Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760001Ab2EVR77 (ORCPT ); Tue, 22 May 2012 13:59:59 -0400 Received: from mail-pz0-f46.google.com ([209.85.210.46]:56580 "EHLO mail-pz0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1757416Ab2EVR75 (ORCPT ); Tue, 22 May 2012 13:59:57 -0400 From: David Daney To: devicetree-discuss@lists.ozlabs.org, Grant Likely , Rob Herring , "David S. Miller" , netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, Andy Fleming , David Daney Subject: [PATCH 1/5] netdev/phy: Handle IEEE802.3 clause 45 Ethernet PHYs Date: Tue, 22 May 2012 10:59:48 -0700 Message-Id: <1337709592-23347-2-git-send-email-ddaney.cavm@gmail.com> X-Mailer: git-send-email 1.7.2.3 In-Reply-To: <1337709592-23347-1-git-send-email-ddaney.cavm@gmail.com> References: <1337709592-23347-1-git-send-email-ddaney.cavm@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8986 Lines: 274 From: David Daney The IEEE802.3 clause 45 MDIO bus protocol allows for directly addressing PHY registers using a 21 bit address, and is used by many 10G Ethernet PHYS. Already existing is the ability of MDIO bus drivers to use clause 45, with the MII_ADDR_C45 flag. Here we add struct phy_c45_device_ids to hold the device identifier registers present in clause 45. struct phy_device gets a couple of new fields: c45_ids to hold the identifiers and is_c45 to signal that it is clause 45. Normally the MII_ADDR_C45 flag is ORed with the register address to indicate a clause 45 transaction. Here we also use this flag in the *device* address passed to get_phy_device() to indicate that probing should be done with clause 45 transactions. EXPORT phy_device_create() so that the follow-on patch to of_mdio.c can use it to create phy devices for PHYs, that have non-standard device identifier registers, based on the device tree bindings. Signed-off-by: David Daney --- drivers/net/phy/phy_device.c | 110 +++++++++++++++++++++++++++++++++++++++--- include/linux/phy.h | 25 +++++++++- 2 files changed, 126 insertions(+), 9 deletions(-) diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c index de86a55..3f989ef 100644 --- a/drivers/net/phy/phy_device.c +++ b/drivers/net/phy/phy_device.c @@ -149,8 +149,8 @@ int phy_scan_fixups(struct phy_device *phydev) } EXPORT_SYMBOL(phy_scan_fixups); -static struct phy_device* phy_device_create(struct mii_bus *bus, - int addr, int phy_id) +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, + struct phy_c45_device_ids *c45_ids) { struct phy_device *dev; @@ -171,8 +171,12 @@ static struct phy_device* phy_device_create(struct mii_bus *bus, dev->autoneg = AUTONEG_ENABLE; + dev->is_c45 = (addr & MII_ADDR_C45) != 0; + addr &= ~MII_ADDR_C45; dev->addr = addr; dev->phy_id = phy_id; + if (c45_ids) + dev->c45_ids = *c45_ids; dev->bus = bus; dev->dev.parent = bus->parent; dev->dev.bus = &mdio_bus_type; @@ -197,20 +201,104 @@ static struct phy_device* phy_device_create(struct mii_bus *bus, return dev; } +EXPORT_SYMBOL(phy_device_create); + +/** + * get_phy_c45_ids - reads the specified addr for its 802.3-c45 IDs. + * @bus: the target MII bus + * @addr: PHY address on the MII bus + * @phy_id: where to store the ID retrieved. + * @c45_ids: where to store the c45 ID information. + * + * If the PHY devices-in-package appears to be valid, it and the + * corresponding identifiers are stored in @c45_ids, zero is stored + * in @phy_id. Otherwise 0xffffffff is stored in @phy_id. Returns + * zero on success. + * + */ +static int get_phy_c45_ids(struct mii_bus *bus, int addr, u32 *phy_id, + struct phy_c45_device_ids *c45_ids) { + int phy_reg; + int i, reg_addr; + + /* + * Find first non-zero Devices In package. Device + * zero is reserved, so don't probe it. + */ + for (i = 1; + i < ARRAY_SIZE(c45_ids->device_ids) && + c45_ids->devices_in_package == 0; + i++) { + reg_addr = MII_ADDR_C45 | i << 16 | 6; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->devices_in_package = (phy_reg & 0xffff) << 16; + + + reg_addr = MII_ADDR_C45 | i << 16 | 5; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->devices_in_package |= (phy_reg & 0xffff); + + /* + * If mostly Fs, there is no device there, + * let's get out of here. + */ + if ((c45_ids->devices_in_package & 0x1fffffff) == 0x1fffffff) { + *phy_id = 0xffffffff; + return 0; + } + } + + /* Now probe Device Identifiers for each device present. */ + for (i = 1; i < ARRAY_SIZE(c45_ids->device_ids); i++) { + if (!