Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754765Ab1FMRXz (ORCPT ); Mon, 13 Jun 2011 13:23:55 -0400 Received: from e7.ny.us.ibm.com ([32.97.182.137]:34833 "EHLO e7.ny.us.ibm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753512Ab1FMRXt (ORCPT ); Mon, 13 Jun 2011 13:23:49 -0400 Date: Mon, 13 Jun 2011 10:23:44 -0700 From: "Paul E. McKenney" To: Wanlong Gao Cc: linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-kbuild@vger.kernel.org, linux-video@atrey.karlin.mff.cuni.cz, xiyoulinuxkernelgroup@googlegroups.com, linux-kernel@zh-kernel.org, Dipankar Sarma , Randy Dunlap , Nick Piggin , Karsten Keil , Michal Marek , James Bottomley , Martin Mares , Harry Wei , Chuck Lever , Trond Myklebust , Thomas Weber , Mike Frysinger , Jiri Kosina , "Justin P. Mattock" Subject: Re: [PATCH] Documentation:change all arch/i386 to arch/x86 in Documentation Message-ID: <20110613172344.GC2272@linux.vnet.ibm.com> Reply-To: paulmck@linux.vnet.ibm.com References: <1307942898-3728-1-git-send-email-wanlong.gao@gmail.com> MIME-Version: 1.0 Content-Type: text/plain; charset=us-ascii Content-Disposition: inline In-Reply-To: <1307942898-3728-1-git-send-email-wanlong.gao@gmail.com> User-Agent: Mutt/1.5.20 (2009-06-14) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17102 Lines: 388 On Mon, Jun 13, 2011 at 01:28:18PM +0800, Wanlong Gao wrote: > From: Wanlong Gao > > Change all "arch/i386" to "arch/x86" in Documentaion/, > since the directory has changed. > > Signed-off-by: Wanlong Gao I have queued the Documentation/RCU/NMI-RCU.txt hunk with your Signed-off-by, thank you! Thanx, Paul > --- > Documentation/RCU/NMI-RCU.txt | 4 +- > Documentation/blockdev/README.DAC960 | 2 +- > Documentation/blockdev/ramdisk.txt | 8 +++--- > Documentation/cpu-freq/cpu-drivers.txt | 2 +- > Documentation/filesystems/nfs/nfsroot.txt | 2 +- > Documentation/isdn/README.HiSax | 2 +- > Documentation/kbuild/makefiles.txt | 38 ++++++++++++++-------------- > Documentation/magic-number.txt | 2 +- > Documentation/mca.txt | 6 ++-- > Documentation/scheduler/sched-arch.txt | 2 +- > Documentation/scsi/BusLogic.txt | 2 +- > Documentation/serial/computone.txt | 2 +- > Documentation/svga.txt | 2 +- > Documentation/zh_CN/magic-number.txt | 2 +- > 14 files changed, 38 insertions(+), 38 deletions(-) > > diff --git a/Documentation/RCU/NMI-RCU.txt b/Documentation/RCU/NMI-RCU.txt > index a8536cb..bf82851 100644 > --- a/Documentation/RCU/NMI-RCU.txt > +++ b/Documentation/RCU/NMI-RCU.txt > @@ -5,8 +5,8 @@ Although RCU is usually used to protect read-mostly data structures, > it is possible to use RCU to provide dynamic non-maskable interrupt > handlers, as well as dynamic irq handlers. This document describes > how to do this, drawing loosely from Zwane Mwaikambo's NMI-timer > -work in "arch/i386/oprofile/nmi_timer_int.c" and in > -"arch/i386/kernel/traps.c". > +work in "arch/x86/oprofile/nmi_timer_int.c" and in > +"arch/x86/kernel/traps.c". > > The relevant pieces of code are listed below, each followed by a > brief explanation. > diff --git a/Documentation/blockdev/README.DAC960 b/Documentation/blockdev/README.DAC960 > index 0e8f618..bd85fb9 100644 > --- a/Documentation/blockdev/README.DAC960 > +++ b/Documentation/blockdev/README.DAC960 > @@ -214,7 +214,7 @@ replacing "/usr/src" with wherever you keep your Linux kernel source tree: > make config > make bzImage (or zImage) > > -Then install "arch/i386/boot/bzImage" or "arch/i386/boot/zImage" as your > +Then install "arch/x86/boot/bzImage" or "arch/x86/boot/zImage" as your > standard kernel, run lilo if appropriate, and reboot. > > To create the necessary devices in /dev, the "make_rd" script included in > diff --git a/Documentation/blockdev/ramdisk.txt b/Documentation/blockdev/ramdisk.txt > index 6c820ba..fa72e97 100644 > --- a/Documentation/blockdev/ramdisk.txt > +++ b/Documentation/blockdev/ramdisk.txt > @@ -64,9 +64,9 @@ the RAM disk dynamically grows as data is being written into it, a size field > is not required. Bits 11 to 13 are not currently used and may as well be zero. > These numbers are no magical secrets, as seen below: > > -./arch/i386/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF > -./arch/i386/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 > -./arch/i386/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 > +./arch/x86/kernel/setup.c:#define RAMDISK_IMAGE_START_MASK 0x07FF > +./arch/x86/kernel/setup.c:#define RAMDISK_PROMPT_FLAG 0x8000 > +./arch/x86/kernel/setup.c:#define RAMDISK_LOAD_FLAG 0x4000 > > Consider a typical two floppy disk setup, where you will have the > kernel on disk one, and have already put a RAM disk image onto disk #2. > @@ -85,7 +85,7 @@ The command line equivalent is: "prompt_ramdisk=1" > Putting that together gives 2^15 + 2^14 + 0 = 49152 for an rdev word. > So to create disk one of the set, you would do: > > - /usr/src/linux# cat arch/i386/boot/zImage > /dev/fd0 > + /usr/src/linux# cat arch/x86/boot/zImage > /dev/fd0 > /usr/src/linux# rdev /dev/fd0 /dev/fd0 > /usr/src/linux# rdev -r /dev/fd0 49152 > > diff --git a/Documentation/cpu-freq/cpu-drivers.txt b/Documentation/cpu-freq/cpu-drivers.txt > index 6c30e93..ed07e4f 100644 > --- a/Documentation/cpu-freq/cpu-drivers.txt > +++ b/Documentation/cpu-freq/cpu-drivers.txt > @@ -168,7 +168,7 @@ in-chipset dynamic frequency switching to policy->min, the upper limit > to policy->max, and -if supported- select a performance-oriented > setting when policy->policy is CPUFREQ_POLICY_PERFORMANCE, and a > powersaving-oriented setting when CPUFREQ_POLICY_POWERSAVE. Also check > -the reference implementation in arch/i386/kernel/cpu/cpufreq/longrun.c > +the reference implementation in arch/x86/kernel/cpu/cpufreq/longrun.c > > > > diff --git a/Documentation/filesystems/nfs/nfsroot.txt b/Documentation/filesystems/nfs/nfsroot.txt > index 90c71c6..ffdd9d8 100644 > --- a/Documentation/filesystems/nfs/nfsroot.txt > +++ b/Documentation/filesystems/nfs/nfsroot.txt > @@ -226,7 +226,7 @@ They depend on various facilities being available: > cdrecord. > > e.g. > - cdrecord dev=ATAPI:1,0,0 arch/i386/boot/image.iso > + cdrecord dev=ATAPI:1,0,0 arch/x86/boot/image.iso > > For more information on isolinux, including how to create bootdisks > for prebuilt kernels, see http://syslinux.zytor.com/ > diff --git a/Documentation/isdn/README.HiSax b/Documentation/isdn/README.HiSax > index 99e87a6..b1a573c 100644 > --- a/Documentation/isdn/README.HiSax > +++ b/Documentation/isdn/README.HiSax > @@ -506,7 +506,7 @@ to e.g. the Internet: > > make clean; make zImage; make modules; make modules_install > 2. Install the new kernel > - cp /usr/src/linux/arch/i386/boot/zImage /etc/kernel/linux.isdn > + cp /usr/src/linux/arch/x86/boot/zImage /etc/kernel/linux.isdn > vi /etc/lilo.conf > > lilo > diff --git a/Documentation/kbuild/makefiles.txt