Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752684Ab2ETTpb (ORCPT ); Sun, 20 May 2012 15:45:31 -0400 Received: from 212.199.104.198.static.012.net.il ([212.199.104.198]:5522 "EHLO lx-merez.qi.qualcomm.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1751609Ab2ETTp2 (ORCPT ); Sun, 20 May 2012 15:45:28 -0400 From: Maya Erez To: linux-mmc@vger.kernel.org Cc: linux-arm-msm@vger.kernel.org, Maya Erez , linux-doc@vger.kernel.org (open list:DOCUMENTATION), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v1 1/1] block: Add test-iosched scheduler Date: Sun, 20 May 2012 22:40:31 +0300 Message-Id: <1337542832-19810-2-git-send-email-merez@codeaurora.org> X-Mailer: git-send-email 1.7.3.3 In-Reply-To: <1337542832-19810-1-git-send-email-merez@codeaurora.org> References: <1337542832-19810-1-git-send-email-merez@codeaurora.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 29427 Lines: 1089 The test scheduler allows testing a block device by dispatching specific requests according to the test case and declare PASS/FAIL according to the requests completion error code Signed-off-by: Maya Erez --- Documentation/block/test-iosched.txt | 32 ++ block/Kconfig.iosched | 8 + block/Makefile | 1 + block/blk-core.c | 4 +- block/test-iosched.c | 966 ++++++++++++++++++++++++++++++++++ 5 files changed, 1010 insertions(+), 1 deletions(-) create mode 100644 Documentation/block/test-iosched.txt create mode 100644 block/test-iosched.c diff --git a/Documentation/block/test-iosched.txt b/Documentation/block/test-iosched.txt new file mode 100644 index 0000000..b86eb8d --- /dev/null +++ b/Documentation/block/test-iosched.txt @@ -0,0 +1,32 @@ +Test IO scheduler +================== + +The test scheduler allows to test the a block device by dispatching +specific requests according to the test case and declare PASS/FAIL +according to the requests completion error code. + +Each test is exposed via debugfs and can be triggered by writing to +the debugfs file. In order to add a new test one should expose a new debugfs +file for the new test. + +The test IO scheduler includes the no-op scheduler operations, and uses +them in order to dispatch the non-test requests when no test is running. +This will allow to keep a normal FS operation in parallel to the test +capability. +The test IO sceduler keeps two different queues, one for non-test requests +(inserted by the FS) and the other for test requests. +The test IO scheduler chooses the queue for dispatch requests according to the +test state (IDLE/RUNNING). + +the test IO scheduler is compiled by default as a dynamic module and enabled +only if CONFIG_DEBUG_FS is defined. + +Selecting IO schedulers +----------------------- +Refer to Documentation/block/switching-sched.txt for information on +selecting an io scheduler on a per-device basis. + + +May 10 2012, maya Erez + + diff --git a/block/Kconfig.iosched b/block/Kconfig.iosched index 421bef9..34a1f9e 100644 --- a/block/Kconfig.iosched +++ b/block/Kconfig.iosched @@ -12,6 +12,14 @@ config IOSCHED_NOOP that do their own scheduling and require only minimal assistance from the kernel. +config IOSCHED_TEST + tristate "Test I/O scheduler" + depends on DEBUG_FS + default m + ---help--- + The test I/O scheduler is duplicate of the noop scheduler with + test ability. + config IOSCHED_DEADLINE tristate "Deadline I/O scheduler" default y diff --git a/block/Makefile b/block/Makefile index 39b76ba..436b220 100644 --- a/block/Makefile +++ b/block/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_BLK_DEV_THROTTLING) += blk-throttle.o