Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752775Ab2FAER1 (ORCPT ); Fri, 1 Jun 2012 00:17:27 -0400 Received: from mailout3.samsung.com ([203.254.224.33]:58907 "EHLO mailout3.samsung.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752037Ab2FAER0 (ORCPT ); Fri, 1 Jun 2012 00:17:26 -0400 X-AuditID: cbfee61b-b7faf6d000001f49-ca-4fc8425402c0 From: Jonghwa Lee To: linux-kernel@vger.kernel.org Cc: Liam Girdwood , Mark Brown , Yadwinder Singh Brar , Jonghwa Lee , Chiwoong Byun , Myungjoo Ham , Kyungmin Park Subject: [PATCH] regulator: MAX77686: Add Maxim 77686 regulator driver Date: Fri, 01 Jun 2012 13:17:14 +0900 Message-id: <1338524234-12165-1-git-send-email-jonghwa3.lee@samsung.com> X-Mailer: git-send-email 1.7.4.1 X-Brightmail-Tracker: H4sIAAAAAAAAA+NgFjrBJMWRmVeSWpSXmKPExsVy+t9jQd0QpxP+Bi8vKFlc3jWHzYHR4/Mm uQDGKC6blNSczLLUIn27BK6MlSvWMxZMyah4sFK2gXFxWBcjJ4eEgIlE69Hp7BC2mMSFe+vZ uhi5OIQEpjNKnFtyjRXCWckk8bf/CwtIFZuAjsT/fTfBOkQEFCQ29z4DK2IWWMcksXFHKytI QljATWLHhw1ADRwcLAKqEjt/xoKYvAIeEhfWFkEsU5BYcO8t2wRG7gWMDKsYRVMLkguKk9Jz jfSKE3OLS/PS9ZLzczcxgv33THoH46oGi0OMAhyMSjy8xy1P+AuxJpYVV+YeYpTgYFYS4WV4 c9xfiDclsbIqtSg/vqg0J7X4EKM0B4uSOO+TJTv8hQTSE0tSs1NTC1KLYLJMHJxSDYwrsj+9 D984423gjKhJs2LO3U0xdts5cfqb35OfLHNitL23f1r3jZt5FdckOz5oxAQkGy+8sO/1ff5s NxPOC5t97+mfFD4Tekf3zcmQqnfruqcvtTjRwpm67Ctn+3yWL5EHpJ++2hLfcvOszNcLF/aW LL3kHPuTy3mlv3ukxM49DxwMNq5ZsOL7KSWW4oxEQy3mouJEABaHH3TbAQAA X-TM-AS-MML: No Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13177 Lines: 405 Add driver for support max77686 regulator. MAX77686 provides LDOs[1~26] and BUCKs[1~9]. It support to set or get the volatege of regulator on max77686 chip with using regmap. Signed-off-by: Chiwoong Byun Signed-off-by: Jonghwa Lee Signed-off-by: Myungjoo Ham Signed-off-by: Kyungmin Park --- Changes from v5 - Remove clock registering and handling from regulator driver. - Seperate set_voltage_time_sel function for BUCKs supporting DVS. - Use pdata's initial data directly, do not use additional variable. v5 https://lkml.org/lkml/2012/5/28/293 drivers/regulator/Kconfig | 8 + drivers/regulator/Makefile | 1 + drivers/regulator/max77686.c | 337 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 346 insertions(+), 0 deletions(-) create mode 100644 drivers/regulator/max77686.c diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index 36db5a4..8e2ebad 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -195,6 +195,14 @@ config REGULATOR_MAX8998 via I2C bus. The provided regulator is suitable for S3C6410 and S5PC1XX chips to control VCC_CORE and VCC_USIM voltages. +config REGULATOR_MAX77686 + tristate "Maxim 77686 regulator" + depends on MFD_MAX77686 + help + This driver controls a Maxim 77686 regulator + via I2C bus. The provided regulator is suitable for + Exynos-4 chips to control VARM and VINT voltages. + config REGULATOR_PCAP tristate "Motorola PCAP2 regulator driver" depends on EZX_PCAP diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 94b5274..008931b 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -30,6 +30,7 @@ obj-$(CONFIG_REGULATOR_MAX8925) += max8925-regulator.o obj-$(CONFIG_REGULATOR_MAX8952) += max8952.o obj-$(CONFIG_REGULATOR_MAX8997) += max8997.o obj-$(CONFIG_REGULATOR_MAX8998) += max8998.o +obj-$(CONFIG_REGULATOR_MAX77686) += max77686.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c new file mode 100644 index 0000000..70046f8 --- /dev/null +++ b/drivers/regulator/max77686.c @@ -0,0 +1,337 @@ +/* + * max77686.c - Regulator driver for the Maxim 77686 + * + * Copyright (C) 2012 Samsung Electronics + * Chiwoong Byun + * Jonghwa Lee + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + * + * This driver is based on max8997.c + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define MAX77686_LDO_MINUV 800000 +#define MAX77686_LDO_UVSTEP 50000 +#define MAX77686_LDO_LOW_MINUV 800000 +#define MAX77686_LDO_LOW_UVSTEP 25000 +#define MAX77686_BUCK_MINUV 750000 +#define