Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760086Ab2EVSBb (ORCPT ); Tue, 22 May 2012 14:01:31 -0400 Received: from mail-pb0-f46.google.com ([209.85.160.46]:65022 "EHLO mail-pb0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1759290Ab2EVR75 (ORCPT ); Tue, 22 May 2012 13:59:57 -0400 From: David Daney To: devicetree-discuss@lists.ozlabs.org, Grant Likely , Rob Herring , "David S. Miller" , netdev@vger.kernel.org Cc: linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, Andy Fleming , David Daney Subject: [PATCH 4/5] netdev/phy: Add driver for Broadcom BCM87XX 10G Ethernet PHYs Date: Tue, 22 May 2012 10:59:51 -0700 Message-Id: <1337709592-23347-5-git-send-email-ddaney.cavm@gmail.com> X-Mailer: git-send-email 1.7.2.3 In-Reply-To: <1337709592-23347-1-git-send-email-ddaney.cavm@gmail.com> References: <1337709592-23347-1-git-send-email-ddaney.cavm@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9321 Lines: 335 From: David Daney Add a driver for BCM8706 and BCM8727 devices. These are a 10Gig PHYs which use MII_ADDR_C45 addressing. They are always 10G full duplex, so there is no autonegotiation. All we do is report link state and send interrupts when it changes. If the PHY has a device tree of_node associated with it, the "broadcom,c45-reg-init" property is used to supply register initialization values when config_init() is called. Signed-off-by: David Daney --- .../devicetree/bindings/net/broadcom-bcm87xx.txt | 29 +++ drivers/net/phy/Kconfig | 5 + drivers/net/phy/Makefile | 1 + drivers/net/phy/bcm87xx.c | 237 ++++++++++++++++++++ 4 files changed, 272 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt create mode 100644 drivers/net/phy/bcm87xx.c diff --git a/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt b/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt new file mode 100644 index 0000000..7c86d5e --- /dev/null +++ b/Documentation/devicetree/bindings/net/broadcom-bcm87xx.txt @@ -0,0 +1,29 @@ +The Broadcom BCM87XX devices are a family of 10G Ethernet PHYs. They +have these bindings in addition to the standard PHY bindings. + +Compatible: Should contain "broadcom,bcm8706" or "broadcom,bcm8727" and + "ethernet-phy-ieee802.3-c45" + +Optional Properties: + +- broadcom,c45-reg-init : one of more sets of 4 cells. The first cell + is the MDIO Manageable Device (MMD) address, the second a register + address within the MMD, the third cell contains a mask to be ANDed + with the existing register value, and the fourth cell is ORed with + he result to yield the new register value. If the third cell has a + value of zero, no read of the existing value is performed. + +Example: + + ethernet-phy@5 { + reg = <5>; + compatible = "broadcom,bcm8706", "ethernet-phy-ieee802.3-c45"; + interrupt-parent = <&gpio>; + interrupts = <12 8>; /* Pin 12, active low */ + /* + * Set PMD Digital Control Register for + * GPIO[1] Tx/Rx + * GPIO[0] R64 Sync Acquired + */ + broadcom,c45-reg-init = <1 0xc808 0xff8f 0x70>; + }; diff --git a/drivers/net/phy/Kconfig b/drivers/net/phy/Kconfig index 32e9be0..9e36c8f 100644 --- a/drivers/net/phy/Kconfig +++ b/drivers/net/phy/Kconfig @@ -67,6 +67,11 @@ config BCM63XX_PHY ---help--- Currently