Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757337Ab2ENQzE (ORCPT ); Mon, 14 May 2012 12:55:04 -0400 Received: from perches-mx.perches.com ([206.117.179.246]:52719 "EHLO labridge.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755826Ab2ENQy6 (ORCPT ); Mon, 14 May 2012 12:54:58 -0400 From: Joe Perches To: Kay Sievers , linux-kernel@vger.kernel.org Cc: Hiroshi DOYU , linux-tegra@vger.kernel.org, Peter Zijlstra , Andrew Morton , Ingo Molnar , Greg Kroah-Hartman , Linus Torvalds Subject: [PATCH 3/4] printk: Separate out console bits to console.[ch] Date: Mon, 14 May 2012 09:54:32 -0700 Message-Id: X-Mailer: git-send-email 1.7.8.111.gad25c.dirty In-Reply-To: <1337013987.29436.16.camel@joe2Laptop> References: <1337013987.29436.16.camel@joe2Laptop> In-Reply-To: <76bd4533a88ae2ebf584887d51bf306591d0c01a.1337013604.git.joe@perches.com> References: <76bd4533a88ae2ebf584887d51bf306591d0c01a.1337013604.git.joe@perches.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 52703 Lines: 1918 Add some clarity to the printk subsystem by restructuring the code a bit. Move the console variables and functions to separate code and header files. Signed-off-by: Joe Perches --- kernel/printk/Makefile | 1 + kernel/printk/console.c | 913 +++++++++++++++++++++++++++++++++++++++++++++++ kernel/printk/console.h | 11 + kernel/printk/printk.c | 854 +------------------------------------------- 4 files changed, 936 insertions(+), 843 deletions(-) create mode 100644 kernel/printk/console.c create mode 100644 kernel/printk/console.h diff --git a/kernel/printk/Makefile b/kernel/printk/Makefile index 2fc9fe7..28b7129 100644 --- a/kernel/printk/Makefile +++ b/kernel/printk/Makefile @@ -1,2 +1,3 @@ obj-y += printk.o obj-y += log_buf.o +obj-y += console.o diff --git a/kernel/printk/console.c b/kernel/printk/console.c new file mode 100644 index 0000000..82a5455 --- /dev/null +++ b/kernel/printk/console.c @@ -0,0 +1,913 @@ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include /* For in_interrupt() */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "log_buf.h" +#include "console.h" + +#include + +extern volatile unsigned int printk_cpu; +extern size_t log_prefix(const char *p, unsigned int *level, char *special); +extern int __read_mostly keep_bootcon; + +/* We show everything that is MORE important than this.. */ +#define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */ +#define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */ + +#define DEFAULT_MESSAGE_LOGLEVEL CONFIG_DEFAULT_MESSAGE_LOGLEVEL + +int console_printk[4] = { + DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */ + DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */ + MINIMUM_CONSOLE_LOGLEVEL, /* minimum_console_loglevel */ + DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */ +}; + +/* + * console_sem protects the console_drivers list, and also + * provides serialisation for access to the entire console + * driver system. + */ +DEFINE_SEMAPHORE(console_sem); + +struct console *console_drivers; +EXPORT_SYMBOL_GPL(console_drivers); + +/* + * This is used for debugging the mess that is the VT code by + * keeping track if we have the console semaphore held. It's + * definitely not the perfect debug tool (we don't know if _WE_ + * hold it are racing, but it helps tracking those weird code + * path in the console code where we end up in places I want + * locked without the console sempahore held + */ + +static int console_locked; +static int console_suspended; + +static int saved_console_loglevel = -1; + +/* + * If exclusive_console is non-NULL then only this console is to be printed to. + */ +static struct console *exclusive_console; + +/* + * Array of consoles built from command line options (console=) + */ +struct console_cmdline +{ + char name[8]; /* Name of the driver */ + int index; /* Minor dev. to use */ + char *options; /* Options for the driver */ +#ifdef CONFIG_A11Y_BRAILLE_CONSOLE + char *brl_options; /* Options for braille driver */ +#endif +}; + +#define MAX_CMDLINECONSOLES 8 + +static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES]; +static int selected_console = -1; +static int preferred_console = -1; +int console_set_on_cmdline; +EXPORT_SYMBOL(console_set_on_cmdline); + +/* Flag: console code may call schedule() */ +static int console_may_schedule; + +static bool __read_mostly ignore_loglevel; + +static int __init ignore_loglevel_setup(char *str) +{ + ignore_loglevel = 1; + printk(KERN_INFO "debug: ignoring loglevel setting\n"); + + return 0; +} + +early_param("ignore_loglevel", ignore_loglevel_setup); +module_param(ignore_loglevel, bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(ignore_loglevel, + "ignore loglevel setting, print all kernel messages to the console"); + +int console_do_syslog(int type, char __user *buf, int len, bool from_file) +{ + int error = 0; + + switch (type) { + case SYSLOG_ACTION_CONSOLE_OFF: /* Disable logging to console */ + if (saved_console_loglevel == -1) + saved_console_loglevel = console_loglevel; + console_loglevel = minimum_console_loglevel; + break; + case SYSLOG_ACTION_CONSOLE_ON: /* Enable logging to console */ + if (saved_console_loglevel != -1) { + console_loglevel = saved_console_loglevel; + saved_console_loglevel = -1; + } + break; + case SYSLOG_ACTION_CONSOLE_LEVEL: /* Set level of messages + * printed to console + */ + + error = -EINVAL; + if (len < 1 || len > 8) + goto out; + if (len < minimum_console_loglevel) + len = minimum_console_loglevel; + console_loglevel = len; + /* Implicitly re-enable logging to console */ + saved_console_loglevel = -1; + error = 0; + break; + } +out: + return error; +} + +/* + * Call the console drivers on a range of log_buf + */ +static void __call_console_drivers(unsigned start, unsigned end) +{ + struct console *con; + + for_each_console(con) { + if (exclusive_console && con != exclusive_console) + continue; + if ((con->flags & CON_ENABLED) && con->write && + (cpu_online(smp_processor_id()) || + (con->flags & CON_ANYTIME))) + con->write(con, &LOG_BUF(start), end - start); + } +} + +/* + * Write out chars from start to end - 1 inclusive + */ +static void _call_console_drivers(unsigned start, + unsigned end, int msg_log_level) +{ + trace_console(&LOG_BUF(0), start, end, log_buf_len); + + if ((msg_log_level < console_loglevel || ignore_loglevel) && + console_drivers && start != end) { + if ((start & LOG_BUF_MASK) > (end & LOG_BUF_MASK)) { + /* wrapped write */ + __call_console_drivers(start & LOG_BUF_MASK, + log_buf_len); + __call_console_drivers(0, end & LOG_BUF_MASK); + } else { + __call_console_drivers(start, end); + } + } +} + +/* + * Call the console drivers, asking them to write out + * log_buf[start] to log_buf[end - 1]. + * The console_lock must be held. + */ +static void call_console_drivers(unsigned start, unsigned end) +{ + unsigned cur_index, start_print; + static int msg_level = -1; + + BUG_ON(((int)(start - end)) > 0); + + cur_index = start; + start_print = start; + while (cur_index != end) { + if (msg_level < 0 && ((end - cur_index) > 2)) { + /* strip log prefix */ + cur_index += log_prefix(&LOG_BUF(cur_index), &msg_level, + NULL); + start_print = cur_index; + } + while (cur_index != end) { + char c = LOG_BUF(cur_index); + + cur_index++; + if (c == '\n') { + if (msg_level < 0) { + /* + * printk() has already given us + * loglevel tags in the buffer. + * This code is here in case the + * log buffer has wrapped right round + * and scribbled on those tags + */ + msg_level = default_message_loglevel; + } + _call_console_drivers(start_print, cur_index, + msg_level); + msg_level = -1; + start_print = cur_index; + break; + } + } + } + _call_console_drivers(start_print, end, msg_level); +} + +/* + * Zap console related locks when oopsing. Only zap at most once + * every 10 seconds, to leave time for slow consoles to print a + * full oops. + */ +void console_zap_locks(void) +{ + static unsigned long oops_timestamp; + + if (time_after_eq(jiffies, oops_timestamp) && + !time_after(jiffies, oops_timestamp + 30 * HZ)) + return; + + oops_timestamp = jiffies; + + debug_locks_off(); + /* If a crash is occurring, make sure we can't deadlock */ + raw_spin_lock_init(&logbuf_lock); + /* And make sure that we print immediately */ + sema_init(&console_sem, 1); +} + +/* Check if we have any console registered that can be called early in boot. */ +static int have_callable_console(void) +{ + struct console *con; + + for_each_console(con) + if (con->flags & CON_ANYTIME) + return 1; + + return 0; +} + +/* + * Can we actually use the console at this time on this cpu? + * + * Console drivers may assume that per-cpu resources have + * been allocated. So unless they're explicitly marked as + * being able to cope (CON_ANYTIME) don't call them until + * this CPU is officially up. + */ +static inline int can_use_console(unsigned int cpu) +{ + return cpu_online(cpu) || have_callable_console(); +} + +/* + * Try to get console ownership to actually show the kernel + * messages from a 'printk'. Return true (and with the + * console_lock held, and 'console_locked' set) if it + * is successful, false otherwise. + * + * This gets called with the 'logbuf_lock' spinlock held and + * interrupts disabled. It should return with 'lockbuf_lock' + * released but interrupts still disabled. + */ +int console_trylock_for_printk(unsigned int cpu) + __releases(&logbuf_lock) +{ + int retval = 0, wake = 0; + + if (console_trylock()) { + retval = 1; + + /* + * If we can't use the console, we need to release + * the console semaphore by hand to avoid flushing + * the buffer. We need to hold the console semaphore + * in order to do this test safely. + */ + if (!can_use_console(cpu)) { + console_locked = 0; + wake = 1; + retval = 0; + } + } + printk_cpu = UINT_MAX; + if (wake) + up(&console_sem); + raw_spin_unlock(&logbuf_lock); + return retval; +} + +static int __add_preferred_console(char *name, int idx, char *options, + char *brl_options) +{ + struct console_cmdline *c; + int i; + + /* + * See if this tty is not yet registered, and + * if we have a slot free. + */ + for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) + if (strcmp(console_cmdline[i].name, name) == 0 && + console_cmdline[i].index == idx) { + if (!brl_options) + selected_console = i; + return 0; + } + if (i == MAX_CMDLINECONSOLES) + return -E2BIG; + if (!brl_options) + selected_console = i; + c = &console_cmdline[i]; + strlcpy(c->name, name, sizeof(c->name)); + c->options = options; +#ifdef CONFIG_A11Y_BRAILLE_CONSOLE + c->brl_options = brl_options; +#endif + c->index = idx; + return 0; +} +/* + * Set up a list of consoles. Called from init/main.c + */ +static int __init console_setup(char *str) +{ + char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for index */ + char *s, *options, *brl_options = NULL; + int idx; + +#ifdef CONFIG_A11Y_BRAILLE_CONSOLE + if (!memcmp(str, "brl,", 4)) { + brl_options = ""; + str += 4; + } else if (!memcmp(str, "brl=", 4)) { + brl_options = str + 4; + str = strchr(brl_options, ','); + if (!str) { + printk(KERN_ERR "need port name after brl=\n"); + return 1; + } + *(str++) = 0; + } +#endif + + /* + * Decode str into name, index, options. + */ + if (str[0] >= '0' && str[0] <= '9') { + strcpy(buf, "ttyS"); + strncpy(buf + 4, str, sizeof(buf) - 5); + } else { + strncpy(buf, str, sizeof(buf) - 1); + } + buf[sizeof(buf) - 1] = 0; + if ((options = strchr(str, ',')) != NULL) + *(options++) = 0; +#ifdef __sparc__ + if (!strcmp(str, "ttya")) + strcpy(buf, "ttyS0"); + if (!strcmp(str, "ttyb")) + strcpy(buf, "ttyS1"); +#endif + for (s = buf; *s; s++) + if ((*s >= '0' && *s <= '9') || *s == ',') + break; + idx = simple_strtoul(s, NULL, 10); + *s = 0; + + __add_preferred_console(buf, idx, options, brl_options); + console_set_on_cmdline = 1; + return 1; +} +__setup("console=", console_setup); + +/** + * add_preferred_console - add a device to the list of preferred consoles. + * @name: device name + * @idx: device index + * @options: options for this console + * + * The last preferred console added will be used for kernel messages + * and stdin/out/err for init. Normally this is used by console_setup + * above to handle user-supplied console arguments; however it can also + * be used by arch-specific code either to override the user or more + * commonly to provide a default console (ie from PROM variables) when + * the user has not supplied one. + */ +int add_preferred_console(char *name, int idx, char *options) +{ + return __add_preferred_console(name, idx, options, NULL); +} + +int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, + char *options) +{ + struct console_cmdline *c; + int i; + + for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) + if (strcmp(console_cmdline[i].name, name) == 0 && + console_cmdline[i].index == idx) { + c = &console_cmdline[i]; + strlcpy(c->name, name_new, sizeof(c->name)); + c->name[sizeof(c->name) - 1] = 0; + c->options = options; + c->index = idx_new; + return i; + } + /* not found */ + return -1; +} + +bool console_suspend_enabled = 1; +EXPORT_SYMBOL(console_suspend_enabled); + +static int __init console_suspend_disable(char *str) +{ + console_suspend_enabled = 0; + return 1; +} +__setup("no_console_suspend", console_suspend_disable); +module_param_named(console_suspend, console_suspend_enabled, + bool, S_IRUGO | S_IWUSR); +MODULE_PARM_DESC(console_suspend, + "suspend console during suspend and hibernate operations"); + +/** + * suspend_console - suspend the console subsystem + * + * This disables printk() while we go into suspend states + */ +void suspend_console(void) +{ + if (!console_suspend_enabled) + return; + printk("Suspending console(s) (use no_console_suspend to debug)\n"); + console_lock(); + console_suspended = 1; + up(&console_sem); +} + +void resume_console(void) +{ + if (!console_suspend_enabled) + return; + down(&console_sem); + console_suspended = 0; + console_unlock(); +} + +/** + * console_cpu_notify - print deferred console messages after CPU hotplug + * @self: notifier struct + * @action: CPU hotplug event + * @hcpu: unused + * + * If printk() is called from a CPU that is not online yet, the messages + * will be spooled but will not show up on the console. This function is + * called when a new CPU comes online (or fails to come up), and ensures + * that any such output gets printed. + */ +int __cpuinit console_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu) +{ + switch (action) { + case CPU_ONLINE: + case CPU_DEAD: + case CPU_DYING: + case CPU_DOWN_FAILED: + case CPU_UP_CANCELED: + console_lock(); + console_unlock(); + } + return NOTIFY_OK; +} + +/** + * console_lock - lock the console system for exclusive use. + * + * Acquires a lock which guarantees that the caller has + * exclusive access to the console system and the console_drivers list. + * + * Can sleep, returns nothing. + */ +void console_lock(void) +{ + BUG_ON(in_interrupt()); + down(&console_sem); + if (console_suspended) + return; + console_locked = 1; + console_may_schedule = 1; +} +EXPORT_SYMBOL(console_lock); + +/** + * console_trylock - try to lock the console system for exclusive use. + * + * Tried to acquire a lock which guarantees that the caller has + * exclusive access to the console system and the console_drivers list. + * + * returns 1 on success, and 0 on failure to acquire the lock. + */ +int console_trylock(void) +{ + if (down_trylock(&console_sem)) + return 0; + if (console_suspended) { + up(&console_sem); + return 0; + } + console_locked = 1; + console_may_schedule = 0; + return 1; +} +EXPORT_SYMBOL(console_trylock); + +int is_console_locked(void) +{ + return console_locked; +} + +/** + * console_unlock - unlock the console system + * + * Releases the console_lock which the caller holds on the console system + * and the console driver list. + * + * While the console_lock was held, console output may have been buffered + * by printk(). If this is the case, console_unlock(); emits + * the output prior to releasing the lock. + * + * If there is output waiting for klogd, we wake it up. + * + * console_unlock(); may be called from any context. + */ +void console_unlock(void) +{ + unsigned long flags; + unsigned _con_start, _log_end; + unsigned wake_klogd = 0, retry = 0; + + if (console_suspended) { + up(&console_sem); + return; + } + + console_may_schedule = 0; + +again: + for ( ; ; ) { + raw_spin_lock_irqsave(&logbuf_lock, flags); + wake_klogd |= log_start - log_end; + if (con_start == log_end) + break; /* Nothing to print */ + _con_start = con_start; + _log_end = log_end; + con_start = log_end; /* Flush */ + raw_spin_unlock(&logbuf_lock); + stop_critical_timings(); /* don't trace print latency */ + call_console_drivers(_con_start, _log_end); + start_critical_timings(); + local_irq_restore(flags); + } + console_locked = 0; + + /* Release the exclusive_console once it is used */ + if (unlikely(exclusive_console)) + exclusive_console = NULL; + + raw_spin_unlock(&logbuf_lock); + + up(&console_sem); + + /* + * Someone could have filled up the buffer again, so re-check if there's + * something to flush. In case we cannot trylock the console_sem again, + * there's a new owner and the console_unlock() from them will do the + * flush, no worries. + */ + raw_spin_lock(&logbuf_lock); + if (con_start != log_end) + retry = 1; + raw_spin_unlock_irqrestore(&logbuf_lock, flags); + + if (retry && console_trylock()) + goto again; + + if (wake_klogd) + wake_up_klogd(); +} +EXPORT_SYMBOL(console_unlock); + +/** + * console_conditional_schedule - yield the CPU if required + * + * If the console code is currently allowed to sleep, and + * if this CPU should yield the CPU to another task, do + * so here. + * + * Must be called within console_lock();. + */ +void __sched console_conditional_schedule(void) +{ + if (console_may_schedule) + cond_resched(); +} +EXPORT_SYMBOL(console_conditional_schedule); + +void console_unblank(void) +{ + struct console *c; + + /* + * console_unblank can no longer be called in interrupt context unless + * oops_in_progress is set to 1.. + */ + if (oops_in_progress) { + if (down_trylock(&console_sem) != 0) + return; + } else + console_lock(); + + console_locked = 1; + console_may_schedule = 0; + for_each_console(c) + if ((c->flags & CON_ENABLED) && c->unblank) + c->unblank(); + console_unlock(); +} + +/* + * Return the console tty driver structure and its associated index + */ +struct tty_driver *console_device(int *index) +{ + struct console *c; + struct tty_driver *driver = NULL; + + console_lock(); + for_each_console(c) { + if (!c->device) + continue; + driver = c->device(c, index); + if (driver) + break; + } + console_unlock(); + return driver; +} + +/* + * Prevent further output on the passed console device so that (for example) + * serial drivers can disable console output before suspending a port, and can + * re-enable output afterwards. + */ +void console_stop(struct console *console) +{ + console_lock(); + console->flags &= ~CON_ENABLED; + console_unlock(); +} +EXPORT_SYMBOL(console_stop); + +void console_start(struct console *console) +{ + console_lock(); + console->flags |= CON_ENABLED; + console_unlock(); +} +EXPORT_SYMBOL(console_start); + +/* + * The console driver calls this routine during kernel initialization + * to