Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757643Ab2BYTLI (ORCPT ); Sat, 25 Feb 2012 14:11:08 -0500 Received: from sabe.cs.wisc.edu ([128.105.6.20]:49252 "EHLO sabe.cs.wisc.edu" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756808Ab2BYTLG (ORCPT ); Sat, 25 Feb 2012 14:11:06 -0500 Message-ID: <4F493238.4020907@cs.wisc.edu> Date: Sat, 25 Feb 2012 13:10:48 -0600 From: Mike Christie User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:10.0.1) Gecko/20120216 Thunderbird/10.0.1 MIME-Version: 1.0 To: Santosh Y CC: James.Bottomley@hansenpartnership.com, linux-scsi@vger.kernel.org, linux-kernel@vger.kernel.org, patches@linaro.org, linux-samsung-soc@vger.kernel.org, arnd@linaro.org, girish.shivananjappa@linaro.org, saugata.das@linaro.org, vishak.g@samsung.com, venkat@linaro.org, k.rajesh@samsung.com, yejin.moon@samsung.com, dsaxena@linaro.org, ilho215.lee@samsung.com, nala.la@samsung.com, stephen.doel@linaro.org, sreekumar.c@samsung.com, Vinayak Holikatti Subject: Re: [PATCH v2 2/5] [SCSI] ufshcd: UFS UTP Transfer requests handling References: <1330067945-9128-1-git-send-email-santoshsy@gmail.com> <1330067945-9128-3-git-send-email-santoshsy@gmail.com> In-Reply-To: <1330067945-9128-3-git-send-email-santoshsy@gmail.com> Content-Type: text/plain; charset=ISO-8859-1 Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 21120 Lines: 709 On 02/24/2012 01:19 AM, Santosh Y wrote: > From: Santosh Yaraganavi > > This patch adds support for Transfer request handling. > > ufshcd includes following implementations: > - SCSI queuecommand > - Compose UPIU(UFS Protocol information unit) > - Issue commands to UFS host controller > - Handle completed commands > > Signed-off-by: Santosh Yaraganavi > Signed-off-by: Vinayak Holikatti > Reviewed-by: Arnd Bergmann > Reviewed-by: Vishak G > Reviewed-by: Girish K S > --- > v1 -> v2: > - Use bitops.h defined functions to perform bit operations. > Ex: set_bit(), __set_bit, clear_bit... > - ufshcd_map_sg(): remove BUG_ON on scsi_dma_map() failure > and return error value. > - ufshcd_compose_upiu(): add missing break in switch case, > remove unused parameter "hba". > - ufshcd_slave_alloc(): set sdev->use_10_for_ms = 1, since UFS > does not support MODE_SENSE_6. > - ufshcd_scsi_cmd_status(): add missing break in switch case. > Add ufshcd_adjust_lun_qdepth to adjust LUN queue depth > if SAM_STAT_TASK_SET_FULL is received from the device. > - ufshcd_transfer_rsp_status(): combine cases with same error code. > > drivers/scsi/ufs/ufshcd.c | 500 +++++++++++++++++++++++++++++++++++++++++++++ > 1 files changed, 500 insertions(+), 0 deletions(-) > > diff --git a/drivers/scsi/ufs/ufshcd.c b/drivers/scsi/ufs/ufshcd.c > index abf617e..e4335f5 100644 > --- a/drivers/scsi/ufs/ufshcd.c > +++ b/drivers/scsi/ufs/ufshcd.c > @@ -63,6 +63,7 @@ > #include > #include > #include > +#include > #include > > #include "ufs.h" > @@ -75,6 +76,8 @@ enum { > UFSHCD_MAX_CHANNEL = 0, > UFSHCD_MAX_ID = 1, > UFSHCD_MAX_LUNS = 8, > + UFSHCD_CMD_PER_LUN = 32, > + UFSHCD_CAN_QUEUE = 32, Is the can queue right, or are you working around a issue in the shared tag map code, or is this due to how you are tracking outstanding reqs (just a unsigned long so limited by that)? Can you support multiple luns per host? If so, this seems low for normal HBAs. Is this low due to the hw or something? If you have multiple luns then you are going to get a burst of 32 IOs and the host will work on them, then when those are done we will send IO to the next device, then repeat. For normal HBAs we would have can_queue = cmd_per_lun * X, so we can do IO on X devices at the same time. > }; > > /* UFSHCD states */ > @@ -128,6 +131,7 @@ struct uic_command { > * @host: Scsi_Host instance of the driver > * @pdev: PCI device handle > * @lrb: local reference block > + * @outstanding_reqs: Bits representing outstanding transfer requests > * @capabilities: UFS Controller Capabilities > * @nutrs: Transfer Request Queue depth supported by controller > * @nutmrs: Task Management Queue depth supported by controller > @@ -154,6 +158,8 @@ struct ufs_hba { > > struct ufshcd_lrb *lrb; > > + unsigned long outstanding_reqs; > + > u32 capabilities; > int nutrs; > int nutmrs; > @@ -174,12 +180,28 @@ struct ufs_hba { > * @ucd_cmd_ptr: UCD address of the command > * @ucd_rsp_ptr: Response UPIU address for this command > * @ucd_prdt_ptr: PRDT address of the command > + * @cmd: pointer to SCSI command > + * @sense_buffer: pointer sense buffer address of the SCSI command > + * @sense_bufflen: Length of the sense buffer > + * @scsi_status: SCSI status of the command > + * @command_type: SCSI, UFS, Query. > + * @task_tag: Task tag of the command > + * @lun: LUN of the command > */ > struct ufshcd_lrb { > struct utp_transfer_req_desc *utr_descriptor_ptr; > struct utp_upiu_cmd *ucd_cmd_ptr; > struct utp_upiu_rsp *ucd_rsp_ptr; > struct ufshcd_sg_entry *ucd_prdt_ptr; > + > + struct scsi_cmnd *cmd; > + u8 *sense_buffer; > + unsigned int sense_bufflen; > + int scsi_status; > + > + int command_type; > + int task_tag; > + unsigned int lun; > }; > > /** > @@ -206,6 +228,18 @@ static inline int ufshcd_is_device_present(u32 reg_hcs) > } > > /** > + * ufshcd_get_tr_ocs - Get the UTRD Overall Command Status > + * @lrb: pointer to local command reference block > + * > + * This function is used to get the OCS field from UTRD > + * Returns the OCS field in the UTRD > + */ > +static inline int ufshcd_get_tr_ocs(struct ufshcd_lrb *lrbp) > +{ > + return lrbp->utr_descriptor_ptr->header.dword_2 & MASK_OCS; > +} > + > +/** > * ufshcd_get_lists_status - Check UCRDY, UTRLRDY and UTMRLRDY > * @reg: Register value of host controller status > * > @@ -273,6 +307,36 @@ static inline void ufshcd_free_hba_memory(struct ufs_hba *hba) > } > > /** > + * ufshcd_is_valid_req_rsp - checks if controller TR response is valid > + * @ucd_rsp_ptr: pointer to response UPIU > + * > + * This function checks the response UPIU for valid transaction type in > + * response field > + * Returns 0 on success, non-zero on failure > + */ > +static inline int > +ufshcd_is_valid_req_rsp(struct utp_upiu_rsp *ucd_rsp_ptr) > +{ > + return ((be32_to_cpu(ucd_rsp_ptr->header.dword_0) >> 24) == > + UPIU_TRANSACTION_RESPONSE) ? 0 : > + (DID_ERROR << 16 | > + COMMAND_COMPLETE << 8); > +} > + > +/** > + * ufshcd_get_rsp_upiu_result - Get the result from response UPIU > + * @ucd_rsp_ptr: pointer to response UPIU > + * > + * This function gets the response status and scsi_status from response UPIU > + * Returns the response result code. > + */ > +static inline int > +ufshcd_get_rsp_upiu_result(struct utp_upiu_rsp *ucd_rsp_ptr) > +{ > + return be32_to_cpu(ucd_rsp_ptr->header.dword_1) & MASK_RSP_UPIU_RESULT; > +} > + > +/** > * ufshcd_config_int_aggr - Configure interrupt aggregation values > * currently there is no use case where we want to configure > * interrupt aggregation dynamically. So to configure interrupt > @@ -348,6 +412,34 @@ static inline int ufshcd_is_hba_active(struct ufs_hba *hba) > } > > /** > + * ufshcd_send_command - Send SCSI or device management commands > + * @hba: per adapter instance > + * @task_tag: Task tag