Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754601Ab2EHEJt (ORCPT ); Tue, 8 May 2012 00:09:49 -0400 Received: from eu1sys200aog113.obsmtp.com ([207.126.144.135]:43495 "EHLO eu1sys200aog113.obsmtp.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751146Ab2EHEJn (ORCPT ); Tue, 8 May 2012 00:09:43 -0400 From: Viresh Kumar To: Cc: , , , , , , , , , , , Viresh Kumar , Giuseppe Cavallaro , "David S. Miller" , Subject: [PATCH V3 Resend 09/12] net/stmmac: Remove conditional compilation of clk code Date: Tue, 8 May 2012 09:22:36 +0530 Message-ID: <8e66b900fe5ee10c8db93d2f12c912e3dfb0708f.1336448639.git.viresh.kumar@st.com> X-Mailer: git-send-email 1.7.9 In-Reply-To: References: MIME-Version: 1.0 Content-Type: text/plain Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5601 Lines: 197 With addition of dummy clk_*() calls for non CONFIG_HAVE_CLK cases in clk.h, there is no need to have clk code enclosed in #ifdef CONFIG_HAVE_CLK, #endif macros. This also fixes error paths of probe(), as a goto is required in this patch. Signed-off-by: Viresh Kumar Cc: Giuseppe Cavallaro Cc: David S. Miller Cc: netdev@vger.kernel.org --- drivers/net/ethernet/stmicro/stmmac/stmmac.h | 41 --------------------- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 33 +++++++++-------- 2 files changed, 17 insertions(+), 57 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac.h b/drivers/net/ethernet/stmicro/stmmac/stmmac.h index db2de9a..7f85895 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac.h +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac.h @@ -81,9 +81,7 @@ struct stmmac_priv { struct stmmac_counters mmc; struct dma_features dma_cap; int hw_cap_support; -#ifdef CONFIG_HAVE_CLK struct clk *stmmac_clk; -#endif int clk_csr; }; @@ -103,42 +101,3 @@ int stmmac_dvr_remove(struct net_device *ndev); struct stmmac_priv *stmmac_dvr_probe(struct device *device, struct plat_stmmacenet_data *plat_dat, void __iomem *addr); - -#ifdef CONFIG_HAVE_CLK -static inline int stmmac_clk_enable(struct stmmac_priv *priv) -{ - if (!IS_ERR(priv->stmmac_clk)) - return clk_enable(priv->stmmac_clk); - - return 0; -} - -static inline void stmmac_clk_disable(struct stmmac_priv *priv) -{ - if (IS_ERR(priv->stmmac_clk)) - return; - - clk_disable(priv->stmmac_clk); -} -static inline int stmmac_clk_get(struct stmmac_priv *priv) -{ - priv->stmmac_clk = clk_get(priv->device, NULL); - - if (IS_ERR(priv->stmmac_clk)) - return PTR_ERR(priv->stmmac_clk); - - return 0; -} -#else -static inline int stmmac_clk_enable(struct stmmac_priv *priv) -{ - return 0; -} -static inline void stmmac_clk_disable(struct stmmac_priv *priv) -{ -} -static inline int stmmac_clk_get(struct stmmac_priv *priv) -{ - return 0; -} -#endif /* CONFIG_HAVE_CLK */ diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 1a4cf81..bbdcb55 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -28,6 +28,7 @@ https://bugzilla.stlinux.com/ *******************************************************************************/ +#include #include #include #include @@ -165,12 +166,8 @@ static void stmmac_verify_args(void) static void stmmac_clk_csr_set(struct stmmac_priv *priv) { -#ifdef CONFIG_HAVE_CLK u32 clk_rate; - if (IS_ERR(priv->stmmac_clk)) - return; - clk_rate = clk_get_rate(priv->stmmac_clk); /* Platform provided default clk_csr would be assumed valid @@ -192,7 +189,6 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv) * we can not estimate the proper divider as it is not known * the frequency of clk_csr_i. So we do not change the default * divider. */ -#endif } #if defined(STMMAC_XMIT_DEBUG) || defined(STMMAC_RX_DEBUG) @@ -971,7 +967,7 @@ static int stmmac_open(struct net_device *dev) } else priv->tm->enable = 1; #endif - stmmac_clk_enable(priv); + clk_enable(priv->stmmac_clk); stmmac_check_ether_addr(priv); @@ -1075,7 +1071,7 @@ open_error: if (priv->phydev) phy_disconnect(priv->phydev); - stmmac_clk_disable(priv); + clk_disable(priv->stmmac_clk); return ret; } @@ -1128,7 +1124,7 @@ static int stmmac_release(struct net_device *dev) #ifdef CONFIG_STMMAC_DEBUG_FS stmmac_exit_fs(); #endif - stmmac_clk_disable(priv); + clk_disable(priv->stmmac_clk); return 0; } @@ -1922,11 +1918,14 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, ret = register_netdev(ndev); if (ret) { pr_err("%s: ERROR %i registering the device\n", __func__, ret); - goto error; + goto error_netdev_register; } - if (stmmac_clk_get(priv)) + priv->stmmac_clk = clk_get(priv->device, NULL); + if (IS_ERR(priv->stmmac_clk)) { pr_warning("%s: warning: cannot get CSR clock\n", __func__); + goto error_clk_get; + } /* If a specific clk_csr value is passed from the platform * this means that the CSR Clock Range selection cannot be @@ -1944,15 +1943,17 @@ struct stmmac_priv *stmmac_dvr_probe(struct device *device, if (ret < 0) { pr_debug("%s: MDIO bus (id: %d) registration failed", __func__, priv->plat->bus_id); - goto error; + goto error_mdio_register; } return priv; -error: - netif_napi_del(&priv->napi); - +error_mdio_register: + clk_put(priv->stmmac_clk); +error_clk_get: unregister_netdev(ndev); +error_netdev_register: + netif_napi_del(&priv->napi); free_netdev(ndev); return NULL; @@ -2020,7 +2021,7 @@ int stmmac_suspend(struct net_device *ndev) else { stmmac_set_mac(priv->ioaddr, false); /* Disable clock in case of PWM is off */ - stmmac_clk_disable(priv); + clk_disable(priv->stmmac_clk); } spin_unlock(&priv->lock); return 0; @@ -2044,7 +2045,7 @@ int stmmac_resume(struct net_device *ndev) priv->hw->mac->pmt(priv->ioaddr, 0); else /* enable the clk prevously disabled */ - stmmac_clk_enable(priv); + clk_enable(priv->stmmac_clk); netif_device_attach(ndev); -- 1.7.9 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/