obj-$(CONFIG_IOSCHED_NOOP) += noop-iosched.o obj-$(CONFIG_IOSCHED_DEADLINE) += deadline-iosched.o obj-$(CONFIG_IOSCHED_CFQ) += cfq-iosched.o +obj-$(CONFIG_IOSCHED_TEST) += test-iosched.o obj-$(CONFIG_BLOCK_COMPAT) += compat_ioctl.o obj-$(CONFIG_BLK_DEV_INTEGRITY) += blk-integrity.o diff --git a/block/blk-core.c b/block/blk-core.c index 3c923a7..a789a98 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1072,7 +1072,8 @@ struct request *blk_get_request(struct request_queue *q, int rw, gfp_t gfp_mask) { struct request *rq; - BUG_ON(rw != READ && rw != WRITE); + if (unlikely(test_bit(QUEUE_FLAG_DEAD, &q->queue_flags))) + return NULL; spin_lock_irq(q->queue_lock); if (gfp_mask & __GFP_WAIT) @@ -1406,6 +1407,7 @@ void init_request_from_bio(struct request *req, struct bio *bio) req->ioprio = bio_prio(bio); blk_rq_bio_prep(req->q, req, bio); } +EXPORT_SYMBOL(init_request_from_bio); void blk_queue_bio(struct request_queue *q, struct bio *bio) { diff --git a/block/test-iosched.c b/block/test-iosched.c new file mode 100644 index 0000000..e856a51 --- /dev/null +++ b/block/test-iosched.c @@ -0,0 +1,966 @@ + +/* Copyright (c) 2012, Code Aurora Forum. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * The test scheduler allows to test the block device by dispatching + * specific requests according to the test case and declare PASS/FAIL + * according to the requests completion error code. + * Each test is exposed via debugfs and can be triggered by writing to + * the debugfs file. + * + */ + +/* + * elevator test iosched + */ +#include +#include +#include +#include +#include +#include +#include +#include "blk.h" + +#define MODULE_NAME "test-iosched" +#define MAX_STR_SIZE 10 +#define BIO_U32_SIZE 1024 +#define TEST_PATTERN_SEQUENTIAL -1 +#define TEST_PATTERN_5A 0x5A5A5A5A +#define TEST_PATTERN_FF 0xFFFFFFFF +#define TEST_NO_PATTERN 0xDEADBEEF +#define WR_RD_START_REQ_ID 1234 +#define UNIQUE_START_REQ_ID 5678 +#define TIMEOUT_TIMER_MS 20000 + +#define test_pr_debug(fmt, args...) pr_debug("%s: "fmt"\n", MODULE_NAME, args) +#define test_pr_info(fmt, args...) pr_info("%s: "fmt"\n", MODULE_NAME, args) +#define test_pr_err(fmt, args...) pr_err("%s: "fmt"\n", MODULE_NAME, args) + +enum test_results { + TEST_NO_RESULT, + TEST_FAILED, + TEST_PASSED, +}; + +enum test_testcases { + NO_TEST = 0, + /* An example test that sends write, read and flush requests */ + TEST_WRITE_READ_FLUSH, +}; + +enum test_state { + TEST_IDLE, + TEST_RUNNING, + TEST_COMPLETED, +}; + +enum req_unique_type { + REQ_UNIQUE_NONE, + /* REQ_DISCARD request */ + REQ_UNIQUE_DISCARD, + /* REQ_FLUSH request */ + REQ_UNIQUE_FLUSH, +}; + +struct test_debug { + struct dentry *debug_root; + struct dentry *debug_test_result; + struct dentry *write_read_flush_test; + struct dentry *start_sector; +}; + +struct test_request { + /* The test requests list */ + struct list_head queuelist; + /* Write/read requests data buffer */ + unsigned int *bios_buffer; + /* Write/read requests data buffer size (in bytes) */ + int buf_size; + /* A block request, to be dispatched */ + struct request *rq; + /* A flag to indicate if the request was completed */ + bool req_completed; + /* Keeps the error code received in the request completion callback */ + int req_result; + /* + * A flag to indicate if the request should fail + */ + int is_err_expected; + /* + * A pattern written to the write data buffer. + * Can be used in read requests to verify the data + */ + int wr_rd_data_pattern; + /* + * A unique ID to identify a test request to ease the debugging of + * the test cases + */ + int req_id; +}; + +struct