Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755456Ab1EXMfr (ORCPT ); Tue, 24 May 2011 08:35:47 -0400 Received: from smtp-out.google.com ([74.125.121.67]:35720 "EHLO smtp-out.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754082Ab1EXMfp convert rfc822-to-8bit (ORCPT ); Tue, 24 May 2011 08:35:45 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=google.com; s=beta; h=mime-version:in-reply-to:references:from:date:message-id:subject:to :cc:content-type:content-transfer-encoding; b=fEuGiZItd90+ttLDqoiUNWofKR4zQiztQyDd+AIAu8D/qwTAbgQrTD98pPvg+aPOiU Pmb216ip2w3tZItPk1mw== MIME-Version: 1.0 In-Reply-To: References: <4DD5452F.9050108@radicalsystems.co.za> From: Bjorn Helgaas Date: Tue, 24 May 2011 06:35:20 -0600 Message-ID: Subject: Re: PCI BAR1 Unassigned To: Jan Zwiegers Cc: Xianghua Xiao , "linux-pci@vger.kernel.org" , "linux-kernel@vger.kernel.org" Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 8BIT X-System-Of-Record: true Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6550 Lines: 173 On Tue, May 24, 2011 at 4:22 AM, Jan Zwiegers wrote: > On 2011-05-20 04:53 PM, Bjorn Helgaas wrote: >> >> On Fri, May 20, 2011 at 1:42 AM, Jan Zwiegers >> ?wrote: >>> >>> On 2011-05-19 10:50 PM, Xianghua Xiao wrote: >>>> >>>> On Thu, May 19, 2011 at 3:27 PM, Jan Zwiegers >>>> ?wrote: >>>>> >>>>> On 2011-05-19 08:50 PM, Bjorn Helgaas wrote: >>>>>> >>>>>> On Thu, May 19, 2011 at 10:28 AM, Jan >>>>>> Zwiegers >>>>>> ?wrote: >>>>>>> >>>>>>> I have the problem below where my PCI card's second BAR does not get >>>>>>> assigned. >>>>>>> What can be the cause of this problem? >>>>>>> The last kernel I tested on which worked OK was 2.6.27. >>>>>>> My current problematic kernel 2.6.35. >>>>>>> >>>>>>> 05:01.0 Unassigned class [ff00]: Eagle Technology PCI-703 Analog I/O >>>>>>> Card >>>>>>> (rev 5c) >>>>>>> ? ?Flags: bus master, slow devsel, latency 32, IRQ 22 >>>>>>> ? ?Memory at 93b00000 (type 3, prefetchable) [size=2K] >>>>>>> ? ?Memory at ? ? ?(type 3, prefetchable) >>>>>>> ? ?Capabilities: [80] #00 [0600] >>>>>>> ? ?Kernel modules: pci703drv >>>>>> >>>>>> Could be resource exhaustion or, more likely, we ran out because we >>>>>> now assign resource to things that don't need them, leaving none for >>>>>> things that *do* need them. ?This sounds like a regression, so we >>>>>> should open a bugzilla for it and attach dmesg logs from 2.6.27 and >>>>>> 2.6.35. >>>>>> >>>>>> Does this problem keep the driver from working? ?(Sometimes drivers >>>>>> don't actually use all the BARs a device supports.) >>>>>> >>>>>> Bjorn >>>>>> >>>>> >>>>> I'm the maintainer of the driver and was involved in the development of >>>>> the >>>>> board as well in 2003. The board uses two BARS and the second BAR is >>>>> the >>>>> most important. The board worked fine since the 2.4 days and only >>>>> recently >>>>> became problematic. I suspect it works on even later kernels than 27, >>>>> maybe >>>>> 2.6.32. >>>>> >>>>> My knowledge is too little to actually determine if the problem is >>>>> because >>>>> the FPGA based PCI interface is not within spec or something that >>>>> changed >>>>> in >>>>> the kernel, because of the post .30 releases becoming more strict to >>>>> PCI >>>>> specification, i.e. BIOS / Kernel interaction. >>>>> >>>>> Jan >>>>> -- >>>>> To unsubscribe from this list: send the line "unsubscribe linux-pci" in >>>>> the body of a message to majordomo@vger.kernel.org >>>>> More majordomo info at ?http://vger.kernel.org/majordomo-info.html >>>>> >>>> >>>> What's the size for BAR1? one reason is that no more space to >>>> align/allocate BAR1. >>>> >>>> If the board stays the same then your FPGA might be the cause, I have >>>> seen similar issues and they ended up in FPGA implementation. >>>> >>> >>> I have submitted the difference in iomem, lspci and dmesg of 2.6.27& >>> ?2.6.35 >>> kernels from the same machine. The BAR size is 2K. As above BAR0 is at >>> 93b0000 and BAR1 should be at 93b00800. >> >> Thanks for the data. >> >> I think your FPGA is "unusual" after all. ?lspci says this: >> >> ? 