Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756817Ab1ELMFQ (ORCPT ); Thu, 12 May 2011 08:05:16 -0400 Received: from mail-bw0-f46.google.com ([209.85.214.46]:36316 "EHLO mail-bw0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756549Ab1ELMFO (ORCPT ); Thu, 12 May 2011 08:05:14 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=message-id:date:from:reply-to:user-agent:mime-version:to:cc:subject :references:in-reply-to:content-type:content-transfer-encoding; b=W9C7IHfvY7KSUAAh6KhhY3dxP/qTj+dOs3et8j10BrnZroxKqgEPlHVCtCAOaRuOBx h00Qnkkk6HaUv6VJ+e8yKVDcB58LQemXoMmVZFtue+4MCUmb5e8KOQjWZzAGFwXNAsf7 OMYqdQsff8+ojxLeu8vYBXRZiBE7gAVXU3PiQ= Message-ID: <4DCBCCF5.5040501@gmail.com> Date: Thu, 12 May 2011 16:05:09 +0400 From: Igor Plyatov Reply-To: plyatov@gmail.com User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.2.17) Gecko/20110424 Thunderbird/3.1.10 MIME-Version: 1.0 To: Jeff Garzik CC: linux-ide@vger.kernel.org, linux-kernel@vger.kernel.org, stf_xl@wp.pl Subject: Re: [PATCH] ATA: pata_at91.c bugfixes References: <1303299877-12088-1-git-send-email-plyatov@gmail.com> <4DB4433A.5000609@pobox.com> In-Reply-To: <4DB4433A.5000609@pobox.com> Content-Type: text/plain; charset=ISO-8859-1; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1722 Lines: 50 Hi Jeff! > On 04/20/2011 07:44 AM, Igor Plyatov wrote: >> * Fix "initial_timing" structure initialisation. The "struct >> ata_timing" must >> contain 10 members, but ".dmack_hold" member was not initialised. >> * The AT91SAM9 microcontrollers use special coding scheme for SMC_SETUP, >> SMC_PULSE, SMC_CYCLE registers. >> Old driver operates correctly only with low master clock values, but >> with high master clock it incorrectly calculates SMC values and stops >> to operate, because SMC can be setup only to admissible ranges in >> special >> format. >> New code correctly calculates SMC registers values, adjusts >> calculated >> to admissible ranges, enlarges cycles if required and converts values >> into SMC's format. >> * Old driver calculates CS_SETUP and CS_PULSE cycles incorrectly >> because of wrong assumptions. >> New code calculates: >> CS_SETUP = SETUP/2 >> CS_PULSE = PULSE + SETUP/2 + HOLD/2 >> * This fixes allows to correctly operate with any master clock >> frequency. >> >> Signed-off-by: Igor Plyatov >> --- >> drivers/ata/pata_at91.c | 223 >> ++++++++++++++++++++++++++++++++--------------- >> 1 files changed, 154 insertions(+), 69 deletions(-) > > FYI, the two previous "v4" patches are now applied. > > Based on the comments from Stanislaw, this patch would need to be > updated anyway. Thank you for info! I will update this patch. Best regards! -- Igor Plyatov -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/