Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754570Ab1EHO77 (ORCPT ); Sun, 8 May 2011 10:59:59 -0400 Received: from mail-qy0-f174.google.com ([209.85.216.174]:48331 "EHLO mail-qy0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753194Ab1EHO74 convert rfc822-to-8bit (ORCPT ); Sun, 8 May 2011 10:59:56 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=mime-version:in-reply-to:references:date:message-id:subject:from:to :cc:content-type:content-transfer-encoding; b=sShx+FbTZJK41+ZX4IbX1sBGJmMWkpLY29BMaNnuNGtAyXJT2AgoNgCs2dnuVHAQPC hC2yaBSMomDsJiZjWGb1fX+SlnTdhUmGep3H24tH5ipBX4NDSgR0ifdqNsvPkOmhTlio kXol1kieV5a8piofb6W6drEhl5x2s8+6vPJeQ= MIME-Version: 1.0 In-Reply-To: <201105081647.22091.arnd@arndb.de> References: <1304632783-8781-1-git-send-email-zajec5@gmail.com> <201105061605.31625.arnd@arndb.de> <201105081647.22091.arnd@arndb.de> Date: Sun, 8 May 2011 16:59:55 +0200 Message-ID: Subject: Re: [PATCH][WAS:bcmai,axi] bcma: add Broadcom specific AMBA bus driver From: =?UTF-8?B?UmFmYcWCIE1pxYJlY2tp?= To: Arnd Bergmann Cc: linux-wireless@vger.kernel.org, "John W. Linville" , b43-dev@lists.infradead.org, Greg KH , =?UTF-8?Q?Michael_B=C3=BCsch?= , Larry Finger , George Kashperko , Arend van Spriel , linux-arm-kernel@lists.infradead.org, Russell King , Andy Botting , linuxdriverproject , "linux-kernel@vger.kernel.org" Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8BIT Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7053 Lines: 188 2011/5/8 Arnd Bergmann : > On Friday 06 May 2011 16:50:30 Rafał Miłecki wrote: >> 2011/5/6 Arnd Bergmann : > >> > This really needs a changelog. You've probably written all of >> > it before, just explain above the Cc what bcma is, where it's >> > used, why you use a bus_type. This will be the place where >> > people look when they want to find out what it is, so try >> > to make a good description. >> >> What do you mean by changelog? Is README unsufficient? It contains >> almost everything you mentioned... > > The changelog is the text at the start of the email, which is > what 'git log' shows you after the patch gets applied. By changelog I understood differences between V1, V2, ..., V6. I read "above the Cc" as "to above Cc". I thought you want me to explain ppl from Cc what BCMA is. >> > This would be a good start for the changelog. You don't actually need the >> > readme in the code directory, it's better to put the information somewhere >> > in the Documentation/ directory. >> >> I guess Documentation/ can be a good idea, but I'd like to make it >> later if nobody really minds. It's no fun to post more and more >> versions of patches, just to update some single description. > > Having the text in Documentation/ is optional except for user > interfaces, but generally considered a good idea. The changelog > in the email text is not optional. > >> >> diff --git a/drivers/bcma/TODO b/drivers/bcma/TODO >> >> new file mode 100644 >> >> index 0000000..45eadc9 >> >> --- /dev/null >> >> +++ b/drivers/bcma/TODO >> >> @@ -0,0 +1,3 @@ >> >> +- Interrupts >> >> +- Defines for PCI core driver >> >> +- Convert bcma_bus->cores into linked list >> > >> > The last item doesn't make sense to me. Since you are using the regular >> > driver model, you can simply iterate over all child devices of any >> > dev. >> >> It's about optimization. Right now bcma_bus->cores is static array, we >> probably never will use all entries. > > Oh, I see. You should probably have neither of them. Instead allocate > the devices dynamically as you find them and do a device_register, > which will add the device into linked list. As I said, and wrote: TODO. >> > I don't know if we discussed this before. Normally, you should not need such >> > udelay() calls, at least if you have the correct I/O barriers in place. >> >> I believe we didn't. >> >> We had to use such a delays in ssb to let devices react to the >> changes. Did you maybe have a talk with hardware guys at Broadcom >> about this? Are you sure this is not needed for BCMA? > > Normally what you should have is a register which you can poll > to find out of the