Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Thu, 8 Aug 2002 23:20:45 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Thu, 8 Aug 2002 23:20:45 -0400 Received: from rwcrmhc51.attbi.com ([204.127.198.38]:61313 "EHLO rwcrmhc51.attbi.com") by vger.kernel.org with ESMTP id ; Thu, 8 Aug 2002 23:19:32 -0400 Message-ID: <3D53359B.BC5980FB@attbi.com> Date: Thu, 08 Aug 2002 23:23:07 -0400 From: Albert Cranford X-Mailer: Mozilla 4.79 [en] (X11; U; Linux 2.4.19 i686) X-Accept-Language: en MIME-Version: 1.0 To: Linus Torvalds , Linux Kernel List Subject: [patch 3/4] 2.5.30 i2c updates Content-Type: text/plain; charset=iso-8859-1 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 46623 Lines: 1421 Hello Linus, Please apply the following four patches that update 2.5.30 with these I2C changes: o Support for SMBus 2.0 PEC Packet Error Checking o New adapter-i2c-frodo for SA 1110 board o New adapter-i2c-rpx for embeded MPC8XX o Replace depreciated cli()&sti() with spin_{un}lock_irq() o Updated documentation Thanks, Albert --- /dev/null 1994-07-17 19:46:18.000000000 -0400 +++ linux/include/linux/i2c-algo-8xx.h 2002-06-11 22:29:54.000000000 -0400 @@ -0,0 +1,43 @@ +/* ------------------------------------------------------------------------- */ +/* i2c-algo-8xx.h i2c driver algorithms for MPX8XX CPM */ +/* + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +/* ------------------------------------------------------------------------- */ + +/* $Id: i2c-algo-8xx.h,v 1.3 2002/06/12 02:29:54 mds Exp $ */ + +#ifndef I2C_ALGO_8XX_H +#define I2C_ALGO_8XX_H 1 + +#include + +struct i2c_algo_8xx_data { + uint dp_addr; + int reloc; + volatile i2c8xx_t *i2c; + volatile iic_t *iip; + volatile cpm8xx_t *cp; + + int (*setisr) (int irq, + void (*func)(void *, void *), + void *data); + + u_char temp[513]; +}; + +int i2c_8xx_add_bus(struct i2c_adapter *); +int i2c_8xx_del_bus(struct i2c_adapter *); + +#endif /* I2C_ALGO_8XX_H */ --- linux-2.5.26/drivers/i2c/i2c-algo-bit.c.orig 2002-07-05 19:42:28.000000000 -0400 +++ linux/drivers/i2c/i2c-algo-bit.c 2002-07-07 20:41:49.000000000 -0400 @@ -21,7 +21,7 @@ /* With some changes from Ky?sti M?lkki and even Frodo Looijaard */ -/* $Id: i2c-algo-bit.c,v 1.34 2001/11/19 18:45:02 mds Exp $ */ +/* $Id: i2c-algo-bit.c,v 1.37 2002/07/08 00:41:49 mds Exp $ */ #include #include @@ -143,7 +148,7 @@ /* scl, sda may not be high */ DEBPROTO(printk(" Sr ")); setsda(adap,1); - setscl(adap,1); + sclhi(adap); udelay(adap->udelay); sdalo(adap); --- /dev/null 1994-07-17 19:46:18.000000000 -0400 +++ linux/drivers/i2c/i2c-algo-ibm_ocp.c 2002-07-03 21:00:38.000000000 -0400 @@ -0,0 +1,966 @@ +/* + ------------------------------------------------------------------------- + i2c-algo-ibm_ocp.c i2c driver algorithms for IBM PPC 405 adapters + ------------------------------------------------------------------------- + + Ian DaSilva, MontaVista Software, Inc. + idasilva@mvista.com or source@mvista.com + + Copyright 2000 MontaVista Software Inc. + + Changes made to support the IIC peripheral on the IBM PPC 405 + + + --------------------------------------------------------------------------- + This file was highly leveraged from i2c-algo-pcf.c, which was created + by Simon G. Vogl and Hans Berglund: + + + Copyright (C) 1995-1997 Simon G. Vogl + 1998-2000 Hans Berglund + + With some changes from Ky?sti M?lkki and + Frodo Looijaard ,and also from Martin Bailey + + + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + --------------------------------------------------------------------------- + + History: 01/20/12 - Armin + akuster@mvista.com + ported up to 2.4.16+ + + Version 02/03/25 - Armin + converted to ocp format + removed commented out or #if 0 code + added G?rard Basler's fix to iic_combined_transaction() such that it + returns the number of successfully completed transfers . +*/ + + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "i2c-algo-ibm_ocp.h" +//ACC#include + +#ifdef MODULE_LICENSE +MODULE_LICENSE("GPL"); +#endif + + +/* ----- global defines ----------------------------------------------- */ +#define DEB(x) if (i2c_debug>=1) x +#define DEB2(x) if (i2c_debug>=2) x +#define DEB3(x) if (i2c_debug>=3) x /* print several statistical values*/ +#define DEBPROTO(x) if (i2c_debug>=9) x; + /* debug the protocol by showing transferred bits */ +#define DEF_TIMEOUT 5 + +/* debugging - slow down transfer to have a look at the data .. */ +/* I use this with two