b/Documentation/kbuild/makefiles.txt > index 47435e5..f47cdef 100644 > --- a/Documentation/kbuild/makefiles.txt > +++ b/Documentation/kbuild/makefiles.txt > @@ -441,7 +441,7 @@ more details, with real examples. > specified if first option are not supported. > > Example: > - #arch/i386/kernel/Makefile > + #arch/x86/kernel/Makefile > vsyscall-flags += $(call cc-ldoption, -Wl$(comma)--hash-style=sysv) > > In the above example, vsyscall-flags will be assigned the option > @@ -460,7 +460,7 @@ more details, with real examples. > supported to use an optional second option. > > Example: > - #arch/i386/Makefile > + #arch/x86/Makefile > cflags-y += $(call cc-option,-march=pentium-mmx,-march=i586) > > In the above example, cflags-y will be assigned the option > @@ -522,7 +522,7 @@ more details, with real examples. > even though the option was accepted by gcc. > > Example: > - #arch/i386/Makefile > + #arch/x86/Makefile > cflags-y += $(shell \ > if [ $(call cc-version) -ge 0300 ] ; then \ > echo "-mregparm=3"; fi ;) > @@ -802,7 +802,7 @@ but in the architecture makefiles where the kbuild infrastructure > is not sufficient this sometimes needs to be explicit. > > Example: > - #arch/i386/boot/Makefile > + #arch/x86/boot/Makefile > subdir- := compressed/ > > The above assignment instructs kbuild to descend down in the > @@ -812,12 +812,12 @@ To support the clean infrastructure in the Makefiles that builds the > final bootimage there is an optional target named archclean: > > Example: > - #arch/i386/Makefile > + #arch/x86/Makefile > archclean: > - $(Q)$(MAKE) $(clean)=arch/i386/boot > + $(Q)$(MAKE) $(clean)=arch/x86/boot > > -When "make clean" is executed, make will descend down in arch/i386/boot, > -and clean as usual. The Makefile located in arch/i386/boot/ may use > +When "make clean" is executed, make will descend down in arch/x86/boot, > +and clean as usual. The Makefile located in arch/x86/boot/ may use > the subdir- trick to descend further down. > > Note 1: arch/$(ARCH)/Makefile cannot use "subdir-", because that file is > @@ -882,7 +882,7 @@ When kbuild executes, the following steps are followed (roughly): > LDFLAGS_vmlinux uses the LDFLAGS_$@ support. > > Example: > - #arch/i386/Makefile > + #arch/x86/Makefile > LDFLAGS_vmlinux := -e stext > > OBJCOPYFLAGS objcopy flags > @@ -920,14 +920,14 @@ When kbuild executes, the following steps are followed (roughly): > Often, the KBUILD_CFLAGS variable depends on the configuration. > > Example: > - #arch/i386/Makefile > + #arch/x86/Makefile > cflags-$(CONFIG_M386) += -march=i386 > KBUILD_CFLAGS += $(cflags-y) > > Many arch Makefiles dynamically run the target C compiler to > probe supported options: > > - #arch/i386/Makefile > + #arch/x86/Makefile > > ... > cflags-$(CONFIG_MPENTIUMII) += $(call cc-option,\ > @@ -1038,8 +1038,8 @@ When kbuild executes, the following steps are followed (roughly): > into the arch/$(ARCH)/boot/Makefile. > > Example: > - #arch/i386/Makefile > - boot := arch/i386/boot > + #arch/x86/Makefile > + boot := arch/x86/boot > bzImage: vmlinux > $(Q)$(MAKE) $(build)=$(boot) $(boot)/$@ > > @@ -1051,7 +1051,7 @@ When kbuild executes, the following steps are followed (roughly): > To support this, $(archhelp) must be defined. > > Example: > - #arch/i386/Makefile > + #arch/x86/Makefile > define archhelp > echo '* bzImage - Image (arch/$(ARCH)/boot/bzImage)' > endif > @@ -1065,7 +1065,7 @@ When kbuild executes, the following steps are followed (roughly): > from vmlinux. > > Example: > - #arch/i386/Makefile > + #arch/x86/Makefile > all: bzImage > > When "make" is executed without arguments, bzImage will be built. > @@ -1083,7 +1083,7 @@ When kbuild executes, the following steps are followed (roughly): > 2) kbuild knows what files to delete during "make clean" > > Example: > - #arch/i386/kernel/Makefile > + #arch/x86/kernel/Makefile > extra-y := head.o init_task.o > > In this example, extra-y is used to list object files that > @@ -1133,7 +1133,7 @@ When kbuild executes, the following steps are followed (roughly): > Compress target. Use maximum compression to compress target. > > Example: > - #arch/i386/boot/Makefile > + #arch/x86/boot/Makefile > LDFLAGS_bootsect := -Ttext 0x0 -s --oformat binary > LDFLAGS_setup := -Ttext 0x0 -s --oformat binary -e begtext > > @@ -1193,7 +1193,7 @@ When kbuild executes, the following steps are followed (roughly): > > When updating the $(obj)/bzImage target, the line > > - BUILD arch/i386/boot/bzImage > + BUILD arch/x86/boot/bzImage > > will be displayed with "make KBUILD_VERBOSE=0". > > @@ -1207,7 +1207,7 @@ When kbuild executes, the following steps are followed (roughly): > kbuild knows .lds files and includes a rule *lds.S -> *lds. > > Example: > - #arch/i386/kernel/Makefile > + #arch/x86/kernel/Makefile > always := vmlinux.lds > > #Makefile > diff --git a/Documentation/magic-number.txt b/Documentation/magic-number.txt > index 4b12abc..20ec3d9 100644 > --- a/Documentation/magic-number.txt > +++ b/Documentation/magic-number.txt > @@ -66,7 +66,7 @@ MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h > RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h > SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h > HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c > -APM_BIOS_MAGIC 0x4101 apm_user arch/i386/kernel/apm.c > +APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm.c > CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h > DB_MAGIC 0x4442 fc_info drivers/net/iph5526_novram.c > DL_MAGIC 0x444d fc_info drivers/net/iph5526_novram.c > diff --git a/Documentation/mca.txt b/Documentation/mca.txt > index 510375d..cf8fd39 100644 > --- a/Documentation/mca.txt > +++ b/Documentation/mca.txt > @@ -3,7 +3,7 @@ i386 Micro Channel Architecture Support > > MCA support is enabled using the CONFIG_MCA define. A machine with a MCA > bus will have the kernel variable MCA_bus set, assuming the BIOS feature > -bits are set properly (see arch/i386/boot/setup.S for information on > +bits are set properly (see arch/x86/boot/setup.S for information on > how this detection is done). > > Adapter Detection > @@ -11,7 +11,7 @@ Adapter Detection > > The ideal MCA adapter detection is done through the use of the > Programmable Option Select registers. Generic functions for doing > -this have been added in include/linux/mca.h and arch/i386/kernel/mca.c. > +this have been added in include/linux/mca.h and arch/x86/kernel/mca.c. > Everything needed to detect adapters and read (and write) configuration > information is there. A number of MCA-specific drivers already use > this. The typical probe code looks like the following: > @@ -81,7 +81,7 @@ more people use shared IRQs on PCI machines. > In general, an interrupt must be acknowledged not only at the ICU (which > is done automagically by the kernel), but