Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754874Ab1FITWb (ORCPT ); Thu, 9 Jun 2011 15:22:31 -0400 Received: from mail-pz0-f46.google.com ([209.85.210.46]:59617 "EHLO mail-pz0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751437Ab1FITW0 (ORCPT ); Thu, 9 Jun 2011 15:22:26 -0400 DomainKey-Signature: a=rsa-sha1; c=nofws; d=gmail.com; s=gamma; h=from:to:cc:subject:date:message-id:x-mailer:in-reply-to:references; b=qLEQTiYmQDI5o6jUy4g3OTNc6O1OQhw5c4CDmwmxheEPcuOQSkw6lPGkNkG2Sjg7mz Jj/gctfYO/2uaMDBnacn++IxETt6BjiHy4C3cLa1AGhN2sje4WC6WSVq2lQE7zdNtgP+ 7pkKlc1sv5fQHiXLj0BugV5S50/7X1g1Ffi4Q= From: dirk.brandewie@gmail.com To: linux-kernel@vger.kernel.org, linux-i2c@vger.kernel.org Cc: Jean-Hugues Deschenes , Dirk Brandewie , Ben Dooks Subject: [PATCH 01/13] i2c-designware: Use local version of readl & writel Date: Thu, 9 Jun 2011 12:21:38 -0700 Message-Id: <1307647310-24332-2-git-send-email-dirk.brandewie@gmail.com> X-Mailer: git-send-email 1.7.3.4 In-Reply-To: <1307647310-24332-1-git-send-email-dirk.brandewie@gmail.com> References: <1307647310-24332-1-git-send-email-dirk.brandewie@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8817 Lines: 262 From: Jean-Hugues Deschenes Use local versions of readl & writel, so per-access manipulations may be performed Signed-off-by: Jean-Hugues Deschenes Signed-off-by: Dirk Brandewie Signed-off-by: Ben Dooks --- drivers/i2c/busses/i2c-designware.c | 88 +++++++++++++++++++--------------- 1 files changed, 49 insertions(+), 39 deletions(-) diff --git a/drivers/i2c/busses/i2c-designware.c b/drivers/i2c/busses/i2c-designware.c index b7a51c4..1afb8c0 100644 --- a/drivers/i2c/busses/i2c-designware.c +++ b/drivers/i2c/busses/i2c-designware.c @@ -220,6 +220,16 @@ struct dw_i2c_dev { unsigned int rx_fifo_depth; }; +static u32 dw_readl(struct dw_i2c_dev *dev, int offset) +{ + return readl(dev->base + offset); +} + +static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset) +{ + writel(b, dev->base + offset); +} + static u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset) { @@ -289,7 +299,7 @@ static void i2c_dw_init(struct dw_i2c_dev *dev) u32 ic_con, hcnt, lcnt; /* Disable the adapter */ - writel(0, dev->base + DW_IC_ENABLE); + dw_writel(dev, 0, DW_IC_ENABLE); /* set standard and fast speed deviders for high/low periods */ @@ -303,8 +313,8 @@ static void i2c_dw_init(struct dw_i2c_dev *dev) 47, /* tLOW = 4.7 us */ 3, /* tf = 0.3 us */ 0); /* No offset */ - writel(hcnt, dev->base + DW_IC_SS_SCL_HCNT); - writel(lcnt, dev->base + DW_IC_SS_SCL_LCNT); + dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT); + dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT); dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); /* Fast-mode */ @@ -317,18 +327,18 @@ static void i2c_dw_init(struct dw_i2c_dev *dev) 13, /* tLOW = 1.3 us */ 3, /* tf = 0.3 us */ 0); /* No offset */ - writel(hcnt, dev->base + DW_IC_FS_SCL_HCNT); - writel(lcnt, dev->base + DW_IC_FS_SCL_LCNT); + dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT); + dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT); dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt); /* Configure