Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754403Ab1ECXhf (ORCPT ); Tue, 3 May 2011 19:37:35 -0400 Received: from relay.pcl-ipout02.plus.net ([212.159.7.100]:12628 "EHLO relay.pcl-ipout02.plus.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753976Ab1ECXhc (ORCPT ); Tue, 3 May 2011 19:37:32 -0400 X-IronPort-Anti-Spam-Filtered: true X-IronPort-Anti-Spam-Result: AqYbAAORwE1UXebr/2dsb2JhbACCNIJfkwaOB3e0egKHQ4kXDoV0BJMyhAyGDA Subject: [PATCH v2] mfd: Add ASIC3 LED support From: "Paul Parsons" To: Cc: , Date: Tue, 03 May 2011 23:37:28 +0000 Content-Type: text/plain Mime-Version: 1.0 X-Mailer: email v2.5.0 (Linux 2.6.38 x86_64 [http://email.cleancode.org]) Message-Id: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11855 Lines: 378 Add LED support for the HTC ASIC3. Underlying support is provided by the mfd/asic3 and leds/leds-asic3 drivers. An example configuration is provided by the pxa/hx4700 platform. Signed-off-by: Paul Parsons --- diff -uprN clean-2.6.39-rc5/drivers/leds/Kconfig linux-2.6.39-rc5/drivers/leds/Kconfig --- clean-2.6.39-rc5/drivers/leds/Kconfig 2011-04-28 11:18:14.818578777 +0100 +++ linux-2.6.39-rc5/drivers/leds/Kconfig 2011-04-30 18:33:53.000000000 +0100 @@ -379,6 +379,16 @@ config LEDS_NETXBIG and 5Big Network v2 boards. The LEDs are wired to a CPLD and are controlled through a GPIO extension bus. +config LEDS_ASIC3 + bool "LED support for the HTC ASIC3" + depends on MFD_ASIC3 + default y + help + This option enables support for the LEDs on the HTC ASIC3. The HTC + ASIC3 LED GPIOs are inputs, not outputs, thus the leds-gpio driver + cannot be used. This driver supports hardware blinking with an on+off + period from 62ms to 125s. Say Y to enable LEDs on the HP iPAQ hx4700. + config LEDS_TRIGGERS bool "LED Trigger support" depends on LEDS_CLASS diff -uprN clean-2.6.39-rc5/drivers/leds/Makefile linux-2.6.39-rc5/drivers/leds/Makefile --- clean-2.6.39-rc5/drivers/leds/Makefile 2011-04-28 11:18:14.818578777 +0100 +++ linux-2.6.39-rc5/drivers/leds/Makefile 2011-04-28 11:27:41.000000000 +0100 @@ -42,6 +42,7 @@ obj-$(CONFIG_LEDS_DELL_NETBOOKS) += dell obj-$(CONFIG_LEDS_MC13783) += leds-mc13783.o obj-$(CONFIG_LEDS_NS2) += leds-ns2.o obj-$(CONFIG_LEDS_NETXBIG) += leds-netxbig.o +obj-$(CONFIG_LEDS_ASIC3) += leds-asic3.o # LED SPI Drivers obj-$(CONFIG_LEDS_DAC124S085) += leds-dac124s085.o diff -uprN clean-2.6.39-rc5/drivers/leds/leds-asic3.c linux-2.6.39-rc5/drivers/leds/leds-asic3.c --- clean-2.6.39-rc5/drivers/leds/leds-asic3.c 1970-01-01 01:00:00.000000000 +0100 +++ linux-2.6.39-rc5/drivers/leds/leds-asic3.c 2011-05-03 21:19:44.000000000 +0100 @@ -0,0 +1,177 @@ +/* + * Copyright (C) 2011 Paul Parsons + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include +#include +#include +#include +#include + +#include +#include + +/* + * The HTC ASIC3 LED GPIOs are inputs, not outputs. + * Hence we turn the LEDs on/off via the TimeBase