Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760175Ab2EIQNZ (ORCPT ); Wed, 9 May 2012 12:13:25 -0400 Received: from mailout4.samsung.com ([203.254.224.34]:57583 "EHLO mailout4.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751644Ab2EIQNU (ORCPT ); Wed, 9 May 2012 12:13:20 -0400 X-AuditID: cbfee61b-b7c60ae000000c58-10-4faa979e9feb From: Yadwinder Singh To: linux-kernel@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, linux-samsung-soc@vger.kernel.org, Yadwinder Singh Brar Subject: [PATCH 2/2] regulator: Add support for MAX77686. Date: Wed, 09 May 2012 21:54:55 +0530 Message-id: <1336580695-1184-3-git-send-email-yadi.brar@samsung.com> X-Mailer: git-send-email 1.6.6.rc2 In-reply-to: <1336580695-1184-1-git-send-email-yadi.brar@samsung.com> References: <1336580695-1184-1-git-send-email-yadi.brar@samsung.com> X-Brightmail-Tracker: AAAAAA== X-TM-AS-MML: No Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 19852 Lines: 721 From: Yadwinder Singh Brar Add support for PMIC/regulator portion of MAX77686 multifunction device. MAX77686 provides LDOs[1-26] and BUCKs[1-9]. This is initial release of driver which supports setting and getting the voltage of a regulator with I2C interface. Signed-off-by: Yadwinder Singh Brar --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/max77686.c | 660 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 670 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/max77686.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 36db5a4..67162cc 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -195,6 +195,15 @@ config REGULATOR_MAX8998 via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX77686 + tristate "Maxim 77686 regulator" + depends on MFD_MAX77686 + help + This driver controls a Maxim 77686 voltage regulator via I2C + bus. The provided regulator is suitable for Exynos5 chips to + control VDD_ARM and VDD_INT voltages.It supports LDOs[1-26] + and BUCKs[1-9]. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 94b5274..008931b 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o +obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c new file mode 100644 index 0000000..4aa9722 --- /dev/null +++ b/drivers/regulator/max77686.c @@ -0,0 +1,660 @@ +/* + * max77686.c - Regulator driver for the Maxim 77686 + * + * Copyright (C) 2012 Samsung Electronics + * Chiwoong Byun + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This driver is based on max8997.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct max77686_data { + struct device *dev; + struct max77686_dev *iodev; + int num_regulators; + struct regulator_dev **rdev; + int ramp_delay; /* index of ramp_delay */ + + /*GPIO-DVS feature is not enabled with the + *current version of MAX77686 driver.*/ +}; + +struct voltage_map_desc { + int min; + int max; + int step; + unsigned int n_bits; +}; + +/* Voltage maps in mV */ +static const struct voltage_map_desc ldo_voltage_map_desc = { + .min = 800, .max = 3950, .step = 50, .n_bits = 6, +}; /* LDO3 ~ 5, 9 ~ 14, 16 ~ 26 */ + +static const struct voltage_map_desc ldo_low_voltage_map_desc = { + .min = 800, .max = 2375, .step = 25, .n_bits = 6, +}; /* LDO1 ~ 2, 6 ~ 8, 15 */ + +static const struct voltage_map_desc buck_dvs_voltage_map_desc = { + .min = 600000, .max = 3787500, .step = 12500, .n_bits = 8, +}; /* Buck2, 3, 4 (uV) */ + +static const struct voltage_map_desc buck_voltage_map_desc = { + .min = 750, .max = 3900, .step = 50, .n_bits = 6, +}; /* Buck1, 5 ~ 9 */ + +static const struct voltage_map_desc *reg_voltage_map[] = { + [MAX77686_LDO1] = &ldo_low_voltage_map_desc, + [MAX77686_LDO2] = &ldo_low_voltage_map_desc, + [MAX77686_LDO3] = &ldo_voltage_map_desc, + [MAX77686_LDO4] = &ldo_voltage_map_desc, + [MAX77686_LDO5] = &ldo_voltage_map_desc, + [MAX77686_LDO6] = &ldo_low_voltage_map_desc, + [MAX77686_LDO7] = &ldo_low_voltage_map_desc, + [MAX77686_LDO8] = &ldo_low_voltage_map_desc, + [MAX77686_LDO9] = &ldo_voltage_map_desc, + [MAX77686_LDO10] = &ldo_voltage_map_desc, + [MAX77686_LDO11] = &ldo_voltage_map_desc, + [MAX77686_LDO12] = &ldo_voltage_map_desc, + [MAX77686_LDO13] = &ldo_voltage_map_desc, + [MAX77686_LDO14] = &ldo_voltage_map_desc, + [MAX77686_LDO15] = &ldo_low_voltage_map_desc, + [MAX77686_LDO16] = &ldo_voltage_map_desc, + [MAX77686_LDO17] = &ldo_voltage_map_desc, + [MAX77686_LDO18] = &ldo_voltage_map_desc, + [MAX77686_LDO19] = &ldo_voltage_map_desc, + [MAX77686_LDO20] = &ldo_voltage_map_desc, + [MAX77686_LDO21] = &ldo_voltage_map_desc, + [MAX77686_LDO22] = &ldo_voltage_map_desc, + [MAX77686_LDO23] = &ldo_voltage_map_desc, + [MAX77686_LDO24] = &ldo_voltage_map_desc, + [MAX77686_LDO25] = &ldo_voltage_map_desc, + [MAX77686_LDO26] = &ldo_voltage_map_desc, + [MAX77686_BUCK1] = &buck_voltage_map_desc, + [MAX77686_BUCK2] = &buck_dvs_voltage_map_desc, + [MAX77686_BUCK3] = &buck_dvs_voltage_map_desc, + [MAX77686_BUCK4] = &buck_dvs_voltage_map_desc, + [MAX77686_BUCK5] = &buck_voltage_map_desc, + [MAX77686_BUCK6] = &buck_voltage_map_desc, + [MAX77686_BUCK7] = &buck_voltage_map_desc, + [MAX77686_BUCK8] = &buck_voltage_map_desc, + [MAX77686_BUCK9] = &buck_voltage_map_desc, + [MAX77686_EN32KHZ_AP] = NULL, + [MAX77686_EN32KHZ_CP] = NULL, +}; + +static int max77686_get_voltage_unit(int rid) +{ + int unit = 0; + + switch (rid) { + case MAX77686_BUCK2...MAX77686_BUCK4: + unit = 1; /* BUCK2,3,4 is uV */ + break; + default: + unit = 1000; + break; + } + + return unit; +} + +static int max77686_list_voltage(struct regulator_dev *rdev, + unsigned int selector) +{ + const struct voltage_map_desc *desc; + int rid = rdev_get_id(rdev); + int val; + + if (rid >= ARRAY_SIZE(reg_voltage_map) || rid < 0) + return -EINVAL; + + desc = reg_voltage_map[rid]; + if (desc == NULL) + return -EINVAL; + + val = desc->min + desc->step * selector; + if (val > desc->max) + return -EINVAL; + + return val * max77686_get_voltage_unit(rid); +} + +static int max77686_get_enable_register(struct regulator_dev *rdev, + int *reg, int *mask, int *pattern) +{ + int rid = rdev_get_id(rdev); + + switch (rid) { + case MAX77686_LDO1...MAX77686_LDO26: + *reg = MAX77686_REG_LDO1CTRL1 + (rid - MAX77686_LDO1); + *mask = 0xC0; + *pattern = 0xC0; + break; + case MAX77686_BUCK1: + *reg = MAX77686_REG_BUCK1CTRL; + *mask = 0x03; + *pattern = 0x03; + break; + case MAX77686_BUCK2: + *reg = MAX77686_REG_BUCK2CTRL1; + *mask = 0x30; + *pattern = 0x10; + break; + case MAX77686_BUCK3: + *reg = MAX77686_REG_BUCK3CTRL1; + *mask = 0x30; + *pattern = 0x10; + break; + case MAX77686_BUCK4: + *reg = MAX77686_REG_BUCK4CTRL1; + *mask = 0x30; + *pattern = 0x10; + break; + case MAX77686_BUCK5...MAX77686_BUCK9: + *reg = MAX77686_REG_BUCK5CTRL + (rid - MAX77686_BUCK5) * 2; + *mask = 0x03; + *pattern = 0x03; + break; + case MAX77686_EN32KHZ_AP...MAX77686_EN32KHZ_CP: + *reg = MAX77686_REG_32KHZ_; + *mask = 0x01 << (rid - MAX77686_EN32KHZ_AP); + *pattern = 0x01 << (rid - MAX77686_EN32KHZ_AP); + break; + default: + /* Not controllable or not exists */ + return -EINVAL; + } + + return 0; +} + +static int max77686_reg_is_enabled(struct regulator_dev *rdev) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max77686->iodev->i2c; + int ret, reg, mask, pattern; + u8 val; + + ret = max77686_get_enable_register(rdev, ®, &mask, &pattern); + if (ret) + return ret; + + ret = max77686_read_reg(i2c, reg, &val); + if (ret) + return ret; + + return (val & mask) == pattern; +} + +static int max77686_reg_enable(struct regulator_dev *rdev) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max77686->iodev->i2c; + int ret, reg, mask, pattern; + + ret = max77686_get_enable_register(rdev, ®, &mask, &pattern); + if (ret) + return ret; + + return max77686_update_reg(i2c, reg, pattern, mask); +} + +static int max77686_reg_disable(struct regulator_dev *rdev) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max77686->iodev->i2c; + int ret, reg, mask, pattern; + + ret = max77686_get_enable_register(rdev, ®, &mask, &pattern); + if (ret) + return ret; + + return max77686_update_reg(i2c, reg, ~mask, mask); +} + +static int max77686_get_voltage_register(struct regulator_dev *rdev, + int *_reg, int *_shift, int *_mask) +{ + int rid = rdev_get_id(rdev); + int reg, shift = 0, mask = 0x3f; + + switch (rid) { + case MAX77686_LDO1...MAX77686_LDO26: + reg = MAX77686_REG_LDO1CTRL1 + (rid - MAX77686_LDO1); + break; + case MAX77686_BUCK1: + reg = MAX77686_REG_BUCK1OUT; + break; + case MAX77686_BUCK2: + reg = MAX77686_REG_BUCK2DVS1; + mask = 0xff; + break; + case MAX77686_BUCK3: + reg = MAX77686_REG_BUCK3DVS1; + mask = 0xff; + break; + case MAX77686_BUCK4: + reg = MAX77686_REG_BUCK4DVS1; + mask = 0xff; + break; + case MAX77686_BUCK5...MAX77686_BUCK9: + reg = MAX77686_REG_BUCK5OUT + (rid - MAX77686_BUCK5) * 2; + break; + default: + return -EINVAL; + } + + *_reg = reg; + *_shift = shift; + *_mask = mask; + + return 0; +} + +static int max77686_get_voltage(struct regulator_dev *rdev) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max77686->iodev->i2c; + int reg, shift, mask, ret; + u8 val; + + ret = max77686_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + ret = max77686_read_reg(i2c, reg, &val); + if (ret) + return ret; + + val >>= shift; + val &= mask; + + return max77686_list_voltage(rdev, val); +} + +static inline int max77686_get_voltage_proper_val(const struct voltage_map_desc + *desc, int min_vol, + int max_vol) +{ + int i = 0; + + if (desc == NULL) + return -EINVAL; + + if (max_vol < desc->min || min_vol > desc->max) + return -EINVAL; + + while (desc->min + desc->step * i < min_vol && + desc->min + desc->step * i < desc->max) + i++; + + if (desc->min + desc->step * i > max_vol) + return -EINVAL; + + if (i >= (1 << desc->n_bits)) + return -EINVAL; + + return i; +} + +static int max77686_set_voltage(struct regulator_dev *rdev, + int min_uV, int max_uV, unsigned *selector) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + struct i2c_client *i2c = max77686->iodev->i2c; + int min_vol = min_uV, max_vol = max_uV, unit = 0; + const struct voltage_map_desc *desc; + int rid = rdev_get_id(rdev); + int reg, shift = 0, mask, ret; + int i; + int ramp[] = {13, 27, 57, 100}; /* ramp_rate in mV/uS */ + u8 org; + + unit = max77686_get_voltage_unit(rid); + min_vol /= unit; + max_vol /= unit; + + desc = reg_voltage_map[rid]; + + i = max77686_get_voltage_proper_val(desc, min_vol, max_vol); + if (i < 0) + return i; + + ret = max77686_get_voltage_register(rdev, ®, &shift, &mask); + if (ret) + return ret; + + max77686_read_reg(i2c, reg, &org); + org = (org & mask) >> shift; + + ret = max77686_update_reg(i2c, reg, i << shift, mask << shift); + *selector = i; + + if (rid == MAX77686_BUCK2 || rid == MAX77686_BUCK3 || + rid == MAX77686_BUCK4) { + /* If the voltage is increasing */ + if (org < i) + udelay(DIV_ROUND_UP(desc->step * (i - org), + ramp[max77686->ramp_delay])); + } + + return