Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755054Ab2BFMw4 (ORCPT ); Mon, 6 Feb 2012 07:52:56 -0500 Received: from ch1ehsobe005.messaging.microsoft.com ([216.32.181.185]:50968 "EHLO ch1outboundpool.messaging.microsoft.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754808Ab2BFMwz (ORCPT ); Mon, 6 Feb 2012 07:52:55 -0500 X-SpamScore: 3 X-BigFish: VPS3(zzc8kzz1202hzz8275bhz2dh2a8h668h839h93fh) X-Forefront-Antispam-Report: CIP:59.163.77.45;KIP:(null);UIP:(null);IPV:NLI;H:Outbound.kpitcummins.com;RD:59.163.77.45.static.vsnl.net.in;EFVD:NLI Subject: [PATCH 04/07] Backlight: Backlight module for DA9052/53 PMIC v1 From: Ashish Jangam To: CC: , , , , , Content-Type: text/plain; charset="UTF-8" Date: Mon, 6 Feb 2012 18:15:52 +0530 Message-ID: <1328532352.30549.79.camel@dhruva> MIME-Version: 1.0 X-Mailer: Evolution 2.28.3 Content-Transfer-Encoding: 7bit X-Originating-IP: [10.10.38.47] X-OriginatorOrg: kpitcummins.com Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6908 Lines: 247 DA9052/53 PMIC has capability to supply power for upto 3 banks of 6 white serial LEDS. It can also control intensity of independent banks and to drive these banks boost converter will provide up to 24V and forward current of max. 50mA. This patch allows to control intensity of the individual WLEDs bank through DA9052/53 PMIC. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen Signed-off-by: Ashish Jangam --- drivers/video/backlight/Kconfig | 6 + drivers/video/backlight/Makefile | 1 + drivers/video/backlight/da9052_bl.c | 187 +++++++++++++++++++++++++++++++++++ 3 files changed, 194 insertions(+), 0 deletions(-) create mode 100644 drivers/video/backlight/da9052_bl.c diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index 49e7d83..77a3942 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -245,6 +245,12 @@ config BACKLIGHT_DA903X If you have a LCD backlight connected to the WLED output of DA9030 or DA9034 WLED output, say Y here to enable this driver. +config BACKLIGHT_DA9052 + tristate "Dialog DA9052/DA9053 WLED" + depends on PMIC_DA9052 + help + Enable the Backlight Driver for DA9052-BC and DA9053-AA/Bx PMICs. + config BACKLIGHT_MAX8925 tristate "Backlight driver for MAX8925" depends on MFD_MAX8925 diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 0ee06e0..6622f34 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -28,6 +28,7 @@ obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o obj-$(CONFIG_BACKLIGHT_PWM) += pwm_bl.o obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o +obj-$(CONFIG_BACKLIGHT_DA9052) += da9052_bl.o obj-$(CONFIG_BACKLIGHT_MAX8925) += max8925_bl.o obj-$(CONFIG_BACKLIGHT_APPLE) += apple_bl.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c new file mode 100644 index 0000000..b628d68 --- /dev/null +++ b/drivers/video/backlight/da9052_bl.c @@ -0,0 +1,187 @@ +/* + * Backlight Driver for Dialog DA9052 PMICs + * + * Copyright(c) 2012 Dialog Semiconductor Ltd. + * + * Author: David Dajun Chen + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + */ + +#include +#include +#include +#include +#include + +#include +#include + +#define DA9052_MAX_BRIGHTNESS 0xFF + +enum { + DA9052_WLEDS_OFF, + DA9052_WLEDS_ON, +}; + +enum { + DA9052_TYPE_WLED1, + DA9052_TYPE_WLED2, + DA9052_TYPE_WLED3, +}; + +static unsigned char wled_bank[] = { + DA9052_LED1_CONF_REG, + DA9052_LED2_CONF_REG, + DA9052_LED3_CONF_REG, +}; + +struct da9052_bl { + struct da9052 *da9052; + uint