Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933467Ab1ERSbV (ORCPT ); Wed, 18 May 2011 14:31:21 -0400 Received: from mail4.comsite.net ([205.238.176.238]:28381 "EHLO mail4.comsite.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933389Ab1ERSbS (ORCPT ); Wed, 18 May 2011 14:31:18 -0400 X-Default-Received-SPF: pass (skip=forwardok (res=PASS)) x-ip-name=71.22.127.106; From: Milton Miller To: Hitoshi Mitake , Sam Ravnborg , Ingo Molnar , Ingo Molnar , "Desai, Kashyap" , "Prakash, Sathya" CC: James Bottomley , Matthew Wilcox , Benjamin Herrenschmidt , linux scsi dev , "paulus@samba.org" , linux powerpc dev , linux pci , linux kernel , linux-arch Subject: RE: [PATCH 1/3] mpt2sas: remove the use of writeq, since writeq is not atomic References: <20110504115324.GE17855@lsi.com> <1305616571.6008.23.camel@mulgrave.site> <20110518041551.GL15227@parisc-linux.org> <1305692584.2580.3.camel@mulgrave.site> <1305702010.2781.33.camel@pasglop> <4565AEA676113A449269C2F3A549520F80B66280@cosmail03.lsi.com> In-Reply-To: <4565AEA676113A449269C2F3A549520F80B66280@cosmail03.lsi.com> Message-ID: X-To-Not-Matched: true Date: Wed, 18 May 2011 13:31:17 -0500 X-Originating-IP: 71.22.127.106 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7842 Lines: 178 On Wed, 18 May 2011 about 09:35:56 -0600, Eric Moore wrote: > On Wednesday, May 18, 2011 2:24 AM, Milton Miller wrote: > > On Wed, 18 May 2011 around 17:00:10 +1000, Benjamin Herrenschmidt wrote: > > > (Just adding Milton to the CC list, he suspects races in the > > > driver instead). > > > > > > On Wed, 2011-05-18 at 08:23 +0400, James Bottomley wrote: > > > > On Tue, 2011-05-17 at 22:15 -0600, Matthew Wilcox wrote: > > > > > On Wed, May 18, 2011 at 09:37:08AM +0530, Desai, Kashyap wrote: > > > > > > On Wed, 2011-05-04 at 17:23 +0530, Kashyap, Desai wrote: > > > > > > > The following code seems to be there in > > /usr/src/linux/arch/x86/include/asm/io.h. > > > > > > > This is not going to work. > > > > > > > > > > > > > > static inline void writeq(__u64 val, volatile void __iomem *addr) > > > > > > > { > > > > > > > writel(val, addr); > > > > > > > writel(val >> 32, addr+4); > > > > > > > } > > > > > > > > > > > > > > So with this code turned on in the kernel, there is going to be > > race condition > > > > > > > where multiple cpus can be writing to the request descriptor at > > the same time. > > > > > > > > > > > > > > Meaning this could happen: > > > > > > > (A) CPU A doest 32bit write > > > > > > > (B) CPU B does 32 bit write > > > > > > > (C) CPU A does 32 bit write > > > > > > > (D) CPU B does 32 bit write > > > > > > > > > > > > > > We need the 64 bit completed in one access pci memory write, else > > spin lock is required. > > > > > > > Since it's going to be difficult to know which writeq was > > implemented in the kernel, > > > > > > > the driver is going to have to always acquire a spin lock each > > time we do 64bit write. > > > > > > > > > > > > > > Cc: stable@kernle.org > > > > > > > Signed-off-by: Kashyap Desai > > > > > > > --- > > > > > > > diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c > > b/drivers/scsi/mpt2sas/mpt2sas_base.c > > > > > > > index efa0255..5778334 100644 > > > > > > > --- a/drivers/scsi/mpt2sas/mpt2sas_base.c > > > > > > > +++ b/drivers/scsi/mpt2sas/mpt2sas_base.c > > > > > > > @@ -1558,7 +1558,6 @@ mpt2sas_base_free_smid(struct > > MPT2SAS_ADAPTER *ioc, u16 smid) > > > > > > > * care of 32 bit environment where its not quarenteed to send > > the entire word > > > > > > > * in one transfer. > > > > > > > */ > > > > > > > -#ifndef writeq > > > > > > > > > > > > Why not make this #ifndef CONFIG_64BIT? You know that all 64 bit > > > > > > systems have writeq implemented correctly; you suspect 32 bit > > systems > > > > > > don't. > > > > > > > > > > > > James > > > > > > > > > > > > James, This issue was observed on PPC64 system. So what you have > > suggested will not solve this issue. > > > > > > If we are sure that writeq() is atomic across all architecture, we > > can use it safely. As we have seen issue on ppc64, we are not confident to > > use > > > > > > "writeq" call. > > > > > > > > > > So have you told the powerpc people that they have a broken writeq? > > > > > > > > I'm just in the process of finding them now on IRC so I can demand an > > > > explanation: this is a really serious API problem because writeq is > > > > supposed to be