leds&resistors, each one connected to sda,scl */ +/* respectively. This makes sure that the algorithm works. Some chips */ +/* might not like this, as they have an internal timeout of some mils */ +/* +#define SLO_IO jif=jiffies;while(jiffies<=jif+i2c_table[minor].veryslow)\ + if (need_resched) schedule(); +*/ + + +/* ----- global variables --------------------------------------------- */ + +#ifdef SLO_IO + int jif; +#endif + +/* module parameters: + */ +static int i2c_debug=0; +static int iic_scan=0; /* have a look at what's hanging 'round */ + +/* --- setting states on the bus with the right timing: --------------- */ + +#define iic_outb(adap, reg, val) adap->setiic(adap->data, (int) &(reg), val) +#define iic_inb(adap, reg) adap->getiic(adap->data, (int) &(reg)) + +#define IICO_I2C_SDAHIGH 0x0780 +#define IICO_I2C_SDALOW 0x0781 +#define IICO_I2C_SCLHIGH 0x0782 +#define IICO_I2C_SCLLOW 0x0783 +#define IICO_I2C_LINEREAD 0x0784 + +#define IIC_SINGLE_XFER 0 +#define IIC_COMBINED_XFER 1 + +#define IIC_ERR_LOST_ARB -2 +#define IIC_ERR_INCOMPLETE_XFR -3 +#define IIC_ERR_NACK -1 + +/* --- other auxiliary functions -------------------------------------- */ + + +// +// Description: Puts this process to sleep for a period equal to timeout +// +static inline void iic_sleep(unsigned long timeout) +{ + schedule_timeout( timeout * HZ); +} + + +// +// Description: This performs the IBM PPC 405 IIC initialization sequence +// as described in the PPC405GP data book. +// +static int iic_init (struct i2c_algo_iic_data *adap) +{ + struct iic_regs *iic; + struct iic_ibm *adap_priv_data = adap->data; + unsigned short retval; + iic = (struct iic_regs *) adap_priv_data->iic_base; + + /* Clear master low master address */ + iic_outb(adap,iic->lmadr, 0); + + /* Clear high master address */ + iic_outb(adap,iic->hmadr, 0); + + /* Clear low slave address */ + iic_outb(adap,iic->lsadr, 0); + + /* Clear high slave address */ + iic_outb(adap,iic->hsadr, 0); + + /* Clear status */ + iic_outb(adap,iic->sts, 0x0a); + + /* Clear extended status */ + iic_outb(adap,iic->extsts, 0x8f); + + /* Set clock division */ + iic_outb(adap,iic->clkdiv, 0x04); + + retval = iic_inb(adap, iic->clkdiv); + DEB(printk("iic_init: CLKDIV register = %x\n", retval)); + + /* Enable interrupts on Requested Master Transfer Complete */ + iic_outb(adap,iic->intmsk, 0x01); + + /* Clear transfer count */ + iic_outb(adap,iic->xfrcnt, 0x0); + + /* Clear extended control and status */ + iic_outb(adap,iic->xtcntlss, 0xf0); + + /* Set mode control (flush master data buf, enable hold SCL, exit */ + /* unknown state. */ + iic_outb(adap,iic->mdcntl, 0x47); + + /* Clear control register */ + iic_outb(adap,iic->cntl, 0x0); + + DEB2(printk(KERN_DEBUG "iic_init: Initialized IIC on PPC 405\n")); + return 0; +} + + +// +// Description: After we issue a transaction on the IIC bus, this function +// is called. It puts this process to sleep until we get an interrupt from +// from the controller telling us that the transaction we requested in complete. +// +static int wait_for_pin(struct i2c_algo_iic_data *adap, int *status) +{ + + int timeout = DEF_TIMEOUT; + int retval; + struct iic_regs *iic; + struct iic_ibm *adap_priv_data = adap->data; + iic = (struct iic_regs *) adap_priv_data->iic_base; + + + *status = iic_inb(adap, iic->sts); +#ifndef STUB_I2C + + while (timeout-- && (*status & 0x01)) { + adap->waitforpin(adap->data); + *status = iic_inb(adap, iic->sts); + } +#endif + if (timeout <= 0) { + /* Issue stop signal on the bus, and force an interrupt */ + retval = iic_inb(adap, iic->cntl); + iic_outb(adap, iic->cntl, retval | 0x80); + /* Clear status register */ + iic_outb(adap, iic->sts, 0x0a); + /* Exit unknown bus state */ + retval = iic_inb(adap, iic->mdcntl); + iic_outb(adap, iic->mdcntl, (retval | 0x02)); + + // Check the status of the controller. Does it still see a + // pending transfer, even though we've tried to stop any + // ongoing transaction? + retval = iic_inb(adap, iic->sts); + retval = retval & 0x01; + if(retval) { + // The iic controller is hosed. It is not responding to any + // of our commands. We have already tried to force it into + // a known state, but it has not worked. Our only choice now + // is a soft reset, which will clear all registers, and force + // us to re-initialize the controller. + /* Soft reset */ + iic_outb(adap, iic->xtcntlss, 0x01); + udelay(500); + iic_init(adap); + /* Is the pending transfer bit in the