register the console printing procedure with printk() and to + * print any messages that were printed by the kernel before the + * console driver was initialized. + * + * This can happen pretty early during the boot process (because of + * early_printk) - sometimes before setup_arch() completes - be careful + * of what kernel features are used - they may not be initialised yet. + * + * There are two types of consoles - bootconsoles (early_printk) and + * "real" consoles (everything which is not a bootconsole) which are + * handled differently. + * - Any number of bootconsoles can be registered at any time. + * - As soon as a "real" console is registered, all bootconsoles + * will be unregistered automatically. + * - Once a "real" console is registered, any attempt to register a + * bootconsoles will be rejected + */ +void register_console(struct console *newcon) +{ + int i; + unsigned long flags; + struct console *bcon = NULL; + + /* + * before we register a new CON_BOOT console, make sure we don't + * already have a valid console + */ + if (console_drivers && newcon->flags & CON_BOOT) { + /* find the last or real console */ + for_each_console(bcon) { + if (!(bcon->flags & CON_BOOT)) { + printk(KERN_INFO "Too late to register bootconsole %s%d\n", + newcon->name, newcon->index); + return; + } + } + } + + if (console_drivers && console_drivers->flags & CON_BOOT) + bcon = console_drivers; + + if (preferred_console < 0 || bcon || !console_drivers) + preferred_console = selected_console; + + if (newcon->early_setup) + newcon->early_setup(); + + /* + * See if we want to use this console driver. If we + * didn't select a console we take the first one + * that registers here. + */ + if (preferred_console < 0) { + if (newcon->index < 0) + newcon->index = 0; + if (newcon->setup == NULL || + newcon->setup(newcon, NULL) == 0) { + newcon->flags |= CON_ENABLED; + if (newcon->device) { + newcon->flags |= CON_CONSDEV; + preferred_console = 0; + } + } + } + + /* + * See if this console matches one we selected on + * the command line. + */ + for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; + i++) { + if (strcmp(console_cmdline[i].name, newcon->name) != 0) + continue; + if (newcon->index >= 0 && + newcon->index != console_cmdline[i].index) + continue; + if (newcon->index < 0) + newcon->index = console_cmdline[i].index; +#ifdef CONFIG_A11Y_BRAILLE_CONSOLE + if (console_cmdline[i].brl_options) { + newcon->flags |= CON_BRL; + braille_register_console(newcon, + console_cmdline[i].index, + console_cmdline[i].options, + console_cmdline[i].brl_options); + return; + } +#endif + if (newcon->setup && + newcon->setup(newcon, console_cmdline[i].options) != 0) + break; + newcon->flags |= CON_ENABLED; + newcon->index = console_cmdline[i].index; + if (i == selected_console) { + newcon->flags |= CON_CONSDEV; + preferred_console = selected_console; + } + break; + } + + if (!(newcon->flags & CON_ENABLED)) + return; + + /* + * If we have a bootconsole, and are switching to a real console, + * don't print everything out again, since when the boot console, and + * the real console are the same physical device, it's annoying to + * see the beginning boot messages twice + */ + if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV)) + newcon->flags &= ~CON_PRINTBUFFER; + + /* + * Put this console in the list - keep the + * preferred driver at the head of the list. + */ + console_lock(); + if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) { + newcon->next = console_drivers; + console_drivers = newcon; + if (newcon->next) + newcon->next->flags &= ~CON_CONSDEV; + } else { + newcon->next = console_drivers->next; + console_drivers->next = newcon; + } + if (newcon->flags & CON_PRINTBUFFER) { + /* + * console_unlock(); will print out the buffered messages + * for us. + */ + raw_spin_lock_irqsave(&logbuf_lock, flags); + con_start = log_start; + raw_spin_unlock_irqrestore(&logbuf_lock, flags); + /* + * We're about to replay the log buffer. Only do this to the + * just-registered console to avoid excessive message spam to + * the already-registered consoles. + */ + exclusive_console = newcon; + } + console_unlock(); + console_sysfs_notify(); + + /* + * By unregistering the bootconsoles after we enable the real console + * we get the "console xxx enabled" message on all the consoles - + * boot consoles, real consoles, etc - this is to ensure that end + * users know there might be something in the kernel's log buffer that + * went to the bootconsole (that they do not see on the real console) + */ + if (bcon && + ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV) && + !keep_bootcon) { + /* we need to iterate through twice, to make sure we print + * everything out, before we unregister the console(s) + */ + printk(KERN_INFO "console [%s%d] enabled, bootconsole disabled\n", + newcon->name, newcon->index); + for_each_console(bcon) + if (bcon->flags & CON_BOOT) + unregister_console(bcon); + } else { + printk(KERN_INFO "%sconsole [%s%d] enabled\n", + (newcon->flags & CON_BOOT) ? "boot" : "" , + newcon->name, newcon->index); + } +} +EXPORT_SYMBOL(register_console); + +int unregister_console(struct console *console) +{ + struct console *a, *b; + int res = 1; + +#ifdef CONFIG_A11Y_BRAILLE_CONSOLE + if (console->flags & CON_BRL) + return braille_unregister_console(console); +#endif + + console_lock(); + if (console_drivers == console) { + console_drivers=console->next; + res = 0; + } else if (console_drivers) { + for (a=console_drivers->next, b=console_drivers ; + a; b=a, a=b->next) { + if (a == console) { + b->next = a->next; + res = 0; + break; + } + } + } + + /* + * If this isn't the last console and it has CON_CONSDEV set, we + * need to set it on the next preferred console. + */ + if (console_drivers != NULL && console->flags & CON_CONSDEV) + console_drivers->flags |= CON_CONSDEV; + + console_unlock(); + console_sysfs_notify(); + return res; +} +EXPORT_SYMBOL(unregister_console); + diff --git a/kernel/printk/console.h b/kernel/printk/console.h new file mode 100644 index 0000000..7e15f6f --- /dev/null +++ b/kernel/printk/console.h @@ -0,0 +1,11 @@ +#ifndef PRINTK_CONSOLE_H +#define PRINTK_CONSOLE_H + +int console_do_syslog(int type, char __user *buf, int len, bool from_file); +void console_zap_locks(void); +int console_trylock_for_printk(unsigned int cpu) + __releases(&logbuf_lock); +int __cpuinit console_cpu_notify(struct notifier_block *self, + unsigned long action, void *hcpu); + +#endif diff --git a/kernel/printk/printk.c b/kernel/printk/printk.c index e90818a..3281441 100644 --- a/kernel/printk/printk.c +++ b/kernel/printk/printk.c @@ -37,6 +37,8 @@ #include +#include "console.h" + #define CREATE_TRACE_POINTS #include @@ -50,17 +52,6 @@ void asmlinkage __attribute__((weak)) early_printk(const char *fmt, ...) /* printk's without a loglevel use this.. */ #define DEFAULT_MESSAGE_LOGLEVEL CONFIG_DEFAULT_MESSAGE_LOGLEVEL -/* We show everything that is MORE important than this.. */ -#define MINIMUM_CONSOLE_LOGLEVEL 1 /* Minimum loglevel we let people use */ -#define DEFAULT_CONSOLE_LOGLEVEL 7 /* anything MORE serious than KERN_DEBUG */ - -int console_printk[4] = { - DEFAULT_CONSOLE_LOGLEVEL, /* console_loglevel */ - DEFAULT_MESSAGE_LOGLEVEL, /* default_message_loglevel */ - MINIMUM_CONSOLE_LOGLEVEL, /* minimum_console_loglevel */ - DEFAULT_CONSOLE_LOGLEVEL, /* default_console_loglevel */ -}; - /* * Low level drivers may need that to know if they can schedule in * their unblank() callback or not. So let's export it. @@ -68,61 +59,10 @@ int console_printk[4] = { int oops_in_progress; EXPORT_SYMBOL(oops_in_progress); -/* - * console_sem protects the console_drivers list, and also - * provides serialisation for access to the entire console - * driver system. - */ -DEFINE_SEMAPHORE(console_sem); - -struct console *console_drivers; -EXPORT_SYMBOL_GPL(console_drivers); - -/* - * This is used for debugging the mess that is the VT code by - * keeping track if we have the console semaphore held. It's - * definitely not the perfect debug tool (we don't know if _WE_ - * hold it are racing, but it helps tracking those weird code - * path in the console code where we end up in places I want - * locked without the console sempahore held - */ -static int console_locked, console_suspended; - -/* - * If exclusive_console is non-NULL then only this console is to be printed to. - */ -static struct console *exclusive_console; - -/* - * Array of consoles built from command line options (console=) - */ -struct console_cmdline -{ - char name[8]; /* Name of the driver */ - int index; /* Minor dev. to use */ - char *options; /* Options for the driver */ -#ifdef CONFIG_A11Y_BRAILLE_CONSOLE - char *brl_options; /* Options for braille driver */ -#endif -}; - -#define MAX_CMDLINECONSOLES 8 - -static struct console_cmdline console_cmdline[MAX_CMDLINECONSOLES]; -static int selected_console = -1; -static int preferred_console = -1; -int console_set_on_cmdline; -EXPORT_SYMBOL(console_set_on_cmdline); - -/* Flag: console code may call schedule() */ -static int console_may_schedule; - #ifdef CONFIG_PRINTK #include "log_buf.h" -static int saved_console_loglevel = -1; - #ifdef CONFIG_BOOT_PRINTK_DELAY static int boot_delay; /* msecs delay after each printk during bootup */ @@ -242,30 +182,13 @@ int do_syslog(int type, char __user *buf, int len, bool from_file) error = log_buf_do_syslog(type, buf, len, from_file); break; - /* Disable logging to console */ - case SYSLOG_ACTION_CONSOLE_OFF: - if (saved_console_loglevel == -1) - saved_console_loglevel = console_loglevel; - console_loglevel = minimum_console_loglevel; - break; - /* Enable logging to console */ - case SYSLOG_ACTION_CONSOLE_ON: - if (saved_console_loglevel != -1) { - console_loglevel = saved_console_loglevel; - saved_console_loglevel = -1; - } - break; - /* Set level of messages printed to console */ + case SYSLOG_ACTION_CONSOLE_OFF: /* Disable logging to console */ + case SYSLOG_ACTION_CONSOLE_ON: /* Enable logging to console */ case SYSLOG_ACTION_CONSOLE_LEVEL: - error = -EINVAL; - if (len < 1 || len > 8) - goto out; - if (len < minimum_console_loglevel) - len = minimum_console_loglevel; - console_loglevel = len; - /* Implicitly re-enable logging to console */ - saved_console_loglevel = -1; - error = 0; + /* Set level of messages + * printed to console + */ + error = console_do_syslog(type, buf, len, from_file); break; default: error = -EINVAL; @@ -297,59 +220,6 @@ void kdb_syslog_data(char *syslog_data[4]) #endif /* CONFIG_KGDB_KDB */ /* - * Call the console drivers on a range of log_buf - */ -static void __call_console_drivers(unsigned start, unsigned end) -{ - struct console *con; - - for_each_console(con) { - if (exclusive_console && con != exclusive_console) - continue; - if ((con->flags & CON_ENABLED) && con->write && - (cpu_online(smp_processor_id()) || - (con->flags & CON_ANYTIME))) - con->write(con, &LOG_BUF(start), end - start); - } -} - -static bool __read_mostly ignore_loglevel; - -static int __init ignore_loglevel_setup(char *str) -{ - ignore_loglevel = 1; - printk(KERN_INFO "debug: ignoring loglevel setting.\n"); - - return 0; -} - -early_param("ignore_loglevel", ignore_loglevel_setup); -module_param(ignore_loglevel, bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(ignore_loglevel, "ignore loglevel setting, to" - "print all kernel messages to the console."); - -/* - * Write out chars from start to end - 1 inclusive - */ -static void _call_console_drivers(unsigned start, - unsigned end, int msg_log_level) -{ - trace_console(&LOG_BUF(0), start, end, log_buf_len); - - if ((msg_log_level < console_loglevel || ignore_loglevel) && - console_drivers && start != end) { - if ((start & LOG_BUF_MASK) > (end & LOG_BUF_MASK)) { - /* wrapped write */ - __call_console_drivers(start & LOG_BUF_MASK, - log_buf_len); - __call_console_drivers(0, end & LOG_BUF_MASK); - } else { - __call_console_drivers(start, end); - } - } -} - -/* * Parse the syslog header <[0-9]*>. The decimal value represents 32bit, the * lower 3 bit are the log level, the rest are the log facility. In case * userspace passes usual userspace syslog messages to /dev/kmsg or @@ -363,7 +233,7 @@ static void _call_console_drivers(unsigned start, * and returned. If no valid header is found, 0 is returned and the passed * variables are not touched. */ -static size_t log_prefix(const char *p, unsigned int *level, char *special) +size_t log_prefix(const char *p, unsigned int *level, char *special) { unsigned int lev = 0; char sp = '\0'; @@ -411,50 +281,6 @@ static size_t log_prefix(const char *p, unsigned int *level, char *special) return len; } -/* - * Call the console drivers, asking them to write out - * log_buf[start] to log_buf[end - 1]. - * The console_lock must be held. - */ -static void call_console_drivers(unsigned start, unsigned end) -{ - unsigned cur_index, start_print; - static int msg_level = -1; - - BUG_ON(((int)(start - end)) > 0); - - cur_index = start; - start_print = start; - while (cur_index != end) { - if (msg_level < 0 && ((end - cur_index) > 2)) { - /* strip log prefix */ - cur_index += log_prefix(&LOG_BUF(cur_index), &msg_level, NULL); - start_print = cur_index; - } - while (cur_index != end) { - char c = LOG_BUF(cur_index); - - cur_index++; - if (c == '\n') { - if (msg_level < 0) { - /* - * printk() has already given us loglevel tags in - * the buffer. This code is here in case the - * log buffer has wrapped right round and scribbled - * on those tags - */ - msg_level = default_message_loglevel; - } - _call_console_drivers(start_print, cur_index, msg_level); - msg_level = -1; - start_print = cur_index; - break; - } - } - } - _call_console_drivers(start_print, end, msg_level); -} - #if defined(CONFIG_PRINTK_TIME) static bool printk_time = 1; #else @@ -465,18 +291,6 @@ module_param_named(time, printk_time, bool, S_IRUGO | S_IWUSR); static bool always_kmsg_dump; module_param_named(always_kmsg_dump, always_kmsg_dump, bool, S_IRUGO | S_IWUSR); -/* Check if we have any console registered that can be called early in boot. */ -static int have_callable_console(void) -{ - struct console *con; - - for_each_console(con) - if (con->flags & CON_ANYTIME) - return 1; - - return 0; -} - /** * printk - print a kernel message * @fmt: format string @@ -520,57 +334,8 @@ asmlinkage int printk(const char *fmt, ...) } /* cpu currently holding logbuf_lock */ -static volatile unsigned int printk_cpu = UINT_MAX; - -/* - * Can we actually use the console at this time on this cpu? - * - * Console drivers may assume that per-cpu resources have - * been allocated. So unless they're explicitly marked as - * being able to cope (CON_ANYTIME) don't call them until - * this CPU is officially up. - */ -static inline int can_use_console(unsigned int cpu) -{ - return cpu_online(cpu) || have_callable_console(); -} - -/* - * Try to get console ownership to actually show the kernel - * messages from a 'printk'. Return true (and with the - * console_lock held, and 'console_locked' set) if it - * is successful, false otherwise. - * - * This gets called with the 'logbuf_lock' spinlock held and - * interrupts disabled. It should return with 'lockbuf_lock' - * released but interrupts still disabled. - */ -static int console_trylock_for_printk(unsigned int cpu) - __releases(&logbuf_lock) -{ - int retval = 0, wake = 0; - - if (console_trylock()) { - retval = 1; +volatile unsigned int printk_cpu = UINT_MAX; - /* - * If we can't use the console, we need to release - * the console semaphore by hand to avoid flushing - * the buffer. We need to hold the console semaphore - * in order to do this test safely. - */ - if (!can_use_console(cpu)) { - console_locked = 0; - wake = 1; - retval = 0; - } - } - printk_cpu = UINT_MAX; - if (wake) - up(&console_sem); - raw_spin_unlock(&logbuf_lock); - return retval; -} static const char recursion_bug_msg [] = KERN_CRIT "BUG: recent printk recursion!\n"; static int recursion_bug; @@ -732,245 +497,8 @@ out_restore_irqs: EXPORT_SYMBOL(printk); EXPORT_SYMBOL(vprintk); -#else - -static void call_console_drivers(unsigned start, unsigned end) -{ -} - #endif -static int __add_preferred_console(char *name, int idx, char *options, - char *brl_options) -{ - struct console_cmdline *c; - int i; - - /* - * See if this tty is not yet registered, and - * if we have a slot free. - */ - for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) - if (strcmp(console_cmdline[i].name, name) == 0 && - console_cmdline[i].index == idx) { - if (!brl_options) - selected_console = i; - return 0; - } - if (i == MAX_CMDLINECONSOLES) - return -E2BIG; - if (!brl_options) - selected_console = i; - c = &console_cmdline[i]; - strlcpy(c->name, name, sizeof(c->name)); - c->options = options; -#ifdef CONFIG_A11Y_BRAILLE_CONSOLE - c->brl_options = brl_options; -#endif - c->index = idx; - return 0; -} -/* - * Set up a list of consoles. Called from init/main.c - */ -static int __init console_setup(char *str) -{ - char buf[sizeof(console_cmdline[0].name) + 4]; /* 4 for index */ - char *s, *options, *brl_options = NULL; - int idx; - -#ifdef CONFIG_A11Y_BRAILLE_CONSOLE - if (!memcmp(str, "brl,", 4)) { - brl_options = ""; - str += 4; - } else if (!memcmp(str, "brl=", 4)) { - brl_options = str + 4; - str = strchr(brl_options, ','); - if (!str) { - printk(KERN_ERR "need port name after brl=\n"); - return 1; - } - *(str++) = 0; - } -#endif - - /* - * Decode str into name, index, options. - */ - if (str[0] >= '0' && str[0] <= '9') { - strcpy(buf, "ttyS"); - strncpy(buf + 4, str, sizeof(buf) - 5); - } else { - strncpy(buf, str, sizeof(buf) - 1); - } - buf[sizeof(buf) - 1] = 0; - if ((options = strchr(str, ',')) != NULL) - *(options++) = 0; -#ifdef __sparc__ - if (!strcmp(str, "ttya")) - strcpy(buf, "ttyS0"); - if (!strcmp(str, "ttyb")) - strcpy(buf, "ttyS1"); -#endif - for (s = buf; *s; s++) - if ((*s >= '0' && *s <= '9') || *s == ',') - break; - idx = simple_strtoul(s, NULL, 10); - *s = 0; - - __add_preferred_console(buf, idx, options, brl_options); - console_set_on_cmdline = 1; - return 1; -} -__setup("console=", console_setup); - -/** - * add_preferred_console - add a device to the list of preferred consoles. - * @name: device name - * @idx: device index - * @options: options for this console - * - * The last preferred console added will be used for kernel messages - * and stdin/out/err for init. Normally this is used by console_setup - * above to handle user-supplied console arguments; however it can also - * be used by arch-specific code either to override the user or more - * commonly to provide a default console (ie from PROM variables) when - * the user has not supplied one. - */ -int add_preferred_console(char *name, int idx, char *options) -{ - return __add_preferred_console(name, idx, options, NULL); -} - -int update_console_cmdline(char *name, int idx, char *name_new, int idx_new, char *options) -{ - struct console_cmdline *c; - int i; - - for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; i++) - if (strcmp(console_cmdline[i].name, name) == 0 && - console_cmdline[i].index == idx) { - c = &console_cmdline[i]; - strlcpy(c->name, name_new, sizeof(c->name)); - c->name[sizeof(c->name) - 1] = 0; - c->options = options; - c->index = idx_new; - return i; - } - /* not found */ - return -1; -} - -bool console_suspend_enabled = 1; -EXPORT_SYMBOL(console_suspend_enabled); - -static int __init console_suspend_disable(char *str) -{ - console_suspend_enabled = 0; - return 1; -} -__setup("no_console_suspend", console_suspend_disable); -module_param_named(console_suspend, console_suspend_enabled, - bool, S_IRUGO | S_IWUSR); -MODULE_PARM_DESC(console_suspend, "suspend console during suspend" - " and hibernate operations"); - -/** - * suspend_console - suspend the console subsystem - * - * This disables printk() while we go into suspend states - */ -void suspend_console(void) -{ - if (!console_suspend_enabled) - return; - printk("Suspending console(s) (use no_console_suspend to debug)\n"); - console_lock(); - console_suspended = 1; - up(&console_sem); -} - -void resume_console(void) -{ - if (!console_suspend_enabled) - return; - down(&console_sem); - console_suspended = 0; - console_unlock(); -} - -/** - * console_cpu_notify - print deferred console messages after CPU hotplug - * @self: notifier struct - * @action: CPU hotplug event - * @hcpu: unused - * - * If printk() is called from a CPU that is not online yet, the messages - * will be spooled but will not show up on the console. This function is - * called when a new CPU comes online (or fails to come up), and ensures - * that any such output gets printed. - */ -static int __cpuinit console_cpu_notify(struct notifier_block *self, - unsigned long action, void *hcpu) -{ - switch (action) { - case CPU_ONLINE: - case CPU_DEAD: - case CPU_DYING: - case CPU_DOWN_FAILED: - case CPU_UP_CANCELED: - console_lock(); - console_unlock(); - } - return NOTIFY_OK; -} - -/** - * console_lock - lock the console system for exclusive use. - * - * Acquires a lock which guarantees that the caller has - * exclusive access to the console system and the console_drivers list. - * - * Can sleep, returns nothing. - */ -void console_lock(void) -{ - BUG_ON(in_interrupt()); - down(&console_sem); - if (console_suspended) - return; - console_locked = 1; - console_may_schedule = 1; -} -EXPORT_SYMBOL(console_lock); - -/** - * console_trylock - try to lock the console system for exclusive use. - * - * Tried to acquire a lock which guarantees that the caller has - * exclusive access to the console system and the console_drivers list. - * - * returns 1 on success, and 0 on failure to acquire the lock. - */ -int console_trylock(void) -{ - if (down_trylock(&console_sem)) - return 0; - if (console_suspended) { - up(&console_sem); - return 0; - } - console_locked = 1; - console_may_schedule = 0; - return 1; -} -EXPORT_SYMBOL(console_trylock); - -int is_console_locked(void) -{ - return console_locked; -} - /* * Delayed printk facility, for scheduler-internal messages: */ @@ -1008,157 +536,7 @@ void wake_up_klogd(void) this_cpu_or(printk_pending, PRINTK_PENDING_WAKEUP); } -/** - * console_unlock - unlock the console system - * - * Releases the console_lock which the caller holds on the console system - * and the console driver list. - * - * While the console_lock was held, console output may have been buffered - * by printk(). If this is the case, console_unlock(); emits - * the output prior to releasing the lock. - * - * If there is output waiting for klogd, we wake it up. - * - * console_unlock(); may be called from any context. - */ -void console_unlock(void) -{ - unsigned long flags; - unsigned _con_start, _log_end; - unsigned wake_klogd = 0, retry = 0; - - if (console_suspended) { - up(&console_sem); - return; - } - - console_may_schedule = 0; - -again: - for ( ; ; ) { - raw_spin_lock_irqsave(&logbuf_lock, flags); - wake_klogd |= log_start - log_end; - if (con_start == log_end) - break; /* Nothing to print */ - _con_start = con_start; - _log_end = log_end; - con_start = log_end; /* Flush */ - raw_spin_unlock(&logbuf_lock); - stop_critical_timings(); /* don't trace print latency */ - call_console_drivers(_con_start, _log_end); - start_critical_timings(); - local_irq_restore(flags); - } - console_locked = 0; - - /* Release the exclusive_console once it is used */ - if (unlikely(exclusive_console)) - exclusive_console = NULL; - - raw_spin_unlock(&logbuf_lock); - - up(&console_sem); - - /* - * Someone could have filled up the buffer again, so re-check if there's - * something to flush. In case we cannot trylock the console_sem again, - * there's a new owner and the console_unlock() from them will do the - * flush, no worries. - */ - raw_spin_lock(&logbuf_lock); - if (con_start != log_end) - retry = 1; - raw_spin_unlock_irqrestore(&logbuf_lock, flags); - - if (retry && console_trylock()) - goto again; - - if (wake_klogd) - wake_up_klogd(); -} -EXPORT_SYMBOL(console_unlock); - -/** - * console_conditional_schedule - yield the CPU if required - * - * If the console code is currently allowed to sleep, and - * if this CPU should yield the CPU to another task, do - * so here. - * - * Must be called within console_lock();. - */ -void __sched console_conditional_schedule(void) -{ - if (console_may_schedule) - cond_resched(); -} -EXPORT_SYMBOL(console_conditional_schedule); - -void console_unblank(void) -{ - struct console *c; - - /* - * console_unblank can no longer be called in interrupt context unless - * oops_in_progress is set to 1.. - */ - if (oops_in_progress) { - if (down_trylock(&console_sem) != 0) - return; - } else - console_lock(); - - console_locked = 1; - console_may_schedule = 0; - for_each_console(c) - if ((c->flags & CON_ENABLED) && c->unblank) - c->unblank(); - console_unlock(); -} - -/* - * Return the console tty driver structure and its associated index - */ -struct tty_driver *console_device(int *index) -{ - struct console *c; - struct tty_driver *driver = NULL; - - console_lock(); - for_each_console(c) { - if (!c->device) - continue; - driver = c->device(c, index); - if (driver) - break; - } - console_unlock(); - return driver; -} - -/* - * Prevent further output on the passed console device so that (for example) - * serial drivers can disable console output before suspending a port, and can - * re-enable output afterwards. - */ -void console_stop(struct console *console) -{ - console_lock(); - console->flags &= ~CON_ENABLED; - console_unlock(); -} -EXPORT_SYMBOL(console_stop); - -void console_start(struct console *console) -{ - console_lock(); - console->flags |= CON_ENABLED; - console_unlock(); -} -EXPORT_SYMBOL(console_start); - -static int __read_mostly