test_data { + /* The test IO scheduler requests list */ + struct list_head queue; + /* The test requests list */ + struct list_head test_queue; + /* + * Points to the next request to be dispatched from the test requests + * list + */ + struct test_request *next_req; + /* The current running test case */ + int testcase; + /* A wait queue for waiting for the test requests completion */ + wait_queue_head_t wait_q; + /* Indicates if there is a running test. Used for dispatch function */ + enum test_state test_state; + /* Indicates if the test passed or failed */ + enum test_results test_result; + /* The test debugfs entries */ + struct test_debug debug; + /* The block layer request queue */ + struct request_queue *req_q; + /* + * The number of write BIOs added to the test requests. + * Used to calcualte the sector number of new BIOs. + */ + int num_of_write_bios; + /* The address of the first sector that can be accessed by the test */ + u32 start_sector; + /* + * A timer to verify test completion in case of non-completed + * requests + */ + struct timer_list timeout_timer; + /* + * A unique ID to identify WRITE/READ request to ease the debugging of + * the test cases + */ + int wr_rd_next_req_id; + + /* + * A unique ID to identify FLUSH/DISCARD/SANITIZE request to ease the + * debugging of the test cases + */ + int unique_next_req_id; +}; + +static struct test_data *ptd; + +/* + * Get the request after `test_rq' in the test requests list + */ +static struct test_request * +latter_test_request(struct request_queue *q, + struct test_request *test_rq) +{ + struct test_data *td = q->elevator->elevator_data; + + if (test_rq->queuelist.next == &td->test_queue) + return NULL; + return list_entry(test_rq->queuelist.next, struct test_request, + queuelist); +} + +/* + * Check if all the queued test requests were completed. + */ +static void check_test_completion(void) +{ + struct test_request *test_rq; + struct request *rq; + + list_for_each_entry(test_rq, &ptd->test_queue, queuelist) { + rq = test_rq->rq; + if (!test_rq->req_completed) + return; + } + + test_pr_info("%s: Test is completed", __func__); + ptd->test_state = TEST_COMPLETED; + wake_up(&ptd->wait_q); +} + +/* + * A callback to be called per bio completion. + * Frees the bio memory. + */ +static void end_test_bio(struct bio *bio, int err) +{ + if (err) + clear_bit(BIO_UPTODATE, &bio->bi_flags); + + bio_put(bio); +} + +/* + * A callback to be called per request completion. + * the request memory is not freed here, will be freed later after the test + * results checking. + */ +static void end_test_req(struct request *rq, int err) +{ + struct test_request *test_rq; + + test_rq = (struct test_request *)rq->elv.priv[0]; + BUG_ON(!test_rq); + + test_pr_info("%s: request %d completed, err=%d", + __func__, test_rq->req_id, err); + + test_rq->req_completed = 1; + test_rq->req_result = err; + + check_test_completion(); +} + +/* + * Create and queue a non read/write request (such as FLUSH/DISCRAD/SANITIZE). + */ +static int add_unique_test_req(struct test_data *td, + int is_err_expcted, + enum req_unique_type req_unique, + int start_sec, int nr_sects) +{ + struct bio *bio; + struct request *rq; + int rw_flags; + struct test_request *test_rq; + + bio = bio_alloc(GFP_KERNEL, 0); + if (!bio) { + test_pr_err("%s: Failed to allocate a bio", __func__); + return -ENODEV; + } + bio_get(bio); + bio->bi_end_io = end_test_bio; + + switch (req_unique) { + case REQ_UNIQUE_FLUSH: + bio->bi_rw = WRITE_FLUSH; + break; + case REQ_UNIQUE_DISCARD: + bio->bi_rw = REQ_WRITE | REQ_DISCARD; + bio->bi_size = nr_sects << 9; + bio->bi_sector = start_sec; + break; + default: + test_pr_err("%s: Invalid request type %d", __func__, + req_unique); + bio_put(bio); + return -ENODEV; + } + + rw_flags = bio_data_dir(bio); + if (bio->bi_rw & REQ_SYNC) + rw_flags |= REQ_SYNC; + + rq = blk_get_request(td->req_q, rw_flags, GFP_KERNEL); + if (!rq) { + test_pr_err("%s: Failed to allocate a request", __func__); + bio_put(bio); + return -ENODEV; + } + + init_request_from_bio(rq, bio); + rq->end_io = end_test_req; + + test_rq = kzalloc(sizeof(struct test_request), GFP_KERNEL); + if (!test_rq) { + test_pr_err("%s: Failed to allocate a test request", __func__); + bio_put(bio); + blk_put_request(rq); + return -ENODEV; + } + test_rq->req_completed = 0; + test_rq->req_result = -1; + test_rq->rq = rq; + test_rq->is_err_expected = is_err_expcted; + rq->elv.priv[0] = (void *)test_rq; + test_rq->req_id = ++td->unique_next_req_id; + + test_pr_info("%s: added request %d to the test requests " + "list, Request type = %d", + __func__, test_rq->req_id, req_unique); + + list_add_tail(&test_rq->queuelist, &td->test_queue); + + return 0; +} + +/* + * Get a pattern to be filled in the request data buffer. + * If the pattern used is (-1) the buffer will be filled with sequential + * numbers + */ +static void fill_buf_with_pattern(int *buf, int num_bytes, int pattern) +{ + int i = 0; + int num_of_dwords = num_bytes/sizeof(int); + + if (pattern == TEST_NO_PATTERN) + return; + + /* num_bytes should be aligned to sizeof(int) */ + BUG_ON((num_bytes % sizeof(int)) != 0); + + if (pattern == TEST_PATTERN_SEQUENTIAL) { + for (i = 0; i < num_of_dwords; i++) + buf[i] = i; + } else { + for (i = 0; i < num_of_dwords; i++) + buf[i] = pattern; + } +} + +/* + * Create and queue a read/write request. + * This function allocates the test request and the block request and calls + * blk_rq_map_kern which allocates the required BIO. + * The allocated test request and the block request memory is freed at the + * end of the test and the allocated BIO memory is freed by end_test_bio. + * + * In case of WRITE request, the given pattern is written into the data + * buffer. In case of READ request, the given pattern is kept as the expected + * pattern. The expected pattern will be compared in the test check result + * function. + * If no comparisson is required, set pattern to TEST_NO_PATTERN. + */ +static int add_wr_rd_test_req(struct test_data *td, + int is_err_expcted, + int direction, int start_sec, + int num_bios, int pattern) +{ + struct request *rq = NULL; + struct test_request *test_rq = NULL; + int rw_flags = 0; + int buf_size = 0; + int ret = 0, i = 0; + unsigned int *bio_ptr = NULL; + struct bio *bio = NULL; + + rw_flags = direction; + + rq = blk_get_request(td->req_q, rw_flags, GFP_KERNEL); + if (!rq) { + test_pr_err("%s: Failed to allocate a request", __func__); + return -ENODEV; + } + + test_rq = kzalloc(sizeof(struct test_request), GFP_KERNEL); + if (!test_rq) { + test_pr_err("%s: Failed to allocate test request", __func__); + blk_put_request(rq); + return -ENODEV; + } + + buf_size = sizeof(unsigned int)*BIO_U32_SIZE*num_bios; + test_rq->bios_buffer = kzalloc(buf_size, GFP_KERNEL); + if (!test_rq->bios_buffer) { + test_pr_err("%s: Failed to allocate the data buf", __func__); + goto err; + } + test_rq->buf_size = buf_size; + + if (direction == WRITE) + fill_buf_with_pattern(test_rq->bios_buffer, + buf_size, pattern); + test_rq->wr_rd_data_pattern = pattern; + + bio_ptr = test_rq->bios_buffer; + for (i = 0; i < num_bios; ++i) { + ret = blk_rq_map_kern(td->req_q, rq, + (void *)bio_ptr, + sizeof(unsigned int)*BIO_U32_SIZE, + GFP_KERNEL); + if (ret) { + test_pr_err("%s: blk_rq_map_kern returned error %d", + __func__, ret); + goto err; + } + bio_ptr += BIO_U32_SIZE; + } + + rq->end_io = end_test_req; + rq->__sector = start_sec; + rq->cmd_type |= REQ_TYPE_FS; + + if (rq->bio) { + rq->bio->bi_sector = start_sec; + rq->bio->bi_end_io = end_test_bio; + bio = rq->bio; + while ((bio = bio->bi_next) != NULL) + bio->bi_end_io = end_test_bio; + } else + test_pr_err("%s: NULL bio!!!!!", __func__); + + td->num_of_write_bios += num_bios; + test_rq->req_id = ++td->wr_rd_next_req_id; + + test_rq->req_completed = 0; + test_rq->req_result = -1; + test_rq->rq = rq; + test_rq->is_err_expected = is_err_expcted; + rq->elv.priv[0] = (void *)test_rq; + + test_pr_info("%s: added request %d to the test requests list, " + "buf_size=%d", __func__, test_rq->req_id, buf_size); + + list_add_tail(&test_rq->queuelist, &td->test_queue); + + return 0; +err: + blk_put_request(rq); + kfree(test_rq->bios_buffer); + return -ENODEV; +} + +/* + * Used by each test to add pass/fail checking that are specific to the test. + */ +static int check_testcase_result(struct test_data *td) +{ + switch (td->testcase) { + /* To be added by the specific tests per need */ + default: + break; + } + return 0; +} + +/* + * Verify that the test request data buffer includes the expected + * pattern. + */ +static int compare_buffer_to_pattern(struct test_request *test_rq) +{ + int i = 0; + int num_of_dwords = test_rq->buf_size/sizeof(int); + + /* num_bytes should be aligned to sizeof(int) */ + BUG_ON((test_rq->buf_size % sizeof(int)) != 0); + BUG_ON(test_rq->bios_buffer == NULL); + + if (test_rq->wr_rd_data_pattern == TEST_NO_PATTERN) + return 0; + + if (test_rq->wr_rd_data_pattern == TEST_PATTERN_SEQUENTIAL) { + for (i = 0; i < num_of_dwords; i++) { + if (test_rq->bios_buffer[i] != i) { + test_pr_err("%s: expected " + "pattern (0x%x) != read pattern (0x%x)" + " in index %d", __func__, + test_rq->wr_rd_data_pattern, + test_rq->bios_buffer[i], i); + return -EINVAL; + } + } + } else { + for (i = 0; i < num_of_dwords; i++) { + if (test_rq->bios_buffer[i] != + test_rq->wr_rd_data_pattern) { + test_pr_err("%s: expected " + "pattern (0x%x) != read pattern (0x%x)" + " in index %d", __func__, + test_rq->wr_rd_data_pattern, + test_rq->bios_buffer[i], i); + return -EINVAL; + } + } + } + + return 0; +} + +/* + * Determine if the test passed or failed. + * The function checks the test request completion value and calls + * check_testcase_result for result checking that are specific + * to a test case. + */ +static void check_test_result(struct test_data *td) +{ + struct test_request *test_rq; + struct request *rq; + int res = 0; + + list_for_each_entry(test_rq, &ptd->test_queue, queuelist) { + rq = test_rq->rq; + if (!test_rq->req_completed) { + test_pr_err("%s: rq %d not completed, " + "Test FAILED", __func__, test_rq->req_id); + td->test_result = TEST_FAILED; + return; + } + + if ((test_rq->req_result < 0) && !test_rq->is_err_expected) { + test_pr_err("%s: rq %d completed with err, not as " + "expected, Test FAILED", __func__, + test_rq->req_id); + td->test_result = TEST_FAILED; + return; + } + if ((test_rq->req_result == 0) && test_rq->is_err_expected) { + test_pr_err("%s: rq %d succeeded, not as expected, " + "Test FAILED", __func__, test_rq->req_id); + td->test_result = TEST_FAILED; + return; + } + if (rq_data_dir(test_rq->rq) == READ) { + res = compare_buffer_to_pattern(test_rq); + if (res) { + test_pr_err("%s: read request %d" + "pattern