Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757680Ab2EHHVL (ORCPT ); Tue, 8 May 2012 03:21:11 -0400 Received: from smtp3-g21.free.fr ([212.27.42.3]:57749 "EHLO smtp3-g21.free.fr" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757548Ab2EHHVF (ORCPT ); Tue, 8 May 2012 03:21:05 -0400 From: =?UTF-8?q?Eric=20B=C3=A9nard?= To: Sascha Hauer Cc: linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, =?UTF-8?q?Eric=20B=C3=A9nard?= Subject: [PATCH 05/12] ARM: imx: eukrea-cpuimx51: remove board Date: Tue, 8 May 2012 09:20:20 +0200 Message-Id: <1336461627-30315-5-git-send-email-eric@eukrea.com> X-Mailer: git-send-email 1.7.7.6 In-Reply-To: <1336461627-30315-1-git-send-email-eric@eukrea.com> References: <1336461627-30315-1-git-send-email-eric@eukrea.com> MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17078 Lines: 594 this board is not publicly available and is replaced by cpuimx51sd Signed-off-by: Eric Bénard Cc: Sascha Hauer --- arch/arm/mach-imx/Kconfig | 30 --- arch/arm/mach-imx/Makefile | 2 - arch/arm/mach-imx/eukrea_mbimx51-baseboard.c | 206 ------------------ arch/arm/mach-imx/mach-cpuimx51.c | 301 -------------------------- 4 files changed, 0 insertions(+), 539 deletions(-) delete mode 100644 arch/arm/mach-imx/eukrea_mbimx51-baseboard.c delete mode 100644 arch/arm/mach-imx/mach-cpuimx51.c diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 28d89d3..2f824d8 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -685,36 +685,6 @@ config MACH_MX51_3DS Include support for MX51PDK (3DS) platform. This includes specific configurations for the board and its peripherals. -config MACH_EUKREA_CPUIMX51 - bool "Support Eukrea CPUIMX51 module" - select SOC_IMX51 - select IMX_HAVE_PLATFORM_FSL_USB2_UDC - select IMX_HAVE_PLATFORM_IMX_I2C - select IMX_HAVE_PLATFORM_IMX_UART - select IMX_HAVE_PLATFORM_MXC_EHCI - select IMX_HAVE_PLATFORM_MXC_NAND - select IMX_HAVE_PLATFORM_SPI_IMX - help - Include support for Eukrea CPUIMX51 platform. This includes - specific configurations for the module and its peripherals. - -choice - prompt "Baseboard" - depends on MACH_EUKREA_CPUIMX51 - default MACH_EUKREA_MBIMX51_BASEBOARD - -config MACH_EUKREA_MBIMX51_BASEBOARD - prompt "Eukrea MBIMX51 development board" - bool - select IMX_HAVE_PLATFORM_IMX_KEYPAD - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX - select LEDS_GPIO_REGISTER - help - This adds board specific devices that can be found on Eukrea's - MBIMX51 evaluation board. - -endchoice - config MACH_EUKREA_CPUIMX51SD bool "Support Eukrea CPUIMX51SD module" select SOC_IMX51 diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index ab939c5..55303d9 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -83,8 +83,6 @@ obj-$(CONFIG_MACH_MX53_EVK) += mach-mx53_evk.o obj-$(CONFIG_MACH_MX53_SMD) += mach-mx53_smd.o obj-$(CONFIG_MACH_MX53_LOCO) += mach-mx53_loco.o obj-$(CONFIG_MACH_MX53_ARD) += mach-mx53_ard.o -obj-$(CONFIG_MACH_EUKREA_CPUIMX51) += mach-cpuimx51.o -obj-$(CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD) += eukrea_mbimx51-baseboard.o obj-$(CONFIG_MACH_EUKREA_CPUIMX51SD) += mach-cpuimx51sd.o obj-$(CONFIG_MACH_EUKREA_MBIMXSD51_BASEBOARD) += eukrea_mbimxsd-baseboard.o