ret; +} + +static struct regulator_ops max77686_ops = { + .list_voltage = max77686_list_voltage, + .is_enabled = max77686_reg_is_enabled, + .enable = max77686_reg_enable, + .disable = max77686_reg_disable, + .get_voltage = max77686_get_voltage, + .set_voltage = max77686_set_voltage, + .set_suspend_enable = max77686_reg_enable, + .set_suspend_disable = max77686_reg_disable, +}; + +static struct regulator_ops max77686_fixedvolt_ops = { + .list_voltage = max77686_list_voltage, + .is_enabled = max77686_reg_is_enabled, + .enable = max77686_reg_enable, + .disable = max77686_reg_disable, + .set_suspend_enable = max77686_reg_enable, + .set_suspend_disable = max77686_reg_disable, +}; + +#define regulator_desc_ldo(num) { \ + .name = "LDO"#num, \ + .id = MAX77686_LDO##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ +} +#define regulator_desc_buck(num) { \ + .name = "BUCK"#num, \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ +} + +static struct regulator_desc regulators[] = { + regulator_desc_ldo(1), + regulator_desc_ldo(2), + regulator_desc_ldo(3), + regulator_desc_ldo(4), + regulator_desc_ldo(5), + regulator_desc_ldo(6), + regulator_desc_ldo(7), + regulator_desc_ldo(8), + regulator_desc_ldo(9), + regulator_desc_ldo(10), + regulator_desc_ldo(11), + regulator_desc_ldo(12), + regulator_desc_ldo(13), + regulator_desc_ldo(14), + regulator_desc_ldo(15), + regulator_desc_ldo(16), + regulator_desc_ldo(17), + regulator_desc_ldo(18), + regulator_desc_ldo(19), + regulator_desc_ldo(20), + regulator_desc_ldo(21), + regulator_desc_ldo(22), + regulator_desc_ldo(23), + regulator_desc_ldo(24), + regulator_desc_ldo(25), + regulator_desc_ldo(26), + regulator_desc_buck(1), + regulator_desc_buck(2), + regulator_desc_buck(3), + regulator_desc_buck(4), + regulator_desc_buck(5), + regulator_desc_buck(6), + regulator_desc_buck(7), + regulator_desc_buck(8), + regulator_desc_buck(9), + { + .name = "EN32KHz_AP", + .id = MAX77686_EN32KHZ_AP, + .ops = &max77686_fixedvolt_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, { + .name = "EN32KHz_CP", + .id = MAX77686_EN32KHZ_CP, + .ops = &max77686_fixedvolt_ops, + .type = REGULATOR_VOLTAGE, + .owner = THIS_MODULE, + }, +}; + +#ifdef CONFIG_OF +static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev, + struct max77686_platform_data *pdata) +{ + struct device_node *pmic_np, *regulators_np, *reg_np; + struct max77686_regulator_data *rdata; + unsigned int i; + + pmic_np = iodev->dev->of_node; + if (!pmic_np) { + dev_err(iodev->dev, "could not find pmic sub-node\n"); + return -ENODEV; + } + + regulators_np = of_find_node_by_name(pmic_np, "voltage-regulators"); + if (!regulators_np) { + dev_err(iodev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + +/* count the number of regulators to be supported in pmic */ + pdata->num_regulators = 0; + for_each_child_of_node(regulators_np, reg_np) + pdata->num_regulators++; + + rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) * + pdata->num_regulators, GFP_KERNEL); + if (!rdata) { + dev_err(iodev->dev, + "could not allocate memory for regulator data\n"); + return -ENOMEM; + } + + pdata->regulators = rdata; + for_each_child_of_node(regulators_np, reg_np) { + for (i = 0; i < ARRAY_SIZE(regulators); i++) + if (!of_node_cmp(reg_np->name, regulators[i].name)) + break; + + if (i == ARRAY_SIZE(regulators)) { + dev_warn(iodev->dev, + "No configuration data for regulator %s\n", + reg_np->name); + continue; + } + + rdata->id = i; + rdata->initdata = of_get_regulator_init_data( + iodev->dev, reg_np); + rdata->reg_node = reg_np; + rdata++; + } + + if (of_property_read_u32(pmic_np, + "max77686,buck_ramp_delay", &i)) + pdata->ramp_delay = i & 0xff; + + return 0; +} +#else +static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev, + struct max77686_platform_data *pdata) +{ + return 0; +} +#endif /* CONFIG_OF */ + +#define RAMP_VALUE (max77686->ramp_delay << 6) + +static __devinit int max77686_pmic_probe(struct platform_device *pdev) +{ + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max77686_platform_data *pdata = iodev->pdata; + struct regulator_dev **rdev; + struct max77686_data *max77686; + struct i2c_client *i2c = iodev->i2c; + int i, ret, size; + + if (iodev->dev->of_node) { + ret = max77686_pmic_dt_parse_pdata(iodev, pdata); + if (ret) + return ret; + } + + if (!pdata) { + dev_err(&pdev->dev, "platform data not found\n"); + return -ENODEV; + } + + max77686 = kzalloc(sizeof(struct max77686_data), GFP_KERNEL); + if (!max77686) + return -ENOMEM; + + size = sizeof(struct regulator_dev *) * pdata->num_regulators; + max77686->rdev = kzalloc(size, GFP_KERNEL); + if (!max77686->rdev) { + kfree(max77686); + return -ENOMEM; + } + + rdev = max77686->rdev; + + max77686->dev = &pdev->dev; + max77686->iodev = iodev; + max77686->num_regulators = pdata->num_regulators; + + if (pdata->ramp_delay) { + max77686->ramp_delay = pdata->ramp_delay; + max77686_update_reg(i2c, MAX77686_REG_BUCK2CTRL1, + RAMP_VALUE, RAMP_MASK); + max77686_update_reg(i2c, MAX77686_REG_BUCK3CTRL1, + RAMP_VALUE, RAMP_MASK); + max77686_update_reg(i2c, MAX77686_REG_BUCK4CTRL1, + RAMP_VALUE, RAMP_MASK); + } else { + /* Default/Reset value is 27.5 mV/uS */ + max77686->ramp_delay = MAX77686_RAMP_RATE_27MV; + } + + platform_set_drvdata(pdev, max77686); + + for (i = 0; i < pdata->num_regulators; i++) { + const struct voltage_map_desc *desc; + int id = pdata->regulators[i].id; + + desc = reg_voltage_map[id]; + if (desc) + regulators[id].n_voltages = + (desc->max - desc->min) / desc->step + 1; + + rdev[i] = regulator_register(®ulators[id], max77686->dev, + pdata->regulators[i].initdata, + max77686, NULL); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(max77686->dev, + "regulator init failed for id : %d\n", id); + rdev[i] = NULL; + goto err; + } + } + + return 0; + err: + for (i = 0; i < max77686->num_regulators; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + + kfree(max77686->rdev); + kfree(max77686); + + return ret; +} + +static int __devexit max77686_pmic_remove(struct platform_device *pdev) +{ + struct max77686_data *max77686 = platform_get_drvdata(pdev); + struct regulator_dev **rdev = max77686->rdev; + int i; + + for (i = 0; i < max77686->num_regulators; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + + kfree(max77686->rdev); + kfree(max77686); + + return 0; +} + +static const struct platform_device_id max77686_pmic_id[] = { + {"max77686-pmic", 0}, + {}, +}; + +MODULE_DEVICE_TABLE(platform, max77686_pmic_id); + +static struct platform_driver max77686_pmic_driver = { + .driver = { + .name = "max77686-pmic", + .owner = THIS_MODULE, + }, + .probe = max77686_pmic_probe, + .remove = __devexit_p(max77686_pmic_remove), + .id_table = max77686_pmic_id, +}; + +static int __init max77686_pmic_init(void) +{ + return platform_driver_register(&max77686_pmic_driver); +} + +subsys_initcall(max77686_pmic_init); + +static void __exit max77686_pmic_cleanup(void) +{ + platform_driver_unregister(&max77686_pmic_driver); +} + +module_exit(max77686_pmic_cleanup); + +MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver"); +MODULE_AUTHOR("Chiwoong Byun "); +MODULE_LICENSE("GPL"); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/