Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751557Ab1FGHFq (ORCPT ); Tue, 7 Jun 2011 03:05:46 -0400 Received: from newsmtp5.atmel.com ([204.2.163.5]:59064 "EHLO sjogate2.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751299Ab1FGHFo convert rfc822-to-8bit (ORCPT ); Tue, 7 Jun 2011 03:05:44 -0400 X-MimeOLE: Produced By Microsoft Exchange V6.5 Content-class: urn:content-classes:message MIME-Version: 1.0 Content-Type: text/plain; charset="US-ASCII" Content-Transfer-Encoding: 8BIT Subject: RE: [PATCH v3] [media] at91: add Atmel Image Sensor Interface (ISI) support Date: Tue, 7 Jun 2011 15:04:59 +0800 Message-ID: <4C79549CB6F772498162A641D92D532801E23ABF@penmb01.corp.atmel.com> In-Reply-To: X-MS-Has-Attach: X-MS-TNEF-Correlator: Thread-Topic: [PATCH v3] [media] at91: add Atmel Image Sensor Interface (ISI) support Thread-Index: Acwh/dQTz/PDzLiMTqed0C6dtZ6gHAC3zayw References: <1307097008-30022-1-git-send-email-josh.wu@atmel.com> From: "Wu, Josh" To: "Guennadi Liakhovetski" Cc: , , , , "Haring, Lars" , , , X-OriginalArrivalTime: 07 Jun 2011 07:05:06.0345 (UTC) FILETIME=[3B06E190:01CC24E1] Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 35000 Lines: 1151 Hi, Guennadi On Friday, June 03, 2011, Guennadi Liakhovetski wrote > On Fri, 3 Jun 2011, Josh Wu wrote: >> This patch is to enable Atmel Image Sensor Interface (ISI) driver support. >> - Using soc-camera framework with videobuf2 dma-contig allocator >> - Supporting video streaming of YUV packed format >> - Tested on AT91SAM9M10G45-EK with OV2640 >> >> Signed-off-by: Josh Wu >> --- >> base on branch staging/for_v3.0 >> Modified in V3: >> refined the interrupt handling code. >> added a list to manage the allocated descriptors. >> removed redundant code in isi_camera_set_bus_param(). >> return error when platform data is not provided. >> >> drivers/media/video/Kconfig | 8 + >> drivers/media/video/Makefile | 1 + >> drivers/media/video/atmel-isi.c | 1074 +++++++++++++++++++++++++++++++++++++++ >> include/media/atmel-isi.h | 119 +++++ >> 4 files changed, 1202 insertions(+), 0 deletions(-) >> create mode 100644 drivers/media/video/atmel-isi.c >> create mode 100644 include/media/atmel-isi.h >> >> diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig >> index bb53de7..93d1098 100644 >> --- a/drivers/media/video/Kconfig >> +++ b/drivers/media/video/Kconfig >> @@ -952,6 +952,14 @@ config VIDEO_SAMSUNG_S5P_FIMC >> To compile this driver as a module, choose M here: the >> module will be called s5p-fimc. >> >> +config VIDEO_ATMEL_ISI >> + tristate "ATMEL Image Sensor Interface (ISI) support" >> + depends on VIDEO_DEV && SOC_CAMERA && ARCH_AT91 >> + select VIDEOBUF2_DMA_CONTIG >> + ---help--- >> + This module makes the ATMEL Image Sensor Interface available >> + as a v4l2 device. >> + >> config VIDEO_S5P_MIPI_CSIS >> tristate "Samsung S5P and EXYNOS4 MIPI CSI receiver driver" >> depends on VIDEO_V4L2 && PM_RUNTIME && PLAT_S5P && VIDEO_V4L2_SUBDEV_API >> diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile >> index f0fecd6..d9833f4 100644 >> --- a/drivers/media/video/Makefile >> +++ b/drivers/media/video/Makefile >> @@ -166,6 +166,7 @@ obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o >> obj-$(CONFIG_VIDEO_SH_MOBILE_CSI2) += sh_mobile_csi2.o >> obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o >> obj-$(CONFIG_VIDEO_OMAP1) += omap1_camera.o >> +obj-$(CONFIG_VIDEO_ATMEL_ISI) += atmel-isi.o >> >> obj-$(CONFIG_VIDEO_SAMSUNG_S5P_FIMC) += s5p-fimc/ >> >> diff --git a/drivers/media/video/atmel-isi.c b/drivers/media/video/atmel-isi.c >> new file mode 100644 >> index 0000000..a020bd3 >> --- /dev/null >> +++ b/drivers/media/video/atmel-isi.c >> @@ -0,0 +1,1074 @@ >> +/* >> + * Copyright (c) 2011 Atmel Corporation >> + * Josh Wu, >> + * >> + * Based on previous work by Lars Haring, >> + * and Sedji Gaouaou >> + * Based on the bttv driver for Bt848 with respective copyright holders >> + * >> + * This program is free software; you can redistribute it and/or modify >> + * it under the terms of the GNU General Public License version 2 as >> + * published by the Free Software Foundation. >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +#include >> +#include >> +#include >> +#include >> + >> +#define MAX_BUFFER_NUM 32 >> +#define MAX_SUPPORT_WIDTH 