Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751920Ab1FYQvp (ORCPT ); Sat, 25 Jun 2011 12:51:45 -0400 Received: from queueout04-winn.ispmail.ntl.com ([81.103.221.58]:32939 "EHLO queueout04-winn.ispmail.ntl.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751773Ab1FYQvj (ORCPT ); Sat, 25 Jun 2011 12:51:39 -0400 From: Daniel Drake To: tglx@linutronix.de, mingo@redhat.com, hpa@zytor.com, x86@kernel.org, akpm@linux-foundation.org Cc: linux-kernel@vger.kernel.org, dilinger@queued.net, bigeasy@linutronix.de, Daniel Drake Subject: [PATCH v3 08/11] x86, olpc-xo1-sci: Add lid switch functionality Date: Sat, 25 Jun 2011 17:34:15 +0100 Message-Id: <1309019658-1712-9-git-send-email-dsd@laptop.org> X-Mailer: git-send-email 1.7.5.4 In-Reply-To: <1309019658-1712-1-git-send-email-dsd@laptop.org> References: <1309019658-1712-1-git-send-email-dsd@laptop.org> X-Cloudmark-Analysis: v=1.1 cv=R50lirqlHffDPPkwUlkuVa99MrvKdVWo//yz83qex8g= c=1 sm=0 a=LrzjRJaOOPsA:10 a=vJ1w_8FsMGIA:10 a=Op-mwl0xAAAA:8 a=In_Hgl4hAAAA:8 a=XRJDNDRM7ZC5vxybvQAA:9 a=8vlz_MQLQWCzUMhW7PUA:7 a=d4CUUju0HPYA:10 a=ro211Ng2IWAA:10 a=HpAAvcLHHh0Zw7uRqdWCyQ==:117 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9330 Lines: 338 Configure the XO-1's lid switch GPIO to trigger an SCI interrupt, and correctly expose this input device which can be used as a wakeup source. Signed-off-by: Daniel Drake Acked-by: Andres Salomon --- arch/x86/Kconfig | 1 + arch/x86/platform/olpc/olpc-xo1-sci.c | 207 ++++++++++++++++++++++++++++++++- include/linux/cs5535.h | 1 + 3 files changed, 208 insertions(+), 1 deletions(-) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index f527dfd..f5bc969 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -2092,6 +2092,7 @@ config OLPC_XO1_SCI - EC-driven system wakeups - Power button - Ebook switch + - Lid switch endif # X86_32 diff --git a/arch/x86/platform/olpc/olpc-xo1-sci.c b/arch/x86/platform/olpc/olpc-xo1-sci.c index 63f5050..ad0670b 100644 --- a/arch/x86/platform/olpc/olpc-xo1-sci.c +++ b/arch/x86/platform/olpc/olpc-xo1-sci.c @@ -32,9 +32,26 @@ static unsigned long acpi_base; static struct input_dev *power_button_idev; static struct input_dev *ebook_switch_idev; +static struct input_dev *lid_switch_idev; static int sci_irq; +static bool lid_open; +static bool lid_inverted; +static int lid_wake_mode; + +enum lid_wake_modes { + LID_WAKE_ALWAYS, + LID_WAKE_OPEN, + LID_WAKE_CLOSE, +}; + +static const char * const lid_wake_mode_names[] = { + [LID_WAKE_ALWAYS] = "always", + [LID_WAKE_OPEN] = "open", + [LID_WAKE_CLOSE] = "close", +}; + /* Report current ebook switch state through input layer */ static void send_ebook_state(void) { @@ -49,6 +66,70 @@ static void send_ebook_state(void) input_sync(ebook_switch_idev); } +static void flip_lid_inverter(void) +{ + /* gpio is high; invert so we'll get l->h event interrupt */ + if (lid_inverted) + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_INPUT_INVERT); + else + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_INPUT_INVERT); + lid_inverted = !lid_inverted; +} + +static void detect_lid_state(void) +{ + /* + * the edge detector hookup on the gpio inputs on the geode is + * odd, to say the least. See http://dev.laptop.org/ticket/5703 + * for details, but in a nutshell: we don't use the edge + * detectors. instead, we