Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932099Ab2B0X2b (ORCPT ); Mon, 27 Feb 2012 18:28:31 -0500 Received: from mail1.windriver.com ([147.11.146.13]:58310 "EHLO mail1.windriver.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755882Ab2B0X23 (ORCPT ); Mon, 27 Feb 2012 18:28:29 -0500 Message-ID: <4F4C1194.4080201@windriver.com> Date: Mon, 27 Feb 2012 17:28:20 -0600 From: Jason Wessel User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:8.0) Gecko/20111124 Thunderbird/8.0 MIME-Version: 1.0 To: Andrei Warkentin CC: , , Andrei Warkentin Subject: Re: [PATCH] KDB: Fix usability issues relating to the 'enter' key. References: <608420295.1620292.1330384705791.JavaMail.root@zimbra-prod-mbox-2.vmware.com> In-Reply-To: <608420295.1620292.1330384705791.JavaMail.root@zimbra-prod-mbox-2.vmware.com> X-Enigmail-Version: 1.3.4 Content-Type: text/plain; charset="UTF-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3970 Lines: 71 On 02/27/2012 05:18 PM, Andrei Warkentin wrote: > Hi, > > ----- Original Message ----- >> From: "Jason Wessel" >> To: "Andrei Warkentin" >> Cc: kgdb-bugreport@lists.sourceforge.net, linux-kernel@vger.kernel.org, "Andrei Warkentin" >> Sent: Monday, February 27, 2012 5:50:59 PM >> Subject: Re: [PATCH] KDB: Fix usability issues relating to the 'enter' key. >> >> Did you try the patch I sent? It might not address the key repeat >> problem, but this is some thing I had not yet duplicated. Outside of >> the warning message (which was killed off in the patch), was there >> garbage characters or some notable behavior? Was it something you >> could see in qemu or only in ESX? > Let me elaborate. The cpu_relax() you added solves the hanging. > >> Having authored the keyboard/input handler with some suggestions from >> Dmitry, I was fairly certain it had no way to prevent the leak of the >> up keystroke unless you have the KDB specific capture where it waits >> to act on the "key up" event for an enter keystroke. The cleanup >> handler only cleans up state events where keys were down at the time >> the debug core became active. It will not prevent the leak of key >> strokes or state changes while the kernel was stopped. The goofy >> enter handler was supposed to take care of that. >> >> I conclusively proved there is event leakage from using the original >> patch you provided. Here is the test case, which you should be able >> to >> execute with qemu or kvm (since you also mentioned that was what you >> were previously using). >> >> 1) boot the qemu >> 2) Use kgdboc=kbd >> 3) break into the debugger to the kdb prompt >> 4) type "g" but to not press return >> 5) Connect to the qemu back end debug connection with gdb and set a >> breakpoint at line 402 of atkbd.c which should be the call to: >> input_event(dev, EV_MSC, MSC_RAW, code); >> 6) continue the gdb connection >> 7) In the qemu monitor enter the command: >> sendkey ret 4000 >> >> After 4 seconds when the key is released you will catch the leaked >> event in the atkbd.c, and if you had X running it propagates all the >> way up the input chain. > I know I should have read deeper into the input code. I assumed it performed a reset > on the input device. Assumptions are bad. Sorry. > > So here is the thing. With the patch you sent, you would still leak the break > keypress for the keypad enter. This is because the break code for KP ENTER is 0xe0 0x9c, > and the inb(KBD_DATA_REG) done in the goofy handler will read just the 0xe0 part, leaving > 0x9c behind, which will be leaked out. > > So here is my question - do you want me to fix the existing goofy handler to properly > handle KP ENTER and ENTER repeats? Or do you think it's appropriate to empty out the > FIFO during KDB exit as part of post_exp kgdb_io op? Or reset the input device? Thanks for the explanation. I agree that we still have a leak with the patch I had sent you. The old kdb code simply was incomplete and likely assumed people didn't ever use anything except the main keyboard's enter key. I think the right choice is to correctly handle any that generates enter/return and do not leave the kdb keyboard handler until the release scan code is processed. We have to do this because the physical release delay will always generate another scan code later on regardless of clearing the fifo or resetting the device. The computer is simply faster than the human behind the console in this case. :-) If you have some idea how to correctly fix up the KP ENTER please send a patch, else I will have a look at it sometime soon. It is definitely worth fixing. Cheers, Jason. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/