at the device level. In > particular, IRQ 0 must be reset after a timer interrupt (now done in > -arch/i386/kernel/time.c) or the first timer interrupt hangs the system. > +arch/x86/kernel/time.c) or the first timer interrupt hangs the system. > There were also problems with the 1.3.x floppy drivers, but that seems > to have been fixed. > > diff --git a/Documentation/scheduler/sched-arch.txt b/Documentation/scheduler/sched-arch.txt > index d43dbcb..28aa107 100644 > --- a/Documentation/scheduler/sched-arch.txt > +++ b/Documentation/scheduler/sched-arch.txt > @@ -66,7 +66,7 @@ Your cpu_idle routines need to obey the following rules: > barrier issued (followed by a test of need_resched with > interrupts disabled, as explained in 3). > > -arch/i386/kernel/process.c has examples of both polling and > +arch/x86/kernel/process.c has examples of both polling and > sleeping idle functions. > > > diff --git a/Documentation/scsi/BusLogic.txt b/Documentation/scsi/BusLogic.txt > index d7fbc94..48e982c 100644 > --- a/Documentation/scsi/BusLogic.txt > +++ b/Documentation/scsi/BusLogic.txt > @@ -553,7 +553,7 @@ replacing "/usr/src" with wherever you keep your Linux kernel source tree: > make config > make zImage > > -Then install "arch/i386/boot/zImage" as your standard kernel, run lilo if > +Then install "arch/x86/boot/zImage" as your standard kernel, run lilo if > appropriate, and reboot. > > > diff --git a/Documentation/serial/computone.txt b/Documentation/serial/computone.txt > index c57ea47..60a6f65 100644 > --- a/Documentation/serial/computone.txt > +++ b/Documentation/serial/computone.txt > @@ -87,7 +87,7 @@ c) Set address on ISA cards then: > edit /usr/src/linux/drivers/char/ip2.c > (Optional - may be specified on kernel command line now) > d) Run "make zImage" or whatever target you prefer. > -e) mv /usr/src/linux/arch/i386/boot/zImage to /boot. > +e) mv /usr/src/linux/arch/x86/boot/zImage to /boot. > f) Add new config for this kernel into /etc/lilo.conf, run "lilo" > or copy to a floppy disk and boot from that floppy disk. > g) Reboot using this kernel > diff --git a/Documentation/svga.txt b/Documentation/svga.txt > index cd66ec8..e5da082 100644 > --- a/Documentation/svga.txt > +++ b/Documentation/svga.txt > @@ -150,7 +150,7 @@ end of the display. > > 4. Options > ~~~~~~~~~~ > - Some options can be set in the source text (in arch/i386/boot/video.S). > + Some options can be set in the source text (in arch/x86/boot/video.S). > All of them are simple #define's -- change them to #undef's when you want to > switch them off. Currently supported: > > diff --git a/Documentation/zh_CN/magic-number.txt b/Documentation/zh_CN/magic-number.txt > index 4c4ce85..a9e6fdd 100644 > --- a/Documentation/zh_CN/magic-number.txt > +++ b/Documentation/zh_CN/magic-number.txt > @@ -66,7 +66,7 @@ MKISS_DRIVER_MAGIC 0x04bf mkiss_channel drivers/net/mkiss.h > RISCOM8_MAGIC 0x0907 riscom_port drivers/char/riscom8.h > SPECIALIX_MAGIC 0x0907 specialix_port drivers/char/specialix_io8.h > HDLC_MAGIC 0x239e n_hdlc drivers/char/n_hdlc.c > -APM_BIOS_MAGIC 0x4101 apm_user arch/i386/kernel/apm.c > +APM_BIOS_MAGIC 0x4101 apm_user arch/x86/kernel/apm.c > CYCLADES_MAGIC 0x4359 cyclades_port include/linux/cyclades.h > DB_MAGIC 0x4442 fc_info drivers/net/iph5526_novram.c > DL_MAGIC 0x444d fc_info drivers/net/iph5526_novram.c > -- > 1.7.4.1 > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/