sts reg finally cleared? */ + retval = iic_inb(adap, iic->sts); + retval = retval & 0x01; + if(retval) { + printk(KERN_CRIT "The IIC Controller is hosed. A processor reset is required\n"); + } + // For some reason, even though the interrupt bit in this + // register was set during iic_init, it didn't take. We + // need to set it again. Don't ask me why....this is just what + // I saw when testing timeouts. + iic_outb(adap, iic->intmsk, 0x01); + } + return(-1); + } + else + return(0); +} + + +//------------------------------------ +// Utility functions +// + + +// +// Description: Look at the status register to see if there was an error +// in the requested transaction. If there is, look at the extended status +// register and determine the exact cause. +// +int analyze_status(struct i2c_algo_iic_data *adap, int *error_code) +{ + int ret; + struct iic_regs *iic; + struct iic_ibm *adap_priv_data = adap->data; + iic = (struct iic_regs *) adap_priv_data->iic_base; + + + ret = iic_inb(adap, iic->sts); + if(ret & 0x04) { + // Error occurred + ret = iic_inb(adap, iic->extsts); + if(ret & 0x04) { + // Lost arbitration + *error_code = IIC_ERR_LOST_ARB; + } + if(ret & 0x02) { + // Incomplete transfer + *error_code = IIC_ERR_INCOMPLETE_XFR; + } + if(ret & 0x01) { + // Master transfer aborted by a NACK during the transfer of the + // address byte + *error_code = IIC_ERR_NACK; + } + return -1; + } + return 0; +} + + +// +// Description: This function is called by the upper layers to do the +// grunt work for a master send transaction +// +static int iic_sendbytes(struct i2c_adapter *i2c_adap,const char *buf, + int count, int xfer_flag) +{ + struct iic_regs *iic; + struct i2c_algo_iic_data *adap = i2c_adap->algo_data; + struct iic_ibm *adap_priv_data = adap->data; + int wrcount, status, timeout; + int loops, remainder, i, j; + int ret, error_code; + iic = (struct iic_regs *) adap_priv_data->iic_base; + + + if( count == 0 ) return 0; + wrcount = 0; + loops = count / 4; + remainder = count % 4; + + if((loops > 1) && (remainder == 0)) { + for(i=0; i<(loops-1); i++) { + // + // Write four bytes to master data buffer + // + for(j=0; j<4; j++) { + iic_outb(adap, iic->mdbuf, + buf[wrcount++]); + } + // + // Issue command to IICO device to begin transmission + // + iic_outb(adap, iic->cntl, 0x35); + // + // Wait for transmission to complete. When it does, + //loop to the top of the for statement and write the + // next four bytes. + // + timeout = wait_for_pin(adap, &status); + if(timeout < 0) { + // + // Error handling + // + //printk(KERN_ERR "Error: write timeout\n"); + return wrcount; + } + ret = analyze_status(adap, &error_code); + if(ret < 0) { + if(error_code == IIC_ERR_INCOMPLETE_XFR) { + // Return the number of bytes transferred + ret = iic_inb(adap, iic->xfrcnt); + ret = ret & 0x07; + return (wrcount-4+ret); + } + else return error_code; + } + } + } + else if((loops >= 1) && (remainder > 0)){ + //printk(KERN_DEBUG "iic_sendbytes: (loops >= 1)\n"); + for(i=0; imdbuf, + buf[wrcount++]); + } + // + // Issue command to IICO device to begin transmission + // + iic_outb(adap, iic->cntl, 0x35); + // + // Wait for transmission to complete. When it does, + //loop to the top of the for statement and write the + // next four bytes. + // + timeout = wait_for_pin(adap, &status); + if(timeout < 0) { + // + // Error handling + // + //printk(KERN_ERR "Error: write timeout\n"); + return wrcount; + } + ret = analyze_status(adap, &error_code); + if(ret < 0) { + if(error_code == IIC_ERR_INCOMPLETE_XFR) { + // Return the number of bytes transferred + ret = iic_inb(adap, iic->xfrcnt); + ret = ret & 0x07; + return (wrcount-4+ret); + } + else return error_code; + } + } + } + + //printk(KERN_DEBUG "iic_sendbytes: expedite write\n"); + if(remainder == 0) remainder = 4; + // remainder = remainder - 1; + // + // Write the remaining bytes (less than or equal to 4) + // + for(i=0; imdbuf, buf[wrcount++]); + //printk(KERN_DEBUG "iic_sendbytes: data transferred = %x, wrcount = %d\n", buf[wrcount-1], (wrcount-1)); + } + //printk(KERN_DEBUG "iic_sendbytes: Issuing write\n"); + + if(xfer_flag == IIC_COMBINED_XFER) { + iic_outb(adap, iic->cntl, (0x09 | ((remainder-1) << 4))); + } + else { + iic_outb(adap, iic->cntl, (0x01 | ((remainder-1) << 4))); + } + DEB2(printk(KERN_DEBUG "iic_sendbytes: Waiting for interrupt\n")); + timeout = wait_for_pin(adap, &status); + if(timeout < 0) { + // + // Error handling + // + //printk(KERN_ERR "Error: write timeout\n"); + return wrcount; + } + ret = analyze_status(adap, &error_code); + if(ret < 0) { + if(error_code == IIC_ERR_INCOMPLETE_XFR) { + // Return the number of bytes transferred + ret = iic_inb(adap, iic->xfrcnt); + ret = ret & 0x07; + return (wrcount-4+ret); + } + else return error_code; + } + DEB2(printk(KERN_DEBUG "iic_sendbytes: Got interrupt\n")); + return wrcount; +} + + +// +// Description: Called by the upper layers to do the grunt work for +// a master read transaction. +// +static int iic_readbytes(struct i2c_adapter *i2c_adap, char *buf, int count, int xfer_type) +{ + struct iic_regs *iic; + int rdcount=0, i, status, timeout; + struct i2c_algo_iic_data *adap = i2c_adap->algo_data; + struct iic_ibm *adap_priv_data = adap->data; + int loops, remainder, j; + int ret, error_code; + iic = (struct iic_regs *) adap_priv_data->iic_base; + + if(count == 0) return 0; + loops = count / 4; + remainder = count % 4; + + //printk(KERN_DEBUG "iic_readbytes: loops = %d, remainder = %d\n", loops, remainder); + + if((loops > 1) && (remainder == 0)) { + //printk(KERN_DEBUG "iic_readbytes: (loops > 1) && (remainder == 0)\n"); + for(i=0; i<(loops-1); i++) { + // + // Issue command to begin master read (4 bytes maximum) + // + //printk(KERN_DEBUG "--->Issued read command\n"); + iic_outb(adap, iic->cntl, 0x37); + // + // Wait for transmission to complete. When it does, + // loop to the top of the for statement and write the + // next four bytes. + // + //printk(KERN_DEBUG "--->Waiting for interrupt\n"); + timeout = wait_for_pin(adap, &status); + if(timeout < 0) { + // Error Handler + //printk(KERN_ERR "Error: read timed out\n"); + return rdcount; + } + //printk(KERN_DEBUG "--->Got interrupt\n"); + + ret = analyze_status(adap, &error_code); + if(ret < 0) { + if(error_code == IIC_ERR_INCOMPLETE_XFR) + return rdcount; + else + return error_code; + } + + for(j=0; j<4; j++) { + // Wait for data to shuffle to top of data buffer + // This value needs to optimized. + udelay(1); + buf[rdcount] = iic_inb(adap, iic->mdbuf); + rdcount++; + //printk(KERN_DEBUG "--->Read one byte\n"); + } + } + } + + else if((loops >= 1) && (remainder > 0)){ + //printk(KERN_DEBUG "iic_readbytes: (loops >=1) && (remainder > 0)\n"); + for(i=0; iIssued read command\n"); + iic_outb(adap, iic->cntl, 0x37); + // + // Wait for transmission to complete. When it does, + // loop to the top of the for statement and write the + // next four bytes. + // + //printk(KERN_DEBUG "--->Waiting for interrupt\n"); + timeout = wait_for_pin(adap, &status); + if(timeout < 0) { + // Error Handler + //printk(KERN_ERR "Error: read timed out\n"); + return rdcount; + } + //printk(KERN_DEBUG "--->Got interrupt\n"); + + ret = analyze_status(adap, &error_code); + if(ret < 0) { + if(error_code == IIC_ERR_INCOMPLETE_XFR) + return rdcount; + else + return error_code; + } + + for(j=0; j<4; j++) { + // Wait for data to shuffle to top of data buffer + // This value needs to optimized. + udelay(1); + buf[rdcount] = iic_inb(adap, iic->mdbuf); + rdcount++; + //printk(KERN_DEBUG "--->Read one byte\n"); + } + } + } + + //printk(KERN_DEBUG "iic_readbytes: expedite read\n"); + if(remainder == 0) remainder = 4; + DEB2(printk(KERN_DEBUG "iic_readbytes: writing %x to IICO_CNTL\n", (0x03 | ((remainder-1) << 4)))); + + if(xfer_type == IIC_COMBINED_XFER) { + iic_outb(adap, iic->cntl, (0x0b | ((remainder-1) << 4))); + } + else { + iic_outb(adap, iic->cntl, (0x03 | ((remainder-1) << 4))); + } + DEB2(printk(KERN_DEBUG "iic_readbytes: Wait for pin\n")); + timeout = wait_for_pin(adap, &status); + DEB2(printk(KERN_DEBUG "iic_readbytes: Got the interrupt\n")); + if(timeout < 0) { + // Error Handler + //printk(KERN_ERR "Error: read timed out\n"); + return rdcount; + } + + ret = analyze_status(adap, &error_code); + if(ret < 0) { + if(error_code == IIC_ERR_INCOMPLETE_XFR) + return rdcount; + else + return error_code; + } + + //printk(KERN_DEBUG "iic_readbyte: Begin reading data buffer\n"); + for(i=0; imdbuf); + // printk(KERN_DEBUG "iic_readbytes: Character read = %x\n", buf[rdcount]); + rdcount++; + } + + return rdcount; +} + + +// +// Description: This function implements combined transactions. Combined +// transactions consist of combinations of reading and writing blocks of data. +// Each transfer (i.e. a read or a write) is separated by a repeated start +// condition. +// +static int iic_combined_transaction(struct i2c_adapter *i2c_adap, struct i2c_msg msgs[], int num) +{ + int i; + struct i2c_msg *pmsg; + int ret; + + DEB2(printk(KERN_DEBUG "Beginning combined transaction\n")); + for(i=0; i < num; i++) { + pmsg = &msgs[i]; + if(pmsg->flags & I2C_M_RD) { + + // Last read or write segment needs to be terminated with a stop + if(i < num-1) { + DEB2(printk(KERN_DEBUG "This one is a read\n")); + } + else { + DEB2(printk(KERN_DEBUG "Doing the last read\n")); + } + ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, (i < num-1) ? IIC_COMBINED_XFER : IIC_SINGLE_XFER); + + if (ret != pmsg->len) { + DEB2(printk("i2c-algo-ppc405.o: fail: " + "only read %d bytes.