Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756169Ab2BGDeX (ORCPT ); Mon, 6 Feb 2012 22:34:23 -0500 Received: from mail-tul01m020-f174.google.com ([209.85.214.174]:42298 "EHLO mail-tul01m020-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755996Ab2BGDeW (ORCPT ); Mon, 6 Feb 2012 22:34:22 -0500 MIME-Version: 1.0 Date: Tue, 7 Feb 2012 11:34:21 +0800 Message-ID: Subject: mmc sdhci mmcblk0: error -110 sending status command, retrying From: Jeff Chua To: Adrian Hunter , Chris Ball , Pierre Ossman Cc: lkml Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3836 Lines: 94 The SD slot on the Lenovo X220 is doesn't seems to work on Linux-3.3.0-rc2. I haven't use SD for a while, so don't know which linux version will work on the X220. # cat .config CONFIG_MMC=m CONFIG_MMC_DEBUG=y CONFIG_MMC_CLKGATE=y CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_MMC_SDHCI=m CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y # lspcpi -v 0d:00.0 System peripheral: Ricoh Co Ltd Device e823 (rev 04) (prog-if 01) Subsystem: Lenovo Device 21da Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at f1500000 (32-bit, non-prefetchable) [size=256] Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+ Capabilities: [78] Power Management version 3 Capabilities: [80] Express Endpoint, MSI 00 Kernel driver in use: sdhci-pci Kernel modules: sdhci-pci # dmesg sdhci: Secure Digital Host Controller Interface driver sdhci: Copyright(c) Pierre Ossman sdhci-pci 0000:0d:00.0: SDHCI controller found [1180:e823] (rev 4) sdhci-pci 0000:0d:00.0: found 1 slot(s) sdhci [sdhci_add_host()]: mmc0: Auto-CMD23 unavailable sdhci: =========== REGISTER DUMP (mmc0)=========== sdhci: Sys addr: 0x00000000 | Version: 0x00000502 sdhci: Blk size: 0x00000000 | Blk cnt: 0x00000000 sdhci: Argument: 0x00000000 | Trn mode: 0x00000000 sdhci: Present: 0x01f70000 | Host ctl: 0x00000000 sdhci: Power: 0x00000000 | Blk gap: 0x00000000 sdhci: Wake-up: 0x00000000 | Clock: 0x00000000 sdhci: Timeout: 0x00000000 | Int stat: 0x00000000 sdhci: Int enab: 0x00ff0003 | Sig enab: 0x00ff0003 sdhci: AC12 err: 0x00000000 | Slot int: 0x00000000 sdhci: Caps: 0x21e832b2 | Caps_1: 0x00008073 sdhci: Cmd: 0x00000000 | Max curr: 0x00000040 sdhci: Host ctl2: 0x00000000 sdhci: =========================================== mmc0: req done (CMD18): 0: 00000900 00000000 00000000 00000000 mmc0: 0 bytes transferred: -84 mmc0: (CMD12): -110: 00000000 00000000 00000000 00000000 mmc0: starting CMD13 arg b3680000 flags 00000195 sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00018000 mmc0: req done (CMD13): -110: 00000000 00000000 00000000 00000000 mmcblk0: error -110 sending status command, retrying mmc0: starting CMD13 arg b3680000 flags 00000195 sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00018000 mmc0: req done (CMD13): -110: 00000000 00000000 00000000 00000000 mmcblk0: error -110 sending status command, retrying mmc0: starting CMD13 arg b3680000 flags 00000195 sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001 mmc0: req done (CMD13): 0: 00800b00 00000000 00000000 00000000 mmc0: starting CMD12 arg 00000000 flags 0000049d sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000003 mmc0: req done (CMD12): 0: 00000b00 00000000 00000000 00000000 mmcblk0: error -110 sending stop command, original cmd response 0x900, card status 0x800b00 mmcblk0: error -84 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00 mmcblk0: retrying using single block read mmc0: starting CMD17 arg 00000000 flags 000000b5 mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0 sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001 sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002 mmc0: req done (CMD17): 0: 00000900 00000000 00000000 00000000 mmc0: 512 bytes transferred: 0 mmc0: starting CMD17 arg 00000001 flags 000000b5 mmc0: blksz 512 blocks 1 flags 00000200 tsac 100 ms nsac 0 sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000001 sdhci [sdhci_irq()]: *** mmc0 got interrupt: 0x00000002 Any help will be very much appreciated. Thanks, Jeff -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/