Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754271Ab1FVIhu (ORCPT ); Wed, 22 Jun 2011 04:37:50 -0400 Received: from wolverine02.qualcomm.com ([199.106.114.251]:48097 "EHLO wolverine02.qualcomm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751007Ab1FVIhr (ORCPT ); Wed, 22 Jun 2011 04:37:47 -0400 X-IronPort-AV: E=McAfee;i="5400,1158,6384"; a="99096511" From: Tatyana Brokhman To: balbi@ti.com Cc: linux-usb@vger.kernel.org, linux-arm-msm@vger.kernel.org, ablay@codeaurora.org, Tatyana Brokhman , linux-kernel@vger.kernel.org (open list) Subject: =?UTF-8?q?=5BRFC/PATCH/RESEND=202/3=5D=20usb=20unittests=20framework=3A=20Documentation?= Date: Wed, 22 Jun 2011 11:34:09 +0300 Message-Id: <1308731651-7397-3-git-send-email-tlinder@codeaurora.org> X-Mailer: git-send-email 1.7.3.3 In-Reply-To: <1308731651-7397-1-git-send-email-tlinder@codeaurora.org> References: <1308731651-7397-1-git-send-email-tlinder@codeaurora.org> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29817 Lines: 770 Signed-off-by: Tatyana Brokhman --- .../usb/unittests/Documentation/autoconfig_readme | 20 + .../usb/unittests/Documentation/create-gadget-img | 47 ++ tools/usb/unittests/Documentation/unittests-info | 526 ++++++++++++++++++++ tools/usb/unittests/Documentation/unittests-setup | 127 +++++ 4 files changed, 720 insertions(+), 0 deletions(-) create mode 100644 tools/usb/unittests/Documentation/autoconfig_readme create mode 100644 tools/usb/unittests/Documentation/create-gadget-img create mode 100644 tools/usb/unittests/Documentation/unittests-info create mode 100644 tools/usb/unittests/Documentation/unittests-setup diff --git a/tools/usb/unittests/Documentation/autoconfig_readme b/tools/usb/unittests/Documentation/autoconfig_readme new file mode 100644 index 0000000..07112e1 --- /dev/null +++ b/tools/usb/unittests/Documentation/autoconfig_readme @@ -0,0 +1,20 @@ + +Questions can be refereed to tlinder@codeaurora.org. +Copyright (C) 2011 Code Aurora Forum. All rights reserved + +Description +----------- +This script is used to automatically configure the kernel .config file +(instead of using menuconfig). +This script should be ran after using defconfig. + +Please note that the script modifies the .config file under out-32 (and +should be executed in the out-32 directory). + +The script activates the dummy_HCD controller and configures the gadget +to operate in a SS mode. + +-- +Created by a consultant of the Qualcomm Innovation Center, Inc. +The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. + diff --git a/tools/usb/unittests/Documentation/create-gadget-img b/tools/usb/unittests/Documentation/create-gadget-img new file mode 100644 index 0000000..edb34a7 --- /dev/null +++ b/tools/usb/unittests/Documentation/create-gadget-img @@ -0,0 +1,47 @@ + +Questions can be refereed to tlinder@codeaurora.org. +Copyright (C) 2011 Code Aurora Forum. All rights reserved + + +This is how disk is built: +------------------------- +VM points to the location of the Virtual Machine + +cd $VM +mkdir rootfs +# create unformatted image +qemu-img create -f raw gadget.img 600M +# format it with ext2 +mkfs.ext2 -F gadget.img +# mount +fuseext2 gadget.img rootfs -o rw+ +# populate disk with basic Linux installation +debootstrap --arch=i386 karmic rootfs + +#prepare image for real life +echo "proc /proc proc defaults 0 0" >> rootfs/etc/fstab +echo "/dev/sda / ext2 defaults 0 0" >> rootfs/etc/fstab + +echo "user ALL=(ALL) ALL" >> rootfs/etc/sudoers + +echo "auto lo" >> rootfs/etc/network/interfaces +echo "iface lo inet loopback" >> rootfs/etc/network/interfaces +echo "auto eth0" >> rootfs/etc/network/interfaces +echo "iface eth0 inet dhcp" >> rootfs/etc/network/interfaces + +#unmount it +fusermount -u rootfs + +Boot in a single mode (use -append "root=/dev/sda single"); in the VM, execute: + +useradd user +passwd -d user +echo "root:root00" | chpasswd +apt-get --yes install openssh-server +halt + +NOTE: instructions are incomplete + +-- +Created by a consultant of the Qualcomm Innovation Center, Inc. +The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. \ No newline at end of file diff --git a/tools/usb/unittests/Documentation/unittests-info b/tools/usb/unittests/Documentation/unittests-info new file mode 100644 index 0000000..163b270 --- /dev/null +++ b/tools/usb/unittests/Documentation/unittests-info @@ -0,0 +1,526 @@ + +Questions can be refereed to tlinder@codeaurora.org. +Copyright (C) 2011 Code Aurora Forum. All rights reserved + +1: INPUT PARAMETERS +------------------- + +Usb_test receives the following input parameters: +1.int busnum - the bus number of the USB device to run the tests on +2.int devnum - the device number of the USB device to run the tests on +3.int productid - the product id of the USB device to run the tests on +4.int vendorid - the vendor id of the USB device to run the tests on +The above data can be retrieved by running lsusb command on the VM/Linux host +the USB device is connected to. +Note: You should provide either busnum and devnum or productid and vendorid +as an input. +5.int num_expected_strms_in_ep - the number of expected streams for IN EP's + ep_comp desc +6.int num_expected_strms_out_ep - the number of expected streams for OUT EP's + ep_comp desc +7.int intr_num - the number of the interface to run the test on +8.int devel - set this flag to 1 if you wish to run in development mode. + (Refer to section 3 for more details) +9.int uasp_dev - set this flag to 1 if running the test on a UAS Gadget driver +10.int debug - this flag indicates if debug information will be printed or not. + The default is that no debug info will be printed (debug = 0). You can change + that by setting debug = 1 (optional) +11.int streams_dev - Setting this flag to 1 will result in running only streams + tests +12.char gadget_sysfs_path[MAX_STRING_LEN] - Gadget sysfs path. The default is: + "/sys/devices/platform/dummy_udc/gadget/" + +Example: +./usb_tests --busnum=2 --devnum=3 --debug=1 + + +2: RUNNING A SUBSET OF THE TESTS (ACCORDING TO DEVICE SPEED) +------------------------------------------------------------ + +On Unittests initialization the speed of the connected device is read and the +appropriate test suite is excluded from the tests to run. Meaning if it's a +HS/SS device CompositeSSTests/ CompositeHSTests won't be run. +Beside this exception GoogleTest will run all the test suites. + + +3. RUNNING IN DEVELOPMENT MODE +------------------------------ + +It's possible to choose a test to run. In order to do so run the test in +development mode, meaning + ./usb_tests --busnum=2 --devnum=3 -devel=1 +This will open a list of test for you to choose which test to run. +At the moment this option is developed for UAS tests only but other tests can be +easily added to this menu. + +4: IMPLEMENTED TESTS +-------------- + +4.1: DUMMY TESTS + +4.1.1 test_connect_disconnect + Test Suite: DummyTests + Test Name: test_connect_disconnect + Test Description: + This test verifies the connect&disconnect sequence. + Verification is done by testing the correct enumeration descriptors were sent + (according to speed). + + +4.2: COMPOSITE HS TESTS + +This test suite is applicable only for a HS device. The test in this suite +verify chapter 9 requests that are applicable only to HS device. +For example: HS descriptors. + +4.2.1 Test_hs_descriptors + Test Suite: CompositeHSTests + Test Name: test_hs_descriptors + Test Description: + This test verifies the validity of the HS device and interface descriptors + returned as part of the enumeration sequence. + Verification is done according to the expected descriptors defined in + hs_expected_desc.h + +4.2.2 Test_hs_get_status_default_device + Test Suite: CompositeHSTests + Test Name: test_hs_get_status_default_device + Test Description: + This function sends a GET_STATUS request to the hs device in default state and + checks that the response is as expected (section 9.4.5 in the USB2 standard) + +4.2.3 Test_hs_get_status_default_interface + Test Suite: CompositeHSTests + Test Name: test_hs_get_status_default_interface + Test Description: + This function sends a GET_STATUS request to the hs interface in default state + (section 9.4.5 in the USB2 standard) + +4.2.4 Test_hs_get_status_default_endpoint + Test Suite: CompositeHSTests + Test Name: test_hs_get_status_default_endpoint + Test Description: + This function sends a GET_STATUS request to the hs endpoint in default state + (section 9.4.5 in the USB2 standard) + +4.2.5 Test_hs_set_feature_suspend_interface + Test Suite: CompositeHSTests + Test Name: test_hs_set_feature_suspend_interface + Test Description: + This function sends a SET_FEATURE request to the ss interface in default + state, to set the suspend functionality for remote wakeup. + +4.2.6 Test_hs_set_feature_halt_ep + Test Suite: CompositeHSTests + Test Name: test_hs_set_feature_halt_ep + Test Description: + This function sends a SET_FEATURE request to the hs EP in default state, to + set the halt feature. It's run for the BULK IN endpoint and assumes the device + has such. + + +4.3: COMPOSITE SS TESTS + +This test suite is applicable only for a SS device. The test in this suite +verify chapter 9 modifications that were made/added by the USB 3.0 spec. + +4.3.1 Test_ss_descriptors + Test Suite: CompositeSSTests + Test Name: test_ss_descriptors + Test Description: + This test verifies the validity of the HS device, interface and BOS + descriptors returned as part of the enumeration sequence. + Verification is done according to the expected descriptors defined in + ss_expected_desc.h + +4.3.2 Test_ss_get_status_default_device + Test Suite: CompositeSSTests + Test Name: test_ss_get_status_default_device + Test Description: + This function sends a GET_STATUS request to the ss device in default state + (when LTM, U1 & U2 are not enabled) and checks that the response is as + expected (section 9.4.5 in the USB3 standard) + Verification of the GetStatus() request is done by the SetFeature() + (with bmRequestType = 0x80H) request sent prior to the GetStatus() request. + +4.3.3 Test_ss_get_status_default_interface + Test Suite: CompositeSSTests + Test Name: test_ss_get_status_default_interface + Test Description: + This function sends a GET_STATUS request to the ss interface in default state + (section 9.4.5 in the USB3 standard) + Verification of the GetStatus() request is done by the SetFeature() + (with bmRequestType = 0x81H) request sent prior to the GetStatus() request. + Refer to Section 9.4.5 of the USB 3.0 spec for details on GetStatus request. + +4.3.4 Test_ss_get_status_default_ep + Test Suite: CompositeSSTests + Test Name: test_ss_get_status_default_ep + Test Description: + This function sends a GET_STATUS request to the ss endpoint in default state + (section 9.4.5 in the USB3 standard). It's run for the BULK IN endpoint and + assumes the device has such. + Verification of the GetStatus() request is done by the SetFeature() + (with bmRequestType = 0x81H) request sent prior to the GetStatus() request. + Refer to Section 9.4.5 of the USB 3.0 spec for details on GetStatus request. + +4.3.5 Test_ss_set_feature_u1_device + Test Suite: CompositeSSTests + Test Name: test_ss_set_feature_u1_device + Test Description: + This function sends a SET_FEATURE request to the ss device in default state, + to set the U1 power level capability. + Verification that the SetFeature request was successful is done by GetStatus() + request with bmRequestType = 0x81H. Refer to Section 9.4.5 of the USB 3.0 spec + for details on GetStatus request. + Refer to section 9.4.9 and Table 9-6 of the USB 3.0 spec for more details on + the SetFeature request. + +4.3.6 Test_ss_set_feature_u2_device + Test Suite: CompositeSSTests + Test Name: test_ss_set_feature_u2_device + Test Description: + This function sends a SET_FEATURE request to the ss device in default state, + to set the U2 power level capability. + Verification that the SetFeature request was successful is done by GetStatus() + request with bmRequestType = 0x81H. Refer to Section 9.4.5 of the USB 3.0 + spec for details on GetStatus request. + Refer to section 9.4.9 and Table 9-6 of the USB 3.0 spec for more details on + the SetFeature request. + +4.3.7 Test_ss_set_feature_ltm_device + Test Suite: CompositeSSTests + Test Name: test_ss_set_feature_u2_device + Test Description: + This function sends a SET_FEATURE request to the ss device in default state, + to set the LTM capability. + Verification that the SetFeature request was successful is done by GetStatus() + request with bmRequestType = 0x81H. Refer to Section 9.4.5 of the USB 3.0 + spec for details on GetStatus request. + Refer to section 9.4.9 and Table 9-6 of the USB 3.0 spec for more details on + the SetFeature request. + +4.3.8 Test_ss_set_feature_halt_ep + Test