Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757463Ab2FDU14 (ORCPT ); Mon, 4 Jun 2012 16:27:56 -0400 Received: from a.ns.miles-group.at ([95.130.255.143]:47839 "EHLO radon.swed.at" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1750967Ab2FDU1y (ORCPT ); Mon, 4 Jun 2012 16:27:54 -0400 From: Richard Weinberger To: jslaby@suse.cz Cc: user-mode-linux-devel@lists.sourceforge.net, gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org, viro@zeniv.linux.org.uk, alan@linux.intel.com, Richard Weinberger Subject: [PATCH 5/6] um: fully use tty_port Date: Mon, 4 Jun 2012 22:27:36 +0200 Message-Id: <1338841657-30358-6-git-send-email-richard@nod.at> X-Mailer: git-send-email 1.7.7.3 In-Reply-To: <1338841657-30358-1-git-send-email-richard@nod.at> References: <1338841657-30358-1-git-send-email-richard@nod.at> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7694 Lines: 259 ... use all tty_port helpers Signed-off-by: Richard Weinberger --- arch/um/drivers/line.c | 102 +++++++++++++++++---------------------- arch/um/drivers/line.h | 6 ++- arch/um/drivers/ssl.c | 15 ++---- arch/um/drivers/stdio_console.c | 20 ++++---- 4 files changed, 65 insertions(+), 78 deletions(-) diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index 131129a..95d5e78 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -296,43 +296,14 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data) return err; } -/* - * Normally, a driver like this can rely mostly on the tty layer - * locking, particularly when it comes to the driver structure. - * However, in this case, mconsole requests can come in "from the - * side", and race with opens and closes. - * - * mconsole config requests will want to be sure the device isn't in - * use, and get_config, open, and close will want a stable - * configuration. The checking and modification of the configuration - * is done under a spinlock. Checking whether the device is in use is - * line->tty->count > 1, also under the spinlock. - * - * line->count serves to decide whether the device should be enabled or - * disabled on the host. If it's equal to 0, then we are doing the - * first open or last close. Otherwise, open and close just return. - */ - -int line_open(struct line *lines, struct tty_struct *tty) +static int line_activate(struct tty_port *port, struct tty_struct *tty) { - struct line *line = &lines[tty->index]; - int err = -ENODEV; - - mutex_lock(&line->count_lock); - if (!line->valid) - goto out_unlock; - - err = 0; - if (line->port.count++) - goto out_unlock; - - BUG_ON(tty->driver_data); - tty->driver_data = line; - tty_port_tty_set(&line->port, tty); + int ret; + struct line *line = tty->driver_data; - err = enable_chan(line); - if (err) /* line_close() will be called by our caller */ - goto out_unlock; + ret = enable_chan(line); + if (ret) + return ret; if (!line->sigio) { chan_enable_winch(line->chan_out, tty); @@ -340,44 +311,60 @@ int line_open(struct line *lines, struct tty_struct *tty) } chan_window_size(line, &tty->winsize.ws_row, - &tty->winsize.ws_col); -out_unlock: - mutex_unlock(&line->count_lock); - return err; + &tty->winsize.ws_col); + + return 0; } -static void unregister_winch(struct tty_struct *tty); +static const struct tty_port_operations line_port_ops = { + .activate = line_activate, +}; -void line_close(struct tty_struct *tty, struct file * filp) +int line_open(struct tty_struct *tty, struct file *filp) { struct line *line = tty->driver_data; - /* - * If line_open fails (and tty->driver_data is never set), - * tty_open will call line_close. So just return in this case. - */ - if (line == NULL) - return; + return tty_port_open(&line->port, tty, filp); +} - /* We ignore the error anyway! */ - flush_buffer(line); +int line_install(struct tty_driver *driver, struct tty_struct *tty, + struct line *line) +{ + int ret; - mutex_lock(&line->count_lock); - BUG_ON(!line->valid); + ret = tty_standard_install(driver, tty); + if (ret) + return ret; + + tty->driver_data = line; - if (--line->port.count) - goto