Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752492Ab2EBGz4 (ORCPT ); Wed, 2 May 2012 02:55:56 -0400 Received: from mail-yx0-f174.google.com ([209.85.213.174]:54371 "EHLO mail-yx0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751185Ab2EBGzy (ORCPT ); Wed, 2 May 2012 02:55:54 -0400 MIME-Version: 1.0 In-Reply-To: <1335935266-25289-4-git-send-email-thomas.abraham@linaro.org> References: <1335935266-25289-1-git-send-email-thomas.abraham@linaro.org> <1335935266-25289-4-git-send-email-thomas.abraham@linaro.org> Date: Wed, 2 May 2012 15:55:52 +0900 X-Google-Sender-Auth: zwUlIHEsoU-XBZ9692DUWBxagGc Message-ID: Subject: Re: [PATCH 3/7] mmc: dw_mmc: add device tree support From: Kyungmin Park To: Thomas Abraham Cc: linux-mmc@vger.kernel.org, devicetree-discuss@lists.ozlabs.org, linux-samsung-soc@vger.kernel.org, patches@linaro.org, linux-kernel@vger.kernel.org, rob.herring@calxeda.com, grant.likely@secretlab.ca, kgene.kim@samsung.com, cjb@laptop.org, linux-arm-kernel@lists.infradead.org Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 15595 Lines: 502 Hi, On 5/2/12, Thomas Abraham wrote: > Add device tree based discovery support. > > Signed-off-by: Thomas Abraham > --- > .../devicetree/bindings/mmc/synposis-dw-mshc.txt | 85 +++++++++ > drivers/mmc/host/dw_mmc-pltfm.c | 24 +++ > drivers/mmc/host/dw_mmc.c | 181 > +++++++++++++++++++- > drivers/mmc/host/dw_mmc.h | 10 + > include/linux/mmc/dw_mmc.h | 2 + > 5 files changed, 296 insertions(+), 6 deletions(-) > create mode 100644 > Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt > > diff --git a/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt > b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt > new file mode 100644 > index 0000000..c1ed70e > --- /dev/null > +++ b/Documentation/devicetree/bindings/mmc/synposis-dw-mshc.txt > @@ -0,0 +1,85 @@ > +* Synopsis Designware Mobile Storage Host Controller > + > +The Synopsis designware mobile storage host controller is used to > interface > +a SoC with storage medium such as eMMC or SD/MMC cards. > + > +Required Properties: > + > +* compatible: should be one of the following > + - synopsis,dw-mshc: for controllers compliant with synopsis dw-mshc. I googled the "Synopsis Designware Mobile Storage Host Controller" and Synopsis released it as this name. but still I like the 'dw-mmc' instead of'dw-mshc'. > + > +* reg: physical base address of the dw-mshc controller and size of its > memory > + region. > + > +* interrupts: interrupt specifier for the controller. The format and value > of > + the interrupt specifier depends on the interrupt parent for the > controller. > + > +# Slots: The slot specific information are contained within child-nodes > with > + each child-node representing a supported slot. There should be atleast > one > + child node representing a card slot. The name of the slot child node > should > + be 'slot{n}' where n is the unique number of the slot connnected to the > + controller. The following are optional properties which can be included > in > + the slot child node. > + > + * bus-width: specifies the width of the data bus connected from the > + controller to the card slot. The value should be 1, 4 or 8. In case > + this property is not specified, a default value of 1 is assumed for > + this property. > + > + * cd-gpios: specifies the card detect gpio line. The format of the > + gpio specifier depends on the gpio controller. > + > + * wp-gpios: specifies the write protect gpio line. The format of the > + gpio specifier depends on the gpio controller. > + > + * gpios: specifies a list of gpios used for command, clock and data > + bus. The first gpio is the command line and the second gpio is the > + clock line. The rest of the gpios (depending on the bus-width > + property) are the data lines in no particular order. The format of > + the gpio specifier depends on the gpio controller. > + > +Optional