Suite: CompositeSSTests + Test Name: test_ss_set_feature_halt_ep + Test Description: + This function sends a SET_FEATURE request to the ss EP in default state, to + set the halt feature It's run for the BULK IN endpoint and assumes the device + has such. + Verification that the SetFeature request was successful is done by GetStatus() + request with bmRequestType = 0x81H. Refer to Section 9.4.5 of the USB 3.0 + spec for details on GetStatus request. + Refer to section 9.4.9 and Table 9-6 of the USB 3.0 spec for more details on + the SetFeature request. + +4.3.9 Test_ss_set_feature_suspend_low_power_interface + Test Suite: CompositeSSTests + Test Name: test_ss_set_feature_suspend_low_power_interface + Test Description: + This function sends a SET_FEATURE request to the ss interface in default + state, to set the suspend functionality for low power. + Verification that the SetFeature request was successful is done by GetStatus() + request with bmRequestType = 0x81H. Refer to Section 9.4.5 of the USB 3.0 + spec for details on GetStatus request. + Refer to section 9.4.9 and Table 9-6 of the USB 3.0 spec for more details on + the SetFeature request. + +4.3.10 Test_ss_set_feature_suspend_remote_wakeup_interface + Test Suite: CompositeSSTests + Test Name: test_ss_set_feature_suspend_remote_wakeup_interface + Test Description: + This function sends a SET_FEATURE request to the ss interface in default + state, to set the suspend functionality for remote wakeup. + Verification that the SetFeature request was successful is done by GetStatus() + request with bmRequestType = 0x81H. Refer to Section 9.4.5 of the USB 3.0 + spec for details on GetStatus request. + Refer to section 9.4.9 and Table 9-6 of the USB 3.0 spec for more details on + the SetFeature request. + + +4.4: SERIAL TESTS + +The tests in this test suite are general data transfer tests that are applicable +to all devices (HS and SS) and test the data transfers in the Gadget framework, +not in a specific FD. The test in this test suite should be performed on the +g_zero module using f_sourcesink gadget. + +4.4.1 Test_single_bulk_in + Test Suite: SerialTests + Test Name: test_single_bulk_in + Test Description: + This test verifies a single BULK transfer on a BULK IN endpoint. Data transfer + size is an input parameter for the test. + +4.4.2 Test_single_bulk_out + Test Suite: SerialTests + Test Name: test_single_bulk_out + Test Description: + This test verifies a single BULK transfer on a BULK OUT endpoint. Data + transfer size is an input parameter for the test. + + +4.5 STREAMS TESTS + +The tests in this test suite intended to test the streaming capability added by +the SS USB spec, thus they are applicable only to SS devices. + +4.5.1 Tests_streams_bulk_loopback + Test Suite: StreamsTests + Test Name: test_streams_bulk_loopback + Test Description: + This test initiates N bulk OUT transfers on N streams, and verifies reception + on bulk IN EP. + + +4.6 UAS TESTS + +This tests are meant to run on a UAS supporting device. Their intention is to +test various COMAND/TASK MANAGEMENT IUs handling as defined by the UAS spec. +The COMMAND IUs include SCSI commands. +Verification of all the test successful completion is done according to the +SENCE IU received upon completion. +The below tests are applicable to UAS device operating both in SS and in HS +mode. + +4.6.1 exec_send_inquiry + Test Suite: UASTests + Test Name: exec_send_inquiry + Test Description: + This function sends the INQUIRY SCSI command (opCode = 0x12), encapsulated in + a COMMAND IU, to the device and verifies the correct reply from it. + +4.6.2 exec_send_request_sense + Test Suite: UASTests + Test Name: exec_send_request_sense + Test Description: + This function sends the REQUEST SENSE SCSI command (opCode = 0x03), + encapsulated in a COMMAND IU, to the device and verifies the correct reply + from it. + +4.6.3 exec_test_unit_ready + Test Suite: UASTests + Test Name: exec_test_unit_ready + Test Description: + This function sends the TEST UNIT READY SCSI command (opCode = 0x00), + encapsulated in a COMMAND IU, to the device and verifies the correct reply + from it. + +4.6.4 exec_send_read_capacity + Test Suite: UASTests + Test Name: exec_send_read_capacity + Test Description: + This