supports the 6348 and 6358 PHYs. +config BCM87XX_PHY + tristate "Driver for Broadcom BCM8706 and BCM8727 PHYs" + help + Currently supports the BCM8706 and BCM8727 10G Ethernet PHYs. + config ICPLUS_PHY tristate "Drivers for ICPlus PHYs" ---help--- diff --git a/drivers/net/phy/Makefile b/drivers/net/phy/Makefile index f51af68..6d2dc6c 100644 --- a/drivers/net/phy/Makefile +++ b/drivers/net/phy/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_SMSC_PHY) += smsc.o obj-$(CONFIG_VITESSE_PHY) += vitesse.o obj-$(CONFIG_BROADCOM_PHY) += broadcom.o obj-$(CONFIG_BCM63XX_PHY) += bcm63xx.o +obj-$(CONFIG_BCM87XX_PHY) += bcm87xx.o obj-$(CONFIG_ICPLUS_PHY) += icplus.o obj-$(CONFIG_REALTEK_PHY) += realtek.o obj-$(CONFIG_LSI_ET1011C_PHY) += et1011c.o diff --git a/drivers/net/phy/bcm87xx.c b/drivers/net/phy/bcm87xx.c new file mode 100644 index 0000000..6883c7c --- /dev/null +++ b/drivers/net/phy/bcm87xx.c @@ -0,0 +1,237 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 2011 - 2012 Cavium, Inc. + */ + +#include +#include +#include + +#define PHY_ID_BCM8706 0x0143bdc1 +#define PHY_ID_BCM8727 0x0143bff0 + +#define BCM87XX_PMD_RX_SIGNAL_DETECT (MII_ADDR_C45 | 0x1000a) +#define BCM87XX_10GBASER_PCS_STATUS (MII_ADDR_C45 | 0x30020) +#define BCM87XX_XGXS_LANE_STATUS (MII_ADDR_C45 | 0x40018) + +#define BCM87XX_LASI_CONTROL (MII_ADDR_C45 | 0x39002) +#define BCM87XX_LASI_STATUS (MII_ADDR_C45 | 0x39005) + +#if IS_ENABLED(CONFIG_OF_MDIO) +/* + * Set and/or override some configuration registers based on the + * marvell,reg-init property stored in the of_node for the phydev. + * + * broadcom,c45-reg-init = ,...; + * + * There may be one or more sets of : + * + * devid: which sub-device to use. + * reg: the register. + * mask: if non-zero, ANDed with existing register value. + * value: ORed with the masked value and written to the regiser. + * + */ +static int bcm87xx_of_reg_init(struct phy_device *phydev) +{ + const __be32 *paddr; + int len, i, ret; + + if (!phydev->dev.of_node) + return 0; + + paddr = of_get_property(phydev->dev.of_node, + "broadcom,c45-reg-init", &len); + if (!paddr || len < (4 * sizeof(*paddr))) + return 0; + + ret = 0; + len /= sizeof(*paddr); + for (i = 0; i < len - 3; i += 4) { + u16 devid = be32_to_cpup(paddr + i); + u16 reg = be32_to_cpup(paddr + i + 1); + u16 mask = be32_to_cpup(paddr + i + 2); + u16 val_bits = be32_to_cpup(paddr + i + 3); + int val; + u32 regnum = MII_ADDR_C45 | (devid << 16) | reg; + val = 0; + if (mask) { + val = phy_read(phydev, regnum); + if (val < 0) { + ret = val; + goto err; + } + val &= mask; + } + val |= val_bits; + + ret = phy_write(phydev, regnum, val); + if (ret < 0) + goto err; + } +err: + return ret; +} +#else +static int bcm87xx_of_reg_init(struct phy_device *phydev) +{ + return 0; +} +#endif /* CONFIG_OF_MDIO */ + +static int bcm87xx_config_init(struct phy_device *phydev) +{ + phydev->supported = SUPPORTED_10000baseR_FEC; + phydev->advertising = ADVERTISED_10000baseR_FEC; + phydev->state = PHY_NOLINK; + + bcm87xx_of_reg_init(phydev); + + return 0; +} + +static int bcm87xx_config_aneg(struct phy_device *phydev) +{ + return -EINVAL; +} + +static int bcm87xx_read_status(struct