of the command > + */ > +static inline > +void ufshcd_send_command(struct ufs_hba *hba, unsigned int task_tag) > +{ > + __set_bit(task_tag, &hba->outstanding_reqs); > + writel((1 << task_tag), > + (hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL)); > +} > + > +/** > + * ufshcd_copy_sense_data - Copy sense data in case of check condition > + * @lrb - pointer to local reference block > + */ > +static inline void ufshcd_copy_sense_data(struct ufshcd_lrb *lrbp) > +{ > + int len; > + if (lrbp->sense_buffer) { > + len = be16_to_cpu(lrbp->ucd_rsp_ptr->sense_data_len); > + memcpy(lrbp->sense_buffer, > + lrbp->ucd_rsp_ptr->sense_data, > + min_t(int, len, SCSI_SENSE_BUFFERSIZE)); > + } > +} > + > +/** > * ufshcd_hba_capabilities - Read controller capabilities > * @hba: per adapter instance > */ > @@ -384,6 +476,46 @@ ufshcd_send_uic_command(struct ufs_hba *hba, struct uic_command *uic_cmnd) > } > > /** > + * ufshcd_map_sg - Map scatter-gather list to prdt > + * @lrbp - pointer to local reference block > + * > + * Returns 0 in case of success, non-zero value in case of failure > + */ > +static int ufshcd_map_sg(struct ufshcd_lrb *lrbp) > +{ > + struct ufshcd_sg_entry *prd_table; > + struct scatterlist *sg; > + struct scsi_cmnd *cmd; > + int sg_segments; > + int i; > + > + cmd = lrbp->cmd; > + sg_segments = scsi_dma_map(cmd); > + if (sg_segments < 0) > + return sg_segments; > + > + if (sg_segments) { > + lrbp->utr_descriptor_ptr->prd_table_length = > + cpu_to_le16((u16) (sg_segments)); > + > + prd_table = (struct ufshcd_sg_entry *)lrbp->ucd_prdt_ptr; > + > + scsi_for_each_sg(cmd, sg, sg_segments, i) { > + prd_table[i].size = > + cpu_to_le32(((u32) sg_dma_len(sg))-1); > + prd_table[i].base_addr = > + cpu_to_le32(sg->dma_address); > + prd_table[i].upper_addr = > + cpu_to_le32((sg->dma_address >> 32)); > + } > + } else { > + lrbp->utr_descriptor_ptr->prd_table_length = 0; > + } > + > + return 0; > +} > + > +/** > * ufshcd_int_config - enable/disable interrupts > * @hba: per adapter instance > * @option: interrupt option > @@ -407,6 +539,127 @@ static void ufshcd_int_config(struct ufs_hba *hba, u32 option) > } > > /** > + * ufshcd_compose_upiu - form UFS Protocol Information Unit(UPIU) > + * @lrb - pointer to local reference block > + */ > +static void ufshcd_compose_upiu(struct ufshcd_lrb *lrbp) > +{ > + struct utp_transfer_req_desc *req_desc; > + struct utp_upiu_cmd *ucd_cmd_ptr; > + u32 data_direction; > + u32 upiu_flags; > + > + ucd_cmd_ptr = lrbp->ucd_cmd_ptr; > + req_desc = lrbp->utr_descriptor_ptr; > + > + switch (lrbp->command_type) { > + case UTP_CMD_TYPE_SCSI: > + if (lrbp->cmd->sc_data_direction == DMA_FROM_DEVICE) { > + data_direction = UTP_DEVICE_TO_HOST; > + upiu_flags = UPIU_CMD_FLAGS_READ; > + } else if (lrbp->cmd->sc_data_direction == DMA_TO_DEVICE) { > + data_direction = UTP_HOST_TO_DEVICE; > + upiu_flags = UPIU_CMD_FLAGS_WRITE; > + } else { > + data_direction = UTP_NO_DATA_TRANSFER; > + upiu_flags = UPIU_CMD_FLAGS_NONE; > + } > + > + /* Transfer request descriptor header fields */ > + req_desc->header.dword_0 = > + cpu_to_le32(data_direction | UTP_SCSI_COMMAND); > + > + /* > + * assigning invalid value for command status. Controller > + * updates OCS on command completion, with the command > + * status > + */ > + req_desc->header.dword_2 = > + cpu_to_le32(OCS_INVALID_COMMAND_STATUS); > + > + /* command descriptor fields */ > + ucd_cmd_ptr->header.dword_0 = > + cpu_to_be32(UPIU_HEADER_DWORD(UPIU_TRANSACTION_COMMAND, > + upiu_flags, > + lrbp->lun, > + lrbp->task_tag)); > + ucd_cmd_ptr->header.dword_1 = > + cpu_to_be32( > + UPIU_HEADER_DWORD(UPIU_COMMAND_SET_TYPE_SCSI, > + 0, > + 0, > + 0)); > + > + /* Total EHS length and Data segment length will be zero */ > + ucd_cmd_ptr->header.dword_2 = 0; > + > + ucd_cmd_ptr->exp_data_transfer_len = > + cpu_to_be32(lrbp->cmd->transfersize); > + > + memcpy(ucd_cmd_ptr->cdb, > + lrbp->cmd->cmnd, > + (min_t(unsigned short, > + lrbp->cmd->cmd_len, > + MAX_CDB_SIZE))); > + break; > + case UTP_CMD_TYPE_DEV_MANAGE: > + /* For query function implementation */ > + break; > + case UTP_CMD_TYPE_UFS: > + /* For UFS native command implementation */ > + break; > + } /* end of switch, command_type */ > +} > + > +/** > + * ufshcd_queuecommand - main entry point for SCSI requests > + * @cmd: command from SCSI Midlayer > + * @done: call back function > + * > + * Returns 0 for success, non-zero in case of failure > + */ > +static int ufshcd_queuecommand(struct Scsi_Host *host, struct scsi_cmnd *cmd) > +{ > + struct ufshcd_lrb *lrbp; > + struct ufs_hba *hba; > + unsigned long flags; > + int tag; > + int err = 0; > + > + hba = (struct ufs_hba *) &host->hostdata[0]; Use shost_priv instead of accessing hostdata. Check the rest of the driver for this. > + > + tag = cmd->request->tag; > + > + if (hba->ufshcd_state != UFSHCD_STATE_OPERATIONAL) { > + err = SCSI_MLQUEUE_HOST_BUSY; > + goto out; > + } > + > + lrbp = &hba->lrb[tag]; > + > + lrbp->cmd = cmd; > + lrbp->sense_bufflen = SCSI_SENSE_BUFFERSIZE; > + lrbp->sense_buffer = cmd->sense_buffer; > + lrbp->task_tag = tag; > + lrbp->lun = cmd->device->lun; > + > + lrbp->command_type = UTP_CMD_TYPE_SCSI; > + > + /* form UPIU before issuing the command */ > + ufshcd_compose_upiu(lrbp); > + err = ufshcd_map_sg(lrbp); > + if (err) > + goto out; > + > + /* issue command to the controller */ > + spin_lock_irqsave(hba->host->host_lock, flags); > + ufshcd_send_command(hba, tag); > + spin_unlock_irqrestore(hba->host->host_lock, flags); > +out: > + return err; > +} > + > +/** > * ufshcd_memory_alloc - allocate memory for host memory space data structures > * @hba: per adapter instance > * > @@ -644,6 +897,7 @@ static int ufshcd_make_hba_operational(struct ufs_hba *hba) > ufshcd_config_int_aggr(hba, INT_AGGR_CONFIG); > > hba->ufshcd_state = UFSHCD_STATE_OPERATIONAL; > + scsi_scan_host(hba->host); > out: > return err; > } > @@ -743,6 +997,235 @@ static int ufshcd_initialize_hba(struct ufs_hba *hba) > } > > /** > + * ufshcd_slave_alloc - handle initial SCSI device configurations > + * @sdev: pointer to SCSI device > + * > + * Returns success > + */ > +static int ufshcd_slave_alloc(struct scsi_device *sdev) > +{ > + struct ufs_hba *hba; > + > + hba = (struct ufs_hba *)sdev->host->hostdata; > + sdev->tagged_supported = 1; > + > + /* Mode sense(6) is not supported by UFS, so use Mode sense(10) */ > + sdev->use_10_for_ms = 1; > + scsi_set_tag_type(sdev, MSG_SIMPLE_TAG); > + > + /* > + * Inform SCSI Midlayer that the LUN queue depth is same as the > + * controller queue depth. If a LUN queue depth is less than the > + * controller queue depth and if the LUN reports > + * SAM_STAT_TASK_SET_FULL, the LUN queue depth will be adjusted > + * with scsi_adjust_queue_depth. > + */ > + scsi_activate_tcq(sdev, hba->nutrs); > + return 0; > +} > + > +/** > + * ufshcd_slave_destroy - remove SCSI device configurations > + * @sdev: pointer to SCSI device > + */ > +static void ufshcd_slave_destroy(struct scsi_device *sdev) > +{ > + struct ufs_hba *hba; > + > + hba = (struct ufs_hba *)sdev->host->hostdata; > + scsi_deactivate_tcq(sdev, hba->nutrs); > +} > + > +/** > + * ufshcd_adjust_lun_qdepth - Update LUN queue depth if device responds with > + * SAM_STAT_TASK_SET_FULL SCSI command status. > + * @cmd: pointer to SCSI command > + */ > +static void ufshcd_adjust_lun_qdepth(struct scsi_cmnd *cmd) > +{ > + struct ufs_hba *hba; > + int i; > + int lun_qdepth = 0; > + > + hba = (struct ufs_hba *) cmd->device->host->hostdata; > + > + /* > + * LUN queue depth can be obtained by counting outstanding commands > + * on the LUN. > + */ > + for (i = 0; i < hba->nutrs; i++) { > + if (test_bit(i, &hba->outstanding_reqs)) { > + > + /* > + * Check if the outstanding command belongs > + * to the LUN which reported SAM_STAT_TASK_SET_FULL. > + */ > + if (cmd->device->lun == hba->lrb[i].lun) > + lun_qdepth++; > + } > + } > + > + /* > + * LUN queue depth will be total outstanding commands, except the > + * command for which the LUN reported SAM_STAT_TASK_SET_FULL. > + */ > + scsi_adjust_queue_depth(cmd->device, MSG_SIMPLE_TAG, lun_qdepth - 1); > +} > + > +/** > + * ufshcd_scsi_cmd_status - Update SCSI command result based on SCSI status > + * @lrb: pointer to local reference block of completed command > + * @scsi_status: SCSI command status > + * > + * Returns value base on SCSI command status > + */ > +static inline int > +ufshcd_scsi_cmd_status(struct ufshcd_lrb *lrbp, int scsi_status) > +{ > + int result = 0; > + > + switch (scsi_status) { > + case SAM_STAT_GOOD: > + result |= DID_OK << 16 | > + COMMAND_COMPLETE << 8 | > + SAM_STAT_GOOD; > + break; > + case SAM_STAT_CHECK_CONDITION: > + result |= DRIVER_SENSE << 24 | scsi ml will set the driver sense bit for you when it completes the command in scsi_finish_command. No need for the driver to touch this. > + DRIVER_OK << 16 | > + COMMAND_COMPLETE << 8 | > + SAM_STAT_CHECK_CONDITION; > + ufshcd_copy_sense_data(lrbp); > + break; > + case SAM_STAT_BUSY: > + result |= DID_BUS_BUSY << 16 | > + SAM_STAT_BUSY; If you got sam stat busy just set that. You do not need to set the host byte and you do not want to, because the scsi_error.c handling will be incorrect. Instead of retrying until sam stat busy is no longer returned (or until cmd->retries * cmd->timeout) you only get 5 retries. > + break; > + case SAM_STAT_TASK_SET_FULL: > + > + /* > + * If a LUN reports SAM_STAT_TASK_SET_FULL, then the LUN queue > + * depth needs to be adjusted to the exact number of > + * outstanding commands the LUN can handle at any given time. > + */ > + ufshcd_adjust_lun_qdepth(lrbp->cmd); > + result |= DID_SOFT_ERROR << 16 | > + SAM_STAT_TASK_SET_FULL; Same here. Just set the sam stat part. > + break; > + case SAM_STAT_TASK_ABORTED: > + result |= DID_ABORT << 16 | > + ABORT_TASK << 8 | > + SAM_STAT_TASK_ABORTED; Same. > + break; > + default: > + result |= DID_ERROR << 16; > + break; > + } /* end of switch */ > + > + return result; > +} > + > +/** > + * ufshcd_transfer_rsp_status - Get overall status of the response > + * @hba: per adapter instance > + * @lrb: pointer to local reference block of completed command > + * > + * Returns result of the command to notify SCSI midlayer > + */ > +static inline int > +ufshcd_transfer_rsp_status(struct ufs_hba *hba, struct ufshcd_lrb *lrbp) > +{ > + int result = 0; > + int scsi_status; > + int ocs; > + > + /* overall command status of utrd */ > + ocs = ufshcd_get_tr_ocs(lrbp); > + > + switch (ocs) { > + case OCS_SUCCESS: > + > + /* check if the returned transfer response is valid */ > + result = ufshcd_is_valid_req_rsp(lrbp->ucd_rsp_ptr); > + if (result) { > + dev_err(&hba->pdev->dev, > + "Invalid response = %x\n", result); > + break; > + } > + > + /* > + * get