Tx/Rx FIFO threshold levels */ - writel(dev->tx_fifo_depth - 1, dev->base + DW_IC_TX_TL); - writel(0, dev->base + DW_IC_RX_TL); + dw_writel(dev, dev->tx_fifo_depth - 1, DW_IC_TX_TL); + dw_writel(dev, 0, DW_IC_RX_TL); /* configure the i2c master */ ic_con = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE | DW_IC_CON_RESTART_EN | DW_IC_CON_SPEED_FAST; - writel(ic_con, dev->base + DW_IC_CON); + dw_writel(dev, ic_con, DW_IC_CON); } /* @@ -338,7 +348,7 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) { int timeout = TIMEOUT; - while (readl(dev->base + DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { + while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) { if (timeout <= 0) { dev_warn(dev->dev, "timeout waiting for bus ready\n"); return -ETIMEDOUT; @@ -356,24 +366,24 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) u32 ic_con; /* Disable the adapter */ - writel(0, dev->base + DW_IC_ENABLE); + dw_writel(dev, 0, DW_IC_ENABLE); /* set the slave (target) address */ - writel(msgs[dev->msg_write_idx].addr, dev->base + DW_IC_TAR); + dw_writel(dev, msgs[dev->msg_write_idx].addr, DW_IC_TAR); /* if the slave address is ten bit address, enable 10BITADDR */ - ic_con = readl(dev->base + DW_IC_CON); + ic_con = dw_readl(dev, DW_IC_CON); if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) ic_con |= DW_IC_CON_10BITADDR_MASTER; else ic_con &= ~DW_IC_CON_10BITADDR_MASTER; - writel(ic_con, dev->base + DW_IC_CON); + dw_writel(dev, ic_con, DW_IC_CON); /* Enable the adapter */ - writel(1, dev->base + DW_IC_ENABLE); + dw_writel(dev, 1, DW_IC_ENABLE); /* Enable interrupts */ - writel(DW_IC_INTR_DEFAULT_MASK, dev->base + DW_IC_INTR_MASK); + dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK); } /* @@ -420,15 +430,15 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) buf_len = msgs[dev->msg_write_idx].len; } - tx_limit = dev->tx_fifo_depth - readl(dev->base + DW_IC_TXFLR); - rx_limit = dev->rx_fifo_depth - readl(dev->base + DW_IC_RXFLR); + tx_limit = dev->tx_fifo_depth - dw_readl(dev, DW_IC_TXFLR); + rx_limit = dev->rx_fifo_depth - dw_readl(dev, DW_IC_RXFLR); while (buf_len > 0 && tx_limit > 0 && rx_limit > 0) { if (msgs[dev->msg_write_idx].flags & I2C_M_RD) { - writel(0x100, dev->base + DW_IC_DATA_CMD); + dw_writel(dev, 0x100, DW_IC_DATA_CMD); rx_limit--; } else - writel(*buf++, dev->base + DW_IC_DATA_CMD); + dw_writel(dev, *buf++, DW_IC_DATA_CMD); tx_limit--; buf_len--; } @@ -453,7 +463,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev) if (dev->msg_err) intr_mask = 0; - writel(intr_mask, dev->base + DW_IC_INTR_MASK); + dw_writel(dev, intr_mask, DW_IC_INTR_MASK); } static void @@ -477,10 +487,10 @@ i2c_dw_read(struct dw_i2c_dev *dev) buf = dev->rx_buf; } - rx_valid = readl(dev->base + DW_IC_RXFLR); + rx_valid = dw_readl(dev, DW_IC_RXFLR); for (; len > 0 && rx_valid > 0; len--, rx_valid--) - *buf++ = readl(dev->base + DW_IC_DATA_CMD); + *buf++ = dw_readl(dev, DW_IC_DATA_CMD); if (len > 0) { dev->status |= STATUS_READ_IN_PROGRESS; @@ -563,7 +573,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) /* no