Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757976Ab1FPNcJ (ORCPT ); Thu, 16 Jun 2011 09:32:09 -0400 Received: from wolverine01.qualcomm.com ([199.106.114.254]:7142 "EHLO wolverine01.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756243Ab1FPNby (ORCPT ); Thu, 16 Jun 2011 09:31:54 -0400 X-IronPort-AV: E=McAfee;i="5400,1158,6378"; a="98075546" From: Tatyana Brokhman To: greg@kroah.com Cc: linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org, balbi@ti.com, ablay@codeaurora.org, Tatyana Brokhman , linux-kernel@vger.kernel.org (open list) Subject: [PATCH/RFC 2/5] usb:dummy_hcd: connect/disconnect test support Date: Thu, 16 Jun 2011 16:31:04 +0300 Message-Id: <1308231068-24038-3-git-send-email-tlinder@codeaurora.org> X-Mailer: git-send-email 1.7.3.3 In-Reply-To: <1308231068-24038-2-git-send-email-tlinder@codeaurora.org> References: <1308231068-24038-2-git-send-email-tlinder@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4079 Lines: 119 This implementation adds a new proprietary device control requests (to be handled by the dummy_hcd) that initiates a connect/disconnect sequence. The bRequest value of the new control request is 0x52. It is used by the user-space Unit testing application. Signed-off-by: Tatyana Linder --- drivers/usb/gadget/dummy_hcd.c | 48 ++++++++++++++++++++++++++++++++++++++++ 1 files changed, 48 insertions(+), 0 deletions(-) diff --git a/drivers/usb/gadget/dummy_hcd.c b/drivers/usb/gadget/dummy_hcd.c index 74b7655..7d0a6fe 100644 --- a/drivers/usb/gadget/dummy_hcd.c +++ b/drivers/usb/gadget/dummy_hcd.c @@ -179,6 +179,7 @@ struct dummy_hcd { unsigned active:1; unsigned old_active:1; unsigned resuming:1; + struct work_struct conn_disc_work; }; struct dummy { @@ -1362,6 +1363,43 @@ static struct dummy_ep *find_endpoint (struct dummy *dum, u8 address) #define Ep_Request (USB_TYPE_STANDARD | USB_RECIP_ENDPOINT) #define Ep_InRequest (Ep_Request | USB_DIR_IN) +/** + * dummy_hcd_conn_disc_work() - performs a disconnect/connect sequence. + * @data: pointer to the sceduled work_struct + */ +static void dummy_hcd_conn_disc_work(struct work_struct *data) +{ + struct dummy_hcd *dum_hcd = + container_of(data, struct dummy_hcd, conn_disc_work); + int ret_val; + + if (!dum_hcd->dum->driver) { + dev_err(dummy_dev(dum_hcd), + "dummy_hcd_conn_disc_work called without connected " + "device\n"); + return; + } + + dev_info(dummy_dev(dum_hcd), "disconnecting device...\n"); + ret_val = dummy_pullup(&dum_hcd->dum->gadget, 0); + if (ret_val) { + dev_err(dummy_dev(dum_hcd), "dummy_hcd_conn_disc_work:" + " couldn't disconnect device:" + " ret_val=%d\n", + ret_val); + return; + } + + dev_info(dummy_dev(dum_hcd), "re-connecting device...\n"); + /* We have to let the hub task to update the device disconnect state */ + msleep_interruptible(1000); + ret_val = dummy_pullup(&dum_hcd->dum->gadget, 1); + if (ret_val) + dev_err(dummy_dev(dum_hcd), "dummy_hcd_conn_disc_work:" + " couldn't re-connect device:" + " ret_val=%d\n", + ret_val); +} /** * handle_control_request() - handles all control transfers @@ -1534,6 +1572,10 @@ static int handle_control_request(struct dummy_hcd *dum_hcd, struct urb *urb, *status = 0; } break; + case 0x52: /* UT: Connect/disconnect the device */ + schedule_work(&dum_hcd->conn_disc_work); + ret_val = 0; + break; } return ret_val; } @@ -2249,6 +2291,8 @@ static int dummy_setup(struct usb_hcd *hcd) if (usb_hcd_is_primary_hcd(hcd)) { the_controller.hs_hcd = hcd_to_dummy_hcd(hcd); the_controller.hs_hcd->dum = &the_controller; + INIT_WORK(&the_controller.hs_hcd->conn_disc_work, + dummy_hcd_conn_disc_work); /* * Mark the first roothub as being USB 2.0. * The USB 3.0 roothub will be registered later by @@ -2259,6 +2303,8 @@ static int dummy_setup(struct usb_hcd *hcd) } else { the_controller.ss_hcd = hcd_to_dummy_hcd(hcd); the_controller.ss_hcd->dum = &the_controller; + INIT_WORK(&the_controller.ss_hcd->conn_disc_work, + dummy_hcd_conn_disc_work); hcd->speed = HCD_USB3; hcd->self.root_hub->speed = USB_SPEED_SUPER; } @@ -2364,9 +2410,11 @@ static int dummy_hcd_remove (struct platform_device *pdev) if (dum->ss_hcd) { usb_remove_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); usb_put_hcd(dummy_hcd_to_hcd(dum->ss_hcd)); + cancel_work_sync(&dum->ss_hcd->conn_disc_work); } usb_remove_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); usb_put_hcd(dummy_hcd_to_hcd(dum->hs_hcd)); + cancel_work_sync(&dum->hs_hcd->conn_disc_work); the_controller.ss_hcd = the_controller.hs_hcd = NULL; return 0; } -- 1.7.3.3 -- Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/