Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756296Ab2EVF5u (ORCPT ); Tue, 22 May 2012 01:57:50 -0400 Received: from mail-pb0-f46.google.com ([209.85.160.46]:44934 "EHLO mail-pb0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755248Ab2EVF5r (ORCPT ); Tue, 22 May 2012 01:57:47 -0400 From: yadi.brar01@gmail.com To: linux-kernel@vger.kernel.org Cc: linux-samsung-soc@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Mark Brown , Liam Girdwood , Yadwinder Singh Brar Subject: [PATCH v3 2/2] regulator: Add support for MAX77686. Date: Tue, 22 May 2012 11:27:00 +0530 Message-Id: <4fbb2ada.63de440a.589d.78e2@mx.google.com> X-Mailer: git-send-email 1.7.0.4 In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13879 Lines: 448 From: Yadwinder Singh Brar Add support for PMIC/regulator portion of MAX77686 multifunction device. MAX77686 provides LDOs[1-26] and BUCKs[1-9]. This is initial release of driv which supports setting and getting the voltage of a regulator with I2C interface. Signed-off-by: Yadwinder Singh Brar --- drivers/regulator/Kconfig | 9 + drivers/regulator/Makefile | 1 + drivers/regulator/max77686.c | 387 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 397 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/max77686.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index c86b886..e8f9417 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -195,6 +195,15 @@ config REGULATOR_MAX8998 via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX77686 + tristate "Maxim 77686 regulator" + depends on MFD_MAX77686 + help + This driver controls a Maxim 77686 voltage regulator via I2C + bus. The provided regulator is suitable for Exynos5 chips to + control VDD_ARM and VDD_INT voltages.It supports LDOs[1-26] + and BUCKs[1-9]. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 977fd46..d854453 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o +obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c new file mode 100644 index 0000000..98dbd50 --- /dev/null +++ b/drivers/regulator/max77686.c @@ -0,0 +1,387 @@ +/* + * max77686.c - Regulator driver for the Maxim 77686 + * + * Copyright (C) 2012 Samsung Electronics Co. Ltd. + * Chiwoong Byun + * Yadwinder Singh Brar + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This driver is based on max8997.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +struct max77686_data { + struct device *dev; + struct max77686_dev *iodev; + int num_regulators; + struct regulator_dev **rdev; + int ramp_delay; /* index of ramp_delay */ + + /*GPIO-DVS feature is not enabled with the + *current version of MAX77686 driver.*/ +}; + +static int max77686_voltage_dvs_buck_time_sel(struct regulator_dev *rdev, + unsigned int old_sel, + unsigned int new_sel) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + int ramp[] = {13, 27, 55, 100}; /* ramp_rate in mV/uS */ + + return DIV_ROUND_UP(rdev->desc->uV_step * + abs(new_sel - old_sel), + ramp[max77686->ramp_delay]); +} + +static int max77686_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_sel, + unsigned int new_sel) +{ + return DIV_ROUND_UP(rdev->desc->uV_step * + abs(new_sel - old_sel), + 100); +} + +static struct regulator_ops max77686_ops = { + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = max77686_voltage_time_sel, +}; + +static struct regulator_ops max77686_buck_ops = { + .map_voltage = regulator_map_voltage_linear, + .list_voltage = regulator_list_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = max77686_voltage_dvs_buck_time_sel, +}; + +#define regulator_desc_ldo(num) { \ + .name = "LDO"#num, \ + .id = MAX77686_LDO##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 800000, \ + .uV_step = 50000, \ + .n_voltages = 64, \ + .