Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1761252Ab2EJSaH (ORCPT ); Thu, 10 May 2012 14:30:07 -0400 Received: from mail-lb0-f174.google.com ([209.85.217.174]:51693 "EHLO mail-lb0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760633Ab2EJSaD (ORCPT ); Thu, 10 May 2012 14:30:03 -0400 From: Johan Hovold To: Richard Purdie Cc: Rob Landley , Samuel Ortiz , Jonathan Cameron , Greg Kroah-Hartman , Florian Tobias Schandinat , Arnd Bergmann , Andrew Morton , Mark Brown , linux-doc@vger.kernel.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, Johan Hovold Subject: [PATCH v3] backlight: add LM3533 backlight driver Date: Thu, 10 May 2012 20:29:28 +0200 Message-Id: <1336674568-24319-1-git-send-email-jhovold@gmail.com> X-Mailer: git-send-email 1.7.8.5 In-Reply-To: <1336040799-18433-5-git-send-email-jhovold@gmail.com> References: <1336040799-18433-5-git-send-email-jhovold@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13531 Lines: 543 Add sub-driver for the backlights on National Semiconductor / TI LM3533 lighting power chips. The chip provides 256 brightness levels and ambient-light-sensor and pwm input control. Signed-off-by: Johan Hovold --- v2 - add sysfs-ABI documentation - open code max_current/pwm macros v3 - remove max_current attribute .../testing/sysfs-class-backlight-driver-lm3533 | 41 ++ drivers/video/backlight/Kconfig | 12 + drivers/video/backlight/Makefile | 1 + drivers/video/backlight/lm3533_bl.c | 423 ++++++++++++++++++++ 4 files changed, 477 insertions(+), 0 deletions(-) create mode 100644 Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 create mode 100644 drivers/video/backlight/lm3533_bl.c diff --git a/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 new file mode 100644 index 0000000..9fda257 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-backlight-driver-lm3533 @@ -0,0 +1,41 @@ +What: /sys/class/backlight//als +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold +Description: + Set the ALS-control mode (0,..2), where + + 0 - disabled + 1 - ALS-mapper 1 (backlight 0) + 2 - ALS-mapper 2 (backlight 1) + +What: /sys/class/backlight//id +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold +Description: + Get the id of this backlight (0, 1). + +What: /sys/class/backlight//linear +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold +Description: + Set the brightness-mapping mode (0, 1), where + + 0 - exponential mode + 1 - linear mode + +What: /sys/class/backlight//pwm +Date: April 2012 +KernelVersion: 3.5 +Contact: Johan Hovold +Description: + Set the PWM-input control mask (5 bits), where + + bit 5 - PWM-input enabled in Zone 4 + bit 4 - PWM-input enabled in Zone 3 + bit 3 - PWM-input enabled in Zone 2 + bit 2 - PWM-input enabled in Zone 1 + bit 1 - PWM-input enabled in Zone 0 + bit 0 - PWM-input enabled diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig index af16884..fa2b037 100644 --- a/drivers/video/backlight/Kconfig +++ b/drivers/video/backlight/Kconfig @@ -184,6 +184,18 @@ config BACKLIGHT_GENERIC known as the Corgi backlight driver. If you have a Sharp Zaurus SL-C7xx, SL-Cxx00 or SL-6000x say y. +config BACKLIGHT_LM3533 + tristate "Backlight Driver for LM3533" + depends on BACKLIGHT_CLASS_DEVICE + depends on MFD_LM3533 + help + Say Y to enable the backlight driver for National Semiconductor / TI + LM3533 Lighting Power chips. + + The backlights can be controlled directly, through PWM input, or by + the ambient-light-sensor interface. The chip supports 256 brightness + levels. + config BACKLIGHT_LOCOMO tristate "Sharp LOCOMO LCD/Backlight Driver" depends on SHARP_LOCOMO diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile index 36855ae..a2ac9cf 100644 --- a/drivers/video/backlight/Makefile +++ b/drivers/video/backlight/Makefile @@ -21,6 +21,7 @@ obj-$(CONFIG_BACKLIGHT_EP93XX) += ep93xx_bl.o obj-$(CONFIG_BACKLIGHT_GENERIC) += generic_bl.o obj-$(CONFIG_BACKLIGHT_HP700) += jornada720_bl.o obj-$(CONFIG_BACKLIGHT_HP680) += hp680_bl.o +obj-$(CONFIG_BACKLIGHT_LM3533) += lm3533_bl.o obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomolcd.o obj-$(CONFIG_BACKLIGHT_LP855X) += lp855x_bl.o obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o diff --git a/drivers/video/backlight/lm3533_bl.c b/drivers/video/backlight/lm3533_bl.c new file mode 100644 index 0000000..5abca65 --- /dev/null +++ b/drivers/video/backlight/lm3533_bl.c @@ -0,0 +1,423 @@ +/* + * lm3533-bl.c -- LM3533 Backlight driver + * + * Copyright (C) 2011-2012 Texas Instruments + * + * Author: Johan Hovold + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include +#include +#include +#include +#include +#include + +#include + + +#define LM3533_HVCTRLBANK_COUNT 2 +#define LM3533_BL_MAX_BRIGHTNESS 255 + +#define LM3533_REG_CTRLBANK_AB_BCONF 0x1a + + +struct lm3533_bl { + struct lm3533 *lm3533; + struct lm3533_ctrlbank cb; + struct backlight_device *bd; + int id; +}; + + +static inline int lm3533_bl_get_ctrlbank_id(struct lm3533_bl *bl) +{ + return bl->id; +} + +static int lm3533_bl_update_status(struct backlight_device *bd) +{ + struct lm3533_bl *bl = bl_get_data(bd); + int brightness = bd->props.brightness; + + if (bd->props.power != FB_BLANK_UNBLANK) + brightness = 0; + if (bd->props.fb_blank != FB_BLANK_UNBLANK) + brightness = 0; + + return lm3533_ctrlbank_set_brightness(&bl->cb, (u8)brightness); +} + +static int lm3533_bl_get_brightness(struct backlight_device *bd) +{ + struct lm3533_bl *bl = bl_get_data(bd); + u8 val; + int ret; + + ret = lm3533_ctrlbank_get_brightness(&bl->cb, &val); + if (ret) + return ret; + + return val; +} + +static const struct backlight_ops lm3533_bl_ops = { + .get_brightness = lm3533_bl_get_brightness, + .update_status = lm3533_bl_update_status, +}; + +static ssize_t show_id(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + + return scnprintf(buf, PAGE_SIZE, "%d\n", bl->id); +} + +/* + * ALS-control setting: + * + * 0 - ALS disabled + * 1 - ALS-mapper 1 (backlight 0) + * 2 - ALS-mapper 2 (backlight 1) + */ +static ssize_t show_als(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + int ctrlbank = lm3533_bl_get_ctrlbank_id(bl); + u8 val; + u8 mask; + int als; + int ret; + + ret = lm3533_read(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, &val); + if (ret) + return ret; + + mask = 2 * ctrlbank; + als = val & mask; + if (als) + als = ctrlbank + 1; + + return scnprintf(buf, PAGE_SIZE, "%d\n", als); +} + +static ssize_t store_als(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + int ctrlbank = lm3533_bl_get_ctrlbank_id(bl); + int als; + u8 val; + u8 mask; + int ret; + + if (kstrtoint(buf, 0, &als)) + return -EINVAL; + + if (als != 0 && (als != ctrlbank + 1)) + return -EINVAL; + + mask = 1 << (2 * ctrlbank); + + if (als) + val = mask; + else + val = 0; + + ret = lm3533_update(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, val, + mask); + if (ret) + return ret; + + return len; +} + +static ssize_t show_linear(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + u8 val; + u8 mask; + int linear; + int ret; + + ret = lm3533_read(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, &val); + if (ret) + return ret; + + mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1); + + if (val & mask) + linear = 1; + else + linear = 0; + + return scnprintf(buf, PAGE_SIZE, "%x\n", linear); +} + +static ssize_t store_linear(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + unsigned long linear; + u8 mask; + u8 val; + int ret; + + if (kstrtoul(buf, 0, &linear)) + return -EINVAL; + + mask = 1 << (2 * lm3533_bl_get_ctrlbank_id(bl) + 1); + + if (linear) + val = mask; + else + val = 0; + + ret = lm3533_update(bl->lm3533, LM3533_REG_CTRLBANK_AB_BCONF, val, + mask); + if (ret) + return ret; + + return len; +} + +static ssize_t show_pwm(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + u8 val; + int ret; + + ret = lm3533_ctrlbank_get_pwm(&bl->cb, &val); + if (ret) + return ret; + + return scnprintf(buf, PAGE_SIZE, "%u\n", val); +} + +static ssize_t store_pwm(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct lm3533_bl *bl = dev_get_drvdata(dev); + u8 val; + int ret; + + if (kstrtou8(buf, 0, &val)) + return -EINVAL; + + ret = lm3533_ctrlbank_set_pwm(&bl->cb, val); + if (ret) + return ret; + + return len; +} + +static LM3533_ATTR_RW(als); +static LM3533_ATTR_RO(id); +static LM3533_ATTR_RW(linear); +static LM3533_ATTR_RW(pwm); + +static struct attribute *lm3533_bl_attributes[] = { + &dev_attr_als.attr, + &dev_attr_id.attr, + &dev_attr_linear.attr, + &dev_attr_pwm.attr, + NULL, +}; + +static mode_t lm3533_bl_attr_is_visible(struct kobject *kobj, + struct attribute *attr, int n) +{ + struct device *dev = container_of(kobj, struct device, kobj); + struct lm3533_bl *bl = dev_get_drvdata(dev); + mode_t mode = attr->mode; + + if (attr == &dev_attr_als.attr) { + if (!bl->lm3533->have_als) + mode = 0; + } + + return mode; +}; + +static struct attribute_group lm3533_bl_attribute_group = { + .is_visible = lm3533_bl_attr_is_visible, + .attrs = lm3533_bl_attributes +}; + +static int __devinit lm3533_bl_setup(struct lm3533_bl *bl, + struct lm3533_bl_platform_data *pdata) +{ + int ret; + + ret = lm3533_ctrlbank_set_max_current(&bl->cb, pdata->max_current); + if (ret) + return ret; + + return lm3533_ctrlbank_set_pwm(&bl->cb, pdata->pwm); +} + +static int __devinit lm3533_bl_probe(struct platform_device *pdev) +{ + struct lm3533 *lm3533; + struct lm3533_bl_platform_data *pdata; + struct lm3533_bl *bl; + struct backlight_device *bd; + struct backlight_properties props; + int ret; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + lm3533 = dev_get_drvdata(pdev->dev.parent); + if (!lm3533) + return -EINVAL; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data\n"); + return -EINVAL; + } + + if (pdev->id < 0 || pdev->id >= LM3533_HVCTRLBANK_COUNT) { + dev_err(&pdev->dev, "illegal backlight id %d\n", pdev->id); + return -EINVAL; + } + + bl = kzalloc(sizeof(*bl), GFP_KERNEL); + if (!bl) { + dev_err(&pdev->dev, + "failed to allocate memory for backlight\n"); + return -ENOMEM; + } + + bl->lm3533 = lm3533; + bl->id = pdev->id; + + bl->cb.lm3533 = lm3533; + bl->cb.id = lm3533_bl_get_ctrlbank_id(bl); + bl->cb.dev = NULL; /* until registered */ + + memset(&props, 0, sizeof(props)); + props.type = BACKLIGHT_RAW; + props.max_brightness = LM3533_BL_MAX_BRIGHTNESS; + props.brightness = pdata->default_brightness; + bd = backlight_device_register(pdata->name, pdev->dev.parent, bl, + &lm3533_bl_ops, &props); + if (IS_ERR(bd)) { + dev_err(&pdev->dev, "failed to register backlight device\n"); + ret = PTR_ERR(bd); + goto err_free; + } + + bl->bd = bd; + bl->cb.dev = &bl->bd->dev; + + platform_set_drvdata(pdev, bl); + + ret = sysfs_create_group(&bd->dev.kobj, &lm3533_bl_attribute_group); + if (ret < 0) { + dev_err(&pdev->dev, "failed to create sysfs attributes\n"); + goto err_unregister; + } + + backlight_update_status(bd); + + ret = lm3533_bl_setup(bl, pdata); + if (ret) + goto err_sysfs_remove; + + ret = lm3533_ctrlbank_enable(&bl->cb); + if (ret) + goto err_sysfs_remove; + + return 0; + +err_sysfs_remove: + sysfs_remove_group(&bd->dev.kobj, &lm3533_bl_attribute_group); +err_unregister: + backlight_device_unregister(bd); +err_free: + kfree(bl); + + return ret; +} + +static int __devexit lm3533_bl_remove(struct platform_device *pdev) +{ + struct lm3533_bl *bl = platform_get_drvdata(pdev); + struct backlight_device *bd = bl->bd; + + dev_dbg(&bd->dev, "%s\n", __func__); + + bd->props.power = FB_BLANK_POWERDOWN; + bd->props.brightness = 0; + + lm3533_ctrlbank_disable(&bl->cb); + sysfs_remove_group(&bd->dev.kobj, &lm3533_bl_attribute_group); + backlight_device_unregister(bd); + kfree(bl); + + return 0; +} + +#ifdef CONFIG_PM +static int lm3533_bl_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct lm3533_bl *bl = platform_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s\n", __func__); + + return lm3533_ctrlbank_disable(&bl->cb); +} + +static int lm3533_bl_resume(struct platform_device *pdev) +{ + struct lm3533_bl *bl = platform_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s\n", __func__); + + return lm3533_ctrlbank_enable(&bl->cb); +} +#else +#define lm3533_bl_suspend NULL +#define lm3533_bl_resume NULL +#endif + +static void lm3533_bl_shutdown(struct platform_device *pdev) +{ + struct lm3533_bl *bl = platform_get_drvdata(pdev); + + dev_dbg(&pdev->dev, "%s\n", __func__); + + lm3533_ctrlbank_disable(&bl->cb); +} + +static struct platform_driver lm3533_bl_driver = { + .driver = { + .name = "lm3533-backlight", + .owner = THIS_MODULE, + }, + .probe = lm3533_bl_probe, + .remove = __devexit_p(lm3533_bl_remove), + .shutdown = lm3533_bl_shutdown, + .suspend = lm3533_bl_suspend, + .resume = lm3533_bl_resume, +}; +module_platform_driver(lm3533_bl_driver); + +MODULE_AUTHOR("Johan Hovold "); +MODULE_DESCRIPTION("LM3533 Backlight driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:lm3533-backlight"); -- 1.7.8.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/