Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752493Ab1EYKly (ORCPT ); Wed, 25 May 2011 06:41:54 -0400 Received: from mms3.broadcom.com ([216.31.210.19]:3531 "EHLO MMS3.broadcom.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751392Ab1EYKlv (ORCPT ); Wed, 25 May 2011 06:41:51 -0400 X-Server-Uuid: B55A25B1-5D7D-41F8-BC53-C57E7AD3C201 From: "Arend van Spriel" To: "Andrew Morton" cc: "Arend van Spriel" , linux-kernel@vger.kernel.org, linux-wireless@vger.kernel.org, "John W. Linville" , "David S. Miller" , "Dan Carpenter" , "George Spelvin" Subject: [RFC V4] lib: crc8: add new library module providing crc8 algorithm Date: Wed, 25 May 2011 12:41:39 +0200 Message-ID: <1306320099-17970-1-git-send-email-arend@broadcom.com> X-Mailer: git-send-email 1.7.4.1 MIME-Version: 1.0 X-WSS-ID: 61C2024C4NS11783332-01-01 Content-Type: text/plain Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9774 Lines: 284 !!REMARK!!: Which tree maintainer is willing to take this patch when ready? As it is mainly used in (wireless) networking protocols propose either wireless-next or net-next maintainers. The brcm80211 driver in staging tree uses a crc8 function. Based on feedback from John Linville to move this to lib directory, the linux source has been searched. Although there is currently only one other kernel driver using this algorithm (ie. drivers/ssb) we are providing this as a library function for others to use. V1: - functionality taken from brcm80211 utility function as is. - documented the crc8 header file using kernel-doc syntax. - compilation verified in-kernel and as module for x86, x86_64, arm, and mips. V2: - ran checkpatch after sending V1 (sorry for that mortal sin) so fixed that. V3: - added function crc8_create(). - crc8_create() takes polynomial and bit direction as parameters. V4: - exported bit direction specific functions for crc table creation. - remove bit direction enumeration as it is no longer needed. - change function signatures to reflect expected table size. - used size_t for buffer length parameter in crc8() function. Cc: linux-kernel@vger.kernel.org Cc: linux-wireless@vger.kernel.org Cc: "John W. Linville" Cc: "David S. Miller" Cc: Dan Carpenter Cc: George Spelvin Reviewed-by: Henry Ptasinski Reviewed-by: Roland Vossen Reviewed-by: "Franky (Zhenhui) Lin" Signed-off-by: Arend van Spriel --- include/linux/crc8.h | 101 ++++++++++++++++++++++++++++++++++++++++++++++++++ lib/Kconfig | 7 +++ lib/Makefile | 1 + lib/crc8.c | 84 +++++++++++++++++++++++++++++++++++++++++ 4 files changed, 193 insertions(+), 0 deletions(-) create mode 100644 include/linux/crc8.h create mode 100644 lib/crc8.c diff --git a/include/linux/crc8.h b/include/linux/crc8.h new file mode 100644 index 0000000..13c8dab --- /dev/null +++ b/include/linux/crc8.h @@ -0,0 +1,101 @@ +/* + * Copyright (c) 2011 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#ifndef __CRC8_H_ +#define __CRC8_H_ + +#include + +/* see usage of this value in crc8() description */ +#define CRC8_INIT_VALUE 0xFF + +/* + * Return value of crc8() indicating valid message+crc. This is true + * if a CRC is inverted before transmission. The CRC computed over the + * whole received bitstream is _table[x], where x is the bit pattern + * of the modification (almost always 0xff). + */ +#define CRC8_GOOD_VALUE(_table) (_table[0xFF]) + +/* required table size for crc8 algorithm */ +#define CRC8_TABLE_SIZE 256 + +/* helper macro assuring right table size is used */ +#define DECLARE_CRC8_TABLE(_table) \ + static u8 _table[CRC8_TABLE_SIZE] + +/** + * crc8_populate_lsb - fill crc table for given polynomial in regular bit order. + * + * @table: table to be filled. + * @polynomial: polynomial for which table is to be filled. + * + * This function fills the provided table according the polynomial provided for + * regular bit order (lsb first). Polynomials in CRC algorithms are typically + * represented as shown below. + * + * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 + * + * For lsb first direction x^7 maps to the lsb. So the polynomial is as below. + * + * - lsb first: poly = 10101011(1) = 0xAB + */ +void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); + +/** + * crc8_populate_msb - fill crc table for given polynomial in reverse bit order. + * + * @table: table to be filled. + * @polynomial: polynomial for which table is to be filled. + * + * This function fills the provided table according the polynomial provided for + * reverse