not as expected 0x%x, Test FAILED", + __func__, test_rq->req_id, + test_rq->wr_rd_data_pattern); + td->test_result = TEST_FAILED; + return; + } + } + } + + if (check_testcase_result(td)) { + test_pr_err("%s: Test FAILED", __func__); + td->test_result = TEST_FAILED; + return; + } + + test_pr_info("%s: Test PASSED", __func__); + td->test_result = TEST_PASSED; +} + +/* + * Create and queue the required requests for the write_read_flush test. + */ +static int prepare_write_read_flush(struct test_data *td) +{ + int ret = 0; + + ret = add_wr_rd_test_req(td, 0, WRITE, td->start_sector, + 3, TEST_PATTERN_5A); + if (ret) { + test_pr_err("%s: failed to add a write request", __func__); + return ret; + } + ret = add_wr_rd_test_req(td, 0, READ, td->start_sector, 3, + TEST_PATTERN_5A); + if (ret) { + test_pr_err("%s: failed to add a read request", __func__); + return ret; + } + ret = add_unique_test_req(td, 0, REQ_UNIQUE_FLUSH, + td->start_sector, 0); + if (ret) { + test_pr_err("%s: failed to add a flush request", __func__); + return ret; + } + return 0; +} + +/* + * Create and queue the required requests according to the test case. + */ +static int prepare_test(struct test_data *td) +{ + switch (td->testcase) { + case TEST_WRITE_READ_FLUSH: + return prepare_write_read_flush(td); + break; + default: + test_pr_info("%s: Invalid test case...", __func__); + break; + } + return 0; +} + +/* + * Free the allocated test requests, their requests and BIOs buffer. + */ +static void free_test_requests(struct test_data *td) +{ + struct test_request *test_rq; + while (!list_empty(&td->test_queue)) { + test_rq = list_entry(td->test_queue.next, struct test_request, + queuelist); + list_del_init(&test_rq->queuelist); + blk_put_request(test_rq->rq); + kfree(test_rq->bios_buffer); + kfree(test_rq); + } +} + +/* + * The timer verifies that the test will be completed even if we don't get + * the completion callback for all the requests. + */ +static void test_timeout_handler(unsigned long data) +{ + struct test_data *td = (struct test_data *)data; + + test_pr_info("%s: TIMEOUT timer expired", __func__); + td->test_state = TEST_COMPLETED; + wake_up(&td->wait_q); + return; +} + +/* + * The main function that prepares and runs the test. The function also checks + * the test result upon test completion. + */ +static int start_test(struct test_data *td) +{ + int ret = 0; + + test_pr_info("%s: : ------------------ Starting testcase %d" + "------------------\n", __func__, td->testcase); + + td->next_req = NULL; + td->test_result = TEST_NO_RESULT; + td->num_of_write_bios = 0; + + td->unique_next_req_id = UNIQUE_START_REQ_ID; + td->wr_rd_next_req_id = WR_RD_START_REQ_ID; + + td->test_state = TEST_RUNNING; + + ret = prepare_test(td); + if (ret) { + test_pr_err("%s: failed to prepare the test\n", __func__); + td->test_result = TEST_FAILED; + td->testcase = NO_TEST; + free_test_requests(td); + return ret; + } + + mod_timer(&td->timeout_timer, jiffies + + msecs_to_jiffies(TIMEOUT_TIMER_MS)); + + /* + * Set the next_req pointer to the first request in the test requests + * list + */ + td->next_req = list_entry(td->test_queue.next, struct test_request, + queuelist); + + __blk_run_queue(td->req_q); + + test_pr_info("%s: Waiting for the test completion", __func__); + + wait_event(td->wait_q, td->test_state == TEST_COMPLETED); + del_timer_sync(&td->timeout_timer); + + check_test_result(td); + + td->testcase = NO_TEST; + td->test_state = TEST_IDLE; + + free_test_requests(td); + + /* + * Wakeup the queue thread to fetch FS requests that might got + * postponded