Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1759248Ab2EPGoj (ORCPT ); Wed, 16 May 2012 02:44:39 -0400 Received: from mail-pb0-f46.google.com ([209.85.160.46]:46935 "EHLO mail-pb0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759218Ab2EPGn6 (ORCPT ); Wed, 16 May 2012 02:43:58 -0400 From: Magnus Damm To: linux-arm-kernel@lists.infradead.org Cc: linux@arm.linux.org.uk, arnd@arndb.de, linux-sh@vger.kernel.org, lethal@linux-sh.org, linux-kernel@vger.kernel.org, rjw@sisk.pl, horms@verge.net.au, olof@lixom.net, Magnus Damm Date: Wed, 16 May 2012 15:44:58 +0900 Message-Id: <20120516064458.32286.37948.sendpatchset@w520> In-Reply-To: <20120516064449.32286.77941.sendpatchset@w520> References: <20120516064449.32286.77941.sendpatchset@w520> Subject: [PATCH 01/08] mach-shmobile: Emma Mobile EV2 SoC base support V3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12841 Lines: 481 From: Magnus Damm This is V3 of the Emma Mobile EV2 SoC support. Included here is support for serial and timer devices which is just about enough to boot a kernel. Signed-off-by: Magnus Damm --- Changes since V2: - none, just bumped up version to match the V3 series Changes since V1: - use IOMEM(), ioremap() and iowrite32() for clock code - use built-in ioremap in shared sh clock code - break out function prototypes to a separate header - move gic code into setup-emev2.c - get rid of static io table Thanks to Arnd for his kind help! arch/arm/mach-shmobile/Kconfig | 5 arch/arm/mach-shmobile/Makefile | 1 arch/arm/mach-shmobile/clock-emev2.c | 226 +++++++++++++++++++++++++++ arch/arm/mach-shmobile/include/mach/emev2.h | 9 + arch/arm/mach-shmobile/setup-emev2.c | 180 +++++++++++++++++++++ 5 files changed, 421 insertions(+) --- 0003/arch/arm/mach-shmobile/Kconfig +++ work/arch/arm/mach-shmobile/Kconfig 2012-05-12 02:45:10.000000000 +0900 @@ -41,6 +41,11 @@ config ARCH_R8A7779 select ARM_GIC select ARCH_WANT_OPTIONAL_GPIOLIB +config ARCH_EMEV2 + bool "Emma Mobile EV2" + select CPU_V7 + select ARM_GIC + comment "SH-Mobile Board Type" config MACH_G3EVM --- 0001/arch/arm/mach-shmobile/Makefile +++ work/arch/arm/mach-shmobile/Makefile 2012-05-12 02:45:20.000000000 +0900 @@ -12,6 +12,7 @@ obj-$(CONFIG_ARCH_SH7372) += setup-sh737 obj-$(CONFIG_ARCH_SH73A0) += setup-sh73a0.o clock-sh73a0.o intc-sh73a0.o obj-$(CONFIG_ARCH_R8A7740) += setup-r8a7740.o clock-r8a7740.o intc-r8a7740.o obj-$(CONFIG_ARCH_R8A7779) += setup-r8a7779.o clock-r8a7779.o intc-r8a7779.o +obj-$(CONFIG_ARCH_EMEV2) += setup-emev2.o clock-emev2.o # SMP objects smp-y := platsmp.o headsmp.o --- /dev/null +++ work/arch/arm/mach-shmobile/clock-emev2.c 2012-05-12 02:44:44.000000000 +0900 @@ -0,0 +1,226 @@ +/* + * Emma Mobile EV2 clock framework support + * + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include + +#define EMEV2_SMU_BASE 0xe0110000 + +/* EMEV2 SMU registers */ +#define USIAU0_RSTCTRL 0x094 +#define USIBU1_RSTCTRL 0x0ac +#define USIBU2_RSTCTRL 0x0b0 +#define USIBU3_RSTCTRL 0x0b4 +#define STI_RSTCTRL 0x124 +#define USIAU0GCLKCTRL 0x4a0 +#define USIBU1GCLKCTRL 0x4b8 +#define USIBU2GCLKCTRL 0x4bc +#define USIBU3GCLKCTRL 0x04c0 +#define STIGCLKCTRL 0x528 +#define USIAU0SCLKDIV 0x61c +#define USIB2SCLKDIV 0x65c +#define USIB3SCLKDIV 0x660 +#define STI_CLKSEL 0x688 + +/* not pretty, but hey */ +static void __iomem *smu_base; + +static void emev2_smu_write(unsigned long value, int offs) +{ + BUG_ON(!smu_base || (offs >= PAGE_SIZE)); + iowrite32(value, smu_base + offs); +} + +static struct clk_mapping smu_mapping = { + .phys = EMEV2_SMU_BASE, + .len = PAGE_SIZE, +}; + +/* Fixed 32 KHz root clock from C32K pin */ +static struct clk c32k_clk = { + .rate = 32768, + .mapping = &smu_mapping, +}; + +/* PLL3 multiplies C32K with 7000 */ +static unsigned long pll3_recalc(struct clk *clk) +{ + return clk->parent->rate * 7000; +} + +static struct sh_clk_ops pll3_clk_ops = { + .recalc = pll3_recalc, +}; + +static struct clk pll3_clk = { + .ops = &pll3_clk_ops, + .parent = &c32k_clk, +}; + +static struct clk *main_clks[] = { + &c32k_clk, + &pll3_clk, +}; + +enum { SCLKDIV_USIAU0, SCLKDIV_USIBU2, SCLKDIV_USIBU1, SCLKDIV_USIBU3, + SCLKDIV_NR }; + +#define SCLKDIV(_reg, _shift) \ +{ \ + .parent = &pll3_clk, \ + .