Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758107Ab2EAPC2 (ORCPT ); Tue, 1 May 2012 11:02:28 -0400 Received: from youngberry.canonical.com ([91.189.89.112]:46184 "EHLO youngberry.canonical.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757918Ab2EAPCZ (ORCPT ); Tue, 1 May 2012 11:02:25 -0400 From: Bryan Wu To: linux@arm.linux.org.uk, rpurdie@rpsys.net, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linus.walleij@linaro.org, akpm@linux-foundation.org, arnd.bergmann@linaro.org, nicolas.pitre@linaro.org, tim.gardner@canonical.com Subject: [PATCH 03/19] ARM: at91: convert old leds drivers to gpio_led and led_trigger drivers Date: Tue, 1 May 2012 23:01:30 +0800 Message-Id: <1335884506-15370-4-git-send-email-bryan.wu@canonical.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1335884506-15370-1-git-send-email-bryan.wu@canonical.com> References: <1335884506-15370-1-git-send-email-bryan.wu@canonical.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 11805 Lines: 439 Build with at91 defconfigs successfully Signed-off-by: Bryan Wu Acked-by: Nicolas Ferre --- arch/arm/mach-at91/board-csb337.c | 2 - arch/arm/mach-at91/board-ecbat91.c | 18 +++++- arch/arm/mach-at91/board-eco920.c | 22 ++++++- arch/arm/mach-at91/board-kafa.c | 17 ++++- arch/arm/mach-at91/board-kb9202.c | 23 ++++++- arch/arm/mach-at91/board-rm9200dk.c | 3 - arch/arm/mach-at91/board-rm9200ek.c | 3 - arch/arm/mach-at91/board-rsi-ews.c | 3 - arch/arm/mach-at91/board-sam9-l9260.c | 23 ++++++- arch/arm/mach-at91/board-sam9261ek.c | 3 - arch/arm/mach-at91/board-yl-9200.c | 3 - arch/arm/mach-at91/include/mach/board.h | 1 - arch/arm/mach-at91/leds.c | 105 ------------------------------- 13 files changed, 89 insertions(+), 137 deletions(-) diff --git a/arch/arm/mach-at91/board-csb337.c b/arch/arm/mach-at91/board-csb337.c index cd81336..4993f1b 100644 --- a/arch/arm/mach-at91/board-csb337.c +++ b/arch/arm/mach-at91/board-csb337.c @@ -219,8 +219,6 @@ static struct gpio_led csb_leds[] = { static void __init csb337_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* Serial */ /* DBGU on ttyS0 */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-ecbat91.c b/arch/arm/mach-at91/board-ecbat91.c index 89cc372..f9a4ab9 100644 --- a/arch/arm/mach-at91/board-ecbat91.c +++ b/arch/arm/mach-at91/board-ecbat91.c @@ -137,11 +137,20 @@ static struct spi_board_info __initdata ecb_at91spi_devices[] = { }, }; +/* + * LEDs + */ +static struct gpio_led ecb_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PC7, + .active_low = 1, + .default_trigger = "heartbeat", + } +}; + static void __init ecb_at91board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PC7, AT91_PIN_PC7); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -164,6 +173,9 @@ static void __init ecb_at91board_init(void) /* SPI */ at91_add_device_spi(ecb_at91spi_devices, ARRAY_SIZE(ecb_at91spi_devices)); + + /* LEDs */ + at91_gpio_leds(ecb_leds, ARRAY_SIZE(ecb_leds)); } MACHINE_START(ECBAT91, "emQbit's ECB_AT91") diff --git a/arch/arm/mach-at91/board-eco920.c b/arch/arm/mach-at91/board-eco920.c index 558546c..f9a9d28 100644 --- a/arch/arm/mach-at91/board-eco920.c +++ b/arch/arm/mach-at91/board-eco920.c @@ -92,10 +92,26 @@ static struct spi_board_info eco920_spi_devices[] = { }, }; +/* + * LEDs + */ +static struct gpio_led eco920_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PB0, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PB1, + .active_low = 1, + .default_trigger = "timer", + } +}; + static void __init eco920_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); /* DBGU on ttyS0. (Rx & Tx only */ at91_register_uart(0, 0, 0); at91_add_device_serial(); @@ -126,6 +142,8 @@ static void __init