Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753644Ab2FKLCf (ORCPT ); Mon, 11 Jun 2012 07:02:35 -0400 Received: from mail.work-microwave.de ([62.245.205.51]:54883 "EHLO work-microwave.de" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1753215Ab2FKLCd (ORCPT ); Mon, 11 Jun 2012 07:02:33 -0400 From: Roland Stigge To: arm@kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, kevin.wells@nxp.com, srinivas.bakki@nxp.com, aletes.xgr@gmail.com Cc: Roland Stigge Subject: [PATCH 0/14] ARM: LPC32xx specific updates for next Date: Mon, 11 Jun 2012 13:02:03 +0200 Message-Id: <1339412537-24485-1-git-send-email-stigge@antcom.de> X-Mailer: git-send-email 1.7.10 X-FEAS-SYSTEM-WL: rst@work-microwave.de, 192.168.11.78 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2258 Lines: 51 This patch set includes various updates for mach-lpc32xx, including DT binding for serial and dts updates. A new reference board is supported (EA3250). The board support file phy3250.c is updated to become more general, useable for other boards also. There is still board specific stuff in it, though (some devicetree auxdata). Further, clock updates, DMA support, MMC support and a defconfig update for LPC32xx is included. Signed-off-by: Roland Stigge -- Applies to v3.5-rc2 You can also pull from git://git.antcom.de/linux-2.6.git lpc32xx-next Roland Stigge (14): ARM: LPC32xx: Add NAND flash timing to PHY3250 board dts ARM: LPC32xx: Clock initialization for NAND controllers ARM: LPC32xx: Remove SLC controller initialization from platform init ARM: LPC32xx: Add DMA configuration to platform data ARM: LPC32xx: Adjust dtsi file for MLC controller configuration ARM: LPC32xx: Add dts for EA3250 reference board ARM: LPC32xx: DTS adjustment for key matrix controller ARM: LPC32xx: Clock adjustment for key matrix controller ARM: LPC32xx: Defconfig update ARM: LPC32xx: Add MMC controller support ARM: LPC32xx: DTS adjustment for using pl18x primecell ARM: LPC32xx: DT conversion of Standard UARTs ARM: LPC32xx: High Speed UART configuration via DT ARM: LPC32xx: Remove mach specific ARCH_NR_GPIOS, use default arch/arm/Kconfig | 2 arch/arm/boot/dts/ea3250.dts | 157 ++++++++++++++++++++++++++++++ arch/arm/boot/dts/lpc32xx.dtsi | 60 ++++++++--- arch/arm/boot/dts/phy3250.dts | 40 +++++++ arch/arm/configs/lpc32xx_defconfig | 22 +++- arch/arm/mach-lpc32xx/Kconfig | 32 ------ arch/arm/mach-lpc32xx/clock.c | 18 ++- arch/arm/mach-lpc32xx/include/mach/gpio.h | 2 arch/arm/mach-lpc32xx/phy3250.c | 77 +++++++++++++- arch/arm/mach-lpc32xx/serial.c | 85 ---------------- 10 files changed, 343 insertions(+), 152 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/