MAX77686_BUCK_UVSTEP 50000 +#define MAX77686_DVS_MINUV 600000 +#define MAX77686_DVS_UVSTEP 12500 + +#define MAX77686_OPMODE_SHIFT 6 +#define MAX77686_OPMODE_BUCK234_SHIFT 4 +#define MAX77686_OPMODE_MASK 0x3 + +#define MAX77686_VSEL_MASK 0x3F +#define MAX77686_DVS_VSEL_MASK 0xFF + +#define MAX77686_RAMP_RATE_MASK 0xC0 + +#define MAX77686_REGULATORS MAX77686_REG_MAX +#define MAX77686_LDOS 26 + +enum max77686_ramp_rate { + RAMP_RATE_13P75MV, + RAMP_RATE_27P5MV, + RAMP_RATE_55MV, + RAMP_RATE_NO_CTRL, /* 100mV/us */ +}; + +struct max77686_data { + struct device *dev; + struct max77686_dev *iodev; + int num_regulators; + struct regulator_dev **rdev; + int ramp_delay; /* in mV/us */ +}; + +static int max77686_set_dvs_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, unsigned int new_selector) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + int ramp_rate[] = {13, 27, 55, 100}; + return (DIV_ROUND_UP(rdev->desc->uV_step + * abs(new_selector - old_selector), + ramp_rate[max77686->ramp_delay])); +} + +static int max77686_set_voltage_time_sel(struct regulator_dev *rdev, + unsigned int old_selector, unsigned int new_selector) +{ + /* Unconditionally 100 mV/us */ + return (DIV_ROUND_UP(rdev->desc->uV_step + * abs(new_selector - old_selector), 100)); +} + +static struct regulator_ops max77686_ops = { + .list_voltage = regulator_list_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = max77686_set_voltage_time_sel, +}; + +static struct regulator_ops max77686_buck_dvs_ops = { + .list_voltage = regulator_list_voltage_linear, + .is_enabled = regulator_is_enabled_regmap, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .set_voltage_time_sel = max77686_set_dvs_voltage_time_sel, +}; + +#define regulator_desc_ldo(num) { \ + .name = "LDO"#num, \ + .id = MAX77686_LDO##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_LDO_MINUV, \ + .uV_step = MAX77686_LDO_UVSTEP, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77686_OPMODE_MASK \ + << MAX77686_OPMODE_SHIFT, \ +} +#define regulator_desc_ldo_low(num) { \ + .name = "LDO"#num, \ + .id = MAX77686_LDO##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_LDO_LOW_MINUV, \ + .uV_step = MAX77686_LDO_LOW_UVSTEP, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_LDO1CTRL1 + num - 1, \ + .enable_mask = MAX77686_OPMODE_MASK \ + << MAX77686_OPMODE_SHIFT, \ +} +#define regulator_desc_buck(num) { \ + .name = "BUCK"#num, \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_BUCK_MINUV, \ + .uV_step = MAX77686_BUCK_UVSTEP, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_BUCK5OUT + (num - 5) * 2, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_BUCK5CTRL + (num - 5) * 2, \ + .enable_mask = MAX77686_OPMODE_MASK, \ +} +#define regulator_desc_buck1(num) { \ + .name = "BUCK"#num, \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_BUCK_MINUV, \ + .uV_step = MAX77686_BUCK_UVSTEP, \ + .n_voltages = MAX77686_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_BUCK1OUT, \ + .vsel_mask = MAX77686_VSEL_MASK, \ + .enable_reg = MAX77686_REG_BUCK1CTRL, \ + .enable_mask = MAX77686_OPMODE_MASK, \ +} +#define regulator_desc_buck_dvs(num) { \ + .name = "BUCK"#num, \ + .id = MAX77686_BUCK##num, \ + .ops = &max77686_buck_dvs_ops, \ + .type = REGULATOR_VOLTAGE, \ + .owner = THIS_MODULE, \ + .min_uV = MAX77686_DVS_MINUV, \ + .uV_step = MAX77686_DVS_UVSTEP, \ + .n_voltages = MAX77686_DVS_VSEL_MASK + 1, \ + .vsel_reg = MAX77686_REG_BUCK2DVS1 + (num - 2) * 10, \ + .vsel_mask = MAX77686_DVS_VSEL_MASK, \ + .enable_reg = MAX77686_REG_BUCK2CTRL1 + (num - 2) * 10, \ + .enable_mask = MAX77686_OPMODE_MASK \ + << MAX77686_OPMODE_BUCK234_SHIFT, \ +} + +static struct regulator_desc