error */ if (likely(!dev->cmd_err)) { /* Disable the adapter */ - writel(0, dev->base + DW_IC_ENABLE); + dw_writel(dev, 0, DW_IC_ENABLE); ret = num; goto done; } @@ -607,7 +617,7 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) * * The raw version might be useful for debugging purposes. */ - stat = readl(dev->base + DW_IC_INTR_STAT); + stat = dw_readl(dev, DW_IC_INTR_STAT); /* * Do not use the IC_CLR_INTR register to clear interrupts, or @@ -617,31 +627,31 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev) * Instead, use the separately-prepared IC_CLR_* registers. */ if (stat & DW_IC_INTR_RX_UNDER) - readl(dev->base + DW_IC_CLR_RX_UNDER); + dw_readl(dev, DW_IC_CLR_RX_UNDER); if (stat & DW_IC_INTR_RX_OVER) - readl(dev->base + DW_IC_CLR_RX_OVER); + dw_readl(dev, DW_IC_CLR_RX_OVER); if (stat & DW_IC_INTR_TX_OVER) - readl(dev->base + DW_IC_CLR_TX_OVER); + dw_readl(dev, DW_IC_CLR_TX_OVER); if (stat & DW_IC_INTR_RD_REQ) - readl(dev->base + DW_IC_CLR_RD_REQ); + dw_readl(dev, DW_IC_CLR_RD_REQ); if (stat & DW_IC_INTR_TX_ABRT) { /* * The IC_TX_ABRT_SOURCE register is cleared whenever * the IC_CLR_TX_ABRT is read. Preserve it beforehand. */ - dev->abort_source = readl(dev->base + DW_IC_TX_ABRT_SOURCE); - readl(dev->base + DW_IC_CLR_TX_ABRT); + dev->abort_source = dw_readl(dev, DW_IC_TX_ABRT_SOURCE); + dw_readl(dev, DW_IC_CLR_TX_ABRT); } if (stat & DW_IC_INTR_RX_DONE) - readl(dev->base + DW_IC_CLR_RX_DONE); + dw_readl(dev, DW_IC_CLR_RX_DONE); if (stat & DW_IC_INTR_ACTIVITY) - readl(dev->base + DW_IC_CLR_ACTIVITY); + dw_readl(dev, DW_IC_CLR_ACTIVITY); if (stat & DW_IC_INTR_STOP_DET) - readl(dev->base + DW_IC_CLR_STOP_DET); + dw_readl(dev, DW_IC_CLR_STOP_DET); if (stat & DW_IC_INTR_START_DET) - readl(dev->base + DW_IC_CLR_START_DET); + dw_readl(dev, DW_IC_CLR_START_DET); if (stat & DW_IC_INTR_GEN_CALL) - readl(dev->base + DW_IC_CLR_GEN_CALL); + dw_readl(dev, DW_IC_CLR_GEN_CALL); return stat; } @@ -666,7 +676,7 @@ static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id) * Anytime TX_ABRT is set, the contents of the tx/rx * buffers are flushed. Make sure to skip them. */ - writel(0, dev->base + DW_IC_INTR_MASK); + dw_writel(dev, 0, DW_IC_INTR_MASK); goto tx_aborted; } @@ -747,14 +757,14 @@ static int __devinit dw_i2c_probe(struct platform_device *pdev) goto err_unuse_clocks; } { - u32 param1 = readl(dev->base + DW_IC_COMP_PARAM_1); + u32 param1 = dw_readl(dev, DW_IC_COMP_PARAM_1); dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1; dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1; } i2c_dw_init(dev); - writel(0, dev->base + DW_IC_INTR_MASK); /* disable IRQ */ + dw_writel(dev, 0, DW_IC_INTR_MASK); /* disable IRQ */ r = request_irq(dev->irq, i2c_dw_isr, IRQF_DISABLED, pdev->name, dev); if (r) { dev_err(&pdev->dev, "failure requesting irq %i\n", dev->irq); @@ -810,7 +820,7 @@ static int __devexit dw_i2c_remove(struct platform_device *pdev) clk_put(dev->clk); dev->clk = NULL; - writel(0, dev->base + DW_IC_ENABLE); + dw_writel(dev, 0, DW_IC_ENABLE); free_irq(dev->irq, dev); kfree(dev); -- 1.7.3.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/