Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756748Ab2BCBPX (ORCPT ); Thu, 2 Feb 2012 20:15:23 -0500 Received: from mga14.intel.com ([143.182.124.37]:5244 "EHLO mga14.intel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754620Ab2BCBPU (ORCPT ); Thu, 2 Feb 2012 20:15:20 -0500 X-ExtLoop1: 1 X-IronPort-AV: E=Sophos;i="4.71,315,1320652800"; d="scan'208";a="102692485" Subject: Re: Regression 3.2 -> 3.3-rc1 10 sec hang at boot and resume, COMRESET failed From: Lin Ming To: "Srivatsa S. Bhat" Cc: Norbert Preining , linux-kernel@vger.kernel.org, jeff@garzik.org, Tejun Heo , "stern@rowland.harvard.edu >> Alan Stern" , linux-ide@vger.kernel.org, Linux PM mailing list , "Rafael J. Wysocki" In-Reply-To: <4F2A4B7E.2090503@linux.vnet.ibm.com> References: <20120202051258.GA15550@gamma.logic.tuwien.ac.at> <4F2A4B7E.2090503@linux.vnet.ibm.com> Content-Type: text/plain; charset="UTF-8" Date: Fri, 03 Feb 2012 09:15:16 +0800 Message-ID: <1328231716.15079.15.camel@minggr> Mime-Version: 1.0 X-Mailer: Evolution 2.30.3 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2924 Lines: 65 On Thu, 2012-02-02 at 14:08 +0530, Srivatsa S. Bhat wrote: > Adding some Cc's. > > On 02/02/2012 10:42 AM, Norbert Preining wrote: > > > Dear all, > > > > (please Cc) > > > > since going from 3.2 to 3.3-rc1 I see a kind of regression wrt booting > > time, namely the detection of the CD drive hangs for 10sec (both > > dmesg were taken on the same hardware on the same day): > > > > with 3.3-rc1 and rc2: > > [ 3.694012] sd 0:0:0:0: [sda] Attached SCSI disk > > [ 9.004013] ata2: link is slow to respond, please be patient (ready=0) > > [ 13.652013] ata2: COMRESET failed (errno=-16) > > [ 13.972022] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) I'm looking into this problem. But I can't reproduce this regression. Could you attach the full 3.3-rc2 dmesg? Thanks, Lin Ming > > [ 13.975721] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > > [ 13.977166] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33 > > [ 13.981294] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > > [ 13.982734] ata2.00: configured for UDMA/33 > > [ 13.987964] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.21 PQ: 0 ANSI: 5 > > [ 13.991482] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > > [ 13.992971] cdrom: Uniform CD-ROM driver Revision: 3.20 > > [ 13.994574] sr 1:0:0:0: Attached scsi CD-ROM sr0 > > [ 13.994672] sr 1:0:0:0: Attached scsi generic sg1 type 5 > > [ 14.316021] ata5: SATA link down (SStatus 0 SControl 300) > > [ 14.636019] ata6: SATA link down (SStatus 0 SControl 300) > > > > with 3.2: > > [ 3.218156] sd 0:0:0:0: [sda] Attached SCSI disk > > [ 3.484023] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) > > [ 3.487708] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > > [ 3.489156] ata2.00: ATAPI: MATSHITADVD-RAM UJ862AS, 1.21, max UDMA/33 > > [ 3.494321] ata2.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04) > > [ 3.495761] ata2.00: configured for UDMA/33 > > [ 3.501057] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ862AS 1.21 PQ: 0 ANSI: 5 > > [ 3.504515] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray > > [ 3.505995] cdrom: Uniform CD-ROM driver Revision: 3.20 > > [ 3.507611] sr 1:0:0:0: Attached scsi CD-ROM sr0 > > [ 3.507715] sr 1:0:0:0: Attached scsi generic sg1 type 5 > > [ 3.828025] ata5: SATA link down (SStatus 0 SControl 300) > > [ 4.148020] ata6: SATA link down (SStatus 0 SControl 300) > > > > > > Is there anything I can do here? > > > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/