_s4"), + PM8921_VREG_INIT_VS(LVS4, 0, 1, "8921_s4"), + PM8921_VREG_INIT_VS(LVS5, 0, 1, "8921_s4"), + PM8921_VREG_INIT_VS(LVS6, 0, 1, "8921_s4"), + PM8921_VREG_INIT_VS(LVS7, 0, 1, "8921_s4"), + + PM8921_VREG_INIT_VS300(USB_OTG, 0, 1, NULL), + PM8921_VREG_INIT_VS300(HDMI_MVS, 0, 1, NULL), + + PM8921_VREG_INIT_NCP(NCP, 0, 1800000, 1800000, "8921_l6"), +}; + +int msm_pm8921_regulator_pdata_len __devinitdata = + ARRAY_SIZE(msm_pm8921_regulator_pdata); diff --git a/arch/arm/mach-msm/board-msm8960.c b/arch/arm/mach-msm/board-msm8960.c index 260b338..d505708 100644 --- a/arch/arm/mach-msm/board-msm8960.c +++ b/arch/arm/mach-msm/board-msm8960.c @@ -34,6 +34,7 @@ #include "devices.h" #include "gpiomux.h" +#include "board-msm8960.h" struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {}; /* Macros assume PMIC GPIOs and MPPs start at 1 */ @@ -102,6 +103,7 @@ static struct pm8921_platform_data pm8921_platform_data __devinitdata = { .irq_pdata = &pm8xxx_irq_pdata, .gpio_pdata = &pm8xxx_gpio_pdata, .mpp_pdata = &pm8xxx_mpp_pdata, + .regulator_pdatas = msm_pm8921_regulator_pdata, }; static struct platform_device *devices[] __initdata = { @@ -122,6 +124,8 @@ static void __init msm8960_init(void) msm8960_device_ssbi_pm8921.dev.platform_data = &msm8960_ssbi_pm8921_pdata; + pm8921_platform_data.num_regulators = msm_pm8921_regulator_pdata_len; + platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-msm/board-msm8960.h b/arch/arm/mach-msm/board-msm8960.h new file mode 100644 index 0000000..040b033 --- /dev/null +++ b/arch/arm/mach-msm/board-msm8960.h @@ -0,0 +1,23 @@ +/* Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __ARCH_ARM_MACH_MSM_BOARD_MSM8960_H +#define __ARCH_ARM_MACH_MSM_BOARD_MSM8960_H + +#include + +extern struct pm8921_regulator_platform_data + msm_pm8921_regulator_pdata[] __devinitdata; + +extern int msm_pm8921_regulator_pdata_len __devinitdata; + +#endif -- Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/