eco920_board_init(void) ); at91_add_device_spi(eco920_spi_devices, ARRAY_SIZE(eco920_spi_devices)); + /* LEDs */ + at91_gpio_leds(eco920_leds, ARRAY_SIZE(eco920_leds)); } MACHINE_START(ECO920, "eco920") diff --git a/arch/arm/mach-at91/board-kafa.c b/arch/arm/mach-at91/board-kafa.c index f260657..8db11f4 100644 --- a/arch/arm/mach-at91/board-kafa.c +++ b/arch/arm/mach-at91/board-kafa.c @@ -65,11 +65,20 @@ static struct at91_udc_data __initdata kafa_udc_data = { .pullup_pin = AT91_PIN_PB7, }; +/* + * LEDs + */ +static struct gpio_led kafa_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PB4, + .active_low = 1, + .default_trigger = "heartbeat", + }, +}; + static void __init kafa_board_init(void) { - /* Set up the LEDs */ - at91_init_leds(AT91_PIN_PB4, AT91_PIN_PB4); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -87,6 +96,8 @@ static void __init kafa_board_init(void) at91_add_device_i2c(NULL, 0); /* SPI */ at91_add_device_spi(NULL, 0); + /* LEDs */ + at91_gpio_leds(kafa_leds, ARRAY_SIZE(kafa_leds)); } MACHINE_START(KAFA, "Sperry-Sun KAFA") diff --git a/arch/arm/mach-at91/board-kb9202.c b/arch/arm/mach-at91/board-kb9202.c index ba39db5..4e362b8 100644 --- a/arch/arm/mach-at91/board-kb9202.c +++ b/arch/arm/mach-at91/board-kb9202.c @@ -95,11 +95,26 @@ static struct atmel_nand_data __initdata kb9202_nand_data = { .num_parts = ARRAY_SIZE(kb9202_nand_partition), }; +/* + * LEDs + */ +static struct gpio_led kb9202_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PC19, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PC18, + .active_low = 1, + .default_trigger = "timer", + } +}; + static void __init kb9202_board_init(void) { - /* Set up the LEDs */ - at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -127,6 +142,8 @@ static void __init kb9202_board_init(void) at91_add_device_spi(NULL, 0); /* NAND */ at91_add_device_nand(&kb9202_nand_data); + /* LEDs */ + at91_gpio_leds(kb9202_leds, ARRAY_SIZE(kb9202_leds)); } MACHINE_START(KB9200, "KB920x") diff --git a/arch/arm/mach-at91/board-rm9200dk.c b/arch/arm/mach-at91/board-rm9200dk.c index afd7a47..7417b7c 100644 --- a/arch/arm/mach-at91/board-rm9200dk.c +++ b/arch/arm/mach-at91/board-rm9200dk.c @@ -176,9 +176,6 @@ static struct gpio_led dk_leds[] = { static void __init dk_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-rm9200ek.c b/arch/arm/mach-at91/board-rm9200ek.c index 2b15b8a..18b2ec0 100644 --- a/arch/arm/mach-at91/board-rm9200ek.c +++ b/arch/arm/mach-at91/board-rm9200ek.c @@ -147,9 +147,6 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-rsi-ews.c b/arch/arm/mach-at91/board-rsi-ews.c index 24ab9be..32342b8 100644 --- a/arch/arm/mach-at91/board-rsi-ews.c +++ b/arch/arm/mach-at91/board-rsi-ews.c @@ -184,9 +184,6 @@ static struct platform_device rsiews_nor_flash = { */ static void __init rsi_ews_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PB6, AT91_PIN_PB9); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ /* This one is for debugging */ diff --git a/arch/arm/mach-at91/board-sam9-l9260.c b/arch/arm/mach-at91/board-sam9-l9260.c index cdd21f2..ef982f8 100644 --- a/arch/arm/mach-at91/board-sam9-l9260.c +++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -165,11 +165,26 @@ static struct at91_mmc_data __initdata ek_mmc_data = { .vcc_pin = -EINVAL, }; +/* + * LEDs + */ +static struct gpio_led ek_leds[] = { + { /* D1 */ + .name = "led1", + .gpio = AT91_PIN_PA9, + .active_low = 1, + .default_trigger = "heartbeat", + }, + { /* D2 */ + .name = "led2", + .gpio = AT91_PIN_PA6, + .active_low = 1, + .default_trigger = "timer", + } +}; + static void __init ek_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PA9, AT91_PIN_PA6); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); @@ -196,6 +211,8 @@ static void __init ek_board_init(void) at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ at91_add_device_i2c(NULL, 0); + /* LEDs */ + at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); } MACHINE_START(SAM9_L9260, "Olimex SAM9-L9260") diff --git a/arch/arm/mach-at91/board-sam9261ek.c b/arch/arm/mach-at91/board-sam9261ek.c index 2736453..0b4501c 100644 --- a/arch/arm/mach-at91/board-sam9261ek.c +++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -568,9 +568,6 @@ static struct gpio_led ek_leds[] = { static void __init ek_board_init(void) { - /* Setup the LEDs */ - at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/board-yl-9200.c b/arch/arm/mach-at91/board-yl-9200.c index d56665e..cc05dd1 100644 --- a/arch/arm/mach-at91/board-yl-9200.c +++ b/arch/arm/mach-at91/board-yl-9200.c @@ -540,9 +540,6 @@ void __init yl9200_add_device_video(void) {} static void __init yl9200_board_init(void) { - /* Setup the LEDs D2=PB17 (timer), D3=PB16 (cpu) */ - at91_init_leds(AT91_PIN_PB16, AT91_PIN_PB17); - /* Serial */ /* DBGU on ttyS0. (Rx & Tx only) */ at91_register_uart(0, 0, 0); diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 369afc2..c55a436 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -187,7 +187,6 @@ struct at91_can_data { extern void __init at91_add_device_can(struct at91_can_data *data); /* LEDs */ -extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); extern void __init at91_pwm_leds(struct gpio_led *leds, int nr); diff --git a/arch/arm/mach-at91/leds.c b/arch/arm/mach-at91/leds.c index 8dfafe7..1b1e62b 100644 --- a/arch/arm/mach-at91/leds.c +++ b/arch/arm/mach-at91/leds.c @@ -90,108 +90,3 @@ void __init at91_pwm_leds(struct gpio_led *leds, int nr) #else void __init at91_pwm_leds(struct gpio_led *leds, int nr){} #endif - - -/* ------------------------------------------------------------------------- */ - -#if defined(CONFIG_LEDS) - -#include - -/* - * Old ARM-specific LED framework; not fully functional when generic time is - * in use. - */ - -static u8 at91_leds_cpu; -static u8 at91_leds_timer; - -static inline void at91_led_on(unsigned int led) -{ - at91_set_gpio_value(led, 0); -} - -static inline void at91_led_off(unsigned int led) -{ - at91_set_gpio_value(led, 1); -} - -static inline void at91_led_toggle(unsigned int led) -{ - unsigned long is_off = at91_get_gpio_value(led); - if (is_off) - at91_led_on(led); - else - at91_led_off(led); -} - - -/* - * Handle LED events. - */ -static void at91_leds_event(led_event_t evt) -{ - unsigned long flags; - - local_irq_save(flags); - - switch(evt) { - case led_start: /* System startup */ - at91_led_on(at91_leds_cpu); - break; - - case led_stop: /* System stop / suspend */ - at91_led_off(at91_leds_cpu); - break; - -#ifdef CONFIG_LEDS_TIMER - case led_timer: /* Every 50 timer ticks */ - at91_led_toggle(at91_leds_timer); - break; -#endif - -#ifdef CONFIG_LEDS_CPU - case led_idle_start: /* Entering idle state */ - at91_led_off(at91_leds_cpu); - break; - - case led_idle_end: /* Exit idle state */ - at91_led_on(at91_leds_cpu); - break; -#endif - - default: - break; - } - - local_irq_restore(flags); -} - - -static int __init leds_init(void) -{ - if (!at91_leds_timer || !at91_leds_cpu) - return -ENODEV; - - leds_event = at91_leds_event; - - leds_event(led_start); - return 0; -} - -__initcall(leds_init); - - -void __init at91_init_leds(u8 cpu_led, u8 timer_led) -{ - /* Enable GPIO to access the LEDs */ - at91_set_gpio_output(cpu_led, 1); - at91_set_gpio_output(timer_led, 1); - - at91_leds_cpu = cpu_led; - at91_leds_timer = timer_led; -} - -#else -void __init at91_init_leds(u8 cpu_led, u8 timer_led) {} -#endif -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/