phy_device *phydev) +{ + int rx_signal_detect; + int pcs_status; + int xgxs_lane_status; + + rx_signal_detect = phy_read(phydev, BCM87XX_PMD_RX_SIGNAL_DETECT); + if (rx_signal_detect < 0) + return rx_signal_detect; + + if ((rx_signal_detect & 1) == 0) + goto no_link; + + pcs_status = phy_read(phydev, BCM87XX_10GBASER_PCS_STATUS); + if (pcs_status < 0) + return pcs_status; + + if ((pcs_status & 1) == 0) + goto no_link; + + xgxs_lane_status = phy_read(phydev, BCM87XX_XGXS_LANE_STATUS); + if (xgxs_lane_status < 0) + return xgxs_lane_status; + + if ((xgxs_lane_status & 0x1000) == 0) + goto no_link; + + phydev->speed = 10000; + phydev->link = 1; + phydev->duplex = 1; + return 0; + +no_link: + phydev->link = 0; + return 0; +} + +static int bcm87xx_config_intr(struct phy_device *phydev) +{ + int reg, err; + + reg = phy_read(phydev, BCM87XX_LASI_CONTROL); + + if (reg < 0) + return reg; + + if (phydev->interrupts == PHY_INTERRUPT_ENABLED) + reg |= 1; + else + reg &= ~1; + + err = phy_write(phydev, BCM87XX_LASI_CONTROL, reg); + return err; +} + +static int bcm87xx_did_interrupt(struct phy_device *phydev) +{ + int reg; + + reg = phy_read(phydev, BCM87XX_LASI_STATUS); + + if (reg < 0) { + dev_err(&phydev->dev, + "Error: Read of BCM87XX_LASI_STATUS failed: %d\n", reg); + return 0; + } + return (reg & 1) != 0; +} + +static int bcm87xx_ack_interrupt(struct phy_device *phydev) +{ + /* Reading the LASI status clears it. */ + bcm87xx_did_interrupt(phydev); + return 0; +} + +static int bcm8706_match_phy_device(struct phy_device *phydev) +{ + return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8706; +} + +static int bcm8727_match_phy_device(struct phy_device *phydev) +{ + return phydev->c45_ids.device_ids[4] == PHY_ID_BCM8727; +} + +static struct phy_driver bcm8706_driver = { + .phy_id = PHY_ID_BCM8706, + .phy_id_mask = 0xffffffff, + .name = "Broadcom BCM8706", + .flags = PHY_HAS_INTERRUPT, + .config_init = bcm87xx_config_init, + .config_aneg = bcm87xx_config_aneg, + .read_status = bcm87xx_read_status, + .ack_interrupt = bcm87xx_ack_interrupt, + .config_intr = bcm87xx_config_intr, + .did_interrupt = bcm87xx_did_interrupt, + .match_phy_device = bcm8706_match_phy_device, + .driver = { .owner = THIS_MODULE }, +}; + +static struct phy_driver bcm8727_driver = { + .phy_id = PHY_ID_BCM8727, + .phy_id_mask = 0xffffffff, + .name = "Broadcom BCM8727", + .flags = PHY_HAS_INTERRUPT, + .config_init = bcm87xx_config_init, + .config_aneg = bcm87xx_config_aneg, + .read_status = bcm87xx_read_status, + .ack_interrupt = bcm87xx_ack_interrupt, + .config_intr = bcm87xx_config_intr, + .did_interrupt = bcm87xx_did_interrupt, + .match_phy_device = bcm8727_match_phy_device, + .driver = { .owner = THIS_MODULE }, +}; + +static int __init bcm87xx_init(void) +{ + int ret; + + ret = phy_driver_register(&bcm8706_driver); + if (ret) + goto err; + + ret = phy_driver_register(&bcm8727_driver); +err: + return ret; +} +module_init(bcm87xx_init); + +static void __exit bcm87xx_exit(void) +{ + phy_driver_unregister(&bcm8706_driver); + phy_driver_unregister(&bcm8727_driver); +} +module_exit(bcm87xx_exit); + -- 1.7.2.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/