obj-$(CONFIG_MX51_EFIKA_COMMON) += mx51_efika.o diff --git a/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c b/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c deleted file mode 100644 index a6a3ab8..0000000 --- a/arch/arm/mach-imx/eukrea_mbimx51-baseboard.c +++ /dev/null @@ -1,206 +0,0 @@ -/* - * - * Copyright (C) 2010 Eric Bénard - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include - -#include - -#include "devices-imx51.h" - -#define MBIMX51_TSC2007_GPIO IMX_GPIO_NR(3, 30) -#define MBIMX51_LED0 IMX_GPIO_NR(3, 5) -#define MBIMX51_LED1 IMX_GPIO_NR(3, 6) -#define MBIMX51_LED2 IMX_GPIO_NR(3, 7) -#define MBIMX51_LED3 IMX_GPIO_NR(3, 8) - -static const struct gpio_led mbimx51_leds[] __initconst = { - { - .name = "led0", - .default_trigger = "heartbeat", - .active_low = 1, - .gpio = MBIMX51_LED0, - }, - { - .name = "led1", - .default_trigger = "nand-disk", - .active_low = 1, - .gpio = MBIMX51_LED1, - }, - { - .name = "led2", - .default_trigger = "mmc0", - .active_low = 1, - .gpio = MBIMX51_LED2, - }, - { - .name = "led3", - .default_trigger = "default-on", - .active_low = 1, - .gpio = MBIMX51_LED3, - }, -}; - -static const struct gpio_led_platform_data mbimx51_leds_info __initconst = { - .leds = mbimx51_leds, - .num_leds = ARRAY_SIZE(mbimx51_leds), -}; - -static iomux_v3_cfg_t mbimx51_pads[] = { - /* UART2 */ - MX51_PAD_UART2_RXD__UART2_RXD, - MX51_PAD_UART2_TXD__UART2_TXD, - - /* UART3 */ - MX51_PAD_UART3_RXD__UART3_RXD, - MX51_PAD_UART3_TXD__UART3_TXD, - MX51_PAD_KEY_COL4__UART3_RTS, - MX51_PAD_KEY_COL5__UART3_CTS, - - /* TSC2007 IRQ */ - MX51_PAD_NANDF_D10__GPIO3_30, - - /* LEDS */ - MX51_PAD_DISPB2_SER_DIN__GPIO3_5, - MX51_PAD_DISPB2_SER_DIO__GPIO3_6, - MX51_PAD_DISPB2_SER_CLK__GPIO3_7, - MX51_PAD_DISPB2_SER_RS__GPIO3_8, - - /* KPP */ - MX51_PAD_KEY_ROW0__KEY_ROW0, - MX51_PAD_KEY_ROW1__KEY_ROW1, - MX51_PAD_KEY_ROW2__KEY_ROW2, - MX51_PAD_KEY_ROW3__KEY_ROW3, - MX51_PAD_KEY_COL0__KEY_COL0, - MX51_PAD_KEY_COL1__KEY_COL1, - MX51_PAD_KEY_COL2__KEY_COL2, - MX51_PAD_KEY_COL3__KEY_COL3, - - /* SD 1 */ - MX51_PAD_SD1_CMD__SD1_CMD, - MX51_PAD_SD1_CLK__SD1_CLK, - MX51_PAD_SD1_DATA0__SD1_DATA0, - MX51_PAD_SD1_DATA1__SD1_DATA1, - MX51_PAD_SD1_DATA2__SD1_DATA2, - MX51_PAD_SD1_DATA3__SD1_DATA3, - - /* SD 2 */ - MX51_PAD_SD2_CMD__SD2_CMD, - MX51_PAD_SD2_CLK__SD2_CLK, - MX51_PAD_SD2_DATA0__SD2_DATA0, - MX51_PAD_SD2_DATA1__SD2_DATA1, - MX51_PAD_SD2_DATA2__SD2_DATA2, - MX51_PAD_SD2_DATA3__SD2_DATA3, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static int mbimx51_keymap[] = { - KEY(0, 0, KEY_1), - KEY(0, 1, KEY_2), - KEY(0, 2, KEY_3), - KEY(0, 3, KEY_UP), - - KEY(1, 0, KEY_4), - KEY(1, 1, KEY_5), - KEY(1, 2, KEY_6), - KEY(1, 3, KEY_LEFT), - - KEY(2, 0, KEY_7), - KEY(2, 1, KEY_8), - KEY(2, 2, KEY_9), - KEY(2, 3, KEY_RIGHT), - - KEY(3, 0, KEY_0), - KEY(3, 1, KEY_DOWN), - KEY(3, 2, KEY_ESC), - KEY(3, 3, KEY_ENTER), -}; - -static const struct matrix_keymap_data mbimx51_map_data __initconst = { - .keymap = mbimx51_keymap, - .keymap_size = ARRAY_SIZE(mbimx51_keymap), -}; - -static int tsc2007_get_pendown_state(void) -{ - return !gpio_get_value(MBIMX51_TSC2007_GPIO); -} - -struct tsc2007_platform_data tsc2007_data = { - .model = 2007, - .x_plate_ohms = 180, - .get_pendown_state = tsc2007_get_pendown_state, -}; - -static struct i2c_board_info mbimx51_i2c_devices[] = { - { - I2C_BOARD_INFO("tsc2007", 0x49), - .irq = IMX_GPIO_TO_IRQ(MBIMX51_TSC2007_GPIO), - .platform_data = &tsc2007_data, - }, { - I2C_BOARD_INFO("tlv320aic23", 0x1a), - }, -}; - -/* - * baseboard initialization. - */ -void __init eukrea_mbimx51_baseboard_init(void) -{ - mxc_iomux_v3_setup_multiple_pads(mbimx51_pads, - ARRAY_SIZE(mbimx51_pads)); - - imx51_add_imx_uart(1, NULL); - imx51_add_imx_uart(2, &uart_pdata); - - gpio_request(MBIMX51_LED0, "LED0"); - gpio_direction_output(MBIMX51_LED0, 1); - gpio_free(MBIMX51_LED0); - gpio_request(MBIMX51_LED1, "LED1"); - gpio_direction_output(MBIMX51_LED1, 1); - gpio_free(MBIMX51_LED1); - gpio_request(MBIMX51_LED2, "LED2"); - gpio_direction_output(MBIMX51_LED2, 1); - gpio_free(MBIMX51_LED2); - gpio_request(MBIMX51_LED3, "LED3"); - gpio_direction_output(MBIMX51_LED3, 1); - gpio_free(MBIMX51_LED3); - - gpio_led_register_device(-1, &mbimx51_leds_info); - - imx51_add_imx_keypad(&mbimx51_map_data); - - gpio_request(MBIMX51_TSC2007_GPIO, "tsc2007_irq"); - gpio_direction_input(MBIMX51_TSC2007_GPIO); - irq_set_irq_type(gpio_to_irq(MBIMX51_TSC2007_GPIO), - IRQF_TRIGGER_FALLING); - i2c_register_board_info(1, mbimx51_i2c_devices, - ARRAY_SIZE(mbimx51_i2c_devices)); - - imx51_add_sdhci_esdhc_imx(0, NULL); - imx51_add_sdhci_esdhc_imx(1, NULL); -} diff --git a/arch/arm/mach-imx/mach-cpuimx51.c b/arch/arm/mach-imx/mach-cpuimx51.c deleted file mode 100644 index 944025d..0000000 --- a/arch/arm/mach-imx/mach-cpuimx51.c +++ /dev/null @@ -1,301 +0,0 @@ -/* - * - * Copyright (C) 2010 Eric Bénard - * - * based on board-mx51_babbage.c which is - * Copyright 2009 Freescale Semiconductor, Inc. All Rights Reserved. - * Copyright (C) 2009-2010 Amit Kucheria - * - * The code contained herein is licensed under the GNU General Public - * License. You may obtain a copy of the GNU General Public License - * Version 2 or later at the following locations: - * - * http://www.opensource.org/licenses/gpl-license.html - * http://www.gnu.org/copyleft/gpl.html - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "devices-imx51.h" - -#define CPUIMX51_USBH1_STP IMX_GPIO_NR(1, 27) -#define CPUIMX51_QUARTA_GPIO IMX_GPIO_NR(3, 28) -#define CPUIMX51_QUARTB_GPIO IMX_GPIO_NR(3, 25) -#define CPUIMX51_QUARTC_GPIO IMX_GPIO_NR(3, 26) -#define CPUIMX51_QUARTD_GPIO IMX_GPIO_NR(3, 27) -#define CPUIMX51_QUART_XTAL 14745600 -#define CPUIMX51_QUART_REGSHIFT 17 - -/* USB_CTRL_1 */ -#define MX51_USB_CTRL_1_OFFSET 0x10 -#define MX51_USB_CTRL_UH1_EXT_CLK_EN (1 << 25) - -#define MX51_USB_PLLDIV_12_MHZ 0x00 -#define MX51_USB_PLL_DIV_19_2_MHZ 0x01 -#define MX51_USB_PLL_DIV_24_MHZ 0x02 - -static struct plat_serial8250_port serial_platform_data[] = { - { - .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x400000), - .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTA_GPIO), - .irqflags = IRQF_TRIGGER_HIGH, - .uartclk = CPUIMX51_QUART_XTAL, - .regshift = CPUIMX51_QUART_REGSHIFT, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x800000), - .