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = 0x3f, \ + .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = 0x0c, \ +} +#define regulator_desc_ldo_low_vol(num) { \ + .name = "LDO"#num, \ + .id = MAX77686_LDO##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 800000, \ + .uV_step = 25000, \ + .n_voltages = 64, \ + .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = 0x3f, \ + .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = 0x0c, \ +} +#define regulator_desc_buck(num) { \ + .name = "BUCK"#num, \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 750000, \ + .uV_step = 50000, \ + .n_voltages = 64, \ + .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \ + .vsel_mask = 0x3f, \ + .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \ + .enable_mask = 0x03, \ +} +#define regulator_desc_buck1(num) { \ + .name = "BUCK"#num, \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 750000, \ + .uV_step = 50000, \ + .n_voltages = 64, \ + .vsel_reg = MAX77686_REG_BUCK1OUT, \ + .vsel_mask = 0x3f, \ + .enable_reg = MAX77686_REG_BUCK1CTRL, \ + .enable_mask = 0x03, \ +} +#define regulator_desc_buck_dvs(num) { \ + .name = "BUCK"#num, \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_buck_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = 600000, \ + .uV_step = 12500, \ + .n_voltages = 256, \ + .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \ + .vsel_mask = 0xff, \ + .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \ + .enable_mask = 0x30, \ +} + +static struct regulator_desc regulators[] = { + regulator_desc_ldo_low_vol(1), + regulator_desc_ldo_low_vol(2), + regulator_desc_ldo(3), + regulator_desc_ldo(4), + regulator_desc_ldo(5), + regulator_desc_ldo_low_vol(6), + regulator_desc_ldo_low_vol(7), + regulator_desc_ldo_low_vol(8), + regulator_desc_ldo(9), + regulator_desc_ldo(10), + regulator_desc_ldo(11), + regulator_desc_ldo(12), + regulator_desc_ldo(13), + regulator_desc_ldo(14), + regulator_desc_ldo(15), + regulator_desc_ldo(16), + regulator_desc_ldo(17), + regulator_desc_ldo(18), + regulator_desc_ldo(19), + regulator_desc_ldo(20), + regulator_desc_ldo(21), + regulator_desc_ldo(22), + regulator_desc_ldo(23), + regulator_desc_ldo(24), + regulator_desc_ldo(25), + regulator_desc_ldo(26), + regulator_desc_buck1(1), + regulator_desc_buck_dvs(2), + regulator_desc_buck_dvs(3), + regulator_desc_buck_dvs(4), + regulator_desc_buck(5), + regulator_desc_buck(6), + regulator_desc_buck(7), + regulator_desc_buck(8), + regulator_desc_buck(9), +}; + +#ifdef CONFIG_OF +static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev, + struct max77686_platform_data *pdata) +{ + struct device_node *pmic_np, *regulators_np; + struct of_regulator_match *rdata; + unsigned int i, ret; + + pmic_np = iodev->dev->of_node; + if (!pmic_np) { + dev_err(iodev->dev, "could not find pmic sub-node\n"); + return -ENODEV; + } + + regulators_np = of_find_node_by_name(pmic_np, "voltage-regulators"); + if (!regulators_np) { + dev_err(iodev->dev, "could not find regulators sub-node\n"); + return -EINVAL; + } + + /* count the number of regulators to be supported in pmic */ + pdata->num_regulators = ARRAY_SIZE(regulators); + + rdata = devm_kzalloc(iodev->dev, sizeof(*rdata) * + (pdata->num_regulators), GFP_KERNEL); + if (!rdata) { + dev_err(iodev->dev, + "could not allocate memory for regulator data\n"); + return -ENOMEM; + } + + for (i = 0; i < pdata->num_regulators; i++) + rdata[i].name = regulators[i].name; + + ret = of_regulator_match(iodev->dev, regulators_np, rdata, + pdata->num_regulators); + + if (ret < 0) + dev_err(iodev->dev, "Parsing DT for regulators failed\n"); + else + dev_info(iodev->dev, "regulators found in device tree : %d\n" + , ret); + + pdata->regulators = rdata; + + if (of_property_read_u32(pmic_np, "max77686,buck_ramp_delay", &i)) + pdata->ramp_delay = i & 0xff; + + return 0; +} +#else +static int max77686_pmic_dt_parse_pdata(struct max77686_dev *iodev, + struct max77686_platform_data *pdata) +{ + return 0; +} +#endif /* CONFIG_OF */ + +static __devinit int max77686_pmic_probe(struct platform_device *pdev) +{ + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max77686_platform_data *pdata = iodev->pdata; + struct regulator_dev **rdev; + struct max77686_data *max77686; + struct i2c_client *i2c = iodev->i2c; + struct regulator_config config = { }; + int i, ret, size; + + if (iodev->dev->of_node) { + ret = max77686_pmic_dt_parse_pdata(iodev, pdata); + if (ret) + return ret; + } else { /* pdata from machine-setup file */ + if (!pdata) { + dev_err(&pdev->dev, "platform data not found\n"); + return -ENODEV; + } else { + if (pdata->num_regulators != ARRAY_SIZE(regulators)) { + dev_err(&pdev->dev, + "incomplete regulator list\n"); + return -ENODEV; + } + } + } + + max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data), + GFP_KERNEL); + if (!max77686) + return -ENOMEM; + + size = sizeof(struct regulator_dev *) * pdata->num_regulators; + max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + if (!max77686->rdev) { + kfree(max77686); + return -ENOMEM; + } + + rdev = max77686->rdev; + + max77686->dev = &pdev->dev; + max77686->iodev = iodev; + max77686->num_regulators = pdata->num_regulators; + + if (pdata->ramp_delay < MAX77686_RAMP_RATE_13MV || + pdata->ramp_delay > MAX77686_RAMP_RATE_100MV) + pdata->ramp_delay = MAX77686_RAMP_RATE_27MV; /* default */ + + max77686->ramp_delay = pdata->ramp_delay - 1; + max77686_update_reg(i2c, MAX77686_REG_BUCK2CTRL1, + max77686->ramp_delay << 6, RAMP_MASK); + max77686_update_reg(i2c, MAX77686_REG_BUCK3CTRL1, + max77686->ramp_delay << 6, RAMP_MASK); + max77686_update_reg(i2c, MAX77686_REG_BUCK4CTRL1, + max77686->ramp_delay << 6, RAMP_MASK); + + platform_set_drvdata(pdev, max77686); + + for (i = 0; i < pdata->num_regulators; i++) { + config.dev = max77686->dev; + config.init_data = pdata->regulators[i].init_data; + config.driver_data = max77686; + config.regmap = iodev->regmap; + + rdev[i] = regulator_register(®ulators[i], &config); + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(max77686->dev, + "regulator init failed for id : %d\n", i); + rdev[i] = NULL; + goto err; + } + } + + return 0; + err: + for (i = 0; i < max77686->num_regulators; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + + return ret; +} + +static int __devexit max77686_pmic_remove(struct platform_device *pdev) +{ + struct max77686_data *max77686 = platform_get_drvdata(pdev); + struct regulator_dev **rdev = max77686->rdev; + int i; + + for (i = 0; i < max77686->num_regulators; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + + return 0; +} + +static const struct platform_device_id max77686_pmic_id[] = { + {"max77686-pmic", 0}, + {}, +}; +MODULE_DEVICE_TABLE(platform, max77686_pmic_id); + +static struct platform_driver max77686_pmic_driver = { + .driver = { + .name = "max77686-pmic", + .owner = THIS_MODULE, + }, + .probe = max77686_pmic_probe, + .remove = __devexit_p(max77686_pmic_remove), + .id_table = max77686_pmic_id, +}; + +static int __init max77686_pmic_init(void) +{ + return platform_driver_register(&max77686_pmic_driver); +} +subsys_initcall(max77686_pmic_init); + +static void __exit max77686_pmic_cleanup(void) +{ + platform_driver_unregister(&max77686_pmic_driver); +} +module_exit(max77686_pmic_cleanup); + +MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver"); +MODULE_AUTHOR("Chiwoong Byun "); +MODULE_AUTHOR("Yadwinder Singh Brar "); +MODULE_LICENSE("GPL"); -- 1.7.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/