2048 >> +#define MAX_SUPPORT_HEIGHT 2048 >> +#define VID_LIMIT_BYTES (16 * 1024 * 1024) >> +#define MIN_FRAME_RATE 15 >> +#define FRAME_INTERVAL_MILLI_SEC (1000 / MIN_FRAME_RATE) >> + >> +/* ISI states */ >> +enum { >> + ISI_STATE_IDLE = 0, >> + ISI_STATE_READY, >> + ISI_STATE_WAIT_SOF, >> +}; >> + >> +/* Frame buffer descriptor */ >> +struct fbd { >> + /* Physical address of the frame buffer */ >> + u32 fb_address; >> + /* DMA Control Register(only in HISI2) */ >> + u32 dma_ctrl; >> + /* Physical address of the next fbd */ >> + u32 next_fbd_address; >> +}; >> + >> +static void set_dma_ctrl(struct fbd *fb_desc, u32 ctrl) >> +{ >> + fb_desc->dma_ctrl = ctrl; >> +} >> + >> +struct isi_dma_desc { >> + struct list_head list; >> + struct fbd *p_fbd; >> + u32 fbd_phys; >> +}; >> + >> +/* Frame buffer data */ >> +struct frame_buffer { >> + struct vb2_buffer vb; >> + struct fbd *p_fb_desc; >> + u32 fb_desc_phys; > Why don't you replace the above two members with "struct isi_dma_desc *"? > Then you also don't need to scan the DMA descriptor array in > .buf_cleanup(). Will fix in v4. This change makes code simpler. >> + struct list_head list; >> +}; >> + >> +struct atmel_isi { >> + /* Protects the access of variables shared with the ISR */ >> + spinlock_t lock; >> + void __iomem *regs; >> + >> + int sequence; >> + /* State of the ISI module in capturing mode */ >> + int state; >> + >> + /* Wait queue for waiting for SOF */ >> + wait_queue_head_t vsync_wq; >> + >> + struct vb2_alloc_ctx *alloc_ctx; >> + >> + /* Allocate descriptors for dma buffer use */ >> + struct fbd *p_fb_descriptors; >> + u32 fb_descriptors_phys; >> + struct list_head dma_desc_head; >> + struct isi_dma_desc dma_desc[MAX_BUFFER_NUM]; >> + >> + struct completion complete; >> + struct clk *pclk; >> + unsigned int irq; >> + >> + struct isi_platform_data *pdata; >> + >> + struct list_head video_buffer_list; >> + struct frame_buffer *active; >> + >> + struct soc_camera_device *icd; >> + struct soc_camera_host soc_host; >> +}; >> + >> +static void isi_writel(struct atmel_isi *isi, u32 reg, u32 val) >> +{ >> + writel(val, isi->regs + reg); >> +} >> +static u32 isi_readl(struct atmel_isi *isi, u32 reg) >> +{ >> + return readl(isi->regs + reg); >> +} >> + >> +static int configure_geometry(struct atmel_isi *isi, u32 width, >> + u32 height, enum v4l2_mbus_pixelcode code) >> +{ >> + u32 cfg2, cr; >> + >> + switch (code) { >> + /* YUV, including grey */ >> + case V4L2_MBUS_FMT_Y8_1X8: >> + cr = ISI_CFG2_GRAYSCALE; >> + break; >> + case V4L2_MBUS_FMT_UYVY8_2X8: >> + cr = ISI_CFG2_YCC_SWAP_MODE_3; >> + break; >> + case V4L2_MBUS_FMT_VYUY8_2X8: >> + cr = ISI_CFG2_YCC_SWAP_MODE_2; >> + break; >> + case V4L2_MBUS_FMT_YUYV8_2X8: >> + cr = ISI_CFG2_YCC_SWAP_MODE_1; >> + break; >> + case V4L2_MBUS_FMT_YVYU8_2X8: >> + cr = ISI_CFG2_YCC_SWAP_DEFAULT; >> + break; >> + /* RGB, TODO */ >> + default: >> + return -EINVAL; >> + } >> + >> + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); >> + >> + cfg2 = isi_readl(isi, ISI_CFG2); >> + cfg2 |= cr; >> + /* Set width */ >> + cfg2 &= ~(ISI_CFG2_IM_HSIZE_MASK); >> + cfg2 |= ((width - 1) << ISI_CFG2_IM_HSIZE_OFFSET) & >> + ISI_CFG2_IM_HSIZE_MASK; >> + /* Set height */ >> + cfg2 &= ~(ISI_CFG2_IM_VSIZE_MASK); >> + cfg2 |= ((height - 1) << ISI_CFG2_IM_VSIZE_OFFSET) >> + & ISI_CFG2_IM_VSIZE_MASK; >> + isi_writel(isi, ISI_CFG2, cfg2); >> + >> + return 0; >> +} >> + >> +static irqreturn_t atmel_isi_handle_streaming(struct atmel_isi *isi) >> +{ >> + if (isi->active) { >> + struct vb2_buffer *vb = &isi->active->vb; >> + struct frame_buffer *buf = isi->active; >> + >> + list_del_init(&buf->list); >> + do_gettimeofday(&vb->v4l2_buf.timestamp); >> + vb->v4l2_buf.sequence = isi->sequence++; >> + vb2_buffer_done(vb, VB2_BUF_STATE_DONE); >> + } >> + >> + if (list_empty(&isi->video_buffer_list)) { >> + isi->active = NULL; >> + } else { >> + /* start next dma frame. */ >> + isi->active = list_entry(isi->video_buffer_list.next, >> + struct frame_buffer, list); >> + isi_writel(isi, ISI_DMA_C_DSCR, isi->active->fb_desc_phys); >> + isi_writel(isi, ISI_DMA_C_CTRL, >> + ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); >> + isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH); >> + } >> + return IRQ_HANDLED; >> +} >> + >> +/* ISI