the response UPIU result to extract > + * the SCSI command status > + */ > + result = ufshcd_get_rsp_upiu_result(lrbp->ucd_rsp_ptr); > + > + /* > + * get the result based on SCSI status response > + * to notify the SCSI midlayer of the command status > + */ > + scsi_status = result & MASK_SCSI_STATUS; > + result = ufshcd_scsi_cmd_status(lrbp, scsi_status); > + break; > + case OCS_ABORTED: > + result |= DID_ABORT << 16 | ABORT_TASK << 8; > + break; > + case OCS_INVALID_CMD_TABLE_ATTR: > + case OCS_INVALID_PRDT_ATTR: > + case OCS_MISMATCH_DATA_BUF_SIZE: > + case OCS_MISMATCH_RESP_UPIU_SIZE: > + case OCS_PEER_COMM_FAILURE: > + case OCS_FATAL_ERROR: > + default: > + result |= DID_ERROR << 16; > + dev_err(&hba->pdev->dev, > + "OCS error from controller = %x\n", ocs); > + break; > + } /* end of switch */ > + > + return result; > +} > + > +/** > + * ufshcd_transfer_req_compl - handle SCSI and query command completion > + * @hba: per adapter instance > + */ > +static void ufshcd_transfer_req_compl(struct ufs_hba *hba) > +{ > + struct ufshcd_lrb *lrb; > + unsigned long completed_reqs; > + u32 tr_doorbell; > + int result; > + int index; > + > + lrb = hba->lrb; > + tr_doorbell = > + readl(hba->mmio_base + REG_UTP_TRANSFER_REQ_DOOR_BELL); > + completed_reqs = tr_doorbell ^ hba->outstanding_reqs; > + > + for (index = 0; index < hba->nutrs; index++) { > + if (test_bit(index, &completed_reqs)) { > + > + result = ufshcd_transfer_rsp_status(hba, &lrb[index]); > + > + if (lrb[index].cmd) { > + scsi_dma_unmap(lrb[index].cmd); > + lrb[index].cmd->result = result; > + lrb[index].cmd->scsi_done(lrb[index].cmd); > + > + /* Mark completed command as NULL in LRB */ > + lrb[index].cmd = NULL; > + } > + } /* end of if */ > + } /* end of for */ > + > + /* clear corresponding bits of completed commands */ > + hba->outstanding_reqs ^= completed_reqs; > + > + /* Reset interrupt aggregation counters */ > + ufshcd_config_int_aggr(hba, INT_AGGR_RESET); > +} > + > +/** > * ufshcd_uic_cc_handler - handle UIC command completion > * @work: pointer to a work queue structure > * > @@ -773,6 +1256,9 @@ static void ufshcd_sl_intr(struct ufs_hba *hba, u32 intr_status) > { > if (intr_status & UIC_COMMAND_COMPL) > schedule_work(&hba->uic_workq); > + > + if (intr_status & UTP_TRANSFER_REQ_COMPL) > + ufshcd_transfer_req_compl(hba); > } > > /** > @@ -809,7 +1295,13 @@ static struct scsi_host_template ufshcd_driver_template = { > .module = THIS_MODULE, > .name = UFSHCD, > .proc_name = UFSHCD, > + .queuecommand = ufshcd_queuecommand, > + .slave_alloc = ufshcd_slave_alloc, > + .slave_destroy = ufshcd_slave_destroy, > .this_id = -1, > + .sg_tablesize = SG_ALL, > + .cmd_per_lun = UFSHCD_CMD_PER_LUN, > + .can_queue = UFSHCD_CAN_QUEUE, Did you want a change_queue_depth callout? > }; > > /** > @@ -1003,6 +1495,7 @@ ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id) > host->max_lun = UFSHCD_MAX_LUNS; > host->max_channel = UFSHCD_MAX_CHANNEL; > host->unique_id = host->host_no; > + host->max_cmd_len = MAX_CDB_SIZE; > > /* Initialize work queues */ > INIT_WORK(&hba->uic_workq, ufshcd_uic_cc_handler); > @@ -1014,6 +1507,13 @@ ufshcd_probe(struct pci_dev *pdev, const struct pci_device_id *id) > goto out_lrb_free; > } > > + /* Enable SCSI tag mapping */ > + err = scsi_init_shared_tag_map(host, host->can_queue); > + if (err) { > + dev_err(&pdev->dev, "init shared queue failed\n"); > + goto out_free_irq; > + } > + > pci_set_drvdata(pdev, hba); > > err = scsi_add_host(host, &pdev->dev); -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/