brightness; + uint state; + uint led_reg; +}; + +static int da9052_adjust_wled_brightness(struct da9052_bl *wleds) +{ + unsigned char boost_en; + unsigned char i_sink; + int ret; + + boost_en = 0x3F; + i_sink = 0xFF; + if (wleds->state == DA9052_WLEDS_OFF) { + boost_en = 0x00; + i_sink = 0x00; + } + + ret = da9052_reg_write(wleds->da9052, DA9052_BOOST_REG, boost_en); + if (ret < 0) + return ret; + + ret = da9052_reg_write(wleds->da9052, DA9052_LED_CONT_REG, i_sink); + if (ret < 0) + return ret; + + ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg], 0x0); + if (ret < 0) + return ret; + + msleep(10); + + if (wleds->brightness) { + ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg], + wleds->brightness); + if (ret < 0) + return ret; + } + + return 0; +} + +static int da9052_backlight_update_status(struct backlight_device *bl) +{ + int brightness = bl->props.brightness; + struct da9052_bl *wleds = bl_get_data(bl); + + wleds->brightness = brightness; + wleds->state = DA9052_WLEDS_ON; + + return da9052_adjust_wled_brightness(wleds); +} + +static int da9052_backlight_get_brightness(struct backlight_device *bl) +{ + struct da9052_bl *wleds = bl_get_data(bl); + + return wleds->brightness; +} + +static const struct backlight_ops da9052_backlight_ops = { + .update_status = da9052_backlight_update_status, + .get_brightness = da9052_backlight_get_brightness, +}; + +static int da9052_backlight_probe(struct platform_device *pdev) +{ + struct backlight_device *bl; + struct backlight_properties props; + struct da9052_bl *wleds; + + wleds = devm_kzalloc(&pdev->dev, sizeof(struct da9052_bl), GFP_KERNEL); + if (!wleds) + return -ENOMEM; + + wleds->da9052 = dev_get_drvdata(pdev->dev.parent); + wleds->brightness = 0; + wleds->led_reg = platform_get_device_id(pdev)->driver_data; + wleds->state = DA9052_WLEDS_OFF; + + props.type = BACKLIGHT_RAW; + props.max_brightness = DA9052_MAX_BRIGHTNESS; + + bl = backlight_device_register(pdev->name, wleds->da9052->dev, wleds, + &da9052_backlight_ops, &props); + if (IS_ERR(bl)) { + dev_err(&pdev->dev, "Failed to register backlight\n"); + devm_kfree(&pdev->dev, wleds); + return PTR_ERR(bl); + } + + bl->props.max_brightness = DA9052_MAX_BRIGHTNESS; + bl->props.brightness = 0; + platform_set_drvdata(pdev, bl); + + return da9052_adjust_wled_brightness(wleds); +} + +static int da9052_backlight_remove(struct platform_device *pdev) +{ + struct backlight_device *bl = platform_get_drvdata(pdev); + struct da9052_bl *wleds = bl_get_data(bl); + + wleds->brightness = 0; + wleds->state = DA9052_WLEDS_OFF; + da9052_adjust_wled_brightness(wleds); + backlight_device_unregister(bl); + devm_kfree(&pdev->dev, wleds); + + return 0; +} + +static struct platform_device_id da9052_wled_ids[] = { + { + .name = "da9052-wled1", + .driver_data = DA9052_TYPE_WLED1, + }, + { + .name = "da9052-wled2", + .driver_data = DA9052_TYPE_WLED2, + }, + { + .name = "da9052-wled3", + .driver_data = DA9052_TYPE_WLED3, + }, +}; + +static struct platform_driver da9052_wled_driver = { + .probe = da9052_backlight_probe, + .remove = da9052_backlight_remove, + .id_table = da9052_wled_ids, + .driver = { + .name = "da9052-wled", + .owner = THIS_MODULE, + }, +}; + +module_platform_driver(da9052_wled_driver); + +MODULE_AUTHOR("David Dajun Chen "); +MODULE_DESCRIPTION("Backlight driver for DA9052 PMIC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:da9052-backlight"); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/