\n",ret)); + return i; + } + else { + DEB2(printk("i2c-algo-ppc405.o: read %d bytes.\n",ret)); + } + } + else if(!(pmsg->flags & I2C_M_RD)) { + + // Last read or write segment needs to be terminated with a stop + if(i < num-1) { + DEB2(printk(KERN_DEBUG "This one is a write\n")); + } + else { + DEB2(printk(KERN_DEBUG "Doing the last write\n")); + } + ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, (i < num-1) ? IIC_COMBINED_XFER : IIC_SINGLE_XFER); + + if (ret != pmsg->len) { + DEB2(printk("i2c-algo-ppc405.o: fail: " + "only wrote %d bytes.\n",ret)); + return i; + } + else { + DEB2(printk("i2c-algo-ppc405.o: wrote %d bytes.\n",ret)); + } + } + } + + return num; +} + + +// +// Description: Whenever we initiate a transaction, the first byte clocked +// onto the bus after the start condition is the address (7 bit) of the +// device we want to talk to. This function manipulates the address specified +// so that it makes sense to the hardware when written to the IIC peripheral. +// +// Note: 10 bit addresses are not supported in this driver, although they are +// supported by the hardware. This functionality needs to be implemented. +// +static inline int iic_doAddress(struct i2c_algo_iic_data *adap, + struct i2c_msg *msg, int retries) +{ + struct iic_regs *iic; + unsigned short flags = msg->flags; + unsigned char addr; + struct iic_ibm *adap_priv_data = adap->data; + iic = (struct iic_regs *) adap_priv_data->iic_base; + +// +// The following segment for 10 bit addresses needs to be ported +// +/* Ten bit addresses not supported right now + if ( (flags & I2C_M_TEN) ) { + // a ten bit address + addr = 0xf0 | (( msg->addr >> 7) & 0x03); + DEB2(printk(KERN_DEBUG "addr0: %d\n",addr)); + // try extended address code... + ret = try_address(adap, addr, retries); + if (ret!=1) { + printk(KERN_ERR "iic_doAddress: died at extended address code.\n"); + return -EREMOTEIO; + } + // the remaining 8 bit address + iic_outb(adap,msg->addr & 0x7f); + // Status check comes here + if (ret != 1) { + printk(KERN_ERR "iic_doAddress: died at 2nd address code.\n"); + return -EREMOTEIO; + } + if ( flags & I2C_M_RD ) { + i2c_repstart(adap); + // okay, now switch into reading mode + addr |= 0x01; + ret = try_address(adap, addr, retries); + if (ret!=1) { + printk(KERN_ERR "iic_doAddress: died at extended address code.\n"); + return -EREMOTEIO; + } + } + } else ----------> // normal 7 bit address + +Ten bit addresses not supported yet */ + + addr = ( msg->addr << 1 ); + if (flags & I2C_M_RD ) + addr |= 1; + if (flags & I2C_M_REV_DIR_ADDR ) + addr ^= 1; + // + // Write to the low slave address + // + iic_outb(adap, iic->lmadr, addr); + // + // Write zero to the high slave register since we are + // only using 7 bit addresses + // + iic_outb(adap, iic->hmadr, 0); + + return 0; +} + + +// +// Description: Prepares the controller for a transaction (clearing status +// registers, data buffers, etc), and then calls either iic_readbytes or +// iic_sendbytes to do the actual transaction. +// +static int iic_xfer(struct i2c_adapter *i2c_adap, + struct i2c_msg msgs[], + int num) +{ + struct iic_regs *iic; + struct i2c_algo_iic_data *adap = i2c_adap->algo_data; + struct iic_ibm *adap_priv_data = adap->data; + struct i2c_msg *pmsg; + int i = 0; + int ret; + iic = (struct iic_regs *) adap_priv_data->iic_base; + + pmsg = &msgs[i]; + + // + // Clear status register + // + DEB2(printk(KERN_DEBUG "iic_xfer: iic_xfer: Clearing status register\n")); + iic_outb(adap, iic->sts, 0x0a); + + // + // Wait for any pending transfers to complete + // + DEB2(printk(KERN_DEBUG "iic_xfer: Waiting for any pending transfers to complete\n")); + while((ret = iic_inb(adap, iic->sts)) == 0x01) { + ; + } + + // + // Flush master data buf + // + DEB2(printk(KERN_DEBUG "iic_xfer: Clearing master