Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754326Ab1FNCWF (ORCPT ); Mon, 13 Jun 2011 22:22:05 -0400 Received: from wolverine02.qualcomm.com ([199.106.114.251]:1718 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754042Ab1FNCV7 (ORCPT ); Mon, 13 Jun 2011 22:21:59 -0400 X-IronPort-AV: E=McAfee;i="5400,1158,6376"; a="97314426" From: Kenneth Heitke To: khali@linux-fr.org, ben-linux@fluff.org, davidb@codeaurora.org, dwalker@fifo99.com Cc: linux-arm-msm@vger.kernel.org, bryanh@codeaurora.org, tsoni@codeaurora.org, arve@android.com, swetland@google.com, sdharia@codeaurora.org, linux-arm-kernel@lists.infradead.org, Kenneth Heitke , seth.heasley@intel.com, tomoya-linux@dsn.okisemi.com, guenter.roeck@ericsson.com, linus.walleij@stericsson.com, w.sang@pengutronix.de, linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2] i2c: QUP based bus driver for Qualcomm MSM chipsets Date: Mon, 13 Jun 2011 20:21:53 -0600 Message-Id: <1308018114-19709-1-git-send-email-kheitke@codeaurora.org> X-Mailer: git-send-email 1.7.3.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 36575 Lines: 1275 This bus driver supports the QUP i2c hardware controller in the Qualcomm MSM SOCs. The Qualcomm Universal Peripheral Engine (QUP) is a general purpose data path engine with input/output FIFOs and an embedded i2c mini-core. The driver supports FIFO mode (for low bandwidth applications) and block mode (interrupt generated for each block-size data transfer). The driver currently does not support DMA transfers. Signed-off-by: Kenneth Heitke --- v2: updates to runtime PM calls (addresses comments from Mark Brown). Disable interrupts before setting completion object to NULL (bug fix). --- drivers/i2c/busses/Kconfig | 11 + drivers/i2c/busses/Makefile | 1 + drivers/i2c/busses/i2c-qup.c | 1175 +++++++++++++++++++++++++++++ include/linux/platform_data/msm_qup_i2c.h | 24 + 4 files changed, 1211 insertions(+), 0 deletions(-) create mode 100644 drivers/i2c/busses/i2c-qup.c create mode 100644 include/linux/platform_data/msm_qup_i2c.h diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 326652f..ecf0896 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -564,6 +564,17 @@ config I2C_PXA_SLAVE is necessary for systems where the PXA may be a target on the I2C bus. +config I2C_QUP + tristate "Qualcomm MSM QUP I2C Controller" + depends on ARCH_MSM + help + If you say yes to this option, support will be included for the + built-in QUP I2C interface on Qualcomm MSM family processors. + + The Qualcomm Universal Peripheral Engine (QUP) is a general + purpose data path engine with input/output FIFOs and an + embedded I2C mini-core. + config HAVE_S3C2410_I2C bool help diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index e6cf294..0516104 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -55,6 +55,7 @@ obj-$(CONFIG_I2C_PNX) += i2c-pnx.o obj-$(CONFIG_I2C_PUV3) += i2c-puv3.o obj-$(CONFIG_I2C_PXA) += i2c-pxa.o obj-$(CONFIG_I2C_PXA_PCI) += i2c-pxa-pci.o +obj-$(CONFIG_I2C_QUP) += i2c-qup.o obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o obj-$(CONFIG_I2C_S6000) += i2c-s6000.o obj-$(CONFIG_I2C_SH7760) += i2c-sh7760.o diff --git a/drivers/i2c/busses/i2c-qup.c b/drivers/i2c/busses/i2c-qup.c new file mode 100644 index 0000000..cb472a0 --- /dev/null +++ b/drivers/i2c/busses/i2c-qup.c @@ -0,0 +1,1175 @@ +/* Copyright (c) 2010-2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* QUP Registers */ +enum qup_registers { + QUP_CONFIG = 0x0, + QUP_STATE = 0x4, + QUP_IO_MODE = 0x8, + QUP_SW_RESET = 0xC, + QUP_OPERATIONAL = 0x18, + QUP_ERROR_FLAGS = 0x1C, + QUP_ERROR_FLAGS_EN = 0x20, + QUP_MX_READ_CNT = 0x208, + QUP_MX_INPUT_CNT = 0x200, + QUP_MX_WR_CNT = 0x100, + QUP_OUT_DEBUG = 0x108, + QUP_OUT_FIFO_CNT = 0x10C, + QUP_OUT_FIFO_BASE = 0x110, + QUP_IN_READ_CUR = 0x20C, + QUP_IN_DEBUG = 0x210, + QUP_IN_FIFO_CNT = 0x214, + QUP_IN_FIFO_BASE = 0x218, + QUP_I2C_CLK_CTL = 0x400, + QUP_I2C_STATUS = 0x404, +}; + +/* QUP States and reset values */ +enum qup_state { + QUP_RESET_STATE = 0, + QUP_RUN_STATE = 1U, + QUP_STATE_MASK = 3U, + QUP_PAUSE_STATE = 3U, + QUP_STATE_VALID = 1U << 2, + QUP_I2C_MAST_GEN = 1U << 4, + QUP_OPERATIONAL_RESET = 0xFF0, + QUP_I2C_STATUS_RESET = 0xFFFFFC, +}; + +/* QUP