keep_bootcon; +int __read_mostly keep_bootcon; static int __init keep_bootcon_setup(char *str) { @@ -1170,216 +548,6 @@ static int __init keep_bootcon_setup(char *str) early_param("keep_bootcon", keep_bootcon_setup); -/* - * The console driver calls this routine during kernel initialization - * to register the console printing procedure with printk() and to - * print any messages that were printed by the kernel before the - * console driver was initialized. - * - * This can happen pretty early during the boot process (because of - * early_printk) - sometimes before setup_arch() completes - be careful - * of what kernel features are used - they may not be initialised yet. - * - * There are two types of consoles - bootconsoles (early_printk) and - * "real" consoles (everything which is not a bootconsole) which are - * handled differently. - * - Any number of bootconsoles can be registered at any time. - * - As soon as a "real" console is registered, all bootconsoles - * will be unregistered automatically. - * - Once a "real" console is registered, any attempt to register a - * bootconsoles will be rejected - */ -void register_console(struct console *newcon) -{ - int i; - unsigned long flags; - struct console *bcon = NULL; - - /* - * before we register a new CON_BOOT console, make sure we don't - * already have a valid console - */ - if (console_drivers && newcon->flags & CON_BOOT) { - /* find the last or real console */ - for_each_console(bcon) { - if (!(bcon->flags & CON_BOOT)) { - printk(KERN_INFO "Too late to register bootconsole %s%d\n", - newcon->name, newcon->index); - return; - } - } - } - - if (console_drivers && console_drivers->flags & CON_BOOT) - bcon = console_drivers; - - if (preferred_console < 0 || bcon || !console_drivers) - preferred_console = selected_console; - - if (newcon->early_setup) - newcon->early_setup(); - - /* - * See if we want to use this console driver. If we - * didn't select a console we take the first one - * that registers here. - */ - if (preferred_console < 0) { - if (newcon->index < 0) - newcon->index = 0; - if (newcon->setup == NULL || - newcon->setup(newcon, NULL) == 0) { - newcon->flags |= CON_ENABLED; - if (newcon->device) { - newcon->flags |= CON_CONSDEV; - preferred_console = 0; - } - } - } - - /* - * See if this console matches one we selected on - * the command line. - */ - for (i = 0; i < MAX_CMDLINECONSOLES && console_cmdline[i].name[0]; - i++) { - if (strcmp(console_cmdline[i].name, newcon->name) != 0) - continue; - if (newcon->index >= 0 && - newcon->index != console_cmdline[i].index) - continue; - if (newcon->index < 0) - newcon->index = console_cmdline[i].index; -#ifdef CONFIG_A11Y_BRAILLE_CONSOLE - if (console_cmdline[i].brl_options) { - newcon->flags |= CON_BRL; - braille_register_console(newcon, - console_cmdline[i].index, - console_cmdline[i].options, - console_cmdline[i].brl_options); - return; - } -#endif - if (newcon->setup && - newcon->setup(newcon, console_cmdline[i].options) != 0) - break; - newcon->flags |= CON_ENABLED; - newcon->index = console_cmdline[i].index; - if (i == selected_console) { - newcon->flags |= CON_CONSDEV; - preferred_console = selected_console; - } - break; - } - - if (!(newcon->flags & CON_ENABLED)) - return; - - /* - * If we have a bootconsole, and are switching to a real console, - * don't print everything out again, since when the boot console, and - * the real console are the same physical device, it's annoying to - * see the beginning boot messages twice - */ - if (bcon && ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV)) - newcon->flags &= ~CON_PRINTBUFFER; - - /* - * Put this console in the list - keep the - * preferred driver at the head of the list. - */ - console_lock(); - if ((newcon->flags & CON_CONSDEV) || console_drivers == NULL) { - newcon->next = console_drivers; - console_drivers = newcon; - if (newcon->next) - newcon->next->flags &= ~CON_CONSDEV; - } else { - newcon->next = console_drivers->next; - console_drivers->next = newcon; - } - if (newcon->flags & CON_PRINTBUFFER) { - /* - * console_unlock(); will print out the buffered messages - * for us. - */ - raw_spin_lock_irqsave(&logbuf_lock, flags); - con_start = log_start; - raw_spin_unlock_irqrestore(&logbuf_lock, flags); - /* - * We're about to replay the log buffer. Only do this to the - * just-registered console to avoid excessive message spam to - * the already-registered consoles. - */ - exclusive_console = newcon; - } - console_unlock(); - console_sysfs_notify(); - - /* - * By unregistering the bootconsoles after we enable the real console - * we get the "console xxx enabled" message on all the consoles - - * boot consoles, real consoles, etc - this is to ensure that end - * users know there might be something in the kernel's log buffer that - * went to the bootconsole (that they do not see on the real console) - */ - if (bcon && - ((newcon->flags & (CON_CONSDEV | CON_BOOT)) == CON_CONSDEV) && - !keep_bootcon) { - /* we need to iterate through twice, to make sure we print - * everything out, before we unregister the console(s) - */ - printk(KERN_INFO "console [%s%d] enabled, bootconsole disabled\n", - newcon->name, newcon->index); - for_each_console(bcon) - if (bcon->flags & CON_BOOT) - unregister_console(bcon); - } else { - printk(KERN_INFO "%sconsole [%s%d] enabled\n", - (newcon->flags & CON_BOOT) ? "boot" : "" , - newcon->name, newcon->index); - } -} -EXPORT_SYMBOL(register_console); - -int unregister_console(struct console *console) -{ - struct console *a, *b; - int res = 1; - -#ifdef CONFIG_A11Y_BRAILLE_CONSOLE - if (console->flags & CON_BRL) - return braille_unregister_console(console); -#endif - - console_lock(); - if (console_drivers == console) { - console_drivers=console->next; - res = 0; - } else if (console_drivers) { - for (a=console_drivers->next, b=console_drivers ; - a; b=a, a=b->next) { - if (a == console) { - b->next = a->next; - res = 0; - break; - } - } - } - - /* - * If this isn't the last console and it has CON_CONSDEV set, we - * need to set it on the next preferred console. - */ - if (console_drivers != NULL && console->flags & CON_CONSDEV) - console_drivers->flags |= CON_CONSDEV; - - console_unlock(); - console_sysfs_notify(); - return res; -} -EXPORT_SYMBOL(unregister_console); - static int __init printk_late_init(void) { struct console *con; -- 1.7.8.111.gad25c.dirty -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/