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ + .enable_bit = _shift, \ +} + +static struct clk sclkdiv_clks[SCLKDIV_NR] = { + [SCLKDIV_USIAU0] = SCLKDIV(USIAU0SCLKDIV, 0), + [SCLKDIV_USIBU2] = SCLKDIV(USIB2SCLKDIV, 16), + [SCLKDIV_USIBU1] = SCLKDIV(USIB2SCLKDIV, 0), + [SCLKDIV_USIBU3] = SCLKDIV(USIB3SCLKDIV, 0), +}; + +enum { GCLK_USIAU0_SCLK, GCLK_USIBU1_SCLK, GCLK_USIBU2_SCLK, GCLK_USIBU3_SCLK, + GCLK_STI_SCLK, + GCLK_NR }; + +#define GCLK_SCLK(_parent, _reg) \ +{ \ + .parent = _parent, \ + .enable_reg = IOMEM(EMEV2_SMU_BASE + (_reg)), \ + .enable_bit = 1, /* SCLK_GCC */ \ +} + +static struct clk gclk_clks[GCLK_NR] = { + [GCLK_USIAU0_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIAU0], + USIAU0GCLKCTRL), + [GCLK_USIBU1_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU1], + USIBU1GCLKCTRL), + [GCLK_USIBU2_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU2], + USIBU2GCLKCTRL), + [GCLK_USIBU3_SCLK] = GCLK_SCLK(&sclkdiv_clks[SCLKDIV_USIBU3], + USIBU3GCLKCTRL), + [GCLK_STI_SCLK] = GCLK_SCLK(&c32k_clk, STIGCLKCTRL), +}; + +static int emev2_gclk_enable(struct clk *clk) +{ + iowrite32(ioread32(clk->mapped_reg) | (1 << clk->enable_bit), + clk->mapped_reg); + return 0; +} + +static void emev2_gclk_disable(struct clk *clk) +{ + iowrite32(ioread32(clk->mapped_reg) & ~(1 << clk->enable_bit), + clk->mapped_reg); +} + +static struct sh_clk_ops emev2_gclk_clk_ops = { + .enable = emev2_gclk_enable, + .disable = emev2_gclk_disable, + .recalc = followparent_recalc, +}; + +static int __init emev2_gclk_register(struct clk *clks, int nr) +{ + struct clk *clkp; + int ret = 0; + int k; + + for (k = 0; !ret && (k < nr); k++) { + clkp = clks + k; + clkp->ops = &emev2_gclk_clk_ops; + ret |= clk_register(clkp); + } + + return ret; +} + +static unsigned long emev2_sclkdiv_recalc(struct clk *clk) +{ + unsigned int sclk_div; + + sclk_div = (ioread32(clk->mapped_reg) >> clk->enable_bit) & 0xff; + + return clk->parent->rate / (sclk_div + 1); +} + +static struct sh_clk_ops emev2_sclkdiv_clk_ops = { + .recalc = emev2_sclkdiv_recalc, +}; + +static int __init emev2_sclkdiv_register(struct clk *clks, int nr) +{ + struct clk *clkp; + int ret = 0; + int k; + + for (k = 0; !ret && (k < nr); k++) { + clkp = clks + k; + clkp->ops = &emev2_sclkdiv_clk_ops; + ret |= clk_register(clkp); + } + + return ret; +} + +static struct clk_lookup lookups[] = { + CLKDEV_DEV_ID("serial8250-em.0", &gclk_clks[GCLK_USIAU0_SCLK]), + CLKDEV_DEV_ID("serial8250-em.1", &gclk_clks[GCLK_USIBU1_SCLK]), + CLKDEV_DEV_ID("serial8250-em.2", &gclk_clks[GCLK_USIBU2_SCLK]), + CLKDEV_DEV_ID("serial8250-em.3", &gclk_clks[GCLK_USIBU3_SCLK]), + CLKDEV_DEV_ID("em_sti.0", &gclk_clks[GCLK_STI_SCLK]), +}; + +void __init emev2_clock_init(void) +{ + int k, ret = 0; + + smu_base = ioremap(EMEV2_SMU_BASE, PAGE_SIZE); + BUG_ON(!smu_base); + + /* setup STI timer to run on 37.768 kHz and deassert reset */ + emev2_smu_write(0, STI_CLKSEL); + emev2_smu_write(1, STI_RSTCTRL); + + /* deassert reset for UART0->UART3 */ + emev2_smu_write(2, USIAU0_RSTCTRL); + emev2_smu_write(2, USIBU1_RSTCTRL); + emev2_smu_write(2, USIBU2_RSTCTRL); + emev2_smu_write(2, USIBU3_RSTCTRL); + + for (k = 0; !ret && (k < ARRAY_SIZE(main_clks)); k++) + ret = clk_register(main_clks[k]); + + if (!ret) + ret = emev2_sclkdiv_register(sclkdiv_clks, SCLKDIV_NR); + + if (!ret) + ret = emev2_gclk_register(gclk_clks, GCLK_NR); + + clkdev_add_table(lookups, ARRAY_SIZE(lookups)); + + if (!ret) + shmobile_clk_init(); + else + panic("failed to setup emev2 clocks\n"); +} --- /dev/null +++ work/arch/arm/mach-shmobile/include/mach/emev2.h 2012-05-12 02:44:44.000000000 +0900 @@ -0,0 +1,9 @@ +#ifndef __ASM_EMEV2_H__ +#define __ASM_EMEV2_H__ + +extern void emev2_init_irq(void); +extern void emev2_add_early_devices(void); +extern void emev2_add_standard_devices(void); +extern void emev2_clock_init(void); + +#endif /* __ASM_EMEV2_H__ */ --- /dev/null +++ work/arch/arm/mach-shmobile/setup-emev2.c 2012-05-12 02:44:44.000000000 +0900 @@ -0,0 +1,180 @@ +/* + * Emma Mobile EV2 processor support + * + * Copyright (C) 2012 Magnus Damm + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +/* UART */ +static struct resource uart0_resources[] = { + [0] = { + .start = 0xe1020000, + .end = 0xe1020037, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 40, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device uart0_device = { + .name = "serial8250-em", + .id = 0, + .num_resources = ARRAY_SIZE(uart0_resources), + .resource = uart0_resources, +}; + +static struct resource uart1_resources[] = { + [0] = { + .start = 0xe1030000, + .end = 0xe1030037, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 41, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device uart1_device = { + .name = "serial8250-em", + .id = 1, + .num_resources = ARRAY_SIZE(uart1_resources), + .resource = uart1_resources, +}; + +static struct resource uart2_resources[] = { + [0] = { + .start = 0xe1040000, + .end = 0xe1040037, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 42, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device uart2_device = { + .name = "serial8250-em", + .id = 2, + .num_resources = ARRAY_SIZE(uart2_resources), + .resource = uart2_resources, +}; + +static struct resource uart3_resources[] = { + [0] = { + .start = 0xe1050000, + .end = 0xe1050037, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 43, + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device uart3_device = { + .name = "serial8250-em", + .id = 3, + .num_resources = ARRAY_SIZE(uart3_resources), + .resource = uart3_resources, +}; + +/* STI */ +static struct resource sti_resources[] = { + [0] = { + .name = "STI", + .start = 0xe0180000, + .end = 0xe0180053, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = 157, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device sti_device = { + .name = "em_sti", + .id = 0, + .resource = sti_resources, + .num_resources = ARRAY_SIZE(sti_resources), +}; + +static struct platform_device *emev2_early_devices[] __initdata = { + &uart0_device, + &uart1_device, + &uart2_device, + &uart3_device, +}; + +static struct platform_device *emev2_late_devices[] __initdata = { + &sti_device, +}; + +void __init emev2_add_standard_devices(void) +{ + emev2_clock_init(); + + platform_add_devices(emev2_early_devices, + ARRAY_SIZE(emev2_early_devices)); + + platform_add_devices(emev2_late_devices, + ARRAY_SIZE(emev2_late_devices)); +} + +void __init emev2_add_early_devices(void) +{ + shmobile_setup_delay(533, 1, 3); /* Cortex-A9 @ 533MHz */ + + early_platform_add_devices(emev2_early_devices, + ARRAY_SIZE(emev2_early_devices)); + + /* setup early console here as well */ + shmobile_setup_console(); +} + +void __init emev2_init_irq(void) +{ + void __iomem *gic_dist_base; + void __iomem *gic_cpu_base; + + /* Static mappings, never released */ + gic_dist_base = ioremap(0xe0028000, PAGE_SIZE); + gic_cpu_base = ioremap(0xe0020000, PAGE_SIZE); + BUG_ON(!gic_dist_base || !gic_cpu_base); + + /* Use GIC to handle interrupts */ + gic_init(0, 29, gic_dist_base, gic_cpu_base); +} -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/