OPERATIONAL FLAGS */ +enum qup_operational { + QUP_OUT_SVC_FLAG = 1U << 8, + QUP_IN_SVC_FLAG = 1U << 9, + QUP_MX_INPUT_DONE = 1U << 11, +}; + +/* I2C mini core related values */ +enum qup_config { + I2C_MINI_CORE = 2U << 8, + I2C_N_VAL = 0xF, +}; + +/* Packing Unpacking words in FIFOs, and IO modes */ +#define QUP_OUTPUT_FIFO_SIZE_SHIFT 2 +#define QUP_INPUT_BLK_SIZE_SHIFT 5 +#define QUP_INPUT_FIFO_SIZE_SHIFT 7 + +enum qup_io_modes { + QUP_OUTPUT_BLK_SIZE = 3U, + QUP_OUTPUT_FIFO_SIZE = 7U << QUP_OUTPUT_FIFO_SIZE_SHIFT, + QUP_INPUT_BLK_SIZE = 3U << QUP_INPUT_BLK_SIZE_SHIFT, + QUP_INPUT_FIFO_SIZE = 7U << QUP_INPUT_FIFO_SIZE_SHIFT, + QUP_WR_BLK_MODE = 1U << 10, + QUP_RD_BLK_MODE = 1U << 12, + QUP_UNPACK_EN = 1U << 14, + QUP_PACK_EN = 1U << 15, +}; + +/* QUP tags */ +enum qup_tags { + QUP_OUT_NOP = 0, + QUP_OUT_START = 1U << 8, + QUP_OUT_DATA = 2U << 8, + QUP_OUT_STOP = 3U << 8, + QUP_OUT_REC = 4U << 8, + QUP_IN_DATA = 5U << 8, + QUP_IN_STOP = 6U << 8, + QUP_IN_NACK = 7U << 8, +}; + +/* Status, Error flags */ +enum qup_status { + I2C_STATUS_WR_BUFFER_FULL = 1U << 0, + I2C_STATUS_BUS_ACTIVE = 1U << 8, + I2C_STATUS_ERROR_MASK = 0x38000FC, + QUP_I2C_NACK_FLAG = 1U << 3, + QUP_IN_NOT_EMPTY = 1U << 5, + QUP_STATUS_ERROR_FLAGS = 0x7C, +}; + +/* GSBI Control Register */ +enum gsbi_ctrl_reg { + GSBI_I2C_PROTOCOL_CODE = 0x2 << 4, /* I2C protocol */ +}; + +/* I2C Master clock control */ +#define QUP_CLK_CTL_FS_DIVIDER_MASK 0xff +#define QUP_CLK_CTL_HS_DIVIDER_SHIFT 0x08 +#define QUP_CLK_CTL_HS_DIVIDER_MASK 0x07 +#define QUP_CLK_CTL_HS_DIVIDER_MIN 0x03 + +#define QUP_MAX_RETRIES 2000 +#define QUP_SRC_CLK_RATE 19200000 /* Default source clock rate */ +#define QUP_AUTOSUSPEND_DELAY (3*MSEC_PER_SEC) + +/** + * struct qup_i2c_dev + * @dev: parent platform device. + * @base: location of QUP controller I/O area in memory. + * @gsbi: location of QUP GSBI block I/O area in memory. + * @in_irq: assigned interrupt line for input interrupts. + * @out_irq: assigned interrupt line for output interrupts. + * @err_irq: assigned interrupt line for error interrupts. + * @num_irqs: the number of supported interrupt lines (usually 1 or 3). + * @clk: the I2C master clock (the I2C bus clock is derived from this clock). + * @pclk: hardware core clock. Needs to be enabled to access the QUP registers. + * @adapter: corresponding I2C adapter. + * @msg: the current i2c_msg segment being processed. + * @pos: the current position (index) into the message buffer. + * @cnt: the number of bytes remaining to be transferred in the current segment. + * @err: error status reported from the interrupt handler. + * @clk_ctl: clock control (clock divider values). A non-zero value indicates + * that the clocks have been initialized. + * @one_bit_t: calculated time (in usecs) to transfer one bit of data on + * the I2C bus (used, as necesary, for delay loops). + * @out_fifo_sz: the QUP output FIFO size (in bytes). + * @in_fifo_sz: the QUP input FIFO size (in bytes). + * @out_blk_sz: the QUP output block size (in bytes). + * @in_blk_sz: the QUP input block size (in bytes). + * @wr_sz: max bytes to write (either output FIFO size or output block size). + * @pdata: platform data. + * @suspended: the suspend state. + * @mlock: mutex used to protect this struct. + * @complete: completion function to signal the end of an i2c_msg transfer. + * + * Early QUP controller used three separate interrupt lines for input, output, + * and error interrupts. Later versions share a single interrupt line. + * The num_irq field indicates whether or not there is a shared interrupt line. + */ + +struct qup_i2c_dev { + struct device *dev; + void __iomem *base; /* virtual */ + void __iomem *gsbi; /* virtual */ + int in_irq; + int out_irq; + int err_irq; + int num_irqs; + struct clk *clk; + struct clk *pclk; + struct i2c_adapter adapter; + struct i2c_msg *msg; + int pos; + int cnt; + int err; + int clk_ctl; + int one_bit_t; + int out_fifo_sz; + int in_fifo_sz; + int out_blk_sz; + int in_blk_sz; + int wr_sz; + struct msm_qup_i2c_platform_data *pdata; + int suspended; + struct mutex mlock; + void *complete; +}; + +#ifdef DEBUG +static void +qup_print_status(struct qup_i2c_dev *dev) +{ + uint32_t val; + val = readl(dev->base + QUP_CONFIG); + dev_dbg(dev->dev, "Qup config is :0x%x\n", val); + val = readl(dev->base + QUP_STATE); + dev_dbg(dev->dev, "Qup state is :0x%x\n", val); + val = readl(dev->base + QUP_IO_MODE); + dev_dbg(dev->dev, "Qup mode is :0x%x\n", val); +} +#else +static inline void qup_print_status(struct qup_i2c_dev *dev) +{ +} +#endif + +static inline void qup_i2c_clk_enable(struct qup_i2c_dev *dev) +{ + dev_dbg(dev->dev, "%s\n", __func__); + + clk_enable(dev->clk); + clk_enable(dev->pclk); +} + +static inline void qup_i2c_clk_disable(struct qup_i2c_dev *dev) +{ + dev_dbg(dev->dev, "%s\n", __func__); + + clk_disable(dev->clk); + clk_disable(dev->pclk); +} + +static irqreturn_t +qup_i2c_interrupt(int irq, void *devid) +{ + struct qup_i2c_dev *dev = devid; + uint32_t status = readl(dev->base + QUP_I2C_STATUS); + uint32_t errors = readl(dev->base + QUP_ERROR_FLAGS); + uint32_t op_flgs = readl(dev->base + QUP_OPERATIONAL); + int err = 0; + + if (!dev->msg || !dev->complete) { + /* Clear Error interrupt if it's a level triggered interrupt */ + if (dev->num_irqs == 1) + writel(QUP_RESET_STATE, dev->base + QUP_STATE); + return IRQ_HANDLED; + } + + if (status & I2C_STATUS_ERROR_MASK) { + dev_dbg(dev->dev, "QUP: I2C status flags :0x%x, irq:%d\n", + status, irq); + err = status; + /* Clear Error interrupt if it's a level triggered interrupt */ + if (dev->num_irqs == 1) + writel(QUP_RESET_STATE, dev->base + QUP_STATE); + goto intr_done; + } + + if (errors & QUP_STATUS_ERROR_FLAGS) { + dev_dbg(dev->dev, "QUP: QUP status flags :0x%x\n", errors); + err = -errors; + /* Clear Error interrupt if it's a level triggered interrupt */ + if (dev->num_irqs == 1) + writel(errors & QUP_STATUS_ERROR_FLAGS, + dev->base + QUP_ERROR_FLAGS); + goto intr_done; + } + + if ((dev->num_irqs == 3) && (dev->msg->flags == I2C_M_RD) + && (irq == dev->out_irq)) + return IRQ_HANDLED; + if (op_flgs & QUP_OUT_SVC_FLAG) + writel(QUP_OUT_SVC_FLAG, dev->base + QUP_OPERATIONAL); + if (dev->msg->flags == I2C_M_RD) { + if ((op_flgs & QUP_MX_INPUT_DONE) || + (op_flgs & QUP_IN_SVC_FLAG)) + writel(QUP_IN_SVC_FLAG, dev->base + QUP_OPERATIONAL); + else + return IRQ_HANDLED; + } + +intr_done: + dev_dbg(dev->dev, "QUP intr= %d, i2c status=0x%x, qup status = 0x%x\n", + irq, status, errors); + qup_print_status(dev); + dev->err = err; + complete(dev->complete); + return IRQ_HANDLED; +} + +static int +qup_i2c_poll_writeready(struct qup_i2c_dev *dev, int rem) +{ + uint32_t retries = 0; + + while (retries != QUP_MAX_RETRIES) { + uint32_t status = readl(dev->base + QUP_I2C_STATUS); + + if (!(status & I2C_STATUS_WR_BUFFER_FULL)) { + if (((dev->msg->flags & I2C_M_RD) || (rem == 0)) && + !(status & I2C_STATUS_BUS_ACTIVE)) + return 0; + else if ((dev->msg->flags == 0) && (rem > 0)) + return 0; + else /* 1-bit delay before we check for bus busy */ + udelay(dev->one_bit_t); + } + if (retries++ == 1000) + udelay(100); + } + qup_print_status(dev); + return -ETIMEDOUT; +} + +static int +qup_i2c_poll_state(struct qup_i2c_dev *dev, uint32_t state) +{ + uint32_t retries = 0; + + dev_dbg(dev->dev, "Polling Status for state:0x%x\n", state); + + while (retries != QUP_MAX_RETRIES) { + uint32_t status = readl(dev->base + QUP_STATE); + + if ((status & (QUP_STATE_VALID | state)) == + (QUP_STATE_VALID | state)) + return 0; + else if (retries++ == 1000) + udelay(100); + } + return -ETIMEDOUT; +} + +#ifdef DEBUG +static void qup_print_fifo_entry(struct qup_i2c_dev *dev, uint32_t val, + uint32_t offset, int rdwr) +{ + if (rdwr) + dev_dbg(dev->dev, "RD:Wrote 0x%x to out_ff:0x%p\n", + val, dev->base + QUP_OUT_FIFO_BASE + offset); + else + dev_dbg(dev->dev, "WR:Wrote 0x%x to out_ff:0x%p\n", + val, dev->base + QUP_OUT_FIFO_BASE + offset); +} +#else +static inline void qup_print_fifo_entry(struct qup_i2c_dev *dev, uint32_t val, + uint32_t offset, int rdwr) +{ +} +#endif + +static void +qup_issue_read(struct qup_i2c_dev *dev, struct i2c_msg *msg, int *idx, + uint32_t carry_over) +{ + uint16_t addr = (msg->addr << 1) | 1; + /* + * QUP limit 256 bytes per read. By HW design, 0 in the 8-bit field + * is treated as 256 byte read. + */ + uint16_t rd_len = ((dev->cnt == 256) ? 