Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755021Ab1EKTdP (ORCPT ); Wed, 11 May 2011 15:33:15 -0400 Received: from mail-ew0-f46.google.com ([209.85.215.46]:43139 "EHLO mail-ew0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754362Ab1EKTdO convert rfc822-to-8bit (ORCPT ); Wed, 11 May 2011 15:33:14 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:reply-to:to:subject:date:user-agent:cc:references:in-reply-to :mime-version:content-type:content-transfer-encoding:message-id; b=bIJHcsD8u8AV7SgpQr7KtxyymrfMUH/erDZw/YjcZyChzv+1KRxdcmF/AxEcVzMGRj o+PBCLePxVmKktuR7L8SUHNKy5JMA4jM3iBieRRPLMALYexl73xyH+HgBBMSKUK7WsDa WldhueCSbHn+4U9L5yvQ1f06DpkhkgPny50PM= From: Maciej Rutecki Reply-To: maciej.rutecki@gmail.com To: Tino Keitel Subject: Re: 2.6.39-rc6: SATA hangs for a few seconds during boot Date: Wed, 11 May 2011 21:33:08 +0200 User-Agent: KMail/1.13.5 (Linux/2.6.39-rc6; KDE/4.4.5; i686; ; ) Cc: linux-kernel@vger.kernel.org, linux-ide@vger.kernel.org References: <20110509204801.GA2258@x61.home> In-Reply-To: <20110509204801.GA2258@x61.home> MIME-Version: 1.0 Content-Type: Text/Plain; charset="utf-8" Content-Transfer-Encoding: 8BIT Message-Id: <201105112133.09261.maciej.rutecki@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2185 Lines: 53 I created a Bugzilla entry at https://bugzilla.kernel.org/show_bug.cgi?id=34952 for your bug report, please add your address to the CC list in there, thanks! On poniedziałek, 9 maja 2011 o 22:48:01 Tino Keitel wrote: > Hi, > > I get a hanging SATA port for a few seconds during boot, with these > kernel messages: > > ata1.00: exception Emask 0x0 SAct 0x3 SErr 0x40000 action 0x6 frozen > ata1.00: cmd 60/20:00:55:e1:65/00:00:00:00:00/40 tag 0 ncq 16384 in > res 40/00:01:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > ata1.00: cmd 60/02:08:c1:5c:03/00:00:00:00:00/40 tag 1 ncq 1024 in > res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout) > ata1: hard resetting link > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: both IDENTIFYs aborted, assuming NODEV > ata1.00: revalidation failed (errno=-2) > ata1: hard resetting link > ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out > ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded > ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out > ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded > ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out > ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded > ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out > ata1.00: configured for UDMA/133 > ata1.00: device reported invalid CHS sector 0 > ata1.00: device reported invalid CHS sector 0 > ata1: EH complete > > This happens with 2.6.39-rc6 with TuxOnIce patch included, but during boot > without any suspend actions. The hardware is a ThinkPad X61s: > > 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) > SATA AHCI Controller (rev 03) > > Complete dmesg is attached. > > Regards, > Tino -- Maciej Rutecki http://www.maciek.unixy.pl -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/