interrupt service routine */ >> +static irqreturn_t isi_interrupt(int irq, void *dev_id) >> +{ >> + struct atmel_isi *isi = dev_id; >> + u32 status, mask, pending; >> + irqreturn_t ret = IRQ_NONE; >> + >> + spin_lock(&isi->lock); >> + >> + status = isi_readl(isi, ISI_STATUS); >> + mask = isi_readl(isi, ISI_INTMASK); >> + pending = status & mask; >> + >> + if (pending & ISI_CTRL_SRST) { >> + complete(&isi->complete); >> + isi_writel(isi, ISI_INTDIS, ISI_CTRL_SRST); >> + ret = IRQ_HANDLED; >> + } else if (pending & ISI_CTRL_DIS) { >> + complete(&isi->complete); >> + isi_writel(isi, ISI_INTDIS, ISI_CTRL_DIS); >> + ret = IRQ_HANDLED; >> + } else { >> + if ((pending & ISI_SR_VSYNC) && >> + (isi->state == ISI_STATE_IDLE)) { > Superfluous second pair of parenthesis I think using both pair of parenthesis will make code clearer. Can you accept this? >> + isi->state = ISI_STATE_READY; >> + wake_up_interruptible(&isi->vsync_wq); >> + ret = IRQ_HANDLED; >> + } >> + if (likely(pending & ISI_SR_CXFR_DONE)) >> + ret = atmel_isi_handle_streaming(isi); >> + } >> + >> + spin_unlock(&isi->lock); >> + return ret; >> +} >> + >> +#define WAIT_ISI_RESET 1 >> +#define WAIT_ISI_DISABLE 0 >> +static int atmel_isi_wait_status(struct atmel_isi *isi, int wait_reset) >> +{ >> + unsigned long timeout; >> + /* >> + * The reset or disable will only succeed if we have a >> + * pixel clock from the camera. >> + */ >> + init_completion(&isi->complete); >> + >> + if (wait_reset) { >> + isi_writel(isi, ISI_INTEN, ISI_CTRL_SRST); >> + isi_writel(isi, ISI_CTRL, ISI_CTRL_SRST); >> + } else { >> + isi_writel(isi, ISI_INTEN, ISI_CTRL_DIS); >> + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); >> + } >> + >> + timeout = wait_for_completion_timeout(&isi->complete, >> + msecs_to_jiffies(100)); >> + if (timeout == 0) >> + return -ETIMEDOUT; >> + >> + return 0; >> +} >> + >> +/* ------------------------------------------------------------------ >> + Videobuf operations >> + ------------------------------------------------------------------*/ >> +static int queue_setup(struct vb2_queue *vq, unsigned int *nbuffers, >> + unsigned int *nplanes, unsigned long sizes[], >> + void *alloc_ctxs[]) >> +{ >> + struct soc_camera_device *icd = soc_camera_from_vb2q(vq); >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + unsigned long size; >> + int ret, bytes_per_line; >> + >> + /* Reset ISI */ >> + ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET); >> + if (ret < 0) { >> + dev_err(icd->dev.parent, "Reset ISI timed out\n"); >> + return ret; >> + } >> + /* Disable all interrupts */ >> + isi_writel(isi, ISI_INTDIS, ~0UL); >> + >> + bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, >> + icd->current_fmt->host_fmt); >> + >> + if (bytes_per_line < 0) >> + return bytes_per_line; >> + >> + size = bytes_per_line * icd->user_height; >> + >> + if (*nbuffers == 0) >> + *nbuffers = MAX_BUFFER_NUM; >> + else if (*nbuffers > MAX_BUFFER_NUM) >> + *nbuffers = MAX_BUFFER_NUM; > /me wondering, why not just > > if (!*nbuffers || *nbuffers > MAX_BUFFER_NUM) > *nbuffers = MAX_BUFFER_NUM; Will fixed in v4. >> + >> + if (size * *nbuffers > VID_LIMIT_BYTES) >> + *nbuffers = VID_LIMIT_BYTES / size; >> + >> + *nplanes = 1; >> + sizes[0] = size; >> + alloc_ctxs[0] = isi->alloc_ctx; >> + >> + isi->sequence = 0; >> + isi->active = NULL; >> + >> + dev_dbg(icd->dev.parent, "%s, count=%d, size=%ld\n", __func__, >> + *nbuffers, size); >> + >> + return 0; >> +} >> + >> +static int buffer_init(struct vb2_buffer *vb) >> +{ >> + struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb); >> + >> + buf->p_fb_desc = NULL; >> + memset(&buf->fb_desc_phys, 0, sizeof(buf->fb_desc_phys)); > I don't think this is what the reviewer meant - here you're using memset > to nullify a u32 field. He probably was asking you to clean the whole > struct frame_buffer, which I actually don't necessarily agree with. So, > unless there's an evidence, why that memest is needed, I'd just keep your > original "->fb_desc_phys = 0". Notice, none of the soc-camera drivers > nullifies anything in .buf_init(), it cannot also be mandatory, because > the actual method is optional. Well, in the v4 version, only following code are needed in this function. buf->p_dma_desc = NULL; INIT_LIST_HEAD(&buf->list); >> + INIT_LIST_HEAD(&buf->list); >> + >> + return 0; >> +} >> + >> +static int buffer_prepare(struct vb2_buffer *vb) >> +{ >> + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); >> + struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb); >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + unsigned long size; >> + struct isi_dma_desc *desc; >> + int bytes_per_line = soc_mbus_bytes_per_line(icd->user_width, >> + icd->current_fmt->host_fmt); >> + >> + if (bytes_per_line < 0) >> + return bytes_per_line; >> + >> + size = bytes_per_line * icd->user_height; >> + >> + if (vb2_plane_size(vb, 0) < size) { >> + dev_err(icd->dev.parent, "%s data will not fit into plane (%lu < %lu)\n", >> + __func__, vb2_plane_size(vb, 0), size); >> + return -EINVAL; >> + } >> + >> + vb2_set_plane_payload(&buf->vb, 0, size); >> + >> + if (!buf->p_fb_desc) { >> + if (list_empty(&isi->dma_desc_head)) { >> + dev_err(icd->dev.parent, "Not enough dma descriptors.\n"); >> + return -EINVAL; >> + } else { >> + /* Get an available descriptor */ >> + desc = list_entry(isi->dma_desc_head.next, >> + struct isi_dma_desc, list); >> + buf->p_fb_desc = desc->p_fbd; >> + buf->fb_desc_phys = desc->fbd_phys; >> + >> + /* Initialize the dma descriptor */ >> + buf->p_fb_desc->fb_address = >> + vb2_dma_contig_plane_paddr(vb, 0); >> + buf->p_fb_desc->next_fbd_address = 0; >> + set_dma_ctrl(buf->p_fb_desc, ISI_DMA_CTRL_WB); >> + >> + /* Delete the descriptor since now it is used */ >> + list_del_init(&desc->list); > It probably doesn't matter here, if there were a race, you'd need to > protect anyway, but stylistically you usually first grab ownership of an > object, and only then you modify it, so, it would be more logical to first > list_del(init) the buffer. As for locking as such - we just rely on v4l2 > file-operation mutex locking for now. I will fix it in v4. >> + } >> + } >> + return 0; >> +} >> + >> +static void buffer_cleanup(struct vb2_buffer *vb) >> +{ >> + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb); >> + unsigned long flags; >> + int i; >> + >> + spin_lock_irqsave(&isi->lock, flags); > You say, this lock protects data, shared with the ISR, these are the > buffer list and the ->state, none of them is accessed below. I think I can remove the spin_lock here. >> + if (buf->p_fb_desc) { >> + /* This descriptor is available now and we add to head list */ >> + for (i = 0; i < MAX_BUFFER_NUM; i++) >> + if (isi->dma_desc[i].p_fbd == buf->p_fb_desc) { >> + list_add(&isi->dma_desc[i].list, >> + &isi->dma_desc_head); >> + break; >> + } > With modified struct frame_buffer the above loop will go. sure. >> + >> + buf->p_fb_desc = NULL; >> + memset(&buf->fb_desc_phys, 0, sizeof(buf->fb_desc_phys)); > You really need to do clean up in .buf_cleanup() and in .buf_init()? I > think, one of them should be enough. And memset is bogus here too. This initialization code is only needed in buffer_init(). I will remove such code in buffer_cleanup(). >> + } >> + spin_unlock_irqrestore(&isi->lock, flags); >> +} >> + >> +static void start_dma(struct atmel_isi *isi, struct frame_buffer *buffer) >> +{ >> + u32 ctrl, cfg1; >> + >> + cfg1 = isi_readl(isi, ISI_CFG1); >> + /* Enable irq: cxfr for the codec path, pxfr for the preview path */ >> + isi_writel(isi, ISI_INTEN, >> + ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE); >> + >> + /* Check if already in a frame */ >> + if (isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) { >> + dev_err(isi->icd->dev.parent, "Already in frame handling.\n"); >> + return; >> + } >> + >> + isi_writel(isi, ISI_DMA_C_DSCR, buffer->fb_desc_phys); >> + isi_writel(isi, ISI_DMA_C_CTRL, ISI_DMA_CTRL_FETCH | ISI_DMA_CTRL_DONE); >> + isi_writel(isi, ISI_DMA_CHER, ISI_DMA_CHSR_C_CH); >> + >> + /* Enable linked list */ >> + cfg1 |= isi->pdata->frate | ISI_CFG1_DISCR; >> + >> + /* Enable codec path and ISI */ >> + ctrl = ISI_CTRL_CDC | ISI_CTRL_EN; >> + isi_writel(isi, ISI_CTRL, ctrl); >> + isi_writel(isi, ISI_CFG1, cfg1); >> +} >> + >> +static void buffer_queue(struct vb2_buffer *vb) >> +{ >> + struct soc_camera_device *icd = soc_camera_from_vb2q(vb->vb2_queue); >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + struct frame_buffer *buf = container_of(vb, struct frame_buffer, vb); >> + unsigned