Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756375Ab2BWO0t (ORCPT ); Thu, 23 Feb 2012 09:26:49 -0500 Received: from newsmtp5.atmel.com ([204.2.163.5]:24076 "EHLO sjogate2.atmel.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756348Ab2BWO0r (ORCPT ); Thu, 23 Feb 2012 09:26:47 -0500 From: Nicolas Ferre To: plagnioj@jcrosoft.com, linux-arm-kernel@lists.infradead.org Cc: linux-kernel@vger.kernel.org, rmallon@gmail.com, linux@arm.linux.org.uk, arnd@arndb.de Subject: [PATCH v3 07/21] ARM: at91/pm_slowclock: function slow_clock() accepts parameters Date: Thu, 23 Feb 2012 15:25:51 +0100 Message-Id: <8ff12ad3df62ee343d5f5ec29572b9d2c5c2cedd.1330006537.git.nicolas.ferre@atmel.com> X-Mailer: git-send-email 1.7.9 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4705 Lines: 151 From: Jean-Christophe PLAGNIOL-VILLARD Change slow_clock()/at91_slow_clock() prototype to accept the PMC base address and one or two RAM controller addresses by parameters. The r0, r1 and r2 registers are used differently and preserved during function call. Those values are defined in pm.c and slow_clock() function is called from there with its new parameters. This will allow to have a soc independent pm_slowclock. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD Ached-by: Nicolas Ferre --- arch/arm/mach-at91/pm.c | 20 +++++++++++++++-- arch/arm/mach-at91/pm_slowclock.S | 41 ++++++++---------------------------- 2 files changed, 26 insertions(+), 35 deletions(-) diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index d554e67..aac00ce 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -188,13 +188,27 @@ int at91_suspend_entering_slow_clock(void) EXPORT_SYMBOL(at91_suspend_entering_slow_clock); -static void (*slow_clock)(void); +static void (*slow_clock)(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1); #ifdef CONFIG_AT91_SLOW_CLOCK -extern void at91_slow_clock(void); +extern void at91_slow_clock(void __iomem *pmc, void __iomem *ramc0, void __iomem *ramc1); extern u32 at91_slow_clock_sz; #endif +static void __iomem *at91_pmc_base = (void __iomem*)(AT91_VA_BASE_SYS + AT91_PMC); +#ifdef CONFIG_ARCH_AT91RM9200 +static void __iomem *at91_ramc0_base = (void __iomem*)AT91_VA_BASE_SYS; +#elif defined(CONFIG_ARCH_AT91SAM9G45) +static void __iomem *at91_ramc0_base = (void __iomem*)(AT91_VA_BASE_SYS + AT91_DDRSDRC0); +#else +static void __iomem *at91_ramc0_base = (void __iomem*)(AT91_VA_BASE_SYS + AT91_SDRAMC0); +#endif + +#if defined(CONFIG_ARCH_AT91SAM9G45) +static void __iomem *at91_ramc1_base = (void __iomem*)(AT91_VA_BASE_SYS + AT91_DDRSDRC1); +#else +static void __iomem *at91_ramc1_base = NULL; +#endif static int at91_pm_enter(suspend_state_t state) { @@ -232,7 +246,7 @@ static int at91_pm_enter(suspend_state_t state) /* copy slow_clock handler to SRAM, and call it */ memcpy(slow_clock, at91_slow_clock, at91_slow_clock_sz); #endif - slow_clock(); + slow_clock(at91_pmc_base, at91_ramc0_base, at91_ramc1_base); break; } else { pr_info("AT91: PM - no slow clock mode enabled ...\n"); diff --git a/arch/arm/mach-at91/pm_slowclock.S b/arch/arm/mach-at91/pm_slowclock.S index c802d30..e31a5f2 100644 --- a/arch/arm/mach-at91/pm_slowclock.S +++ b/arch/arm/mach-at91/pm_slowclock.S @@ -46,11 +46,11 @@ #define PLLALOCK_TIMEOUT 1000 #define PLLBLOCK_TIMEOUT 1000 -pmc .req r1 -sdramc .req r2 +pmc .req r0 +sdramc .req r1 +ramc1 .req r2 tmp1 .req r3 tmp2 .req r4 -ramc1 .req r5 /* * Wait until master clock is ready (after switching master clock source) @@ -110,21 +110,19 @@ ramc1 .req r5 .text +/* void at91_slow_clock(void __iomem *pmc, void __iomem *sdramc, void __iomem *ramc1) */ ENTRY(at91_slow_clock) /* Save registers on stack */ - stmfd sp!, {r0 - r12, lr} + stmfd sp!, {r3 - r12, lr} /* * Register usage: - * R1 = Base address of AT91_PMC - * R2 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * R0 = Base address of AT91_PMC + * R1 = Base address of RAM Controller (SDRAM, DDRSDR, or AT91_SYS) + * R2 = Base address of second RAM Controller or 0 if not present * R3 = temporary register * R4 = temporary register - * R5 = Base address of second RAM Controller or 0 if not present */ - ldr pmc, .at91_va_base_pmc - ldr sdramc, .at91_va_base_sdramc - ldr ramc1, .at91_va_base_ramc1 /* Drain write buffer */ mov tmp1, #0 @@ -283,7 +281,7 @@ ENTRY(at91_slow_clock) #endif /* Restore registers, and return */ - ldmfd sp!, {r0 - r12, pc} + ldmfd sp!, {r3 - r12, pc} .saved_mckr: @@ -301,26 +299,5 @@ ENTRY(at91_slow_clock) .saved_sam9_lpr1: .word 0 -.at91_va_base_pmc: - .word AT91_VA_BASE_SYS + AT91_PMC - -#ifdef CONFIG_ARCH_AT91RM9200 -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS -#elif defined(CONFIG_ARCH_AT91SAM9G45) -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_DDRSDRC0 -#else -.at91_va_base_sdramc: - .word AT91_VA_BASE_SYS + AT91_SDRAMC0 -#endif - -.at91_va_base_ramc1: -#if defined(CONFIG_ARCH_AT91SAM9G45) - .word AT91_VA_BASE_SYS + AT91_DDRSDRC1 -#else - .word 0 -#endif - ENTRY(at91_slow_clock_sz) .word .-at91_slow_clock -- 1.7.9 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/