register. + */ + +/* + * When TimeBase is 4 the clock resolution is about 32Hz. + * This driver supports hardware blinking with an on+off + * period from 62ms (2 clocks) to 125s (4000 clocks). + */ +#define MS_TO_CLK(ms) DIV_ROUND_CLOSEST(((ms)*1024), 32000) +#define CLK_TO_MS(clk) (((clk)*32000)/1024) +#define MAX_CLK 4000 /* Fits into 12-bit Time registers */ +#define MAX_MS CLK_TO_MS(MAX_CLK) + +static const unsigned int led_n_base[ASIC3_NUM_LEDS] = { + [0] = ASIC3_LED_0_Base, + [1] = ASIC3_LED_1_Base, + [2] = ASIC3_LED_2_Base, +}; + +static void brightness_set(struct led_classdev *cdev, + enum led_brightness value) +{ + struct platform_device *pdev = to_platform_device(cdev->dev->parent); + const struct mfd_cell *cell = mfd_get_cell(pdev); + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + u32 timebase; + unsigned int base; + + timebase = (value == LED_OFF) ? 0 : (LED_EN|0x4); + + base = led_n_base[cell->id]; + asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), 32); + asic3_write_register(asic, (base + ASIC3_LED_DutyTime), 32); + asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0); + asic3_write_register(asic, (base + ASIC3_LED_TimeBase), timebase); +} + +static int blink_set(struct led_classdev *cdev, + unsigned long *delay_on, + unsigned long *delay_off) +{ + struct platform_device *pdev = to_platform_device(cdev->dev->parent); + const struct mfd_cell *cell = mfd_get_cell(pdev); + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + u32 on; + u32 off; + unsigned int base; + + if (*delay_on > MAX_MS || *delay_off > MAX_MS) + return -EINVAL; + + if (*delay_on == 0 && *delay_off == 0) { + /* If both are zero then a sensible default should be chosen */ + on = MS_TO_CLK(500); + off = MS_TO_CLK(500); + } else { + on = MS_TO_CLK(*delay_on); + off = MS_TO_CLK(*delay_off); + if ((on + off) > MAX_CLK) + return -EINVAL; + } + + base = led_n_base[cell->id]; + asic3_write_register(asic, (base + ASIC3_LED_PeriodTime), (on + off)); + asic3_write_register(asic, (base + ASIC3_LED_DutyTime), on); + asic3_write_register(asic, (base + ASIC3_LED_AutoStopCount), 0); + asic3_write_register(asic, (base + ASIC3_LED_TimeBase), (LED_EN|0x4)); + + *delay_on = CLK_TO_MS(on); + *delay_off = CLK_TO_MS(off); + + return 0; +} + +static int __devinit asic3_led_probe(struct platform_device *pdev) +{ + const struct mfd_cell *cell = mfd_get_cell(pdev); + struct asic3_platform_data *pdata = pdev->dev.parent->platform_data; + struct asic3_led *led; + int ret; + + if (!pdata->leds) { + ret = -EINVAL; + goto ret0; + } + led = &pdata->leds[cell->id]; + + ret = mfd_cell_enable(pdev); + if (ret < 0) + goto ret0; + + led->cdev = kzalloc(sizeof(struct led_classdev), GFP_KERNEL); + if (!led->cdev) { + ret = -ENOMEM; + goto ret1; + } + + led->cdev->name = led->name; + led->cdev->default_trigger = led->default_trigger; + led->cdev->brightness_set = brightness_set; + led->cdev->blink_set = blink_set; + + ret = led_classdev_register(&pdev->dev, led->cdev); + if (ret < 0) + goto ret2; + + return 0; + +ret2: + kfree(led->cdev); +ret1: + (void) mfd_cell_disable(pdev); +ret0: + return ret; +} + +static int __devexit asic3_led_remove(struct platform_device *pdev) +{ + const struct mfd_cell *cell = mfd_get_cell(pdev); + struct asic3_platform_data *pdata = pdev->dev.parent->platform_data; + struct asic3_led *led; + + led = &pdata->leds[cell->id]; + + led_classdev_unregister(led->cdev); + + kfree(led->cdev); + + return mfd_cell_disable(pdev); +} + +static struct platform_driver asic3_led_driver = { + .probe = asic3_led_probe, + .remove = __devexit_p(asic3_led_remove), + .driver = { + .name = "leds-asic3", + .owner = THIS_MODULE, + }, +}; + +MODULE_ALIAS("platform:leds-asic3"); + +static int __init asic3_led_init(void) +{ + return platform_driver_register(&asic3_led_driver); +} + +static void __exit asic3_led_exit(void) +{ + platform_driver_unregister(&asic3_led_driver); +} + +module_init(asic3_led_init); +module_exit(asic3_led_exit); + +MODULE_AUTHOR("Paul Parsons "); +MODULE_DESCRIPTION("HTC ASIC3 LED driver"); +MODULE_LICENSE("GPL"); diff -uprN clean-2.6.39-rc5/drivers/mfd/asic3.c linux-2.6.39-rc5/drivers/mfd/asic3.c --- clean-2.6.39-rc5/drivers/mfd/asic3.c 2011-04-28 11:18:15.622582797 +0100 +++ linux-2.6.39-rc5/drivers/mfd/asic3.c 2011-05-03 17:58:45.000000000 +0100 @@ -88,19 +88,19 @@ struct asic3 { static int asic3_gpio_get(struct gpio_chip *chip, unsigned offset); -static inline void asic3_write_register(struct asic3 *asic, - unsigned int reg, u32 value) +void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 value) { iowrite16(value, asic->mapping + (reg >> asic->bus_shift)); } +EXPORT_SYMBOL_GPL(asic3_write_register); -static inline u32 asic3_read_register(struct asic3 *asic, - unsigned int reg) +u32 asic3_read_register(struct asic3 *asic, unsigned int reg) { return ioread16(asic->mapping + (reg >> asic->bus_shift)); } +EXPORT_SYMBOL_GPL(asic3_read_register); static void asic3_set_register(struct asic3 *asic, u32 reg, u32 bits, bool set) { @@ -782,6 +780,53 @@ static struct mfd_cell asic3_cell_mmc = .resources = asic3_mmc_resources, }; +static const int clock_ledn[ASIC3_NUM_LEDS] = { + [0] = ASIC3_CLOCK_LED0, + [1] = ASIC3_CLOCK_LED1, + [2] = ASIC3_CLOCK_LED2, +}; + +static int asic3_leds_enable(struct platform_device *pdev) +{ + const struct mfd_cell *cell = mfd_get_cell(pdev); + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + + asic3_clk_enable(asic, &asic->clocks[clock_ledn[cell->id]]); + + return 0; +} + +static int asic3_leds_disable(struct platform_device *pdev) +{ + const struct mfd_cell *cell = mfd_get_cell(pdev); + struct asic3 *asic = dev_get_drvdata(pdev->dev.parent); + + asic3_clk_disable(asic, &asic->clocks[clock_ledn[cell->id]]); + + return 0; +} + +static struct mfd_cell asic3_cell_leds[ASIC3_NUM_LEDS] = { + [0] = { + .name = "leds-asic3", + .id = 0, + .enable = asic3_leds_enable, + .disable = asic3_leds_disable, + }, + [1] = { + .name = "leds-asic3", + .id = 1, + .enable = asic3_leds_enable, + .disable = asic3_leds_disable, + }, + [2] = { + .name = "leds-asic3", + .id = 2, + .enable = asic3_leds_enable, + .disable = asic3_leds_disable, + }, +}; + static int __init asic3_mfd_probe(struct platform_device *pdev, struct resource *mem) { @@ -820,9 +865,15 @@ static int __init asic3_mfd_probe(struct if (ret < 0) goto out; - if (mem_sdio && (irq >= 0)) + if (mem_sdio && (irq >= 0)) { ret = mfd_add_devices(&pdev->dev, pdev->id, &asic3_cell_mmc, 1, mem_sdio, irq); + if (ret < 0) + goto out; + } + + ret = mfd_add_devices(&pdev->dev, 0, + asic3_cell_leds, ASIC3_NUM_LEDS, NULL, 0); out: return ret; diff -uprN clean-2.6.39-rc5/include/linux/mfd/asic3.h linux-2.6.39-rc5/include/linux/mfd/asic3.h --- clean-2.6.39-rc5/include/linux/mfd/asic3.h 2011-03-15 01:20:32.000000000 +0000 +++ linux-2.6.39-rc5/include/linux/mfd/asic3.h 2011-05-03 17:06:23.000000000 +0100 @@ -16,6 +16,13 @@ #include +struct led_classdev; +struct asic3_led { + const char *name; + const char *default_trigger; + struct led_classdev *cdev; +}; + struct asic3_platform_data { u16 *gpio_config; unsigned int gpio_config_num; @@ -23,6 +30,8 @@ struct asic3_platform_data { unsigned int irq_base; unsigned int gpio_base; + + struct asic3_led *leds; }; #define ASIC3_NUM_GPIO_BANKS 4 @@ -111,9 +120,9 @@ struct asic3_platform_data { #define ASIC3_GPIOA11_PWM0 ASIC3_CONFIG_GPIO(11, 1, 1, 0) #define ASIC3_GPIOA12_PWM1 ASIC3_CONFIG_GPIO(12, 1, 1, 0) #define ASIC3_GPIOA15_CONTROL_CX ASIC3_CONFIG_GPIO(15, 1, 1, 0) -#define ASIC3_GPIOC0_LED0 ASIC3_CONFIG_GPIO(32, 1, 1, 0) -#define ASIC3_GPIOC1_LED1 ASIC3_CONFIG_GPIO(33, 1, 1, 0) -#define ASIC3_GPIOC2_LED2 ASIC3_CONFIG_GPIO(34, 1, 1, 0) +#define ASIC3_GPIOC0_LED0 ASIC3_CONFIG_GPIO(32, 1, 0, 0) +#define ASIC3_GPIOC1_LED1 ASIC3_CONFIG_GPIO(33, 1, 0, 0) +#define ASIC3_GPIOC2_LED2 ASIC3_CONFIG_GPIO(34, 1, 0, 0) #define ASIC3_GPIOC3_SPI_RXD ASIC3_CONFIG_GPIO(35, 1, 0, 0) #define ASIC3_GPIOC4_CF_nCD ASIC3_CONFIG_GPIO(36, 1, 0, 0) #define ASIC3_GPIOC4_SPI_TXD ASIC3_CONFIG_GPIO(36, 1, 1, 0) @@ -152,6 +161,7 @@ struct asic3_platform_data { #define PWM_TIMEBASE_VALUE(x) ((x)&0xf) /* Low 4 bits sets time base */ #define PWM_TIMEBASE_ENABLE (1 << 4) /* Enable clock */ +#define ASIC3_NUM_LEDS 3 #define ASIC3_LED_0_Base 0x0700 #define ASIC3_LED_1_Base 0x0800 #define ASIC3_LED_2_Base 0x0900 @@ -293,4 +303,10 @@ struct asic3_platform_data { #define ASIC3_MAP_SIZE_32BIT 0x2000 #define ASIC3_MAP_SIZE_16BIT 0x1000 +/* Functions needed by leds-asic3 */ + +struct asic3; +extern void asic3_write_register(struct asic3 *asic, unsigned int reg, u32 val); +extern u32 asic3_read_register(struct asic3 *asic, unsigned int reg); + #endif /* __ASIC3_H__ */ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/