regulators[] = { + regulator_desc_ldo_low(1), + regulator_desc_ldo_low(2), + regulator_desc_ldo(3), + regulator_desc_ldo(4), + regulator_desc_ldo(5), + regulator_desc_ldo_low(6), + regulator_desc_ldo_low(7), + regulator_desc_ldo_low(8), + regulator_desc_ldo(9), + regulator_desc_ldo(10), + regulator_desc_ldo(11), + regulator_desc_ldo(12), + regulator_desc_ldo(13), + regulator_desc_ldo(14), + regulator_desc_ldo_low(15), + regulator_desc_ldo(16), + regulator_desc_ldo(17), + regulator_desc_ldo(18), + regulator_desc_ldo(19), + regulator_desc_ldo(20), + regulator_desc_ldo(21), + regulator_desc_ldo(22), + regulator_desc_ldo(23), + regulator_desc_ldo(24), + regulator_desc_ldo(25), + regulator_desc_ldo(26), + regulator_desc_buck1(1), + regulator_desc_buck_dvs(2), + regulator_desc_buck_dvs(3), + regulator_desc_buck_dvs(4), + regulator_desc_buck(5), + regulator_desc_buck(6), + regulator_desc_buck(7), + regulator_desc_buck(8), + regulator_desc_buck(9), +}; + +static __devinit int max77686_pmic_probe(struct platform_device *pdev) +{ + struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); + struct max77686_platform_data *pdata = dev_get_platdata(iodev->dev); + struct regulator_dev **rdev; + struct max77686_data *max77686; + int i, size; + int ret = 0; + struct regulator_config config; + + dev_dbg(&pdev->dev, "%s\n", __func__); + + max77686 = devm_kzalloc(&pdev->dev, sizeof(struct max77686_data), + GFP_KERNEL); + if (!max77686) + return -ENOMEM; + + size = sizeof(struct regulator_dev *) * MAX77686_REGULATORS; + max77686->rdev = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); + if (!max77686->rdev) + return -ENOMEM; + + rdev = max77686->rdev; + max77686->dev = &pdev->dev; + max77686->iodev = iodev; + if (pdata) + max77686->num_regulators = pdata->num_regulators; + platform_set_drvdata(pdev, max77686); + + max77686->ramp_delay = RAMP_RATE_NO_CTRL; /* Set 0x3 for RAMP */ + regmap_update_bits(max77686->iodev->regmap, + MAX77686_REG_BUCK2CTRL1, MAX77686_RAMP_RATE_MASK, + max77686->ramp_delay << 6); + regmap_update_bits(max77686->iodev->regmap, + MAX77686_REG_BUCK3CTRL1, MAX77686_RAMP_RATE_MASK, + max77686->ramp_delay << 6); + regmap_update_bits(max77686->iodev->regmap, + MAX77686_REG_BUCK4CTRL1, MAX77686_RAMP_RATE_MASK, + max77686->ramp_delay << 6); + + if (pdata->num_regulators == MAX77686_REGULATORS) { + for (i = 0; i < MAX77686_REGULATORS; i++) { + config.dev = max77686->dev; + config.regmap = iodev->regmap; + config.driver_data = max77686; + config.init_data = pdata->regulators[i].initdata; + + rdev[i] = regulator_register(®ulators[i], &config); + + if (IS_ERR(rdev[i])) { + ret = PTR_ERR(rdev[i]); + dev_err(max77686->dev, + "regulator init failed for %d\n", i); + rdev[i] = NULL; + goto err; + } + } + } else { + dev_err(max77686->dev, + "Lack of initial data for regulator's initialiation\n"); + return -EINVAL; + } + return 0; +err: + for (i = 0; i < MAX77686_REGULATORS; i++) { + if (rdev[i]) + regulator_unregister(rdev[i]); + } + return ret; +} + +static int __devexit max77686_pmic_remove(struct platform_device *pdev) +{ + struct max77686_data *max77686 = platform_get_drvdata(pdev); + struct regulator_dev **rdev = max77686->rdev; + int i; + + for (i = 0; i < MAX77686_REGULATORS; i++) + if (rdev[i]) + regulator_unregister(rdev[i]); + + return 0; +} + +static const struct platform_device_id max77686_pmic_id[] = { + {"max77686-pmic", 0}, + { }, +}; +MODULE_DEVICE_TABLE(platform, max77686_pmic_id); + +static struct platform_driver max77686_pmic_driver = { + .driver = { + .name = "max77686-pmic", + .owner = THIS_MODULE, + }, + .probe = max77686_pmic_probe, + .remove = __devexit_p(max77686_pmic_remove), + .id_table = max77686_pmic_id, +}; + +static int __init max77686_pmic_init(void) +{ + return platform_driver_register(&max77686_pmic_driver); +} +subsys_initcall(max77686_pmic_init); + +static void __exit max77686_pmic_cleanup(void) +{ + platform_driver_unregister(&max77686_pmic_driver); +} +module_exit(max77686_pmic_cleanup); + +MODULE_DESCRIPTION("MAXIM 77686 Regulator Driver"); +MODULE_AUTHOR("Chiwoong Byun "); +MODULE_LICENSE("GPL"); -- 1.7.4.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/