out_unlock; + return 0; +} + +static void unregister_winch(struct tty_struct *tty); - tty_port_tty_set(&line->port, NULL); - tty->driver_data = NULL; +void line_cleanup(struct tty_struct *tty) +{ + struct line *line = tty->driver_data; if (line->sigio) { unregister_winch(tty); line->sigio = 0; } +} -out_unlock: - mutex_unlock(&line->count_lock); +void line_close(struct tty_struct *tty, struct file * filp) +{ + struct line *line = tty->driver_data; + + tty_port_close(&line->port, tty, filp); +} + +void line_hangup(struct tty_struct *tty) +{ + struct line *line = tty->driver_data; + + tty_port_hangup(&line->port); } void close_lines(struct line *lines, int nlines) @@ -589,6 +576,7 @@ int register_lines(struct line_driver *line_driver, for (i = 0; i < nlines; i++) { tty_port_init(&lines[i].port); + lines[i].port.ops = &line_port_ops; spin_lock_init(&lines[i].lock); mutex_init(&lines[i].count_lock); lines[i].driver = line_driver; diff --git a/arch/um/drivers/line.h b/arch/um/drivers/line.h index 6c3b252..ad00f3e 100644 --- a/arch/um/drivers/line.h +++ b/arch/um/drivers/line.h @@ -58,7 +58,11 @@ struct line { }; extern void line_close(struct tty_struct *tty, struct file * filp); -extern int line_open(struct line *lines, struct tty_struct *tty); +extern int line_open(struct tty_struct *tty, struct file *filp); +extern int line_install(struct tty_driver *driver, struct tty_struct *tty, + struct line *line); +extern void line_cleanup(struct tty_struct *tty); +extern void line_hangup(struct tty_struct *tty); extern int line_setup(char **conf, unsigned nlines, char **def, char *init, char *name); extern int line_write(struct tty_struct *tty, const unsigned char *buf, diff --git a/arch/um/drivers/ssl.c b/arch/um/drivers/ssl.c index cba95d9..7e86f00 100644 --- a/arch/um/drivers/ssl.c +++ b/arch/um/drivers/ssl.c @@ -87,19 +87,13 @@ static int ssl_remove(int n, char **error_out) error_out); } -static int ssl_open(struct tty_struct *tty, struct file *filp) +static int ssl_install(struct tty_driver *driver, struct tty_struct *tty) { - int err = line_open(serial_lines, tty); - - if (err) - printk(KERN_ERR "Failed to open serial line %d, err = %d\n", - tty->index, err); - - return err; + return line_install(driver, tty, &serial_lines[tty->index]); } static const struct tty_operations ssl_ops = { - .open = ssl_open, + .open = line_open, .close = line_close, .write = line_write, .put_char = line_put_char, @@ -110,6 +104,9 @@ static const struct tty_operations ssl_ops = { .set_termios = line_set_termios, .throttle = line_throttle, .unthrottle = line_unthrottle, + .install = ssl_install, + .cleanup = line_cleanup, + .hangup = line_hangup, }; /* Changed by ssl_init and referenced by ssl_exit, which are both serialized diff --git a/arch/um/drivers/stdio_console.c b/arch/um/drivers/stdio_console.c index 5cefdba..929b99a 100644 --- a/arch/um/drivers/stdio_console.c +++ b/arch/um/drivers/stdio_console.c @@ -89,21 +89,17 @@ static int con_remove(int n, char **error_out) return line_remove(vts, ARRAY_SIZE(vts), n, error_out); } -static int con_open(struct tty_struct *tty, struct file *filp) -{ - int err = line_open(vts, tty); - if (err) - printk(KERN_ERR "Failed to open console %d, err = %d\n", - tty->index, err); - - return err; -} - /* Set in an initcall, checked in an exitcall */ static int con_init_done = 0; +static int con_install(struct tty_driver *driver, struct tty_struct *tty) +{ + return line_install(driver, tty, &vts[tty->index]); +} + static const struct tty_operations console_ops = { - .open = con_open, + .open = line_open, + .install = con_install, .close = line_close, .write = line_write, .put_char = line_put_char, @@ -114,6 +110,8 @@ static const struct tty_operations console_ops = { .set_termios = line_set_termios, .throttle = line_throttle, .unthrottle = line_unthrottle, + .cleanup = line_cleanup, + .hangup = line_hangup, }; static void uml_console_write(struct console *console, const char *string, -- 1.7.7.3 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/