Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756622Ab2FTMDl (ORCPT ); Wed, 20 Jun 2012 08:03:41 -0400 Received: from mail-gh0-f174.google.com ([209.85.160.174]:33781 "EHLO mail-gh0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755607Ab2FTMDj (ORCPT ); Wed, 20 Jun 2012 08:03:39 -0400 From: Alexandre Pereira da Silva To: Roland Stigge Cc: Alexandre Pereira da Silva , Felipe Balbi , Greg Kroah-Hartman , linux-usb@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH] usb: gadget: lpc32xx_udc: move clock init to clock framework Date: Wed, 20 Jun 2012 09:03:15 -0300 Message-Id: <1340193795-30805-1-git-send-email-aletes.xgr@gmail.com> X-Mailer: git-send-email 1.7.10 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 6882 Lines: 206 Moves clock initialization to the clock framework. Signed-off-by: Alexandre Pereira da Silva --- drivers/usb/gadget/lpc32xx_udc.c | 84 +++++++++++--------------------------- 1 file changed, 24 insertions(+), 60 deletions(-) diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index 262acfd..d227d93 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -164,6 +164,7 @@ struct lpc32xx_udc { int udp_irq[4]; struct clk *usb_pll_clk; struct clk *usb_slv_clk; + struct clk *usb_otg_clk; /* DMA support */ u32 *udca_v_base; @@ -226,33 +227,15 @@ static inline struct lpc32xx_udc *to_udc(struct usb_gadget *g) #define UDCA_BUFF_SIZE (128) /* TODO: When the clock framework is introduced in LPC32xx, IO_ADDRESS will - * be replaced with an inremap()ed pointer, see USB_OTG_CLK_CTRL() + * be replaced with an inremap()ed pointer * */ #define USB_CTRL IO_ADDRESS(LPC32XX_CLK_PM_BASE + 0x64) -#define USB_CLOCK_MASK (AHB_M_CLOCK_ON | OTG_CLOCK_ON | \ - DEV_CLOCK_ON | I2C_CLOCK_ON) /* USB_CTRL bit defines */ #define USB_SLAVE_HCLK_EN (1 << 24) #define USB_HOST_NEED_CLK_EN (1 << 21) #define USB_DEV_NEED_CLK_EN (1 << 22) -#define USB_OTG_CLK_CTRL(udc) ((udc)->udp_baseaddr + 0xFF4) -#define USB_OTG_CLK_STAT(udc) ((udc)->udp_baseaddr + 0xFF8) - -/* USB_OTG_CLK_CTRL bit defines */ -#define AHB_M_CLOCK_ON (1 << 4) -#define OTG_CLOCK_ON (1 << 3) -#define I2C_CLOCK_ON (1 << 2) -#define DEV_CLOCK_ON (1 << 1) -#define HOST_CLOCK_ON (1 << 0) - -#define USB_OTG_STAT_CONTROL(udc) (udc->udp_baseaddr + 0x110) - -/* USB_OTG_STAT_CONTROL bit defines */ -#define TRANSPARENT_I2C_EN (1 << 7) -#define HOST_EN (1 << 0) - /********************************************************************** * USB device controller register offsets **********************************************************************/ @@ -676,7 +659,7 @@ static void isp1301_udc_configure(struct lpc32xx_udc *udc) ISP1301_I2C_INTERRUPT_RISING, INT_VBUS_VLD); /* Enable usb_need_clk clock after transceiver is initialized */ - writel((readl(USB_CTRL) | (1 << 22)), USB_CTRL); + writel((readl(USB_CTRL) | USB_DEV_NEED_CLK_EN), USB_CTRL); dev_info(udc->dev, "ISP1301 Vendor ID : 0x%04x\n", i2c_smbus_read_word_data(udc->isp1301_i2c_client, 0x00)); @@ -1009,11 +992,8 @@ static void udc_dd_free(struct lpc32xx_udc *udc, struct lpc32xx_usbd_dd_gad *dd) /* Enables or disables most of the USB system clocks when low power mode is * needed. Clocks are typically started on a connection event, and disabled * when a cable is disconnected */ -#define OTGOFF_CLK_MASK (AHB_M_CLOCK_ON | I2C_CLOCK_ON) static void udc_clk_set(struct lpc32xx_udc *udc, int enable) { - int to = 1000; - if (enable != 0) { if (udc->clocked) return; @@ -1027,14 +1007,7 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable) writel(readl(USB_CTRL) | USB_DEV_NEED_CLK_EN, USB_CTRL); - /* Set