Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 6 Aug 2002 14:51:59 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 6 Aug 2002 14:51:58 -0400 Received: from host.greatconnect.com ([209.239.40.135]:13829 "EHLO host.greatconnect.com") by vger.kernel.org with ESMTP id ; Tue, 6 Aug 2002 14:51:58 -0400 Subject: OSB4 issues on 2.4.19-ac4 From: Samuel Flory To: Alan Cox Cc: linux-kernel@vger.kernel.org Content-Type: text/plain Content-Transfer-Encoding: 7bit X-Mailer: Ximian Evolution 1.0.3 (1.0.3-6) Date: 06 Aug 2002 11:55:21 -0700 Message-Id: <1028660121.4771.1242.camel@flory.corp.rackablelabs.com> Mime-Version: 1.0 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2592 Lines: 63 It appears that the OSB4 ide controller isn't working on ac4. I have a Tyan 2515, and 2518 which hang when dma is enabled. The 2518 hangs on a "hdparm -t /dev/hda" after enabling dma: Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx SvrWks OSB4: IDE controller on PCI bus 00 dev 79 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: Maxtor 5T040H4, ATA DISK drive hdc: Maxtor 5T040H4, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=4982/255/63 hdc: host protected area => 1 hdc: setmax LBA 80043264, native 78125000 hdc: 78125000 sectors (40000 MB) w/2048KiB Cache, CHS=77504/16/63 ide-floppy driver 0.99.newide Partition check: hda: unknown partition table hdc: unknown partition table 2515 hangs on a "hdparm -t /dev/hda" after enabling dma: Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PDC20267: IDE controller on PCI bus 00 dev 18 PDC20267: chipset revision 2 PDC20267: not 100% native mode: will probe irqs later PDC20267: ROM enabled at 0xfeae0000 PDC20267: (U)DMA Burst Bit ENABLED Primary MASTER Mode Secondary MASTER Mode. ide2: BM-DMA at 0xdf00-0xdf07, BIOS settings: hde:pio, hdf:pio ide3: BM-DMA at 0xdf08-0xdf0f, BIOS settings: hdg:pio, hdh:pio SvrWks OSB4: IDE controller on PCI bus 00 dev 79 SvrWks OSB4: chipset revision 0 SvrWks OSB4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: ST320410A, ATA DISK drive hdc: ST320410A, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 ide1 at 0x170-0x177,0x376 on irq 15 hda: host protected area => 1 hda: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=2434/255/63 hdc: host protected area => 1 hdc: 39102336 sectors (20020 MB) w/2048KiB Cache, CHS=38792/16/63 ide-floppy driver 0.99.newide Partition check: hda: hda1 hda2 hda3 hdc: [PTBL] [2434/255/63] hdc1 hdc2 hdc3 - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/