long flags = 0; >> + >> + spin_lock_irqsave(&isi->lock, flags); >> + list_add_tail(&buf->list, &isi->video_buffer_list); >> + >> + if (isi->active == NULL) { >> + isi->active = buf; >> + start_dma(isi, buf); >> + } >> + spin_unlock_irqrestore(&isi->lock, flags); >> +} >> + >> +static int start_streaming(struct vb2_queue *vq) >> +{ >> + struct soc_camera_device *icd = soc_camera_from_vb2q(vq); >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + >> + u32 sr = 0; >> + int ret; >> + >> + spin_lock_irq(&isi->lock); >> + isi->state = ISI_STATE_IDLE; >> + >> + /* Clear any pending SOF interrupt */ >> + sr = isi_readl(isi, ISI_STATUS); >> + /* Enable VSYNC interrupt for SOF */ >> + isi_writel(isi, ISI_INTEN, ISI_SR_VSYNC); >> + isi_writel(isi, ISI_CTRL, ISI_CTRL_EN); >> + >> + spin_unlock_irq(&isi->lock); >> + dev_dbg(icd->dev.parent, "Waiting for SOF\n"); >> + ret = wait_event_interruptible(isi->vsync_wq, >> + isi->state != ISI_STATE_IDLE); >> + if (ret) >> + return ret; >> + >> + if (isi->state != ISI_STATE_READY) >> + return -EIO; >> + >> + spin_lock_irq(&isi->lock); >> + isi->state = ISI_STATE_WAIT_SOF; >> + isi_writel(isi, ISI_INTDIS, ISI_SR_VSYNC); >> + spin_unlock_irq(&isi->lock); >> + >> + return 0; >> +} >> + >> +/* abort streaming and wait for last buffer */ >> +static int stop_streaming(struct vb2_queue *vq) >> +{ >> + struct soc_camera_device *icd = soc_camera_from_vb2q(vq); >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + struct frame_buffer *buf, *node; >> + int ret = 0; >> + unsigned long timeout; >> + >> + spin_lock_irq(&isi->lock); >> + isi->active = NULL; >> + /* Release all active buffers */ >> + list_for_each_entry_safe(buf, node, &isi->video_buffer_list, list) { >> + list_del_init(&buf->list); >> + vb2_buffer_done(&buf->vb, VB2_BUF_STATE_ERROR); >> + } >> + spin_unlock_irq(&isi->lock); >> + >> + timeout = jiffies + FRAME_INTERVAL_MILLI_SEC * HZ; >> + /* Wait until the end of the current frame. */ >> + while ((isi_readl(isi, ISI_STATUS) & ISI_CTRL_CDC) && >> + time_before(jiffies, timeout)) >> + msleep(1); >> + >> + if (time_after(jiffies, timeout)) { >> + dev_err(icd->dev.parent, >> + "Timeout waiting for finishing codec request\n"); >> + return -ETIMEDOUT; >> + } >> + >> + /* Disable interrupts */ >> + isi_writel(isi, ISI_INTDIS, >> + ISI_SR_CXFR_DONE | ISI_SR_PXFR_DONE); >> + >> + /* Disable ISI and wait for it is done */ >> + ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE); >> + if (ret < 0) >> + dev_err(icd->dev.parent, "Disable ISI timed out\n"); >> + >> + return ret; >> +} >> + >> +static struct vb2_ops isi_video_qops = { >> + .queue_setup = queue_setup, >> + .buf_init = buffer_init, >> + .buf_prepare = buffer_prepare, >> + .buf_cleanup = buffer_cleanup, >> + .buf_queue = buffer_queue, >> + .start_streaming = start_streaming, >> + .stop_streaming = stop_streaming, >> + .wait_prepare = soc_camera_unlock, >> + .wait_finish = soc_camera_lock, >> +}; >> + >> +/* ------------------------------------------------------------------ >> + SOC camera operations for the device >> + ------------------------------------------------------------------*/ >> +static int isi_camera_init_videobuf(struct vb2_queue *q, >> + struct soc_camera_device *icd) >> +{ >> + q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; >> + q->io_modes = VB2_MMAP; >> + q->drv_priv = icd; >> + q->buf_struct_size = sizeof(struct frame_buffer); >> + q->ops = &isi_video_qops; >> + q->mem_ops = &vb2_dma_contig_memops; >> + >> + return vb2_queue_init(q); >> +} >> + >> +static int isi_camera_set_fmt(struct soc_camera_device *icd, >> + struct v4l2_format *f) >> +{ >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); >> + const struct soc_camera_format_xlate *xlate; >> + struct v4l2_pix_format *pix = &f->fmt.pix; >> + struct v4l2_mbus_framefmt mf; >> + int ret; >> + >> + xlate = soc_camera_xlate_by_fourcc(icd, pix->pixelformat); >> + if (!xlate) { >> + dev_warn(icd->dev.parent, "Format %x not found\n", >> + pix->pixelformat); >> + return -EINVAL; >> + } >> + >> + dev_dbg(icd->dev.parent, "Plan to set format %dx%d\n", >> + pix->width, pix->height); >> + >> + mf.width = pix->width; >> + mf.height = pix->height; >> + mf.field = pix->field; >> + mf.colorspace = pix->colorspace; >> + mf.code = xlate->code; >> + >> + ret = v4l2_subdev_call(sd, video, s_mbus_fmt, &mf); >> + if (ret < 0) >> + return ret; >> + >> + if (mf.code != xlate->code) >> + return -EINVAL; >> + >> + ret = configure_geometry(isi, pix->width, pix->height, xlate->code); >> + if (ret < 0) >> + return ret; >> + >> + pix->width = mf.width; >> + pix->height = mf.height; >> + pix->field = mf.field; >> + pix->colorspace = mf.colorspace; >> + icd->current_fmt = xlate; >> + >> + dev_dbg(icd->dev.parent, "Finally set format %dx%d\n", >> + pix->width, pix->height); >> + >> + return ret; >> +} >> + >> +static int isi_camera_try_fmt(struct soc_camera_device *icd, >> + struct v4l2_format *f) >> +{ >> + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); >> + const struct soc_camera_format_xlate *xlate; >> + struct v4l2_pix_format *pix = &f->fmt.pix; >> + struct v4l2_mbus_framefmt mf; >> + u32 pixfmt = pix->pixelformat; >> + int ret; >> + >> + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); >> + if (pixfmt && !xlate) { >> + dev_warn(icd->dev.parent, "Format %x not found\n", pixfmt); >> + return -EINVAL; >> + } >> + >> + /* limit to Atmel ISI hardware capabilities */ >> + if (pix->height > MAX_SUPPORT_HEIGHT) >> + pix->height = MAX_SUPPORT_HEIGHT; >> + if (pix->width > MAX_SUPPORT_WIDTH) >> + pix->width = MAX_SUPPORT_WIDTH; >> + >> + /* limit to sensor capabilities */ >> + mf.width = pix->width; >> + mf.height = pix->height; >> + mf.field = pix->field; >> + mf.colorspace = pix->colorspace; >> + mf.code = xlate->code; >> + >> + ret = v4l2_subdev_call(sd, video, try_mbus_fmt, &mf); >> + if (ret < 0) >> + return ret; >> + >> + pix->width = mf.width; >> + pix->height = mf.height; >> + pix->colorspace = mf.colorspace; >> + >> + switch (mf.field) { >> + case V4L2_FIELD_ANY: >> + pix->field = V4L2_FIELD_NONE; >> + break; >> + case V4L2_FIELD_NONE: >> + break; >> + default: >> + dev_err(icd->dev.parent, "Field type %d unsupported.\n", >> + mf.field); >> + ret = -EINVAL; >> + } >> + >> + return ret; >> +} >> + >> +static const struct soc_mbus_pixelfmt isi_camera_formats[] = { >> + { >> + .fourcc = V4L2_PIX_FMT_YUYV, >> + .name = "Packed YUV422 16 bit", >> + .bits_per_sample = 8, >> + .packing = SOC_MBUS_PACKING_2X8_PADHI, >> + .order = SOC_MBUS_ORDER_LE, >> + }, >> +}; >> + >> +/* This will be corrected as we get more formats */ >> +static bool isi_camera_packing_supported(const struct soc_mbus_pixelfmt *fmt) >> +{ >> + return fmt->packing == SOC_MBUS_PACKING_NONE || >> + (fmt->bits_per_sample == 8 && >> + fmt->packing == SOC_MBUS_PACKING_2X8_PADHI) || >> + (fmt->bits_per_sample > 8 && >> + fmt->packing == SOC_MBUS_PACKING_EXTEND16); >> +} >> + >> +static unsigned long make_bus_param(struct atmel_isi *isi) >> +{ >> + unsigned long flags; >> + /* >> + * Platform specified synchronization and pixel clock polarities are >> + * only a recommendation and are only used during probing. Atmel ISI >> + * camera interface only works in master mode, i.e., uses HSYNC and >> + * VSYNC signals from the sensor >> + */ >> + flags = SOCAM_MASTER | >> + SOCAM_HSYNC_ACTIVE_HIGH | >> + SOCAM_HSYNC_ACTIVE_LOW | >> + SOCAM_VSYNC_ACTIVE_HIGH | >> + SOCAM_VSYNC_ACTIVE_LOW | >> + SOCAM_PCLK_SAMPLE_RISING | >> + SOCAM_PCLK_SAMPLE_FALLING | >> + SOCAM_DATA_ACTIVE_HIGH; >> + >> + if (isi->pdata->data_width_flags & ISI_DATAWIDTH_10) >> + flags |= SOCAM_DATAWIDTH_10; >> + >> + if (isi->pdata->data_width_flags & ISI_DATAWIDTH_8) >> + flags |= SOCAM_DATAWIDTH_8; >> + >> + if (flags & SOCAM_DATAWIDTH_MASK) >> + return flags; >> + >> + return 0; >> +} >> + >> +static int isi_camera_try_bus_param(struct soc_camera_device *icd, >> + unsigned char buswidth) >> +{ >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + unsigned long camera_flags; >> + int ret; >> + >> + camera_flags = icd->ops->query_bus_param(icd); >> + ret = soc_camera_bus_param_compatible(camera_flags, >> + make_bus_param(isi)); >> + if (!ret) >> + return -EINVAL; >> + return 0; >> +} >> + >> + >> +static int isi_camera_get_formats(struct soc_camera_device *icd, >> + unsigned int idx, >> + struct soc_camera_format_xlate *xlate) >> +{ >> + struct v4l2_subdev *sd = soc_camera_to_subdev(icd); >> + int formats = 0, ret; >> + /* sensor format */ >> + enum v4l2_mbus_pixelcode code; >> + /* soc camera host format */ >> + const struct soc_mbus_pixelfmt *fmt; >> + >> + ret = v4l2_subdev_call(sd, video, enum_mbus_fmt, idx, &code); >> + if (ret < 0) >> + /* No more formats */ >> + return 0; >> + >> + fmt = soc_mbus_get_fmtdesc(code); >> + if (!fmt) { >> + dev_err(icd->dev.parent, >> + "Invalid format code #%u: %d\n", idx, code); >> + return 0; >> + } >> + >> + /* This also checks support for the requested bits-per-sample */ >> + ret = isi_camera_try_bus_param(icd, fmt->bits_per_sample); >> + if (ret < 0) { >> + dev_err(icd->dev.parent, >> + "Fail to try the bus parameters.