Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 13 Aug 2002 09:59:10 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 13 Aug 2002 09:59:10 -0400 Received: from brynhild.MtRoyal.AB.CA ([142.109.10.24]:12675 "EHLO brynhild.mtroyal.ab.ca") by vger.kernel.org with ESMTP id ; Tue, 13 Aug 2002 09:59:08 -0400 Date: Tue, 13 Aug 2002 08:02:28 -0600 (MDT) From: James Bourne To: Tom Sightler cc: Ingo Molnar , Jeff Chua , Linux Kernel Subject: Re: searching for dell 2650 PERC3-DI driver In-Reply-To: <004401c242c7$842222f0$0b2b0a0a@zeusinc.com> Message-ID: MIME-Version: 1.0 X-scanner: scanned by Inflex 1.0.12.2 - (http://pldaniels.com/inflex/) Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3128 Lines: 82 On Tue, 13 Aug 2002, Tom Sightler wrote: > On Tue, 13 Aug 2002, Jeff Chua wrote: > > I'm buying a Dell PowerEdge 2650 and need to know where to get driver for > > the RAID controller > > > > PERC3-DI, PERC3-DC, or PERC3-QC > > > > Does anyone know what kind of network adaptor is on the board? > > The best place that I know of for information about ANY Dell server and > Linux is at http://www.domsch.com/linux/. There are instructions there on > how to get recent versions of the aacraid driver to recognize this card > during boot, assuming a fairly recent distribution. > > The onboard network adapter is Broadcom NeXtreme Gigabit adapter. I believe > this is supported in recent distributions/kernels by the tg3 driver and Dell > provides binary drivers from Broadcom as well. FYI, we do have this sytem up and running. If it's a PERC3-DI, then the raid driver is the aacraid as this is the ROMB raid, basically a firmware addon to the adaptec scsi on board (IIRC). For PERC3-DC or PERC3-QC the driver is the AMI megaraid driver. The tg3 driver included with 2.4.19 works for the Broadcom NetXtreame BCM5701 (Broadcom 570x). This system has the ServerWorks GC and is a P4 therefore hyperthreading does work. 2.4.19 so far seems very stable, but to balance IRQs across all the CPUs you will need Ingo Molnars IRQ balancing patches. His patch, as applied to 2.4.19, can be found at http://www.hardrock.org/kernel/irqbalance-2.4.19-MRC.patch Also, remember to compile in support for IDE CD and the CSB5 IDE chipset. This is the patch that I am currently testing on a single system. With heavy load on the disk, memory, and CPU (~19 load average for the past 3 days now) the system is still responsive and seems very stable. I can send the .config I am currently using if you wish. Regards James Bourne > > Later, > Tom > > - > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ > -- James Bourne, Supervisor Data Centre Operations Mount Royal College, Calgary, AB, CA www.mtroyal.ab.ca ****************************************************************************** This communication is intended for the use of the recipient to which it is addressed, and may contain confidential, personal, and or privileged information. Please contact the sender immediately if you are not the intended recipient of this communication, and do not copy, distribute, or take action relying on it. Any communication received in error, or subsequent reply, should be deleted or destroyed. ****************************************************************************** "There are only 10 types of people in this world: those who understand binary and those who don't." - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/