data buffer\n")); + ret = iic_inb(adap, iic->mdcntl); + iic_outb(adap, iic->mdcntl, ret | 0x40); + + // + // Load slave address + // + DEB2(printk(KERN_DEBUG "iic_xfer: Loading slave address\n")); + ret = iic_doAddress(adap, pmsg, i2c_adap->retries); + + // + // Check to see if the bus is busy + // + ret = iic_inb(adap, iic->extsts); + // Mask off the irrelevent bits + ret = ret & 0x70; + // When the bus is free, the BCS bits in the EXTSTS register are 0b100 + if(ret != 0x40) return IIC_ERR_LOST_ARB; + + // + // Combined transaction (read and write) + // + if(num > 1) { + DEB2(printk(KERN_DEBUG "iic_xfer: Call combined transaction\n")); + ret = iic_combined_transaction(i2c_adap, msgs, num); + } + // + // Read only + // + else if((num == 1) && (pmsg->flags & I2C_M_RD)) { + // + // Tell device to begin reading data from the master data + // + DEB2(printk(KERN_DEBUG "iic_xfer: Call adapter's read\n")); + ret = iic_readbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER); + } + // + // Write only + // + else if((num == 1 ) && (!(pmsg->flags & I2C_M_RD))) { + // + // Write data to master data buffers and tell our device + // to begin transmitting + // + DEB2(printk(KERN_DEBUG "iic_xfer: Call adapter's write\n")); + ret = iic_sendbytes(i2c_adap, pmsg->buf, pmsg->len, IIC_SINGLE_XFER); + } + + return ret; +} + + +// +// Description: Implements device specific ioctls. Higher level ioctls can +// be found in i2c-core.c and are typical of any i2c controller (specifying +// slave address, timeouts, etc). These ioctls take advantage of any hardware +// features built into the controller for which this algorithm-adapter set +// was written. These ioctls allow you to take control of the data and clock +// lines on the IBM PPC 405 IIC controller and set the either high or low, +// similar to a GPIO pin. +// +static int algo_control(struct i2c_adapter *adapter, + unsigned int cmd, unsigned long arg) +{ + struct iic_regs *iic; + struct i2c_algo_iic_data *adap = adapter->algo_data; + struct iic_ibm *adap_priv_data = adap->data; + int ret=0; + int lines; + iic = (struct iic_regs *) adap_priv_data->iic_base; + + lines = iic_inb(adap, iic->directcntl); + + if (cmd == IICO_I2C_SDAHIGH) { + lines = lines & 0x01; + if( lines ) lines = 0x04; + else lines = 0; + iic_outb(adap, iic->directcntl,(0x08|lines)); + } + else if (cmd == IICO_I2C_SDALOW) { + lines = lines & 0x01; + if( lines ) lines = 0x04; + else lines = 0; + iic_outb(adap, iic->directcntl,(0x00|lines)); + } + else if (cmd == IICO_I2C_SCLHIGH) { + lines = lines & 0x02; + if( lines ) lines = 0x08; + else lines = 0; + iic_outb(adap, iic->directcntl,(0x04|lines)); + } + else if (cmd == IICO_I2C_SCLLOW) { + lines = lines & 0x02; + if( lines ) lines = 0x08; + else lines = 0; + iic_outb(adap, iic->directcntl,(0x00|lines)); + } + else if (cmd == IICO_I2C_LINEREAD) { + ret = lines; + } + return ret; +} + + +static u32 iic_func(struct i2c_adapter *adap) +{ + return I2C_FUNC_SMBUS_EMUL | I2C_FUNC_10BIT_ADDR | + I2C_FUNC_PROTOCOL_MANGLING; +} + + +/* -----exported algorithm data: ------------------------------------- */ + +static struct i2c_algorithm iic_algo = { + "IBM on-chip IIC algorithm", + I2C_ALGO_OCP, + iic_xfer, + NULL, + NULL, /* slave_xmit */ + NULL, /* slave_recv */ + algo_control, /* ioctl */ + iic_func, /* functionality */ +}; + + +/* + * registering functions to load algorithms at runtime + */ + + +// +// Description: Register bus structure +// +int i2c_iic_add_bus(struct i2c_adapter *adap) +{ + struct i2c_algo_iic_data *iic_adap = adap->algo_data; + + DEB2(printk(KERN_DEBUG "i2c-algo-iic.o: hw routines for %s registered.\n", + adap->name)); + + /* register new adapter to i2c module... */ + + adap->id |= iic_algo.id; + adap->algo = &iic_algo; + + adap->timeout = 100; /* default values, should */ + adap->retries = 3; /* be replaced by defines */ + +#ifdef MODULE + MOD_INC_USE_COUNT; +#endif + + iic_init(iic_adap); + i2c_add_adapter(adap); + + /* scan bus */ + /* By default scanning the bus is turned off. */ + if (iic_scan) { + printk(KERN_INFO " i2c-algo-iic.o: scanning bus %s.