\n"); >> + return 0; >> + } >> + >> + switch (code) { >> + case V4L2_MBUS_FMT_UYVY8_2X8: >> + case V4L2_MBUS_FMT_VYUY8_2X8: >> + case V4L2_MBUS_FMT_YUYV8_2X8: >> + case V4L2_MBUS_FMT_YVYU8_2X8: >> + formats++; >> + if (xlate) { >> + xlate->host_fmt = &isi_camera_formats[0]; >> + xlate->code = code; >> + xlate++; >> + dev_dbg(icd->dev.parent, "Providing format %s using code %d\n", >> + isi_camera_formats[0].name, code); >> + } >> + break; >> + default: >> + if (!isi_camera_packing_supported(fmt)) >> + return 0; >> + if (xlate) >> + dev_dbg(icd->dev.parent, >> + "Providing format %s in pass-through mode\n", >> + fmt->name); >> + } >> + >> + /* Generic pass-through */ >> + formats++; >> + if (xlate) { >> + xlate->host_fmt = fmt; >> + xlate->code = code; >> + xlate++; >> + } >> + >> + return formats; >> +} >> + >> +/* Called with .video_lock held */ >> +static int isi_camera_add_device(struct soc_camera_device *icd) >> +{ >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + int ret; >> + >> + if (isi->icd) >> + return -EBUSY; >> + >> + ret = clk_enable(isi->pclk); >> + if (ret) >> + return ret; >> + >> + isi->icd = icd; >> + dev_dbg(icd->dev.parent, "Atmel ISI Camera driver attached to camera %d\n", >> + icd->devnum); >> + return 0; >> +} >> +/* Called with .video_lock held */ >> +static void isi_camera_remove_device(struct soc_camera_device *icd) >> +{ >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + >> + BUG_ON(icd != isi->icd); >> + >> + clk_disable(isi->pclk); >> + isi->icd = NULL; >> + >> + dev_dbg(icd->dev.parent, "Atmel ISI Camera driver detached from camera %d\n", >> + icd->devnum); >> +} >> + >> +static unsigned int isi_camera_poll(struct file *file, poll_table *pt) >> +{ >> + struct soc_camera_device *icd = file->private_data; >> + >> + return vb2_poll(&icd->vb2_vidq, file, pt); >> +} >> + >> +static int isi_camera_querycap(struct soc_camera_host *ici, >> + struct v4l2_capability *cap) >> +{ >> + strcpy(cap->driver, "atmel-isi"); >> + strcpy(cap->card, "Atmel Image Sensor Interface"); >> + cap->capabilities = (V4L2_CAP_VIDEO_CAPTURE | >> + V4L2_CAP_STREAMING); >> + return 0; >> +} >> + >> +static int isi_camera_set_bus_param(struct soc_camera_device *icd, u32 pixfmt) >> +{ >> + struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); >> + struct atmel_isi *isi = ici->priv; >> + unsigned long bus_flags, camera_flags, common_flags; >> + int ret; >> + u32 cfg1 = 0; >> + >> + camera_flags = icd->ops->query_bus_param(icd); >> + >> + bus_flags = make_bus_param(isi); >> + common_flags = soc_camera_bus_param_compatible(camera_flags, bus_flags); >> + dev_dbg(icd->dev.parent, "Flags cam: 0x%lx host: 0x%lx common: 0x%lx\n", >> + camera_flags, bus_flags, common_flags); >> + if (!common_flags) >> + return -EINVAL; >> + >> + /* Make choises, based on platform preferences */ >> + if ((common_flags & SOCAM_HSYNC_ACTIVE_HIGH) && >> + (common_flags & SOCAM_HSYNC_ACTIVE_LOW)) { >> + if (isi->pdata->hsync_act_low) >> + common_flags &= ~SOCAM_HSYNC_ACTIVE_HIGH; >> + else >> + common_flags &= ~SOCAM_HSYNC_ACTIVE_LOW; >> + } >> + >> + if ((common_flags & SOCAM_VSYNC_ACTIVE_HIGH) && >> + (common_flags & SOCAM_VSYNC_ACTIVE_LOW)) { >> + if (isi->pdata->vsync_act_low) >> + common_flags &= ~SOCAM_VSYNC_ACTIVE_HIGH; >> + else >> + common_flags &= ~SOCAM_VSYNC_ACTIVE_LOW; >> + } >> + >> + if ((common_flags & SOCAM_PCLK_SAMPLE_RISING) && >> + (common_flags & SOCAM_PCLK_SAMPLE_FALLING)) { >> + if (isi->pdata->pclk_act_falling) >> + common_flags &= ~SOCAM_PCLK_SAMPLE_RISING; >> + else >> + common_flags &= ~SOCAM_PCLK_SAMPLE_FALLING; >> + } >> + >> + ret = icd->ops->set_bus_param(icd, common_flags); >> + if (ret < 0) { >> + dev_dbg(icd->dev.parent, "Camera