function sends the READ CAPACITY SCSI command (opCode = 0x25), + encapsulated in a COMMAND IU, to the device and verifies the correct reply + from it. + +4.6.5 exec_send_mode_sense + Test Suite: UASTests + Test Name: exec_send_mode_sense + Test Description: + This function sends the MODE SENSE6 SCSI command (opCode = 0x01), encapsulated + in a COMMAND IU, to the device and verifies the correct reply from it. + +4.6.6 exec_send_mode_sense10 + Test Suite: UASTests + Test Name: exec_send_mode_sense10 + Test Description: + This function sends the MODE SENSE10 SCSI command (opCode = 0x5a), + encapsulated in a COMMAND IU, to the device and verifies the correct + completion of it. + +4.6.7 exec_send_prevent_allow_removal + Test Suite: UASTests + Test Name: exec_send_prevent_allow_removal + Test Description: + This function sends the ALLOW MEDIUM REMOVAL SCSI command (opCode = 0x1e), + encapsulated in a COMMAND IU, to the device and verifies the correct + completion of it. + +4.6.8 exec_test_read6 + Test Suite: UASTests + Test Name: exec_test_read6 + Test Description: + This function sends the READ6 SCSI command (opCode = 0x08), encapsulated in a + COMMAND IU, to the device and verifies the correct completion of it. + At the beginning of the test a verification buffer is written to the device. + The read data is compared to that buffer. Upon test completion the device data + file content is restored to its original state. + +4.6.9 exec_test_read10 + Test Suite: UASTests + Test Name: exec_test_read10 + Test Description: + This function sends the READ10 SCSI command (opCode = 0x28), encapsulated in + a COMMAND IU, to the device and verifies the correct completion of it. + At the beginning of the test a verification buffer is written to the device. + The read data is compared to that buffer. Upon test completion the device data + file content is restored to its original state. + +4.6.10 exec_test_read12 + Test Suite: UASTests + Test Name: exec_test_read12 + Test Description: + This function sends the READ12 SCSI command (opCode = 0xa8), encapsulated in + a COMMAND IU, to the device and verifies the correct completion of it. + At the beginning of the test a verification buffer is written to the device. + The read data is compared to that buffer. Upon test completion the device data + file content is restored to its original state. + +4.6.11 exec_test_write6 + Test Suite: UASTests + Test Name: exec_test_write6 + Test Description: + This function sends the WRITE6 SCSI command (opCode = 0x0a), encapsulated in + a COMMAND IU, to the device and verifies the correct completion of it. + Upon test completion the device data file content is restored to its original + state. + TODO: Add write verification + +4.6.12 exec_test_write10 + Test Suite: UASTests + Test Name: exec_test_write10 + Test Description: + This function sends the WRITE10 SCSI command (opCode = 0x2a), encapsulated in + a COMMAND IU, to the device and verifies the correct completion of it. + Upon test completion the device data file content is restored to its original + state. + TODO: Add write verification + +4.6.13 exec_test_write12 + Test Suite: UASTests + Test Name: exec_test_write12 + Test Description: + This function sends the WRITE12 SCSI command (opCode = 0xaa), encapsulated in + a COMMAND IU, to the device and verifies the correct completion of it. + Upon test completion the device data file content is restored to its original + state. + TODO: Add write verification + +4.6.14 exec_test_write_huge + Test Suite: UASTests + Test Name: exec_test_write_huge + Test Description: + This function sends the WRITE10 SCSI command (opCode = 0x2a), encapsulated in + a COMMAND IU, with a huge amount of data to write and verifies the correct + completion of it. + Upon test completion the device data file content is restored to its original + state. + TODO: Add write verification + +4.6.15 exec_test_read_format_capacities + Test Suite: UASTests + Test Name: exec_test_read_format_capacities + Test Description: + This function sends the READ FORMAT CAPACITIES SCSI command (opCode = 0x23), + encapsulated in a COMMAND IU and verifies the correct completion of it. + +4.6.16 exec_test_start_stop + Test Suite: UASTests + Test Name: exec_test_start_stop + Test