atomic on 64 bit. > > > > > > > > > And why do you obfuscate your report by talking about i386 when it's > > > > > really about powerpc64? > > > > > > > > James > > > > I checked the assembly for my complied output and it ends up with > > a single std (store doubleword aka 64 bits) instruction with offset > > 192 decimal (0xc0) from the base register obtained from the structure. > > > > An aligned doubleword store is atomic on 64 bit powerpc. > > > > So I would really like more details if you are blaming 64 bit > > powerpc of a non-atomic store. > > > > That said, the patch will affect the code by adding barriers. > > Specifically, while powerpc has a sync before doing the store as part > > of writeq, wrapping in a spinlock adds a sync before releasing the lock > > whenever a writeq (or writex x=b,w,d,q) was issued inside the lock. > > > > (sync orders all reads and all writes to both memory and devices from > > that cpu). > > > > But looking further at the code, I see such things as: > > > > drivers/scsi/mpt2sas/mpt2sas_base.c line 2944 > > > > mpt2sas_base_put_smid_default(ioc, smid); > > init_completion(&ioc->base_cmds.done); > > timeleft = wait_for_completion_timeout(&ioc->base_cmds.done, > > > > where mpt2sas_base_put_smid_default is a routine that has a call to > > _base_writeq. This will initiate io to the adapter, then initialize > > the completion, then hope that the timeout is long enough to let the io > > complete and be marked done but short enough to not be a problem when > > the timeout occurs because we initialized the compeltion after the irq > > came in. > > > > The code then looks at a status flag, but there is no indication how > > the access to that field is serialized between the interrupt handler > > and the submission routine. It may mostly work due to barriers in > > the primitives but I don't see any statement of rules. > > > > Also, while I see a few wmb before writel in _base_interrupt, I don't > > see any rmb, which I would expect between establishing a element is > > valid and reading other fields in that element. > > > > So I'd really like to hear more about what your symptoms were and how > > you determined writeq on 64 bit powerpc was not atomic. > > > > Milton > > > I worked the original defect a couple months ago, and Kashyap is now > getting around to posting my patch's. > > This original defect has nothing to do with PPC64. The original > problem was only on x86. It only became a problem on PPC64 when I > tried to fix the original x86 issue by copying the writeq code from > the linux headers, then it broke PPC64. I doubt that broken patch > was ever posted. Anyways, back to the original defect. The reason > it because a problem for x86 is because the kernel headers had a > implementation of writeq in the arch/x86 headers, which means our > internal implementation of writeq is not being used. The writeq > implementation in the kernel is total wrong for arch/x86 because it > doesn't not have spin locks, and if two processor simultaneously doing > two separate 32bit pci writes, then what is received by controller > firmware is out of order. This change occurs between Red Hat RHEL5 > and RHEL6. In RHEL5, this writeq was not implemented in arch/x86 > headers, and our driver internal implementation of write was used. > > Eric So the real question should be why is x86-32 supplying a broken writeq instead of letting drivers work out what to do it when needed? It was added in 2.6.29 with out any pci or other io acks in the change log. Also the only reference I find to HAVE_WRITEQ and HAVE_READQ is the x86 selects, so I think those can just be removed (vs move to x86_64). The original changelog is: Impact: add new API for drivers Add implementation of readq/writeq to x86_32, and add config value to the x86 architecture to determine existence of readq/writeq. Ingo I would propose the following commits added in 2.6.29 be reverted. I think the current concensus is drivers must know if the writeq is not atomic so they can provide their own locking or other workaround. 2c5643b1c5c7fbb13f340d4c58944d9642f41796 x86: provide readq()/writeq() on 32-bit too a0b1131e479e5af32eefac8bc54c9742e23d638e x86: provide readq()/writeq() on 32-bit too, cleanup 93093d099e5dd0c258fd530c12668e828c20df41 x86: provide readq()/writeq() on 32-bit too, complete milton -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/