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTB_GPIO), - .irqflags = IRQF_TRIGGER_HIGH, - .uartclk = CPUIMX51_QUART_XTAL, - .regshift = CPUIMX51_QUART_REGSHIFT, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x1000000), - .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTC_GPIO), - .irqflags = IRQF_TRIGGER_HIGH, - .uartclk = CPUIMX51_QUART_XTAL, - .regshift = CPUIMX51_QUART_REGSHIFT, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - .mapbase = (unsigned long)(MX51_CS1_BASE_ADDR + 0x2000000), - .irq = IMX_GPIO_TO_IRQ(CPUIMX51_QUARTD_GPIO), - .irqflags = IRQF_TRIGGER_HIGH, - .uartclk = CPUIMX51_QUART_XTAL, - .regshift = CPUIMX51_QUART_REGSHIFT, - .iotype = UPIO_MEM, - .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST | UPF_IOREMAP, - }, { - } -}; - -static struct platform_device serial_device = { - .name = "serial8250", - .id = 0, - .dev = { - .platform_data = serial_platform_data, - }, -}; - -static struct platform_device *devices[] __initdata = { - &serial_device, -}; - -static iomux_v3_cfg_t eukrea_cpuimx51_pads[] = { - /* UART1 */ - MX51_PAD_UART1_RXD__UART1_RXD, - MX51_PAD_UART1_TXD__UART1_TXD, - MX51_PAD_UART1_RTS__UART1_RTS, - MX51_PAD_UART1_CTS__UART1_CTS, - - /* I2C2 */ - MX51_PAD_GPIO1_2__I2C2_SCL, - MX51_PAD_GPIO1_3__I2C2_SDA, - MX51_PAD_NANDF_D10__GPIO3_30, - - /* QUART IRQ */ - MX51_PAD_NANDF_D15__GPIO3_25, - MX51_PAD_NANDF_D14__GPIO3_26, - MX51_PAD_NANDF_D13__GPIO3_27, - MX51_PAD_NANDF_D12__GPIO3_28, - - /* USB HOST1 */ - MX51_PAD_USBH1_CLK__USBH1_CLK, - MX51_PAD_USBH1_DIR__USBH1_DIR, - MX51_PAD_USBH1_NXT__USBH1_NXT, - MX51_PAD_USBH1_DATA0__USBH1_DATA0, - MX51_PAD_USBH1_DATA1__USBH1_DATA1, - MX51_PAD_USBH1_DATA2__USBH1_DATA2, - MX51_PAD_USBH1_DATA3__USBH1_DATA3, - MX51_PAD_USBH1_DATA4__USBH1_DATA4, - MX51_PAD_USBH1_DATA5__USBH1_DATA5, - MX51_PAD_USBH1_DATA6__USBH1_DATA6, - MX51_PAD_USBH1_DATA7__USBH1_DATA7, - MX51_PAD_USBH1_STP__USBH1_STP, -}; - -static const struct mxc_nand_platform_data - eukrea_cpuimx51_nand_board_info __initconst = { - .width = 1, - .hw_ecc = 1, - .flash_bbt = 1, -}; - -static const struct imxuart_platform_data uart_pdata __initconst = { - .flags = IMXUART_HAVE_RTSCTS, -}; - -static const -struct imxi2c_platform_data eukrea_cpuimx51_i2c_data __initconst = { - .bitrate = 100000, -}; - -static struct i2c_board_info eukrea_cpuimx51_i2c_devices[] = { - { - I2C_BOARD_INFO("pcf8563", 0x51), - }, -}; - -/* This function is board specific as the bit mask for the plldiv will also -be different for other Freescale SoCs, thus a common bitmask is not -possible and cannot get place in /plat-mxc/ehci.c.*/ -static int initialize_otg_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* Set the PHY clock to 19.2MHz */ - v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - v &= ~MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK; - v |= MX51_USB_PLL_DIV_19_2_MHZ; - __raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC2_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(0, MXC_EHCI_INTERNAL_PHY); -} - -static int initialize_usbh1_port(struct platform_device *pdev) -{ - u32 v; - void __iomem *usb_base; - void __iomem *usbother_base; - - usb_base = ioremap(MX51_USB_OTG_BASE_ADDR, SZ_4K); - if (!usb_base) - return -ENOMEM; - usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET; - - /* The clock for the USBH1 ULPI port will come externally from the PHY. */ - v = __raw_readl(usbother_base + MX51_USB_CTRL_1_OFFSET); - __raw_writel(v | MX51_USB_CTRL_UH1_EXT_CLK_EN, usbother_base + MX51_USB_CTRL_1_OFFSET); - iounmap(usb_base); - - mdelay(10); - - return mx51_initialize_usb_hw(1, MXC_EHCI_POWER_PINS_ENABLED | - MXC_EHCI_ITC_NO_THRESHOLD); -} - -static const struct mxc_usbh_platform_data dr_utmi_config __initconst = { - .init = initialize_otg_port, - .portsc = MXC_EHCI_UTMI_16BIT, -}; - -static const struct fsl_usb2_platform_data usb_pdata __initconst = { - .operating_mode = FSL_USB2_DR_DEVICE, - .phy_mode = FSL_USB2_PHY_UTMI_WIDE, -}; - -static const struct mxc_usbh_platform_data usbh1_config __initconst = { - .init = initialize_usbh1_port, - .portsc = MXC_EHCI_MODE_ULPI, -}; - -static int otg_mode_host; - -static int __init eukrea_cpuimx51_otg_mode(char *options) -{ - if (!strcmp(options, "host")) - otg_mode_host = 1; - else if (!strcmp(options, "device")) - otg_mode_host = 0; - else - pr_info("otg_mode neither \"host\" nor \"device\". " - "Defaulting to device\n"); - return 0; -} -__setup("otg_mode=", eukrea_cpuimx51_otg_mode); - -/* - * Board specific initialization. - */ -static void __init eukrea_cpuimx51_init(void) -{ - imx51_soc_init(); - - mxc_iomux_v3_setup_multiple_pads(eukrea_cpuimx51_pads, - ARRAY_SIZE(eukrea_cpuimx51_pads)); - - imx51_add_imx_uart(0, &uart_pdata); - imx51_add_mxc_nand(&eukrea_cpuimx51_nand_board_info); - - gpio_request(CPUIMX51_QUARTA_GPIO, "quarta_irq"); - gpio_direction_input(CPUIMX51_QUARTA_GPIO); - gpio_free(CPUIMX51_QUARTA_GPIO); - gpio_request(CPUIMX51_QUARTB_GPIO, "quartb_irq"); - gpio_direction_input(CPUIMX51_QUARTB_GPIO); - gpio_free(CPUIMX51_QUARTB_GPIO); - gpio_request(CPUIMX51_QUARTC_GPIO, "quartc_irq"); - gpio_direction_input(CPUIMX51_QUARTC_GPIO); - gpio_free(CPUIMX51_QUARTC_GPIO); - gpio_request(CPUIMX51_QUARTD_GPIO, "quartd_irq"); - gpio_direction_input(CPUIMX51_QUARTD_GPIO); - gpio_free(CPUIMX51_QUARTD_GPIO); - - imx51_add_fec(NULL); - platform_add_devices(devices, ARRAY_SIZE(devices)); - - imx51_add_imx_i2c(1, &eukrea_cpuimx51_i2c_data); - i2c_register_board_info(1, eukrea_cpuimx51_i2c_devices, - ARRAY_SIZE(eukrea_cpuimx51_i2c_devices)); - - if (otg_mode_host) - imx51_add_mxc_ehci_otg(&dr_utmi_config); - else { - initialize_otg_port(NULL); - imx51_add_fsl_usb2_udc(&usb_pdata); - } - imx51_add_mxc_ehci_hs(1, &usbh1_config); - -#ifdef CONFIG_MACH_EUKREA_MBIMX51_BASEBOARD - eukrea_mbimx51_baseboard_init(); -#endif -} - -static void __init eukrea_cpuimx51_timer_init(void) -{ - mx51_clocks_init(32768, 24000000, 22579200, 0); -} - -static struct sys_timer mxc_timer = { - .init = eukrea_cpuimx51_timer_init, -}; - -MACHINE_START(EUKREA_CPUIMX51, "Eukrea CPUIMX51 Module") - /* Maintainer: Eric Bénard */ - .atag_offset = 0x100, - .map_io = mx51_map_io, - .init_early = imx51_init_early, - .init_irq = mx51_init_irq, - .handle_irq = imx51_handle_irq, - .timer = &mxc_timer, - .init_machine = eukrea_cpuimx51_init, - .restart = mxc_restart, -MACHINE_END -- 1.7.7.6 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/