\n", + adap->name); + } + return 0; +} + + +// +// Done +// +int i2c_iic_del_bus(struct i2c_adapter *adap) +{ + int res; + if ((res = i2c_del_adapter(adap)) < 0) + return res; + DEB2(printk(KERN_DEBUG "i2c-algo-iic.o: adapter unregistered: %s\n",adap->name)); + +#ifdef MODULE + MOD_DEC_USE_COUNT; +#endif + return 0; +} + + +// +// Done +// +int __init i2c_algo_iic_init (void) +{ + printk(KERN_INFO "IBM On-chip iic (i2c) algorithm module 2002.27.03\n"); + return 0; +} + + +void i2c_algo_iic_exit(void) +{ + return; +} + + +EXPORT_SYMBOL(i2c_iic_add_bus); +EXPORT_SYMBOL(i2c_iic_del_bus); + +// +// The MODULE_* macros resolve to nothing if MODULES is not defined +// when this file is compiled. +// +MODULE_AUTHOR("MontaVista Software "); +MODULE_DESCRIPTION("PPC 405 iic algorithm"); + +MODULE_PARM(iic_test, "i"); +MODULE_PARM(iic_scan, "i"); +MODULE_PARM(i2c_debug,"i"); + +MODULE_PARM_DESC(iic_test, "Test if the I2C bus is available"); +MODULE_PARM_DESC(iic_scan, "Scan for active chips on the bus"); +MODULE_PARM_DESC(i2c_debug, + "debug level - 0 off; 1 normal; 2,3 more verbose; 9 iic-protocol"); + + +module_init(i2c_algo_iic_init); +module_exit(i2c_algo_iic_exit); --- /dev/null 1994-07-17 19:46:18.000000000 -0400 +++ linux/drivers/i2c/i2c-algo-ibm_ocp.h 2002-07-03 21:00:38.000000000 -0400 @@ -0,0 +1,55 @@ +/* ------------------------------------------------------------------------- */ +/* i2c-algo-ibm_ocp.h i2c driver algorithms for IBM PPC 405 IIC adapters */ +/* ------------------------------------------------------------------------- */ +/* Copyright (C) 1995-97 Simon G. Vogl + 1998-99 Hans Berglund + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +/* ------------------------------------------------------------------------- */ + +/* With some changes from Ky?sti M?lkki and even + Frodo Looijaard */ + +/* Modifications by MontaVista Software, August 2000 + Changes made to support the IIC peripheral on the IBM PPC 405 */ + +#ifndef I2C_ALGO_IIC_H +#define I2C_ALGO_IIC_H 1 + +/* --- Defines for pcf-adapters --------------------------------------- */ +#include + +struct i2c_algo_iic_data { + struct iic_regs *data; /* private data for lolevel routines */ + void (*setiic) (void *data, int ctl, int val); + int (*getiic) (void *data, int ctl); + int (*getown) (void *data); + int (*getclock) (void *data); + void (*waitforpin) (void *data); + + /* local settings */ + int udelay; + int mdelay; + int timeout; +}; + + +#define I2C_IIC_ADAP_MAX 16 + + +int i2c_iic_add_bus(struct i2c_adapter *); +int i2c_iic_del_bus(struct i2c_adapter *); + +#endif /* I2C_ALGO_IIC_H */ --- linux-2.5.26/drivers/i2c/i2c-elektor.c.orig 2002-07-05 19:42:02.000000000 -0400 +++ linux/drivers/i2c/i2c-elektor.c 2002-08-07 22:39:08.000000000 -0400 @@ -55,12 +55,9 @@ in some functions, called from the algo-pcf module. Sometimes it's need to be rewriten - but for now just remove this for simpler reading */ -#if (LINUX_VERSION_CODE < 0x020301) -static struct wait_queue *pcf_wait = NULL; -#else static wait_queue_head_t pcf_wait; -#endif static int pcf_pending; +spinlock_t irq_driver_lock = SPIN_LOCK_UNLOCKED; /* ----- global defines ----------------------------------------------- */ #define DEB(x) if (i2c_debug>=1) x @@ -121,12 +118,12 @@ int timeout = 2; if (irq > 0) { - cli(); + spin_lock_irq(&irq_driver_lock); if (pcf_pending == 0) { interruptible_sleep_on_timeout(&pcf_wait, timeout*HZ ); } else pcf_pending = 0; - sti(); + spin_unlock_irq(&irq_driver_lock); } else { udelay(100); } @@ -280,9 +277,7 @@ base = DEFAULT_BASE; } -#if (LINUX_VERSION_CODE >= 0x020301) init_waitqueue_head(&pcf_wait); -#endif if (pcf_isa_init() == 0) { if (i2c_pcf_add_bus(&pcf_isa_ops) < 0) { pcf_isa_exit(); @@ -297,6 +292,7 @@ return 0; } +EXPORT_NO_SYMBOLS; #ifdef MODULE MODULE_AUTHOR("Hans Berglund "); --- /dev/null 1994-07-17 19:46:18.000000000 -0400 +++ linux/drivers/i2c/i2c-frodo.c 2002-07-09 08:39:21.000000000 -0400 @@ -0,0 +1,118 @@ + +/* + * linux/drivers/i2c/i2c-frodo.c + * + * Author: Abraham van der Merwe + * + * An I2C adapter driver for the 2d3D, Inc. StrongARM SA-1110 + * Development board (Frodo). + * + * This source code is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * version 2 as published by the Free Software Foundation. + */ + +#include +#include +#include + +#include +#include +#include + +#include + +#include +#include + +static void frodo_setsda (void *data,int state) +{ + if (state) + FRODO_CPLD_I2C |= FRODO_I2C_SDA_OUT; + else + FRODO_CPLD_I2C &= ~FRODO_I2C_SDA_OUT; +} + +static void frodo_setscl (void *data,int state) +{ + if (state) + FRODO_CPLD_I2C |= FRODO_I2C_SCL_OUT; + else + FRODO_CPLD_I2C &= ~FRODO_I2C_SCL_OUT; +} + +static int frodo_getsda (void *data) +{ + return ((FRODO_CPLD_I2C & FRODO_I2C_SDA_IN) != 0); +} + +static int