Description: + This function sends the START STOP UNIT SCSI command (opCode = 0x1b), + encapsulated in a COMMAND IU and verifies the correct completion of it. + This test verifies several versions of the command: + a)(LoEj,Start) = 00 (stop motor) + b)(LoEj,Start) = 01 (start motor) + c)(LoEj,Start) = 10 (Eject media) + After the media is ejected the lun is closed. We need to re-open it manually + in order to be able to continue working with it. This is done by writing to + the file attribute the name of the file the module was loaded with. + d)(LoEj,Start) = 11 (LOAD media) + +4.6.17 exec_test_verify + Test Suite: UASTests + Test Name: exec_test_verify + Test Description: + This function sends the VERIFY SCSI command (opCode = 0x2f), encapsulated in + a COMMAND IU and verifies the correct completion of it. + +4.6.18 exec_test_synchronize_cache + Test Suite: UASTests + Test Name: exec_test_synchronize_cache + Test Description: + This function sends the SINCHRONIZE CACHE SCSI command (opCode = 0x35), + encapsulated in a COMMAND IU and verifies the correct completion of it. + +4.6.19 exec_test_tm_reset_lun + Test Suite: UASTests + Test Name: exec_test_tm_reset_lun + Test Description: + This function sends the LOGICAL UNIT RESET TASK MANAGEMENTcommand + (Code = 0x08), and verifies the correct completion of it according to the + RESPONSE IU. + At the beginning of the test 2 commands are issued to the device that should + be canceled by the RESET LUN TM. + +4.6.20 exec_test_tm_abort_task + Test Suite: UASTests + Test Name: exec_test_tm_abort_task + Test Description: + This function sends the ABORT TASK TASK MANAGEMENTcommand (Code = 0x01), and + verifies the correct completion of it according to the RESPONSE IU. + At the beginning of the test a command is issued to the device that should be + canceled by the ABORT TASK TM. + +4.6.21 exec_test_tm_abort_task_set + Test Suite: UASTests + Test Name: exec_test_tm_abort_task_set + Test Description: + This function sends the ABORT TASK SET TASK MANAGEMENTcommand (Code = 0x02), + and verifies the correct completion of it according to the RESPONSE IU. + At the beginning of the test 2 commands are issued to the device that should + be canceled by the ABORT TASK SET TM. + +4.6.22 exec_test_tm_reset_nexus + Test Suite: UASTests + Test Name: exec_test_tm_reset_nexus + Test Description: + This function sends the RESET NEXUS TASK MANAGEMENTcommand (Code = 0x10), and + verifies the correct completion of it according to the RESPONSE IU. + At the beginning of the test 2 commands are issued to the device that should + be canceled by the RESET NEXUS TM. + +4.6.23 exec_test_tm_query_async_ev + Test Suite: UASTests + Test Name: exec_test_tm_query_async_ev + Test Description: + This function sends the QUERY ASYNC EVENT TASK MANAGEMENTcommand + (Code = 0x82), and verifies the correct completion of it according to the + RESPONSE IU. + +4.6.24 exec_test_tm_query_task + Test Suite: UASTests + Test Name: exec_test_tm_query_task + Test Description: + This function sends the QUERY TASK TASK MANAGEMENTcommand (Code = 0x80), and + verifies the correct completion of it according to the RESPONSE IU. + +4.6.25 exec_test_tm_query_task_set + Test Suite: UASTests + Test Name: exec_test_tm_query_task_set + Test Description: + This function sends the QUERY TASK SET TASK MANAGEMENTcommand (Code = 0x81), + and verifies the correct completion of it according to the RESPONSE IU. + +4.6.26 exec_test_tm_overlapped_tag + Test Suite: UASTests + Test Name: exec_test_tm_overlapped_tag + Test Description: + This function verifies correct handling of tag overlapping. It issues 2 + commands with the same tag id and verifies that both commands were handled + correctly, meaning aborted. + One of the commands issued is a COMMAND IU and the other is TM IU. + +4.6.27 exec_test_cmd_overlapped_tag + Test Suite: UASTests + Test Name: exec_test_cmd_overlapped_tag + Test Description: + This function verifies correct handling of tag overlapping. It issues 2 + commands with the same tag id and verifies that both commands were handled + correctly, meaning aborted. + Both of the command issued are COMMAND IUs. + +-- +Created by a consultant of the Qualcomm Innovation Center, Inc. +The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. \ No newline at end of file diff --git a/tools/usb/unittests/Documentation/unittests-setup b/tools/usb/unittests/Documentation/unittests-setup new file mode 100644 index 0000000..f336e3b --- /dev/null +++ b/tools/usb/unittests/Documentation/unittests-setup @@ -0,0 +1,127 @@ + +Questions can be refereed to tlinder@codeaurora.org. +Copyright (C) 2011 Code Aurora Forum. All rights reserved + +USB device Unit test framework +============================== + +Introduction +------------- + +This document describes the SuperSpeed USB Unit tests including setup, +environment and test cases. + + +1: SETUP +--------- + +The Unit tests code consists of 4 parts: + +1. The usb-tests code that is part of the kernel usb code. +2. Googletest code. Downloaded from the web. +3. The user-space test code in this distribution +4. libusb code that is part of the libusb git repository + +The Unit tests can be ran on any Linux machine with a device that has g_zero +and dummy_hcd module loaded on it. If you wish to run the Unit tests on another +device (one that doesn't support g_zero and dumm_hcd_ it's possible but not all +of the bellow tests will pass. This is due to the fact that several proprietary +control requests handling were implemented in the above modules in order to +support some of the tests. For example: new control request handling was +added to the dummy_hcd module to perform a connect/disconnect sequence. + + +1.1: GETTING USB-TEST CODE FROM THE KERNEL REPOSITORY + +Get the kernel code from + git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git +The unit test kernel patches are released as part of kernel2.6.?? so you should +work with this version of the kernel or later. + +Compiling the Kernel code: +Export $KERNEL to point to the location of your kernel. +mkdir out-32 +cd out-32 +make -C $KERNEL O=`pwd` ARCH=x86 defconfig + +Run the autoconfig.sh script to configure the kernel. Please refer to +autoconfig_readme for details. + +Compilation: +make -C $KERNEL O=`pwd` ARCH=x8 + + +1.2: LIBUSB CODE + +Get the libusb code from git://git.libusb.org/libusb.git +The libusb related patches are merged into the libusb tree. (NOT YET!!!) + +1.2.1 Libusb Setup and compilation + +Install the following packages (from synaptic): +a. autoconfig +b.automake +c. libtool + +Run: ./autogen.sh. –prefix= +This script will generate the .config file and the Makefile + +Open the auto-generated Makefiles (there is one under libusb, one under +libusb/libusb and another one under libusb/examples) and update the following: +a)To CPPFLAGS add -m32 (CPPFLAGS = -m32) +b)To CFLAGS add -m32 (CFLAGS = -g -O2 -m32) +c)Change every x86_64 to i386 + +run: make install +The library and include files will be placed in . --prefix= + + +1.3: GOOGLETEST CODE + +Download from +http://code.google.com/p/googletest/downloads/list (gtest-1.5.0.tar.bz2) . +Open the Makefile and add “-lpthread” to CXXFLAGS: +CXXFLAGS += -g -Wall -Wextra -m32 -L/usr/lib32 -lstdc++ -L/usr/local/lib -lusb-1.0 -lpthread + + +1.4 COMPILING USER SPACE TEST CODE (IN THIS PACKAGE) + +cd ../tools/usb/unittests/make/ (from your working area) + +Set the $KERNEL to your kernel source code, $GTEST to your Googletest directory +and $LIBUSB to your libusb compilation output directory. + +make +The make creates an executable called usb_tests + + +1.5: VIRTUAL MACHINE + +If you wish to use the dummy_hcd module then it's best to run the Unit tests on +a Virtual machine (VM). +Debugging of the VM kernel is performed with insight. +So you'll be required to install the following packages: +1. qemu +2. fuseext2 +3. insight + +Create gadjet.img. Refer to create-gadget-img for details. + +1.5.1 Initial setup of the VM: + +Copy usb_tests to the VM. +Copy the libusb library files to the VM (from /lib) + + +2: RUNNING THE UNIT TEST +----------------------- + +On the VM (or other Linux host) do: +export LD_LIBRARY_PATH= +run the tests script: ./usb_tests with relevant input parameters. (Refer to +unittests-info for additional information) + +-- +Created by a consultant of the Qualcomm Innovation Center, Inc. +The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. + -- 1.7.0.4 -- Sent by an employee of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/