set_bus_param(%lx) returned %d\n", >> + common_flags, ret); >> + return ret; >> + } >> + >> + /* set bus param for ISI */ >> + if (common_flags & SOCAM_HSYNC_ACTIVE_LOW) >> + cfg1 |= ISI_CFG1_HSYNC_POL_ACTIVE_LOW; >> + if (common_flags & SOCAM_VSYNC_ACTIVE_LOW) >> + cfg1 |= ISI_CFG1_VSYNC_POL_ACTIVE_LOW; >> + if (common_flags & SOCAM_PCLK_SAMPLE_FALLING) >> + cfg1 |= ISI_CFG1_PIXCLK_POL_ACTIVE_FALLING; >> + >> + if (isi->pdata->has_emb_sync) >> + cfg1 |= ISI_CFG1_EMB_SYNC; >> + if (isi->pdata->isi_full_mode) >> + cfg1 |= ISI_CFG1_FULL_MODE; >> + >> + isi_writel(isi, ISI_CTRL, ISI_CTRL_DIS); >> + isi_writel(isi, ISI_CFG1, cfg1); >> + >> + return 0; >> +} >> + >> +static struct soc_camera_host_ops isi_soc_camera_host_ops = { >> + .owner = THIS_MODULE, >> + .add = isi_camera_add_device, >> + .remove = isi_camera_remove_device, >> + .set_fmt = isi_camera_set_fmt, >> + .try_fmt = isi_camera_try_fmt, >> + .get_formats = isi_camera_get_formats, >> + .init_videobuf2 = isi_camera_init_videobuf, >> + .poll = isi_camera_poll, >> + .querycap = isi_camera_querycap, >> + .set_bus_param = isi_camera_set_bus_param, >> +}; >> + >> +/* -----------------------------------------------------------------------*/ >> +static int __devexit atmel_isi_remove(struct platform_device *pdev) >> +{ >> + struct soc_camera_host *soc_host = to_soc_camera_host(&pdev->dev); >> + struct atmel_isi *isi = container_of(soc_host, >> + struct atmel_isi, soc_host); >> + > Wouldn't it be better to first free IRQs to prevent any possible > interrupts? I'll move it ahead. >> + soc_camera_host_unregister(soc_host); >> + vb2_dma_contig_cleanup_ctx(isi->alloc_ctx); >> + dma_free_coherent(&pdev->dev, >> + sizeof(struct fbd) * MAX_BUFFER_NUM, >> + isi->p_fb_descriptors, >> + isi->fb_descriptors_phys); >> + >> + free_irq(isi->irq, isi); >> + iounmap(isi->regs); >> + clk_put(isi->pclk); >> + kfree(isi); >> + >> + return 0; >> +} >> + >> +static int __devinit atmel_isi_probe(struct platform_device *pdev) >> +{ >> + unsigned int irq; >> + struct atmel_isi *isi; >> + struct clk *pclk; >> + struct resource *regs; >> + int ret, i; >> + struct device *dev = &pdev->dev; >> + struct soc_camera_host *soc_host; >> + >> + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + if (!regs) >> + return -ENXIO; >> + >> + pclk = clk_get(&pdev->dev, "isi_clk"); >> + if (IS_ERR(pclk)) >> + return PTR_ERR(pclk); >> + >> + isi = kzalloc(sizeof(struct atmel_isi), GFP_KERNEL); >> + if (!isi) { >> + ret = -ENOMEM; >> + dev_err(&pdev->dev, "Can't allocate interface!\n"); >> + goto err_alloc_isi; >> + } >> + >> + isi->pclk = pclk; >> + >> + spin_lock_init(&isi->lock); >> + init_waitqueue_head(&isi->vsync_wq); >> + >> + isi->p_fb_descriptors = dma_alloc_coherent(&pdev->dev, >> + sizeof(struct fbd) * MAX_BUFFER_NUM, >> + &isi->fb_descriptors_phys, >> + GFP_KERNEL); >> + if (!isi->p_fb_descriptors) { >> + ret = -ENOMEM; >> + dev_err(&pdev->dev, "Can't allocate descriptors!\n"); >> + goto err_alloc_descriptors; >> + } >> + >> + INIT_LIST_HEAD(&isi->dma_desc_head); >> + for (i = 0; i < MAX_BUFFER_NUM; i++) { >> + isi->dma_desc[i].p_fbd = isi->p_fb_descriptors + i; >> + isi->dma_desc[i].fbd_phys = isi->fb_descriptors_phys + >> + i * sizeof(struct fbd); >> + list_add(&isi->dma_desc[i].list, &isi->dma_desc_head); >> + } >> + >> + isi->alloc_ctx = vb2_dma_contig_init_ctx(&pdev->dev); >> + if (IS_ERR(isi->alloc_ctx)) { >> + ret = PTR_ERR(isi->alloc_ctx); >> + goto err_alloc_ctx; >> + } >> + >> + isi->regs = ioremap(regs->start, resource_size(regs)); >> + if (!isi->regs) { >> + ret = -ENOMEM; >> + goto err_ioremap; >> + } >> + >> + if (!dev->platform_data) { > I would do this check right in the beginning of this function to simplify > error handling. yes, indeed simplify the error handling code a lot. I'll change it. >> + dev_err(&pdev->dev, >> + "No config available for Atmel ISI\n"); >> + ret = -EINVAL; >> + goto err_req_irq; >> + } >> + >> + isi->pdata = dev->platform_data; >> + if (isi->pdata->data_width_flags == 0) { > And this check too. You can even unite them into one like >+ if (!dev->platform_data || !dev->platform_data->data_width_flags) { >+ ... >+ } I will change this. > Thanks > Guennadi Thank you. >> [snip] Best Regards, Josh Wu -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/