0 : dev->cnt); + + if (*idx % 4) { + writel(carry_over | ((QUP_OUT_START | addr) << 16), + dev->base + QUP_OUT_FIFO_BASE); + + qup_print_fifo_entry(dev, carry_over | + ((QUP_OUT_START | addr) << 16), *idx - 2, 1); + writel((QUP_OUT_REC | rd_len), + dev->base + QUP_OUT_FIFO_BASE); + + qup_print_fifo_entry(dev, (QUP_OUT_REC | rd_len), *idx + 2, 1); + } else { + writel(((QUP_OUT_REC | rd_len) << 16) | QUP_OUT_START | addr, + dev->base + QUP_OUT_FIFO_BASE); + + qup_print_fifo_entry(dev, QUP_OUT_REC << 16 | rd_len << 16 | + QUP_OUT_START | addr, *idx, 1); + } + *idx += 4; +} + +static void +qup_issue_write(struct qup_i2c_dev *dev, struct i2c_msg *msg, int rem, + int *idx, uint32_t *carry_over) +{ + int entries = dev->cnt; + int empty_sl = dev->wr_sz - ((*idx) >> 1); + int i = 0; + uint32_t val = 0; + uint32_t last_entry = 0; + uint16_t addr = msg->addr << 1; + + if (dev->pos == 0) { + if (*idx % 4) { + writel(*carry_over | ((QUP_OUT_START | addr) << 16), + dev->base + QUP_OUT_FIFO_BASE); + + qup_print_fifo_entry(dev, + *carry_over | QUP_OUT_START << 16 | + addr << 16, *idx - 2, 0); + } else + val = QUP_OUT_START | addr; + *idx += 2; + i++; + entries++; + } else { + /* + * Avoid setup time issue by adding 1 NOP when number of bytes + * are more than FIFO/BLOCK size. setup time issue can't appear + * otherwise since next byte to be written will always be ready + */ + val = (QUP_OUT_NOP | 1); + *idx += 2; + i++; + entries++; + } + if (entries > empty_sl) + entries = empty_sl; + + for (; i < (entries - 1); i++) { + if (*idx % 4) { + writel(val | ((QUP_OUT_DATA | + msg->buf[dev->pos]) << 16), + dev->base + QUP_OUT_FIFO_BASE); + + qup_print_fifo_entry(dev, val | QUP_OUT_DATA << 16 | + msg->buf[dev->pos] << 16, *idx - 2, 0); + } else + val = QUP_OUT_DATA | msg->buf[dev->pos]; + (*idx) += 2; + dev->pos++; + } + if (dev->pos < (msg->len - 1)) + last_entry = QUP_OUT_DATA; + else if (rem > 1) /* not last array entry */ + last_entry = QUP_OUT_DATA; + else + last_entry = QUP_OUT_STOP; + if ((*idx % 4) == 0) { + /* + * If read-start and read-command end up in different fifos, it + * may result in extra-byte being read due to extra-read cycle. + * Avoid that by inserting NOP as the last entry of fifo only + * if write command(s) leave 1 space in fifo. + */ + if (rem > 1) { + struct i2c_msg *next = msg + 1; + if (next->addr == msg->addr && (next->flags | I2C_M_RD) + && *idx == ((dev->wr_sz*2) - 4)) { + writel(((last_entry | msg->buf[dev->pos]) | + ((1 | QUP_OUT_NOP) << 16)), dev->base + + QUP_OUT_FIFO_BASE); + *idx += 2; + } else if (next->flags == 0 && dev->pos == msg->len - 1 + && *idx < (dev->wr_sz*2)) { + /* Last byte of an intermittent write */ + writel((last_entry | msg->buf[dev->pos]), + dev->base + QUP_OUT_FIFO_BASE); + + qup_print_fifo_entry(dev, + last_entry | msg->buf[dev->pos], + *idx, 0); + *idx += 2; + } else + *carry_over = (last_entry | msg->buf[dev->pos]); + } else { + writel((last_entry | msg->buf[dev->pos]), + dev->base + QUP_OUT_FIFO_BASE); + + qup_print_fifo_entry(dev, + last_entry | msg->buf[dev->pos], *idx, 0); + } + } else { + writel(val | ((last_entry | msg->buf[dev->pos]) << 16), + dev->base + QUP_OUT_FIFO_BASE); + + qup_print_fifo_entry(dev, val | (last_entry << 16) | + (msg->buf[dev->pos] << 16), *idx - 2, 0); + } + + *idx += 2; + dev->pos++; + dev->cnt = msg->len - dev->pos; +} + +static int +qup_update_state(struct qup_i2c_dev *dev, uint32_t state) +{ + if (qup_i2c_poll_state(dev, 0) != 0) + return -EIO; + writel(state, dev->base + QUP_STATE); + if (qup_i2c_poll_state(dev, state) != 0) + return -EIO; + return 0; +} + +static void +qup_set_read_mode(struct qup_i2c_dev *dev, int rd_len) +{ + uint32_t wr_mode = (dev->wr_sz < dev->out_fifo_sz) ? + QUP_WR_BLK_MODE : 0; + if (rd_len > 256) { + dev_dbg(dev->dev, "HW limit: Breaking reads in chunk of 256\n"); + rd_len = 256; + } + if (rd_len <= dev->in_fifo_sz) { + writel(wr_mode | QUP_PACK_EN | QUP_UNPACK_EN, + dev->base + QUP_IO_MODE); + writel(rd_len, dev->base + QUP_MX_READ_CNT); + } else { + writel(wr_mode | QUP_RD_BLK_MODE | + QUP_PACK_EN | QUP_UNPACK_EN, dev->base + QUP_IO_MODE); + writel(rd_len, dev->base + QUP_MX_INPUT_CNT); + } +} + +static int +qup_set_wr_mode(struct qup_i2c_dev *dev, int rem) +{ + int total_len = 0; + int ret = 0; + if (dev->msg->len >= (dev->out_fifo_sz - 1)) { + total_len = dev->msg->len + 1 + + (dev->msg->len/(dev->out_blk_sz-1)); + writel(QUP_WR_BLK_MODE | QUP_PACK_EN | QUP_UNPACK_EN, + dev->base + QUP_IO_MODE); + dev->wr_sz = dev->out_blk_sz; + } else + writel(QUP_PACK_EN | QUP_UNPACK_EN, + dev->base + QUP_IO_MODE); + + if (rem > 1) { + struct i2c_msg *next = dev->msg + 1; + if (next->addr == dev->msg->addr && + next->flags == I2C_M_RD) { + qup_set_read_mode(dev, next->len); + /* make sure read start & read command are in 1 blk */ + if ((total_len % dev->out_blk_sz) == + (dev->out_blk_sz - 1)) + total_len += 3; + else + total_len += 2; + } + } + /* WRITE COUNT register valid/used only in block mode */ + if (dev->wr_sz == dev->out_blk_sz) + writel(total_len, dev->base + QUP_MX_WR_CNT); + return ret; +} + +static int +qup_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num) +{ + DECLARE_COMPLETION_ONSTACK(complete); + struct qup_i2c_dev *dev = i2c_get_adapdata(adap); + int ret; + int rem = num; + long timeout; + int err; + + mutex_lock(&dev->mlock); + + if (dev->suspended) { + mutex_unlock(&dev->mlock); + return -EBUSY; + } + + if (dev->clk_ctl == 0) { + if (dev->pdata->src_clk_rate > 0) + clk_set_rate(dev->clk, dev->pdata->src_clk_rate); + else + dev->pdata->src_clk_rate = QUP_SRC_CLK_RATE; + } + + pm_runtime_get_sync(dev->dev); + + /* Initialize QUP registers during first transfer */ + if (dev->clk_ctl == 0) { + int fs_div; + int hs_div; + uint32_t fifo_reg; + + /* Configure GSBI block to use I2C functionality */ + writel(GSBI_I2C_PROTOCOL_CODE, dev->gsbi); + + /* FS clk = I2C clk / (2*(FS_DIVIDER+3)) */ + fs_div = ((dev->pdata->src_clk_rate + / dev->pdata->bus_freq) / 2) - 3; + hs_div = QUP_CLK_CTL_HS_DIVIDER_MIN; + + dev->clk_ctl = (fs_div & QUP_CLK_CTL_FS_DIVIDER_MASK) | + ((hs_div & QUP_CLK_CTL_HS_DIVIDER_MASK) << + QUP_CLK_CTL_HS_DIVIDER_SHIFT); + + fifo_reg = readl(dev->base + QUP_IO_MODE); + if (fifo_reg & QUP_OUTPUT_BLK_SIZE) + dev->out_blk_sz = (fifo_reg & QUP_OUTPUT_BLK_SIZE) * 16; + else + dev->out_blk_sz = 16; + if (fifo_reg & QUP_INPUT_BLK_SIZE) + dev->in_blk_sz = ((fifo_reg & QUP_INPUT_BLK_SIZE) >> + QUP_INPUT_BLK_SIZE_SHIFT) * 16; + else + dev->in_blk_sz = 16; + /* + * The block/fifo size w.r.t. 'actual data' is 1/2 due to 'tag' + * associated with each byte written/received + */ + dev->out_blk_sz /= 2; + dev->in_blk_sz /= 2; + dev->out_fifo_sz = dev->out_blk_sz * + (2 << ((fifo_reg & QUP_OUTPUT_FIFO_SIZE) >> + QUP_OUTPUT_FIFO_SIZE_SHIFT)); + dev->in_fifo_sz = dev->in_blk_sz * + (2 << ((fifo_reg & QUP_INPUT_FIFO_SIZE) >> + QUP_INPUT_FIFO_SIZE_SHIFT)); + dev_dbg(dev->dev, "QUP IN:bl:%d, ff:%d, OUT:bl:%d, ff:%d\n", + dev->in_blk_sz, dev->in_fifo_sz, + dev->out_blk_sz, dev->out_fifo_sz); + } + + writel(1, dev->base + QUP_SW_RESET); + ret = qup_i2c_poll_state(dev, QUP_RESET_STATE); + if (ret) { + dev_err(dev->dev, "QUP Busy:Trying to recover\n"); + goto out_err; + } + + if (dev->num_irqs == 3) { + enable_irq(dev->in_irq); + enable_irq(dev->out_irq); + } + enable_irq(dev->err_irq); + + /* Initialize QUP registers */ + writel(0, dev->base + QUP_CONFIG); + writel(QUP_OPERATIONAL_RESET, dev->base + QUP_OPERATIONAL); + writel(QUP_STATUS_ERROR_FLAGS, dev->base + QUP_ERROR_FLAGS_EN); + + writel(I2C_MINI_CORE | I2C_N_VAL, dev->base + QUP_CONFIG); + + /* Initialize I2C mini core registers */ + writel(0, dev->base + QUP_I2C_CLK_CTL); + writel(QUP_I2C_STATUS_RESET, dev->base + QUP_I2C_STATUS); + + while (rem) { + bool filled = false; + + dev->cnt = msgs->len - dev->pos; + dev->msg = msgs; + + dev->wr_sz = dev->out_fifo_sz; + dev->err = 0; + dev->complete = &complete; + + if (qup_i2c_poll_state(dev, QUP_I2C_MAST_GEN) != 0) { + ret = -EIO; + goto out_err; + } + + qup_print_status(dev); + /* HW limits Read upto 256 bytes in 1 read without stop */ + if (dev->msg->flags & I2C_M_RD) { + qup_set_read_mode(dev, dev->cnt); + if (dev->cnt > 256) + dev->cnt = 256; + } else { + ret = qup_set_wr_mode(dev, rem); + if (ret != 0) + goto out_err; + /* Don't fill block till we get interrupt */ + if (dev->wr_sz == dev->out_blk_sz) + filled = true; + } + + err = qup_update_state(dev, QUP_RUN_STATE); + if (err < 0) { + ret = err; + goto out_err; + } + + qup_print_status(dev); + writel(dev->clk_ctl, dev->base + QUP_I2C_CLK_CTL); + + do { + int idx = 0; + uint32_t carry_over = 0; + + /* Transition to PAUSE state only possible from RUN */ + err = qup_update_state(dev, QUP_PAUSE_STATE); + if (err < 0) { + ret = err; + goto out_err; + } + + qup_print_status(dev); + /* + * This operation is Write, check the next operation + * and decide mode + */ + while (filled == false) { + if ((msgs->flags & I2C_M_RD)) + qup_issue_read(dev, msgs, &idx, + carry_over); + else if (!