bit order (msb first). Polynomials in CRC algorithms are typically + * represented as shown below. + * + * poly = x^8 + x^7 + x^6 + x^4 + x^2 + 1 + * + * For msb first direction x^7 maps to the msb. So the polynomial is as below. + * + * - msb first: poly = (1)11010101 = 0xD5 + */ +void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial); + +/** + * crc8() - calculate a crc8 over the given input data. + * + * @table: crc table used for calculation. + * @pdata: pointer to data buffer. + * @nbytes: number of bytes in data buffer. + * @crc: previous returned crc8 value. + * + * The CRC8 is calculated using the polynomial given in crc8_populate_msb() + * or crc8_populate_lsb(). + * + * The caller provides the initial value (either %CRC8_INIT_VALUE + * or the previous returned value) to allow for processing of + * discontiguous blocks of data. When generating the CRC the + * caller is responsible for complementing the final return value + * and inserting it into the byte stream. When validating a byte + * stream (including CRC8), a final return value of %CRC8_GOOD_VALUE + * indicates the byte stream data can be considered valid. + * + * Reference: + * "A Painless Guide to CRC Error Detection Algorithms", ver 3, Aug 1993 + * Williams, Ross N., rossross.net + * (see URL http://www.ross.net/crc/download/crc_v3.txt). + */ +u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc); + +#endif /* __CRC8_H_ */ diff --git a/lib/Kconfig b/lib/Kconfig index 9c10e38..ff9e5a3 100644 --- a/lib/Kconfig +++ b/lib/Kconfig @@ -89,6 +89,13 @@ config LIBCRC32C require M here. See Castagnoli93. Module will be libcrc32c. +config CRC8 + tristate "CRC8 function" + help + This option provides CRC8 function. Drivers may select this + when they need to do cyclic redundancy check according CRC8 + algorithm. Module will be called crc8. + config AUDIT_GENERIC bool depends on AUDIT && !AUDIT_ARCH diff --git a/lib/Makefile b/lib/Makefile index 4b49a24..704959d 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -65,6 +65,7 @@ obj-$(CONFIG_CRC_ITU_T) += crc-itu-t.o obj-$(CONFIG_CRC32) += crc32.o obj-$(CONFIG_CRC7) += crc7.o obj-$(CONFIG_LIBCRC32C) += libcrc32c.o +obj-$(CONFIG_CRC8) += crc8.o obj-$(CONFIG_GENERIC_ALLOCATOR) += genalloc.o obj-$(CONFIG_ZLIB_INFLATE) += zlib_inflate/ diff --git a/lib/crc8.c b/lib/crc8.c new file mode 100644 index 0000000..0ce4238 --- /dev/null +++ b/lib/crc8.c @@ -0,0 +1,84 @@ +/* + * Copyright (c) 2011 Broadcom Corporation + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY + * SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION + * OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN + * CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + */ +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt +#include +#include +#include + +/* + * crc8_populate_msb - fill crc table for given polynomial in reverse bit order. + * + * table: table to be filled. + * polynomial: polynomial for which table is to be filled. + */ +void crc8_populate_msb(u8 table[CRC8_TABLE_SIZE], u8 polynomial) +{ + int i, j; + const u8 msbit = 0x80; + u8 t = msbit; + + table[0] = 0; + + for (i = 1; i < CRC8_TABLE_SIZE; i *= 2) { + t = (t << 1) ^ (t & msbit ? polynomial : 0); + for (j = 0; j < i; j++) + table[i+j] = table[j] ^ t; + } +} +EXPORT_SYMBOL(crc8_populate_msb); + +/* + * crc8_populate_lsb - fill crc table for given polynomial in regular bit order. + * + * table: table to be filled. + * polynomial: polynomial for which table is to be filled. + */ +void crc8_populate_lsb(u8 table[CRC8_TABLE_SIZE], u8 polynomial) +{ + int i, j; + u8 t = 1; + + table[0] = 0; + + for (i = (CRC8_TABLE_SIZE >> 1); i; i >>= 1) { + t = (t >> 1) ^ (t & 1 ? polynomial : 0); + for (j = 0; j < CRC8_TABLE_SIZE; j += 2*i) + table[i+j] = table[j] ^ t; + } +} +EXPORT_SYMBOL(crc8_populate_lsb); + +/* + * crc8 - calculate a crc8 over the given input data. + * + * table: crc table used for calculation. + * pdata: pointer to data buffer. + * nbytes: number of bytes in data buffer. + * crc: previous returned crc8 value. + */ +u8 crc8(const u8 table[CRC8_TABLE_SIZE], u8 *pdata, size_t nbytes, u8 crc) +{ + /* loop over the buffer data */ + while (nbytes-- > 0) + crc = table[(crc ^ *pdata++) & 0xff]; + + return crc; +} +EXPORT_SYMBOL(crc8); + +MODULE_DESCRIPTION("CRC8 (by Williams, Ross N.) function"); +MODULE_AUTHOR("Broadcom Corporation"); +MODULE_LICENSE("Dual BSD/GPL"); -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/