05:01.0 Unassigned class [ff00]: Eagle Technology PCI-703 Analog I/O >> Card (rev 5c) >> ? ? ? ?Flags: bus master, slow devsel, latency 32, IRQ 22 >> ? ? ? ?Memory at 93b00000 (type 3, prefetchable) [size=2K] >> ? ? ? ?Memory at ?(type 3, prefetchable) >> >> The "type 3" means the BAR has both type bits set (bits 1 and 2). ?The >> spec (PCI 3.0 sec 6.2.5.1) says the type field means: >> >> ? 00 - Locate anywhere in 32-bit access space >> ? 01 - Reserved >> ? 10 - Locate anywhere in 64-bit access space >> ? 11 - Reserved >> >> I think your BARs are using the "11 - Reserved" setting when they >> should be "00". ?The way Linux handles this did change between 2.6.27 >> and 2.6.35, and I think the change was unintentional, so we might >> consider changing it back. >> >> Commit e354597cce8d219d made this change to decode_bar(): >> >> ? ? ? ? ? res->flags = bar& ?~PCI_BASE_ADDRESS_MEM_MASK; >> >> ? - ? ? ? if (res->flags == PCI_BASE_ADDRESS_MEM_TYPE_64) >> ? + ? ? ? if (res->flags& ?PCI_BASE_ADDRESS_MEM_TYPE_64) >> ? ? ? ? ? ? ? ? ? return pci_bar_mem64; >> ? ? ? ? ? return pci_bar_mem32; >> >> In 2.6.27, we treated the BAR as 64-bit only if the low four bits were >> 0100 (non-prefetchable, 64-bit type, memory). ?That was incorrect, >> because we should ignore the prefetchable bit. ?The fix was to look >> *only* at bit 2, so now we decide the BAR is 64-bit if the low four >> bits are x1xx. >> >> Your BARs contain 1110 in the low four bits. ?This is invalid but was >> treated as 32-bit by 2.6.27 and as 64-bit by 2.6.35. >> >> Here's an untested Linux change I think we might consider making to >> restore the previous behavior. ?Can you try it (gmail will probably >> mangle it, so you'll have to apply it by hand)? >> >> diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c >> index 44cbbba..33894ba 100644 >> --- a/drivers/pci/probe.c >> +++ b/drivers/pci/probe.c >> @@ -138,15 +138,20 @@ static u64 pci_size(u64 base, u64 maxbase, u64 mask) >> >> ?static inline enum pci_bar_type decode_bar(struct resource *res, u32 bar) >> ?{ >> + ? ? ? u32 mem_type; >> + >> ? ? ? ? if ((bar& ?PCI_BASE_ADDRESS_SPACE) == PCI_BASE_ADDRESS_SPACE_IO) { >> ? ? ? ? ? ? ? ? res->flags = bar& ?~PCI_BASE_ADDRESS_IO_MASK; >> ? ? ? ? ? ? ? ? return pci_bar_io; >> ? ? ? ? } >> >> - ? ? ? res->flags = bar& ?~PCI_BASE_ADDRESS_MEM_MASK; >> + ? ? ? res->flags = bar& ?PCI_BASE_ADDRESS_MEM_PREFETCH; >> >> - ? ? ? if (res->flags& ?PCI_BASE_ADDRESS_MEM_TYPE_64) >> + ? ? ? mem_type = bar& ?PCI_BASE_ADDRESS_MEM_TYPE_MASK; >> + ? ? ? if (mem_type == PCI_BASE_ADDRESS_MEM_TYPE_64) { >> + ? ? ? ? ? ? ? res->flags |= PCI_BASE_ADDRESS_MEM_TYPE_64; >> ? ? ? ? ? ? ? ? return pci_bar_mem64; >> + ? ? ? } >> ? ? ? ? return pci_bar_mem32; >> ?} >> > > Hi Bjorn > > I have tested your suggested implementation and this definitely solved my > problem. Both of my BARs are now mapped as they should. > > Please indicate if the changed will be reverted. In the meantime I will try > and get this corrected in newer versions of the Eagle Technology PCI703 > FPGA's. I will clean up that patch a bit and propose it for mainline. Thanks for testing it. Bjorn -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/