properties: > + > +* fifo-depth: The maximum size of the tx/rx fifo's. If this property is > not > + specified, the default value of the fifo size is determined from the > + controller registers. > + > +* card-detect-delay: Delay in milli-seconds before detecting card after > card > + insert event. The default value is 0. > + > +* supports-highspeed: Enables support for high speed cards (upto 50MHz) > + > +* card-detection-broken: The card detection functionality is not available > on > + any of the slots. > + > +* no-write-protect: The write protect pad of the controller is not > connected > + to the write protect pin on the slot. > + > +Example: > + > + The MSHC controller node can be split into two portions, SoC specific > and > + board specific portions as listed below. > + > + dwmmc0@12200000 { > + compatible = "synopsis,dw-mshc"; > + reg = <0x12200000 0x1000>; > + interrupts = <0 75 0>; > + }; > + > + dwmmc0@12200000 { > + supports-highspeed; > + card-detection-broken; > + no-write-protect; > + fifo-depth = <0x80>; > + card-detect-delay = <200>; > + > + slot0 { > + bus-width = <8>; > + cd-gpios = <&gpc0 2 2 3 3>; > + gpios = <&gpc0 0 2 0 3>, <&gpc0 1 2 0 3>, > + <&gpc1 0 2 3 3>, <&gpc1 1 2 3 3>, > + <&gpc1 2 2 3 3>, <&gpc1 3 2 3 3>, > + <&gpc0 3 2 3 3>, <&gpc0 4 2 3 3>, > + <&gpc0 5 2 3 3>, <&gpc0 6 2 3 3>; > + }; > + }; > diff --git a/drivers/mmc/host/dw_mmc-pltfm.c > b/drivers/mmc/host/dw_mmc-pltfm.c > index 92ec3eb..2b2c9bd 100644 > --- a/drivers/mmc/host/dw_mmc-pltfm.c > +++ b/drivers/mmc/host/dw_mmc-pltfm.c > @@ -19,8 +19,24 @@ > #include > #include > #include > +#include > #include "dw_mmc.h" > > +#ifdef CONFIG_OF > +static struct dw_mci_drv_data synopsis_drv_data = { > + .ctrl_type = DW_MCI_TYPE_SYNOPSIS, > +}; > + > +static const struct of_device_id dw_mci_pltfm_match[] = { > + { .compatible = "synopsis,dw-mshc", > + .data = (void *)&synopsis_drv_data, }, > + {}, > +}; > +MODULE_DEVICE_TABLE(of, dw_mci_pltfm_match); > +#else > +static const struct of_device_id dw_mci_pltfm_match[]; > +#endif > + > static int dw_mci_pltfm_probe(struct platform_device *pdev) > { > struct dw_mci *host; > @@ -51,6 +67,13 @@ static int dw_mci_pltfm_probe(struct platform_device > *pdev) > if (!host->regs) > goto err_free; > platform_set_drvdata(pdev, host); > + > + if (pdev->dev.of_node) { > + const struct of_device_id *match; > + match = of_match_node(dw_mci_pltfm_match, pdev->dev.of_node); > + host->drv_data = match->data; > + } > + > ret = dw_mci_probe(host); > if (ret) > goto err_out; > @@ -111,6 +134,7 @@ static struct platform_driver dw_mci_pltfm_driver = { > .remove = __exit_p(dw_mci_pltfm_remove), > .driver = { > .name = "dw_mmc", > + .of_match_table = of_match_ptr(dw_mci_pltfm_match), > .pm = &dw_mci_pltfm_pmops, > }, > }; > diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c > index 38cb7f8..bcf66d7 100644 > --- a/drivers/mmc/host/dw_mmc.c > +++ b/drivers/mmc/host/dw_mmc.c > @@ -33,9 +33,13 @@ > #include > #include > #include > +#include > +#include > > #include "dw_mmc.h" > > +#define NUM_PINS(x) (x + 2) > + > /* Common flag combinations */ > #define DW_MCI_DATA_ERROR_FLAGS (SDMMC_INT_DTO | SDMMC_INT_DCRC | \ > SDMMC_INT_HTO | SDMMC_INT_SBE | \ > @@ -86,6 +90,8 @@ struct idmac_desc { > struct dw_mci_slot { > struct mmc_host *mmc; > struct dw_mci *host; > + int wp_gpio; > + int cd_gpio; > > u32 ctype; > > @@ -816,6 +822,8 @@ static int dw_mci_get_ro(struct mmc_host *mmc) > read_only = 0; > else if (brd->get_ro) > read_only = brd->get_ro(slot->id); > + else if (gpio_is_valid(slot->wp_gpio)) > + read_only = gpio_get_value(slot->wp_gpio); > else > read_only = > mci_readl(slot->host, WRTPRT) & (1 << slot->id) ? 1 : 0; > @@ -837,6 +845,8 @@ static int dw_mci_get_cd(struct mmc_host *mmc) > present = 1; > else if (brd->get_cd) > present = !brd->get_cd(slot->id); > + else if (gpio_is_valid(slot->cd_gpio)) > + present = gpio_get_value(slot->cd_gpio); > else > present = (mci_readl(slot->host, CDETECT) & (1 << slot->id)) > == 0 ? 