(msgs->flags & I2C_M_RD)) + qup_issue_write(dev, msgs, rem, &idx, + &carry_over); + if (idx >= (dev->wr_sz << 1)) + filled = true; + /* Start new message */ + if (filled == false) { + if (msgs->flags & I2C_M_RD) + filled = true; + else if (rem > 1) { + /* + * Only combine operations with + * same address + */ + struct i2c_msg *next = msgs + 1; + if (next->addr != msgs->addr || + next->flags == 0) + filled = true; + else { + rem--; + msgs++; + dev->msg = msgs; + dev->pos = 0; + dev->cnt = msgs->len; + if (msgs->len > 256) + dev->cnt = 256; + } + } else + filled = true; + } + } + err = qup_update_state(dev, QUP_RUN_STATE); + if (err < 0) { + ret = err; + goto out_err; + } + dev_dbg(dev->dev, "idx:%d, rem:%d, num:%d\n", + idx, rem, num); + + qup_print_status(dev); + timeout = wait_for_completion_timeout(&complete, HZ); + if (!timeout) { + uint32_t istatus = readl(dev->base + + QUP_I2C_STATUS); + uint32_t qstatus = readl(dev->base + + QUP_ERROR_FLAGS); + uint32_t op_flgs = readl(dev->base + + QUP_OPERATIONAL); + + dev_err(dev->dev, "Transaction timed out\n"); + dev_err(dev->dev, "I2C Status: %x\n", istatus); + dev_err(dev->dev, "QUP Status: %x\n", qstatus); + dev_err(dev->dev, "OP Flags: %x\n", op_flgs); + writel(1, dev->base + QUP_SW_RESET); + ret = -ETIMEDOUT; + goto out_err; + } + if (dev->err) { + if (dev->err > 0 && + dev->err & QUP_I2C_NACK_FLAG) + dev_err(dev->dev, + "I2C slave addr:0x%x not connected\n", + dev->msg->addr); + else if (dev->err < 0) { + dev_err(dev->dev, + "QUP data xfer error %d\n", dev->err); + ret = dev->err; + goto out_err; + } + ret = -dev->err; + goto out_err; + } + if (dev->msg->flags & I2C_M_RD) { + int i; + uint32_t dval = 0; + for (i = 0; dev->pos < dev->msg->len; i++, + dev->pos++) { + uint32_t rd_status = readl(dev->base + + QUP_OPERATIONAL); + if (i % 2 == 0) { + if ((rd_status & + QUP_IN_NOT_EMPTY) == 0) + break; + dval = readl(dev->base + + QUP_IN_FIFO_BASE); + dev->msg->buf[dev->pos] = + dval & 0xFF; + } else + dev->msg->buf[dev->pos] = + ((dval & 0xFF0000) >> + 16); + } + dev->cnt -= i; + } else + filled = false; /* refill output FIFO */ + dev_dbg(dev->dev, "pos:%d, len:%d, cnt:%d\n", + dev->pos, msgs->len, dev->cnt); + } while (dev->cnt > 0); + if (dev->cnt == 0) { + if (msgs->len == dev->pos) { + rem--; + msgs++; + dev->pos = 0; + } + if (rem) { + err = qup_update_state(dev, QUP_RESET_STATE); + if (err < 0) { + ret = err; + goto out_err; + } + } + } + /* Wait for I2C bus to be idle */ + ret = qup_i2c_poll_writeready(dev, rem); + if (ret) { + dev_err(dev->dev, + "Error waiting for write ready\n"); + goto out_err; + } + } + + ret = num; +out_err: + disable_irq(dev->err_irq); + if (dev->num_irqs == 3) { + disable_irq(dev->in_irq); + disable_irq(dev->out_irq); + } + dev->complete = NULL; + dev->msg = NULL; + dev->pos = 0; + dev->err = 0; + dev->cnt = 0; + pm_runtime_mark_last_busy(dev->dev); + pm_runtime_put_sync(dev->dev); + mutex_unlock(&dev->mlock); + return ret; +} + +static u32 +qup_i2c_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | (I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK); +} + +static const struct i2c_algorithm qup_i2c_algo = { + .master_xfer = qup_i2c_xfer, + .functionality = qup_i2c_func, +}; + +static int __devinit +qup_i2c_probe(struct platform_device *pdev) +{ + struct qup_i2c_dev *dev; + struct resource *qup_mem, *gsbi_mem, *qup_io, *gsbi_io; + struct resource *in_irq, *out_irq, *err_irq; + struct clk *clk, *pclk; + int ret = 0; + struct msm_qup_i2c_platform_data *pdata; + + dev_dbg(&pdev->dev, "qup_i2c_probe\n"); + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "platform data not initialized\n"); + return -ENOSYS; + } + + /* We support frequencies upto FAST Mode(400KHz) */ + if (pdata->bus_freq <= 0 || pdata->bus_freq > 400000) { + dev_err(&pdev->dev, "clock frequency not supported: %d Hz\n", + pdata->bus_freq); + return -EINVAL; + } + + qup_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "qup_phys_addr"); + if (!qup_mem) { + dev_err(&pdev->dev, "no qup mem resource?