make use of an anomoly: with the both + * edge detectors turned off, we still get an edge event on a + * positive edge transition. to take advantage of this, we use the + * front-end inverter to ensure that that's the edge we're always + * going to see next. + */ + + int state; + + state = cs5535_gpio_isset(OLPC_GPIO_LID, GPIO_READ_BACK); + lid_open = !state ^ !lid_inverted; /* x ^^ y */ + if (!state) + return; + + flip_lid_inverter(); +} + +/* Report current lid switch state through input layer */ +static void send_lid_state(void) +{ + input_report_switch(lid_switch_idev, SW_LID, !lid_open); + input_sync(lid_switch_idev); +} + +static ssize_t lid_wake_mode_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + const char *mode = lid_wake_mode_names[lid_wake_mode]; + return sprintf(buf, "%s\n", mode); +} +static ssize_t lid_wake_mode_set(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int i; + for (i = 0; i < ARRAY_SIZE(lid_wake_mode_names); i++) { + const char *mode = lid_wake_mode_names[i]; + if (strlen(mode) != count || strncasecmp(mode, buf, count)) + continue; + + lid_wake_mode = i; + return count; + } + return -EINVAL; +} +static DEVICE_ATTR(lid_wake_mode, S_IWUSR | S_IRUGO, lid_wake_mode_show, + lid_wake_mode_set); + /* * Process all items in the EC's SCI queue. * @@ -111,6 +192,11 @@ static irqreturn_t xo1_sci_intr(int irq, void *dev_id) schedule_work(&sci_work); } + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); + detect_lid_state(); + send_lid_state(); + return IRQ_HANDLED; } @@ -126,11 +212,32 @@ static int xo1_sci_suspend(struct platform_device *pdev, pm_message_t state) else olpc_ec_wakeup_clear(EC_SCI_SRC_EBOOK); + if (!device_may_wakeup(&lid_switch_idev->dev)) { + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + } else if ((lid_open && lid_wake_mode == LID_WAKE_OPEN) || + (!lid_open && lid_wake_mode == LID_WAKE_CLOSE)) { + flip_lid_inverter(); + + /* we may have just caused an event */ + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); + + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + } + return 0; } static int xo1_sci_resume(struct platform_device *pdev) { + /* + * We don't know what may have happened while we were asleep. + * Reestablish our lid setup so we're sure to catch all transitions. + */ + detect_lid_state(); + send_lid_state(); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + /* Enable all EC events */ olpc_ec_mask_write(EC_SCI_SRC_ALL); return 0; @@ -221,6 +328,43 @@ static void free_ec_sci(void) gpio_free(OLPC_GPIO_ECSCI); } +static int __devinit setup_lid_events(void) +{ + int r; + + r = gpio_request(OLPC_GPIO_LID, "OLPC-LID"); + if (r) + return r; + + gpio_direction_input(OLPC_GPIO_LID); + + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_INPUT_INVERT); + lid_inverted = 0; + + /* Clear edge detection and event enable for now */ + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_EN); + cs5535_gpio_clear(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_EN); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_NEGATIVE_EDGE_STS); + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_POSITIVE_EDGE_STS); + + /* Set the LID to cause an PME event on group 6 */ + cs5535_gpio_setup_event(OLPC_GPIO_LID, 6, 1); + + /* Set PME group 6 to fire the SCI interrupt */ + cs5535_gpio_set_irq(6, sci_irq); + + /* Enable the event */ + cs5535_gpio_set(OLPC_GPIO_LID, GPIO_EVENTS_ENABLE); + + return 0; +} + +static void free_lid_events(void) +{ + gpio_free(OLPC_GPIO_LID); +} + static int __devinit setup_power_button(struct platform_device *pdev) { int r; @@ -283,6 +427,50 @@ static void free_ebook_switch(void) input_free_device(ebook_switch_idev); } +static int __devinit setup_lid_switch(struct platform_device *pdev) +{ + int r; + + lid_switch_idev = input_allocate_device(); + if (!lid_switch_idev) + return -ENOMEM; + + lid_switch_idev->name = "Lid Switch"; + lid_switch_idev->phys = DRV_NAME "/input2"; + set_bit(EV_SW, lid_switch_idev->evbit); + set_bit(SW_LID, lid_switch_idev->swbit); + + lid_switch_idev->dev.parent = &pdev->dev; + device_set_wakeup_capable(&lid_switch_idev->dev, true); + + r = input_register_device(lid_switch_idev); + if (r) { + dev_err(&pdev->dev, "failed to register lid switch: %d\n", r); + goto err_register; + } + + r = device_create_file(&lid_switch_idev->dev, &dev_attr_lid_wake_mode); + if (r) { + dev_err(&pdev->dev, "failed to create wake mode attr: %d\n", r); + goto err_create_attr; + } + + return 0; + +err_create_attr: + input_unregister_device(lid_switch_idev); +err_register: + input_free_device(lid_switch_idev); + return r; +} + +static void free_lid_switch(void) +{ + device_remove_file(&lid_switch_idev->dev, &dev_attr_lid_wake_mode); + input_unregister_device(lid_switch_idev); + input_free_device(lid_switch_idev); +} + static int __devinit xo1_sci_probe(struct platform_device *pdev) { struct resource *res; @@ -311,12 +499,21 @@ static int __devinit xo1_sci_probe(struct platform_device *pdev) if (r) goto err_ebook; + r = setup_lid_switch(pdev); + if (r) + goto err_lid; + + r = setup_lid_events(); + if (r) + goto err_lidevt; + r = setup_ec_sci(); if (r) goto err_ecsci; /* Enable PME generation for EC-generated events */ - outl(CS5536_GPIOM7_PME_EN, acpi_base + CS5536_PM_GPE0_EN); + outl(CS5536_GPIOM6_PME_EN | CS5536_GPIOM7_PME_EN, + acpi_base + CS5536_PM_GPE0_EN); /* Clear pending events */ outl(0xffffffff, acpi_base + CS5536_PM_GPE0_STS); @@ -324,6 +521,8 @@ static int __devinit xo1_sci_probe(struct platform_device *pdev) /* Initial sync */ send_ebook_state(); + detect_lid_state(); + send_lid_state(); r = setup_sci_interrupt(pdev); if (r) @@ -337,6 +536,10 @@ static int __devinit xo1_sci_probe(struct platform_device *pdev) err_sci: free_ec_sci(); err_ecsci: + free_lid_events(); +err_lidevt: + free_lid_switch(); +err_lid: free_ebook_switch(); err_ebook: free_power_button(); @@ -349,6 +552,8 @@ static int __devexit xo1_sci_remove(struct platform_device *pdev) free_irq(sci_irq, pdev); cancel_work_sync(&sci_work); free_ec_sci(); + free_lid_events(); + free_lid_switch(); free_ebook_switch(); free_power_button(); acpi_base = 0; diff --git a/include/linux/cs5535.h b/include/linux/cs5535.h index d7e9a7f..72954c6 100644 --- a/include/linux/cs5535.h +++ b/include/linux/cs5535.h @@ -102,6 +102,7 @@ static inline int cs5535_pic_unreqz_select_high(unsigned int group, /* CS5536_PM_GPE0_EN bits */ #define CS5536_GPIOM7_PME_EN (1 << 31) +#define CS5536_GPIOM6_PME_EN (1 << 30) /* VSA2 magic values */ #define VSA_VRC_INDEX 0xAC1C -- 1.7.5.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/