1 : 0; > @@ -1747,6 +1757,96 @@ static void dw_mci_work_routine_card(struct > work_struct *work) > } > } > > +#ifdef CONFIG_OF > +static struct device_node *dw_mci_of_find_slot_node(struct device *dev, u8 > slot) > +{ > + struct device_node *np; > + char name[7]; > + > + if (!dev || !dev->of_node) > + return NULL; > + > + for_each_child_of_node(dev->of_node, np) { > + sprintf(name, "slot%d", slot); > + if (!strcmp(name, np->name)) > + return np; > + } > + return NULL; > +} > + > +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) > +{ > + struct device_node *np = dw_mci_of_find_slot_node(dev, slot); > + u32 bus_wd = 1; > + > + if (!np) > + return 1; > + > + if (of_property_read_u32(np, "bus-width", &bus_wd)) > + dev_err(dev, "bus-width property not found, assuming width" > + " as 1\n"); > + return bus_wd; > +} > + > +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) > +{ > + struct device_node *np = dw_mci_of_find_slot_node(&host->dev, slot); > + int idx, gpio, ret; > + > + for (idx = 0; idx < NUM_PINS(bus_wd); idx++) { > + gpio = of_get_gpio(np, idx); > + if (!gpio_is_valid(gpio)) { > + dev_err(&host->dev, "invalid gpio: %d\n", gpio); > + return -EINVAL; > + } > + > + ret = devm_gpio_request(&host->dev, gpio, "dw-mci-bus"); > + if (ret) { > + dev_err(&host->dev, "gpio [%d] request failed\n", gpio); > + return -EBUSY; > + } > + } > + > + host->slot[slot]->wp_gpio = -1; > + gpio = of_get_named_gpio(np, "wp_gpios", 0); > + if (!gpio_is_valid(gpio)) { > + dev_info(&host->dev, "wp gpio not available"); > + } else { > + ret = devm_gpio_request(&host->dev, gpio, "dw-mci-wp"); > + if (ret) > + dev_info(&host->dev, "gpio [%d] request failed\n", > + gpio); > + else > + host->slot[slot]->wp_gpio = gpio; > + } > + > + host->slot[slot]->cd_gpio = -1; > + gpio = of_get_named_gpio(np, "cd-gpios", 0); > + if (!gpio_is_valid(gpio)) { > + dev_info(&host->dev, "cd gpio not available"); > + } else { > + ret = devm_gpio_request(&host->dev, gpio, "dw-mci-cd"); > + if (ret) > + dev_err(&host->dev, "gpio [%d] request failed\n", gpio); > + else > + host->slot[slot]->cd_gpio = gpio; > + } > + > + return 0; > +} > + > +#else /* CONFIG_OF */ > +static u32 dw_mci_of_get_bus_wd(struct device *dev, u8 slot) > +{ > + return 1; > +} > + > +static int dw_mci_of_setup_bus(struct dw_mci *host, u8 slot, u32 bus_wd) > +{ > + return -EINVAL; > +} > +#endif /* CONFIG_OF */ > + > static int __init dw_mci_init_slot(struct dw_mci *host, unsigned int id) > { > struct mmc_host *mmc; > @@ -1760,6 +1860,7 @@ static int __init dw_mci_init_slot(struct dw_mci > *host, unsigned int id) > slot->id = id; > slot->mmc = mmc; > slot->host = host; > + host->slot[id] = slot; > > mmc->ops = &dw_mci_ops; > mmc->f_min = DIV_ROUND_UP(host->bus_hz, 510); > @@ -1780,12 +1881,21 @@ static int __init dw_mci_init_slot(struct dw_mci > *host, unsigned int id) > if (host->pdata->caps) > mmc->caps = host->pdata->caps; > > + mmc->caps |= host->drv_data->caps; > + > if (host->pdata->caps2) > mmc->caps2 = host->pdata->caps2; > > - if (host->pdata->get_bus_wd) > + if (host->pdata->get_bus_wd) { > if (host->pdata->get_bus_wd(slot->id) >= 4) > mmc->caps |= MMC_CAP_4_BIT_DATA; > + } else if (host->dev.of_node) { > + unsigned int bus_width; > + bus_width = dw_mci_of_get_bus_wd(&host->dev, slot->id); > + if (bus_width >= 4) > + mmc->caps |= MMC_CAP_4_BIT_DATA; In case of bus_width has 8; then how to handle it? maybe it's missing one. > + dw_mci_of_setup_bus(host, slot->id, bus_width); > + } > > if (host->pdata->quirks & DW_MCI_QUIRK_HIGHSPEED) > mmc->caps |= MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; > @@ -1830,7 +1940,6 @@ static int __init dw_mci_init_slot(struct dw_mci > *host, unsigned int id) > else > clear_bit(DW_MMC_CARD_PRESENT, &slot->flags); > > - host->slot[id] = slot; > mmc_add_host(mmc); > > #if