\n"); + return -ENXIO; + } + + gsbi_mem = platform_get_resource_byname(pdev, IORESOURCE_MEM, + "gsbi_qup_i2c_addr"); + if (!gsbi_mem) { + dev_err(&pdev->dev, "no gsbi mem resource?\n"); + return -ENXIO; + } + + /* + * We only have 1 interrupt for new hardware targets and in_irq, + * out_irq will be NULL for those platforms + */ + in_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + "qup_in_intr"); + + out_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + "qup_out_intr"); + + err_irq = platform_get_resource_byname(pdev, IORESOURCE_IRQ, + "qup_err_intr"); + if (!err_irq) { + dev_err(&pdev->dev, "no error irq resource?\n"); + return -ENXIO; + } + + qup_io = devm_request_mem_region(&pdev->dev, qup_mem->start, + resource_size(qup_mem), pdev->name); + if (!qup_io) { + dev_err(&pdev->dev, "QUP region already claimed\n"); + return -EBUSY; + } + + gsbi_io = devm_request_mem_region(&pdev->dev, gsbi_mem->start, + resource_size(gsbi_mem), pdev->name); + if (!gsbi_io) { + dev_err(&pdev->dev, "GSBI region already claimed\n"); + return -EBUSY; + } + + dev = devm_kzalloc(&pdev->dev, sizeof(struct qup_i2c_dev), GFP_KERNEL); + if (!dev) + return -ENOMEM; + + dev->dev = &pdev->dev; + dev->base = devm_ioremap(&pdev->dev, + qup_mem->start, resource_size(qup_mem)); + if (!dev->base) + return -ENOMEM; + + dev->gsbi = devm_ioremap(&pdev->dev, + gsbi_mem->start, resource_size(gsbi_mem)); + if (!dev->gsbi) + return -ENOMEM; + + clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(clk)) { + dev_err(&pdev->dev, "Could not get clock\n"); + ret = PTR_ERR(clk); + goto err_clk_get_failed; + } + + pclk = clk_get(&pdev->dev, "pclk"); + if (IS_ERR(pclk)) { + dev_err(&pdev->dev, "Could not get pclock\n"); + ret = PTR_ERR(pclk); + goto err_pclk_get_failed; + } + + if (in_irq) + dev->in_irq = in_irq->start; + if (out_irq) + dev->out_irq = out_irq->start; + dev->err_irq = err_irq->start; + if (in_irq && out_irq) + dev->num_irqs = 3; + else + dev->num_irqs = 1; + dev->clk = clk; + dev->pclk = pclk; + + platform_set_drvdata(pdev, dev); + + dev->one_bit_t = DIV_ROUND_UP(USEC_PER_SEC, pdata->bus_freq); + dev->pdata = pdata; + dev->clk_ctl = 0; + dev->pos = 0; + + /* + * We use num_irqs to also indicate if we got 3 interrupts or just 1. + * If we have just 1, we use err_irq as the general purpose irq + * and handle the changes in ISR accordingly + * Per Hardware guidelines, if we have 3 interrupts, they are always + * edge triggering, and if we have 1, it's always level-triggering + */ + if (dev->num_irqs == 3) { + ret = request_irq(dev->in_irq, qup_i2c_interrupt, + IRQF_TRIGGER_RISING, "qup_in_intr", dev); + if (ret) { + dev_err(&pdev->dev, "request_in_irq failed\n"); + goto err_request_irq_failed; + } + /* + * We assume out_irq exists if in_irq does since platform + * configuration either has 3 interrupts assigned to QUP or 1 + */ + ret = request_irq(dev->out_irq, qup_i2c_interrupt, + IRQF_TRIGGER_RISING, "qup_out_intr", dev); + if (ret) { + dev_err(&pdev->dev, "request_out_irq failed\n"); + free_irq(dev->in_irq, dev); + goto err_request_irq_failed; + } + ret = request_irq(dev->err_irq, qup_i2c_interrupt, + IRQF_TRIGGER_RISING, "qup_err_intr", dev); + if (ret) { + dev_err(&pdev->dev, "request_err_irq failed\n"); + free_irq(dev->out_irq, dev); + free_irq(dev->in_irq, dev); + goto err_request_irq_failed; + } + } else { + ret = request_irq(dev->err_irq, qup_i2c_interrupt, + IRQF_TRIGGER_HIGH, "qup_err_intr", dev); + if (ret) { + dev_err(&pdev->dev, "request_err_irq failed\n"); + goto err_request_irq_failed; + } + } + disable_irq(dev->err_irq); + if (dev->num_irqs == 3) { + disable_irq(dev->in_irq); + disable_irq(dev->out_irq); + } + i2c_set_adapdata(&dev->adapter, dev); + dev->adapter.algo = &qup_i2c_algo; + strlcpy(dev->adapter.name, + "QUP I2C adapter", + sizeof(dev->adapter.name)); + dev->adapter.nr = pdev->id; + dev->adapter.dev.parent = &pdev->dev; + + dev->suspended = 0; + mutex_init(&dev->mlock); + + pm_runtime_use_autosuspend(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, QUP_AUTOSUSPEND_DELAY); + pm_runtime_enable(&pdev->dev); + + ret = i2c_add_numbered_adapter(&dev->adapter); + if (ret) { + dev_err(&pdev->dev, "i2c_add_adapter failed\n"); + if (dev->num_irqs == 3) { + free_irq(dev->out_irq, dev); + free_irq(dev->in_irq, dev); + } + free_irq(dev->err_irq, dev); + } else + return 0; + + pm_runtime_disable(&pdev->dev); + +err_request_irq_failed: + clk_put(pclk); +err_pclk_get_failed: + clk_put(clk); +err_clk_get_failed: + return ret; +} + +static int __devexit +qup_i2c_remove(struct platform_device *pdev) +{ + struct qup_i2c_dev *dev = platform_get_drvdata(pdev); + + /* Grab mutex to ensure ongoing transaction is over */ + mutex_lock(&dev->mlock); + dev->suspended = 1; + mutex_unlock(&dev->mlock); + mutex_destroy(&dev->mlock); + qup_i2c_clk_disable(dev); + platform_set_drvdata(pdev, NULL); + if (dev->num_irqs == 3) { + free_irq(dev->out_irq, dev); + free_irq(dev->in_irq, dev); + } + free_irq(dev->err_irq, dev); + i2c_del_adapter(&dev->adapter); + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); + clk_put(dev->clk); + clk_put(dev->pclk); + return 0; +} + +#ifdef CONFIG_PM_SLEEP +static int qup_i2c_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct qup_i2c_dev *qup = platform_get_drvdata(pdev); + dev_dbg(dev, "%s\n", __func__); + + /* Grab mutex to ensure ongoing transaction is over */ + mutex_lock(&qup->mlock); + qup->suspended = 1; + mutex_unlock(&qup->mlock); + + if (pm_runtime_enabled(dev) && !pm_runtime_suspended(dev)) + qup_i2c_clk_disable(qup); + + return 0; +} + +static int qup_i2c_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct qup_i2c_dev *qup = platform_get_drvdata(pdev); + dev_dbg(dev, "%s\n", __func__); + + if (pm_runtime_enabled(dev) && !pm_runtime_suspended(dev)) + qup_i2c_clk_enable(qup); + + qup->suspended = 0; + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +#ifdef CONFIG_PM_RUNTIME +static int i2c_qup_runtime_idle(struct device *dev) +{ + dev_dbg(dev, "pm_runtime: idle...\n"); + + pm_request_autosuspend(dev); + return -EAGAIN; +} + +static int i2c_qup_runtime_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct qup_i2c_dev *qup = platform_get_drvdata(pdev); + + dev_dbg(dev, "pm_runtime: suspending...\n"); + + qup_i2c_clk_disable(qup); + return 0; +} + +static int i2c_qup_runtime_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct qup_i2c_dev *qup = platform_get_drvdata(pdev); + + dev_dbg(dev, "pm_runtime: resuming...\n"); + + qup_i2c_clk_enable(qup); + return 0; +} +#endif + +static const struct dev_pm_ops i2c_qup_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS( + qup_i2c_suspend, + qup_i2c_resume + ) + SET_RUNTIME_PM_OPS( + i2c_qup_runtime_suspend, + i2c_qup_runtime_resume, + i2c_qup_runtime_idle + ) +}; + +static struct platform_driver qup_i2c_driver = { + .probe = qup_i2c_probe, + .remove = __devexit_p(qup_i2c_remove), + .driver = { + .name = "qup_i2c", + .owner = THIS_MODULE, + .pm = &i2c_qup_dev_pm_ops, + }, +}; + +/* QUP may be needed to bring up other drivers */ +static int __init +qup_i2c_init_driver(void) +{ + return platform_driver_register(&qup_i2c_driver); +} +arch_initcall(qup_i2c_init_driver); + +static void __exit qup_i2c_exit_driver(void) +{ + platform_driver_unregister(&qup_i2c_driver); +} +module_exit(qup_i2c_exit_driver); + +MODULE_LICENSE("GPL v2"); +MODULE_VERSION("1.0"); +MODULE_ALIAS("platform:i2c_qup"); +MODULE_AUTHOR("Sagar Dharia "); diff --git a/include/linux/platform_data/msm_qup_i2c.h b/include/linux/platform_data/msm_qup_i2c.h new file mode 100644 index 0000000..f09564e --- /dev/null +++ b/include/linux/platform_data/msm_qup_i2c.h @@ -0,0 +1,24 @@ +/* + * Qualcomm MSM QUP i2c Controller Platform Data + * + * Copyright (c) 2011, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __MSM_QUP_I2C_PLATFORM_DATA_H +#define __MSM_QUP_I2C_PLATFORM_DATA_H + +struct msm_qup_i2c_platform_data { + int bus_freq; /* I2C bus frequency (Hz) */ + int src_clk_rate; /* I2C controller clock rate (Hz) */ +}; + +#endif /* __MSM_QUP_I2C_PLATFORM_DATA_H */ -- 1.7.3.3 -- Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/