frodo_getscl (void *data) +{ + return ((FRODO_CPLD_I2C & FRODO_I2C_SCL_IN) != 0); +} + +static struct i2c_algo_bit_data bit_frodo_data = { + setsda: frodo_setsda, + setscl: frodo_setscl, + getsda: frodo_getsda, + getscl: frodo_getscl, + udelay: 80, + mdelay: 80, + timeout: 100 +}; + +static int frodo_client_register (struct i2c_client *client) +{ + return (0); +} + +static int frodo_client_unregister (struct i2c_client *client) +{ + return (0); +} + +static void frodo_inc_use (struct i2c_adapter *adapter) +{ + MOD_INC_USE_COUNT; +} + +static void frodo_dec_use (struct i2c_adapter *adapter) +{ + MOD_DEC_USE_COUNT; +} + +static struct i2c_adapter frodo_ops = { + name: "Frodo adapter driver", + id: I2C_HW_B_FRODO, + algo: NULL, + algo_data: &bit_frodo_data, + inc_use: frodo_inc_use, + dec_use: frodo_dec_use, + client_register: frodo_client_register, + client_unregister: frodo_client_unregister +}; + +static int __init i2c_frodo_init (void) +{ + return (i2c_bit_add_bus (&frodo_ops)); +} + +EXPORT_NO_SYMBOLS; + +static void __exit i2c_frodo_exit (void) +{ + i2c_bit_del_bus (&frodo_ops); +} + +MODULE_AUTHOR ("Abraham van der Merwe "); +MODULE_DESCRIPTION ("I2C-Bus adapter routines for Frodo"); + +#ifdef MODULE_LICENSE +MODULE_LICENSE ("GPL"); +#endif /* #ifdef MODULE_LICENSE */ + +EXPORT_NO_SYMBOLS; + +module_init (i2c_frodo_init); +module_exit (i2c_frodo_exit); + --- /dev/null 1994-07-17 19:46:18.000000000 -0400 +++ linux/drivers/i2c/i2c-rpx.c 2002-06-11 22:29:54.000000000 -0400 @@ -0,0 +1,136 @@ +/* + * Embedded Planet RPX Lite MPC8xx CPM I2C interface. + * Copyright (c) 1999 Dan Malek (dmalek@jlc.net). + * + * moved into proper i2c interface; + * Brad Parker (brad@heeltoe.com) + * + * RPX lite specific parts of the i2c interface + * Update: There actually isn't anything RPXLite-specific about this module. + * This should work for most any 8xx board. The console messages have been + * changed to eliminate RPXLite references. + */ + +#include +#include +#include +#include +#include +#include + +#include +#include + +#include +#include + +static void +rpx_iic_init(struct i2c_algo_8xx_data *data) +{ + volatile cpm8xx_t *cp; + volatile immap_t *immap; + + cp = cpmp; /* Get pointer to Communication Processor */ + immap = (immap_t *)IMAP_ADDR; /* and to internal registers */ + + data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC]; + + /* Check for and use a microcode relocation patch. + */ + if ((data->reloc = data->iip->iic_rpbase)) + data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase]; + + data->i2c = (i2c8xx_t *)&(immap->im_i2c); + data->cp = cp; + + /* Initialize Port B IIC pins. + */ + cp->cp_pbpar |= 0x00000030; + cp->cp_pbdir |= 0x00000030; + cp->cp_pbodr |= 0x00000030; + + /* Allocate space for two transmit and two receive buffer + * descriptors in the DP ram. + */ + data->dp_addr = m8xx_cpm_dpalloc(sizeof(cbd_t) * 4); + + /* ptr to i2c area */ + data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c); +} + +static int rpx_install_isr(int irq, void (*func)(void *, void *), void *data) +{ + /* install interrupt handler */ + cpm_install_handler(irq, (void (*)(void *, struct pt_regs *)) func, data); + + return 0; +} + +static int rpx_reg(struct i2c_client *client) +{ + return 0; +} + +static int rpx_unreg(struct i2c_client *client) +{ + return 0; +} + +static void rpx_inc_use(struct i2c_adapter *adap) +{ +#ifdef MODULE + MOD_INC_USE_COUNT; +#endif +} + +static void rpx_dec_use(struct i2c_adapter *adap) +{ +#ifdef MODULE + MOD_DEC_USE_COUNT; +#endif +} + +static struct i2c_algo_8xx_data rpx_data = { + setisr: rpx_install_isr +}; + + +static struct i2c_adapter rpx_ops = { + "m8xx", + I2C_HW_MPC8XX_EPON, + NULL, + &rpx_data, + rpx_inc_use, + rpx_dec_use, + rpx_reg, + rpx_unreg, +}; + +int __init i2c_rpx_init(void) +{ + printk("i2c-rpx.o: i2c MPC8xx module version %s (%s)\n", I2C_VERSION, I2C_DATE); + + /* reset hardware to sane state */ + rpx_iic_init(&rpx_data); + + if (i2c_8xx_add_bus(&rpx_ops) < 0) { + printk("i2c-rpx: Unable to register with I2C\n"); + return -ENODEV; + } + + return 0; +} + +void __exit i2c_rpx_exit(void) +{ + i2c_8xx_del_bus(&rpx_ops); +} + +#ifdef MODULE +MODULE_AUTHOR("Dan Malek "); +MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards"); + +module_init(i2c_rpx_init); +module_exit(i2c_rpx_exit); +#endif + -- Albert Cranford Deerfield Beach FL USA ac9410@bellsouth.net - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/