defined(CONFIG_DEBUG_FS) > @@ -1923,15 +2032,75 @@ static bool mci_wait_reset(struct device *dev, > struct dw_mci *host) > return false; > } > > +#ifdef CONFIG_OF > +static struct dw_mci_of_quirks { > + char *quirk; > + int id; > +} of_quriks[] = { > + { > + .quirk = "supports-highspeed", > + .id = DW_MCI_QUIRK_HIGHSPEED, > + }, { > + .quirk = "card-detection-broken", > + .id = DW_MCI_QUIRK_BROKEN_CARD_DETECTION, > + }, { > + .quirk = "no-write-protect", > + .id = DW_MCI_QUIRK_NO_WRITE_PROTECT, > + }, > + { } > +}; > + > +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) > +{ > + struct dw_mci_board *pdata; > + struct device *dev = &host->dev; > + struct device_node *np = dev->of_node, *slot; > + u32 timing[3]; > + int idx, cnt; > + > + pdata = devm_kzalloc(dev, sizeof(*pdata), GFP_KERNEL); > + if (!pdata) { > + dev_err(dev, "could not allocate memory for pdata\n"); > + return ERR_PTR(-ENOMEM); > + } > + > + /* find out number of slots supported */ > + for_each_child_of_node(np, slot) > + pdata->num_slots++; > + > + /* get quirks */ > + cnt = sizeof(of_quriks) / sizeof(struct dw_mci_of_quirks); > + for (idx = 0; idx < cnt; idx++) > + if (of_get_property(np, of_quriks[idx].quirk, NULL)) > + pdata->quirks |= of_quriks[idx].id; > + > + if (of_property_read_u32(np, "fifo-depth", &pdata->fifo_depth)) > + dev_info(dev, "fifo-depth property not found, using " > + "value of FIFOTH register as default\n"); > + > + of_property_read_u32(np, "card-detect-delay", &pdata->detect_delay_ms); > + > + return pdata; > +} > + > +#else /* CONFIG_OF */ > +static struct dw_mci_board *dw_mci_parse_dt(struct dw_mci *host) > +{ > + return ERR_PTR(-EINVAL); > +} > +#endif /* CONFIG_OF */ > + > int dw_mci_probe(struct dw_mci *host) > { > int width, i, ret = 0; > u32 fifo_size; > > - if (!host->pdata || !host->pdata->init) { > - dev_err(&host->dev, > - "Platform data must supply init function\n"); > - return -ENODEV; > + if (!host->pdata) { > + host->pdata = dw_mci_parse_dt(host); > + if (IS_ERR(host->pdata)) { > + dev_err(&host->dev, "platform data not available\n"); > + return -EINVAL; > + } > } > > if (!host->pdata->select_slot && host->pdata->num_slots > 1) { > diff --git a/drivers/mmc/host/dw_mmc.h b/drivers/mmc/host/dw_mmc.h > index 15c27e1..8b8862b 100644 > --- a/drivers/mmc/host/dw_mmc.h > +++ b/drivers/mmc/host/dw_mmc.h > @@ -182,4 +182,14 @@ extern int dw_mci_suspend(struct dw_mci *host); > extern int dw_mci_resume(struct dw_mci *host); > #endif > > +/* Variations in the dw_mci controller */ > +#define DW_MCI_TYPE_SYNOPSIS 0 > +#define DW_MCI_TYPE_EXYNOS5250 1 /* Samsung Exynos5250 Extensions */ Um. it's not good idea to add specific SOC version. And as you know, exynos4 series has this controller. > + > +/* dw_mci platform driver data */ > +struct dw_mci_drv_data { > + unsigned long ctrl_type; > + unsigned long caps; > +}; > + > #endif /* _DW_MMC_H_ */ > diff --git a/include/linux/mmc/dw_mmc.h b/include/linux/mmc/dw_mmc.h > index fb51a5f..71d2b56 100644 > --- a/include/linux/mmc/dw_mmc.h > +++ b/include/linux/mmc/dw_mmc.h > @@ -78,6 +78,7 @@ struct mmc_data; > * @data_offset: Set the offset of DATA register according to VERID. > * @dev: Device associated with the MMC controller. > * @pdata: Platform data associated with the MMC controller. > + * @drv_data: Driver specific data for identified variant of the > controller > * @biu_clk: Pointer to bus interface unit clock instance. > * @ciu_clk: Pointer to card interface unit clock instance. > * @slot: Slots sharing this MMC controller. > @@ -160,6 +161,7 @@ struct dw_mci { > u16 data_offset; > struct device dev; > struct dw_mci_board *pdata; > + struct dw_mci_drv_data *drv_data; > struct clk *biu_clk; > struct clk *ciu_clk; > struct dw_mci_slot *slot[MAX_MCI_SLOTS]; > -- > 1.7.5.4 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel > -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/