device is ready. In some cases the mmio read > gets stalled until the hardware is done, in other cases, you have > to do repeated reads until a register goes from 1 to 0 or the > opposite. I would be surprised if BCMA didn't have this, but > it's possible. > >> >> +#include "bcma_private.h" >> >> +#include >> >> + >> >> +MODULE_DESCRIPTION("Broadcom's specific AMBA driver"); >> >> +MODULE_LICENSE("GPL"); >> >> + >> >> +static int bcma_bus_match(struct device *dev, struct device_driver *drv); >> >> +static int bcma_device_probe(struct device *dev); >> >> +static int bcma_device_remove(struct device *dev); >> > >> > Try to reorder your functions so you don't need any forward declarations. >> >> That's needed because I put bus-closely-related stuff at the >> beginning. I did this for readability, I don't think it really hurts >> anyone or is against coding style or sth. > > When I'm reading a source file, I usually start at the end > because that is where the important stuff gets registered to > other subsystems. It's really confusing when one source file > does it in a different order. > > Further, it's not obvious that the code is recursion free if > you have forward declarations in the beginning. > >> >> +const char *bcma_device_name(u16 coreid) >> >> +{ >> >> +     switch (coreid) { >> >> +     case BCMA_CORE_OOB_ROUTER: >> >> +             return "OOB Router"; >> >> +     case BCMA_CORE_INVALID: >> >> +             return "Invalid"; >> >> +     case BCMA_CORE_CHIPCOMMON: >> >> +             return "ChipCommon"; >> >> +     case BCMA_CORE_ILINE20: >> >> +             return "ILine 20"; >> > >> > It's better to make that a data structure than a switch() statement, >> > both from readability and efficiency aspects. >> >> Well, maybe. We call it only once, at init time. In any case we're >> still waiting for Broadcom to clarify which cores are really used for >> BCMA. > > Readability is really what counts here. With efficiency, I mostly > referred to code size, not execution time. As a general rule, use > data structures instead of code where they are equivalent. > >> >> +/* 1) It is not allowed to put struct device statically in bcma_device >> >> + * 2) We can not just use pointer to struct device because we use container_of >> >> + * 3) We do not have pointer to struct bcma_device in struct device >> >> + * Solution: use such a dummy wrapper >> >> + */ >> >> +struct __bcma_dev_wrapper { >> >> +     struct device dev; >> >> +     struct bcma_device *core; >> >> +}; >> >> + >> >> +struct bcma_device { >> >> +     struct bcma_bus *bus; >> >> +     struct bcma_device_id id; >> >> + >> >> +     struct device *dev; >> >> + >> >> +     u8 core_index; >> >> + >> >> +     u32 addr; >> >> +     u32 wrap; >> >> + >> >> +     void *drvdata; >> >> +}; >> > >> > Something went wrong here, maybe you misunderstood the API, or I >> > misunderstood what you are trying to do. When you define your own bus >> > type, the private device (struct bcma_device) should definitely contain >> > a struct device as a member, and you allocate that structure dynamically >> > when probing the bus. I don't see any reason for that wrapper. >> >> Having "stuct device" in my "struct bcma_device" let me walk from >> bcma_device to device. Not the opposite. In case of: >> manuf_show >> id_show >> rev_show >> class_show >> I've to go this opposite way. I've "stuct device" but I need to get >> corresponding "struct bcma_device". > > Maybe you didn't understand what I said: This should be > > struct bcma_device { >     struct bcma_bus *bus; >     struct bcma_device_id id; >     struct device dev; >     u8 core_index; > >     u32 addr; >     u32 wrap; > >     void *drvdata; > }; > > Here, bcma_device is the device, no need to follow pointers > around. It's how all bus_types work, you should just do the same. We can not use static "struct device", see Greg's comments in: [RFC][PATCH V3] axi: add AXI bus driver (not to mention we would have unused "struct device" in ChipCommon's and PCI's "struct bcma_device"). -- Rafał -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/