due to the test + */ + __blk_run_queue(td->req_q); + + if (td->test_result == TEST_PASSED) + return 0; + else + return -EINVAL; +} + +static bool message_repeat; +static int test_open(struct inode *inode, struct file *file) +{ + file->private_data = inode->i_private; + message_repeat = 1; + return 0; +} + +/* write_read_flush TEST - An example test scenario. */ +static ssize_t write_read_flush_test_write(struct file *file, + const char __user *buf, + size_t count, + loff_t *ppos) +{ + int ret = 0; + int i = 0; + int number = -1; + + test_pr_info("%s: -- write_read_flush TEST --", __func__); + + if (ptd->start_sector == 0) { + test_pr_err("%s: Invalid start sector\n. " + "User should set the start sector before running the " + "test using this command:\n" + "echo > " + "//test-iosched/start_sector", + __func__); + ptd->test_result = TEST_FAILED; + return count; + } + + sscanf(buf, "%d", &number); + + if (number < 0) { + test_pr_err("%s: failed to extract number %d", __func__, + number); + ptd->test_result = TEST_FAILED; + return count; + } + + for (i = 0; i < number; ++i) { + test_pr_info("%s: Cycle # %d / %d", __func__, i+1, number); + test_pr_info("%s: ===================", __func__); + + + ptd->testcase = TEST_WRITE_READ_FLUSH; + ret = start_test(ptd); + if (ret) + break; + } + + return count; +} + +static ssize_t write_read_flush_test_read(struct file *file, + char __user *buffer, + size_t count, + loff_t *offset) +{ + memset((void *)buffer, 0, count); + + snprintf(buffer, count, + "\nwrite_read_flush_test\n========================\n" + "Description:\nThis is an example test." + "This test sends a write request followed by a read request\n" + "and verifies the read data.\n" + "The test also checks a flush request\n"); + + if (message_repeat == 1) { + message_repeat = 0; + return strnlen(buffer, count); + } + + return 0; +} + +const struct file_operations write_read_flush_test_ops = { + .open = test_open, + .write = write_read_flush_test_write, + .read = write_read_flush_test_read, +}; + +static int test_debugfs_init(struct test_data *td) +{ + td->debug.debug_root = debugfs_create_dir("test-iosched", NULL); + if (!td->debug.debug_root) + return -ENOENT; + + td->debug.debug_test_result = debugfs_create_u32( + "test_result", + S_IRUGO | S_IWUGO, + td->debug.debug_root, + &td->test_result); + + td->debug.write_read_flush_test = + debugfs_create_file("write_read_flush_test", + S_IRUGO | S_IWUGO, + td->debug.debug_root, + NULL, + &write_read_flush_test_ops); + + td->debug.start_sector = debugfs_create_u32( + "start_sector", + S_IRUGO | S_IWUGO, + td->debug.debug_root, + &td->start_sector); + + return 0; +} + +static void test_debugfs_cleanup(struct test_data *td) +{ + debugfs_remove(td->debug.debug_test_result); + debugfs_remove(td->debug.write_read_flush_test); + debugfs_remove(td->debug.start_sector); + debugfs_remove(td->debug.debug_root); +} + +static void print_req(struct request *req) +{ + struct bio *bio; + struct test_request *test_rq; + + if (!req) + return; + + test_rq = (struct test_request *)req->elv.priv[0]; + + if (test_rq) { + test_pr_debug("%s: Dispatch request %d: " + "__data_len=0x%x, __sector=0x%lx, atomic_flags=0x%lx, " + "cmd_flags=0x%x, cmd_len=0x%x, cmd_type=0x%x, " + "nr_phys_segments=%d, num_of_sectors=%d", + __func__, test_rq->req_id, req->__data_len, + (unsigned long)req->__sector, + req->atomic_flags, req->cmd_flags, req->cmd_len, + req->cmd_type, req->nr_phys_segments, + blk_rq_sectors(req)); + bio = req->bio; + test_pr_debug("%s: bio: bi_size=%d, " + "bi_sector=0x%lx", __func__, bio->bi_size, + (unsigned