Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756519Ab1F1KE1 (ORCPT ); Tue, 28 Jun 2011 06:04:27 -0400 Received: from metis.ext.pengutronix.de ([92.198.50.35]:41654 "EHLO metis.ext.pengutronix.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755952Ab1F1KC5 (ORCPT ); Tue, 28 Jun 2011 06:02:57 -0400 From: Sascha Hauer To: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, Arnd Bergmann , viresh kumar , Shawn Guo , Ryan Mallon , Sascha Hauer Subject: [PATCH 2/2] pwm: Add a i.MX23/28 pwm driver Date: Tue, 28 Jun 2011 12:02:48 +0200 Message-Id: <1309255368-9775-3-git-send-email-s.hauer@pengutronix.de> X-Mailer: git-send-email 1.7.5.3 In-Reply-To: <1309255368-9775-1-git-send-email-s.hauer@pengutronix.de> References: <1309255368-9775-1-git-send-email-s.hauer@pengutronix.de> X-SA-Exim-Connect-IP: 2001:6f8:1178:2:215:17ff:fe12:23b0 X-SA-Exim-Mail-From: sha@pengutronix.de X-SA-Exim-Scanned: No (on metis.ext.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: linux-kernel@vger.kernel.org Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7073 Lines: 295 Signed-off-by: Sascha Hauer --- drivers/pwm/mxs-pwm.c | 275 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 files changed, 275 insertions(+), 0 deletions(-) create mode 100644 drivers/pwm/mxs-pwm.c diff --git a/drivers/pwm/mxs-pwm.c b/drivers/pwm/mxs-pwm.c new file mode 100644 index 0000000..052cb0c --- /dev/null +++ b/drivers/pwm/mxs-pwm.c @@ -0,0 +1,275 @@ +/* + * Copyright (C) 2011 Pengutronix + * Sascha Hauer + * + * simple driver for PWM (Pulse Width Modulator) controller + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * Derived from pxa PWM driver by eric miao + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct mxs_pwm_device { + struct device *dev; + + struct clk *clk; + + int enabled; + void __iomem *mmio_base; + + unsigned int pwm_id; + + u32 val_active; + u32 val_period; + int period_us; + struct pwm_chip chip; +}; + +/* common register space */ +static void __iomem *pwm_base_common; +#define REG_PWM_CTRL 0x0 +#define PWM_SFTRST (1 << 31) +#define PWM_CLKGATE (1 << 30) +#define PWM_ENABLE(p) (1 << (p)) + +/* per pwm register space */ +#define REG_ACTIVE 0x0 +#define REG_PERIOD 0x10 + +#define PERIOD_PERIOD(p) ((p) & 0xffff) +#define PERIOD_ACTIVE_HIGH (3 << 16) +#define PERIOD_INACTIVE_LOW (2 << 18) +#define PERIOD_CDIV(div) (((div) & 0x7) << 20) + +static void pwm_update(struct mxs_pwm_device *pwm) +{ + writel(pwm->val_active, pwm->mmio_base + REG_ACTIVE); + writel(pwm->val_period, pwm->mmio_base + REG_PERIOD); +} + +#define to_mxs_pwm_device(chip) container_of(chip, struct mxs_pwm_device, chip) + +static int mxs_pwm_config(struct pwm_chip *chip, int duty_ns, int period_ns) +{ + struct mxs_pwm_device *pwm = to_mxs_pwm_device(chip); + int div = 0; + unsigned long rate; + unsigned long long c; + unsigned long period_cycles, duty_cycles; + + rate = clk_get_rate(pwm->clk); + + dev_dbg(pwm->dev, "config: duty_ns: %d, period_ns: %d (clkrate %ld)\n", + duty_ns, period_ns, rate); + + while (1) { + c = rate / (1 << div); + c = c * period_ns; + do_div(c, 1000000000); + if (c < 0x10000) + break; + div++; + + if (div > 8) + return -EINVAL; + } + + period_cycles = c; + duty_cycles = period_cycles * duty_ns / period_ns; + + dev_dbg(pwm->dev, "config period_cycles: %ld duty_cycles: %ld\n", + period_cycles, duty_cycles); + + pwm->val_active = period_cycles << 16 | duty_cycles; + pwm->val_period = PERIOD_PERIOD(period_cycles) | PERIOD_ACTIVE_HIGH | + PERIOD_INACTIVE_LOW | PERIOD_CDIV(div); + pwm->period_us = period_ns / 1000; + + pwm_update(pwm); + + return 0; +} + +static void __pwm_enable(struct mxs_pwm_device *pwm, int enable) +{ + if (enable) + __mxs_setl(PWM_ENABLE(pwm->chip.pwm_id), pwm_base_common + REG_PWM_CTRL); + else + __mxs_clrl(PWM_ENABLE(pwm->chip.pwm_id), pwm_base_common + REG_PWM_CTRL); +} + +static int mxs_pwm_enable(struct pwm_chip *chip) +{ + struct mxs_pwm_device *pwm = to_mxs_pwm_device(chip); + int ret = 0; + + dev_dbg(pwm->dev, "enable\n"); + + if (!pwm->enabled) { + ret = clk_enable(pwm->clk); + if (!ret) { + pwm->enabled = 1; + __pwm_enable(pwm, 1); + pwm_update(pwm); + } + } + return ret; +} + +static void mxs_pwm_disable(struct pwm_chip *chip) +{ + struct mxs_pwm_device *pwm = to_mxs_pwm_device(chip); + + dev_dbg(pwm->dev, "disable\n"); + + if (pwm->enabled) { + /* + * We need a little delay here, it takes one period for + * the last pwm_config call to take effect. If we disable + * the pwm too early it just freezes the current output + * state. + */ + usleep_range(pwm->period_us, pwm->period_us * 2); + __pwm_enable(pwm, 0); + clk_disable(pwm->clk); + pwm->enabled = 0; + } +} + +static struct pwm_ops mxs_pwm_ops = { + .enable = mxs_pwm_enable, + .disable = mxs_pwm_disable, + .config = mxs_pwm_config, +}; + +static int __devinit mxs_pwm_probe(struct platform_device *pdev) +{ + struct mxs_pwm_device *pwm; + struct resource *r; + int ret = 0; + + pwm = devm_kzalloc(&pdev->dev, sizeof(struct mxs_pwm_device), GFP_KERNEL); + if (pwm == NULL) { + dev_err(&pdev->dev, "failed to allocate memory\n"); + return -ENOMEM; + } + + pwm->clk = clk_get(&pdev->dev, NULL); + + if (IS_ERR(pwm->clk)) { + ret = PTR_ERR(pwm->clk); + goto err_free; + } + + pwm->chip.ops = &mxs_pwm_ops; + + pwm->enabled = 0; + + pwm->chip.pwm_id = pdev->id; + pwm->chip.owner = THIS_MODULE; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (r == NULL) { + dev_err(&pdev->dev, "no memory resource defined\n"); + ret = -ENODEV; + goto err_free_clk; + } + + r = request_mem_region(r->start, resource_size(r), pdev->name); + if (r == NULL) { + dev_err(&pdev->dev, "failed to request memory resource\n"); + ret = -EBUSY; + goto err_free_clk; + } + + pwm->mmio_base = ioremap(r->start, resource_size(r)); + if (pwm->mmio_base == NULL) { + dev_err(&pdev->dev, "failed to ioremap() registers\n"); + ret = -ENODEV; + goto err_free_mem; + } + + ret = pwmchip_add(&pwm->chip); + if (ret) + goto err_free_mem; + + platform_set_drvdata(pdev, pwm); + return 0; + +err_free_mem: + release_mem_region(r->start, resource_size(r)); +err_free_clk: + clk_put(pwm->clk); +err_free: + kfree(pwm); + return ret; +} + +static int __devexit mxs_pwm_remove(struct platform_device *pdev) +{ + struct mxs_pwm_device *pwm; + struct resource *r; + int ret; + + pwm = platform_get_drvdata(pdev); + + ret = pwmchip_remove(&pwm->chip); + if (ret) + return ret; + + iounmap(pwm->mmio_base); + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(r->start, resource_size(r)); + + clk_put(pwm->clk); + + return 0; +} + +static struct platform_driver mxs_pwm_driver = { + .driver = { + .name = "mxs-pwm", + }, + .probe = mxs_pwm_probe, + .remove = __devexit_p(mxs_pwm_remove), +}; + +static int __init mxs_pwm_init(void) +{ + if (cpu_is_mx28()) + pwm_base_common = MX28_IO_ADDRESS(MX28_PWM_BASE_ADDR); + else + pwm_base_common = MX23_IO_ADDRESS(MX23_PWM_BASE_ADDR); + + __mxs_clrl(PWM_SFTRST | PWM_CLKGATE, pwm_base_common + REG_PWM_CTRL); + + return platform_driver_register(&mxs_pwm_driver); +} +arch_initcall(mxs_pwm_init); + +static void __exit mxs_pwm_exit(void) +{ + platform_driver_unregister(&mxs_pwm_driver); +} +module_exit(mxs_pwm_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Sascha Hauer "); -- 1.7.5.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/