to enable all needed USB OTG clocks */ - writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc)); - - while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) != - USB_CLOCK_MASK) && (to > 0)) - to--; - if (!to) - dev_dbg(udc->dev, "Cannot enable USB OTG clocking\n"); + clk_enable(udc->usb_otg_clk); } else { if (!udc->clocked) return; @@ -1046,19 +1019,11 @@ static void udc_clk_set(struct lpc32xx_udc *udc, int enable) /* 48MHz PLL dpwn */ clk_disable(udc->usb_pll_clk); - /* Enable the USB device clock */ + /* Disable the USB device clock */ writel(readl(USB_CTRL) & ~USB_DEV_NEED_CLK_EN, USB_CTRL); - /* Set to enable all needed USB OTG clocks */ - writel(OTGOFF_CLK_MASK, USB_OTG_CLK_CTRL(udc)); - - while (((readl(USB_OTG_CLK_STAT(udc)) & - OTGOFF_CLK_MASK) != - OTGOFF_CLK_MASK) && (to > 0)) - to--; - if (!to) - dev_dbg(udc->dev, "Cannot disable USB OTG clocking\n"); + clk_disable(udc->usb_otg_clk); } } @@ -3238,6 +3203,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) retval = PTR_ERR(udc->usb_slv_clk); goto usb_clk_get_fail; } + udc->usb_otg_clk = clk_get(&pdev->dev, "ck_usb_otg"); + if (IS_ERR(udc->usb_otg_clk)) { + dev_err(udc->dev, "failed to acquire USB otg clock\n"); + retval = PTR_ERR(udc->usb_slv_clk); + goto usb_otg_clk_get_fail; + } /* Setup PLL clock to 48MHz */ retval = clk_enable(udc->usb_pll_clk); @@ -3261,15 +3232,12 @@ static int __init lpc32xx_udc_probe(struct platform_device *pdev) goto usb_clk_enable_fail; } - /* Set to enable all needed USB OTG clocks */ - writel(USB_CLOCK_MASK, USB_OTG_CLK_CTRL(udc)); - - i = 1000; - while (((readl(USB_OTG_CLK_STAT(udc)) & USB_CLOCK_MASK) != - USB_CLOCK_MASK) && (i > 0)) - i--; - if (!i) - dev_dbg(udc->dev, "USB OTG clocks not correctly enabled\n"); + /* Enable USB OTG clock */ + retval = clk_enable(udc->usb_otg_clk); + if (retval < 0) { + dev_err(udc->dev, "failed to start USB otg clock\n"); + goto usb_otg_clk_enable_fail; + } /* Setup deferred workqueue data */ udc->poweron = udc->pullup = 0; @@ -3389,12 +3357,16 @@ dma_alloc_fail: dma_free_coherent(&pdev->dev, UDCA_BUFF_SIZE, udc->udca_v_base, udc->udca_p_base); i2c_fail: + clk_disable(udc->usb_otg_clk); +usb_otg_clk_enable_fail: clk_disable(udc->usb_slv_clk); usb_clk_enable_fail: pll_set_fail: clk_disable(udc->usb_pll_clk); pll_enable_fail: clk_put(udc->usb_slv_clk); +usb_otg_clk_get_fail: + clk_put(udc->usb_otg_clk); usb_clk_get_fail: clk_put(udc->usb_pll_clk); pll_get_fail: @@ -3432,6 +3404,8 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev) device_unregister(&udc->gadget.dev); + clk_disable(udc->usb_otg_clk); + clk_put(udc->usb_otg_clk); clk_disable(udc->usb_slv_clk); clk_put(udc->usb_slv_clk); clk_disable(udc->usb_pll_clk); @@ -3445,7 +3419,6 @@ static int __devexit lpc32xx_udc_remove(struct platform_device *pdev) #ifdef CONFIG_PM static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg) { - int to = 1000; struct lpc32xx_udc *udc = platform_get_drvdata(pdev); if (udc->clocked) { @@ -3460,15 +3433,6 @@ static int lpc32xx_udc_suspend(struct platform_device *pdev, pm_message_t mesg) on resume */ udc->clocked = 1; - /* Kill OTG and I2C clocks */ - writel(0, USB_OTG_CLK_CTRL(udc)); - while (((readl(USB_OTG_CLK_STAT(udc)) & OTGOFF_CLK_MASK) != - OTGOFF_CLK_MASK) && (to > 0)) - to--; - if (!to) - dev_dbg(udc->dev, - "USB OTG clocks not correctly enabled\n"); - /* Kill global USB clock */ clk_disable(udc->usb_slv_clk); } -- 1.7.10 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/