(c45_ids->devices_in_package & (1 << i))) + continue; + + reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID1; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->device_ids[i] = (phy_reg & 0xffff) << 16; + + + reg_addr = MII_ADDR_C45 | i << 16 | MII_PHYSID2; + phy_reg = mdiobus_read(bus, addr, reg_addr); + if (phy_reg < 0) + return -EIO; + c45_ids->device_ids[i] |= (phy_reg & 0xffff); + } + *phy_id = 0; + return 0; +} /** * get_phy_id - reads the specified addr for its ID. * @bus: the target MII bus * @addr: PHY address on the MII bus * @phy_id: where to store the ID retrieved. + * @c45_ids: where to store the c45 ID information. + * + * Description: In the case of a 802.3-c22 PHY, reads the ID registers + * of the PHY at @addr on the @bus, stores it in @phy_id and returns + * zero on success. + * + * In the case of a 802.3-c45 PHY, get_phy_c45_ids() is invoked, and + * its return value is in turn returned. * - * Description: Reads the ID registers of the PHY at @addr on the - * @bus, stores it in @phy_id and returns zero on success. */ -static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) +static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id, + struct phy_c45_device_ids *c45_ids) { int phy_reg; + if (addr & MII_ADDR_C45) { + addr &= ~MII_ADDR_C45; + + return get_phy_c45_ids(bus, addr, phy_id, c45_ids); + } /* Grab the bits from PHYIR1, and put them * in the upper half */ phy_reg = mdiobus_read(bus, addr, MII_PHYSID1); @@ -238,14 +326,17 @@ static int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id) * * Description: Reads the ID registers of the PHY at @addr on the * @bus, then allocates and returns the phy_device to represent it. + * If @addr & MII_ADDR_C45 is not zero, the PHY is assumed to be + * 802.3-c45. */ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) { struct phy_device *dev = NULL; u32 phy_id; + struct phy_c45_device_ids c45_ids = {0}; int r; - r = get_phy_id(bus, addr, &phy_id); + r = get_phy_id(bus, addr, &phy_id, &c45_ids); if (r) return ERR_PTR(r); @@ -253,7 +344,7 @@ struct phy_device * get_phy_device(struct mii_bus *bus, int addr) if ((phy_id & 0x1fffffff) == 0x1fffffff) return NULL; - dev = phy_device_create(bus, addr, phy_id); + dev = phy_device_create(bus, addr, phy_id, &c45_ids); return dev; } @@ -446,6 +537,11 @@ static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev, /* Assume that if there is no driver, that it doesn't * exist, and we should use the genphy driver. */ if (NULL == d->driver) { + if (phydev->is_c45) { + pr_err("No driver for phy %x\n", phydev->phy_id); + return -ENODEV; + } + d->driver = &genphy_driver.driver; err = d->driver->probe(d); diff --git a/include/linux/phy.h b/include/linux/phy.h index 9039009..283a318 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -83,8 +83,12 @@ typedef enum { */ #define MII_BUS_ID_SIZE (20 - 3) -/* Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the 21 bit - IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy chips. */ +/* + * Or MII_ADDR_C45 into regnum for read/write on mii_bus to enable the + * 21 bit IEEE 802.3ae clause 45 addressing mode used by 10GIGE phy + * chips. Also may be ORed into the device address in + * get_phy_device(). + */ #define MII_ADDR_C45 (1<<30) struct device; @@ -243,6 +247,16 @@ enum phy_state { PHY_RESUMING }; +/* + * phy_c45_device_ids: 802.3-c45 Device Identifiers + * + * devices_in_package: Bit vector of devices present. + * device_ids: The device identifer for each present device. + */ +struct phy_c45_device_ids { + u32 devices_in_package; + u32 device_ids[8]; +}; /* phy_device: An instance of a PHY * @@ -250,6 +264,8 @@ enum phy_state { * bus: Pointer to the bus this PHY is on * dev: driver model device structure for this PHY * phy_id: UID for this device found during discovery + * c45_ids: 802.3-c45 Device Identifers if is_c45. + * is_c45: Set to true if this phy uses clause 45 addressing. * state: state of the PHY for management purposes * dev_flags: Device-specific flags used by the PHY driver. * addr: Bus address of PHY @@ -285,6 +301,9 @@ struct phy_device { u32 phy_id; + struct phy_c45_device_ids c45_ids; + bool is_c45; + enum phy_state state; u32 dev_flags; @@ -477,6 +496,8 @@ static inline int phy_write(struct phy_device *phydev, u32 regnum, u16 val) return mdiobus_write(phydev->bus, phydev->addr, regnum, val); } +struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id, + struct phy_c45_device_ids *c45_ids); struct phy_device* get_phy_device(struct mii_bus *bus, int addr); int phy_device_register(struct phy_device *phy); int phy_init_hw(struct phy_device *phydev); -- 1.7.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/