long)bio->bi_sector); + while ((bio = bio->bi_next) != NULL) { + test_pr_debug("%s: bio: bi_size=%d, " + "bi_sector=0x%lx", __func__, bio->bi_size, + (unsigned long)bio->bi_sector); + } + } +} + +static void test_merged_requests(struct request_queue *q, + struct request *rq, struct request *next) +{ + list_del_init(&next->queuelist); +} + +/* + * Dispatch a test request in case there is a running test Otherwise, dispatch + * a request that was queued by the FS to keep the card functional. + */ +static int test_dispatch_requests(struct request_queue *q, int force) +{ + struct test_data *td = q->elevator->elevator_data; + struct request *rq = NULL; + + switch (td->test_state) { + case TEST_IDLE: + if (!list_empty(&td->queue)) { + rq = list_entry(td->queue.next, struct request, + queuelist); + list_del_init(&rq->queuelist); + elv_dispatch_sort(q, rq); + return 1; + } + break; + case TEST_RUNNING: + if (td->next_req) { + rq = td->next_req->rq; + td->next_req = + latter_test_request(td->req_q, td->next_req); + if (!rq) + return 0; + print_req(rq); + elv_dispatch_sort(q, rq); + return 1; + } + break; + case TEST_COMPLETED: + default: + return 0; + } + + return 0; +} + +static void test_add_request(struct request_queue *q, + struct request *rq) +{ + struct test_data *td = q->elevator->elevator_data; + + list_add_tail(&rq->queuelist, &td->queue); +} + +static struct request * +test_former_request(struct request_queue *q, struct request *rq) +{ + struct test_data *td = q->elevator->elevator_data; + + if (rq->queuelist.prev == &td->queue) + return NULL; + return list_entry(rq->queuelist.prev, struct request, queuelist); +} + +static struct request * +test_latter_request(struct request_queue *q, struct request *rq) +{ + struct test_data *td = q->elevator->elevator_data; + + if (rq->queuelist.next == &td->queue) + return NULL; + return list_entry(rq->queuelist.next, struct request, queuelist); +} + +static int test_init_queue(struct request_queue *q) +{ + ptd = kmalloc_node(sizeof(struct test_data), GFP_KERNEL, + q->node); + if (!ptd) + return -ENODEV; + + memset((void *)ptd, 0, sizeof(struct test_data)); + INIT_LIST_HEAD(&ptd->queue); + INIT_LIST_HEAD(&ptd->test_queue); + init_waitqueue_head(&ptd->wait_q); + ptd->req_q = q; + q->elevator->elevator_data = ptd; + + setup_timer(&ptd->timeout_timer, test_timeout_handler, + (unsigned long)ptd); + + test_debugfs_init(ptd); + + return 0; +} + +static void test_exit_queue(struct elevator_queue *e) +{ + struct test_data *td = e->elevator_data; + + BUG_ON(!list_empty(&td->queue)); + + test_debugfs_cleanup(td); + + kfree(td); +} + +static struct elevator_type elevator_test_iosched = { + .ops = { + .elevator_merge_req_fn = test_merged_requests, + .elevator_dispatch_fn = test_dispatch_requests, + .elevator_add_req_fn = test_add_request, + .elevator_former_req_fn = test_former_request, + .elevator_latter_req_fn = test_latter_request, + .elevator_init_fn = test_init_queue, + .elevator_exit_fn = test_exit_queue, + }, + .elevator_name = "test-iosched", + .elevator_owner = THIS_MODULE, +}; + +static int __init test_init(void) +{ + elv_register(&elevator_test_iosched); + + return 0; +} + +static void __exit test_exit(void) +{ + elv_unregister(&elevator_test_iosched); +} + +module_init(test_init); +module_exit(test_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Test IO scheduler"); -- 1.7.3.3 -- Sent by a consultant of the Qualcomm Innovation Center, Inc. The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum. -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/