Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755964Ab2F0BJK (ORCPT ); Tue, 26 Jun 2012 21:09:10 -0400 Received: from mail132.messagelabs.com ([216.82.242.115]:56858 "EHLO mail132.messagelabs.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755438Ab2F0BJI (ORCPT ); Tue, 26 Jun 2012 21:09:08 -0400 X-Env-Sender: hartleys@visionengravers.com X-Msg-Ref: server-8.tower-132.messagelabs.com!1340759346!9744010!3 X-Originating-IP: [216.166.12.99] X-StarScan-Version: 6.5.10; banners=-,-,- X-VirusChecked: Checked From: H Hartley Sweeten To: Linux Kernel Subject: [PATCH 31/36] staging: comedi: cb_pcidas: add whitespace to all the #define's Date: Tue, 26 Jun 2012 18:09:01 -0700 User-Agent: KMail/1.9.9 CC: , , , MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-ID: <201206261809.01777.hartleys@visionengravers.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9322 Lines: 199 Add whitespace to all the #define's in the driver in order to improve the readability. Fix all the comments that are, or already were, > 80 characters. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Frank Mori Hess Cc: Greg Kroah-Hartman --- drivers/staging/comedi/drivers/cb_pcidas.c | 141 +++++++++++++++-------------- 1 file changed, 71 insertions(+), 70 deletions(-) diff --git a/drivers/staging/comedi/drivers/cb_pcidas.c b/drivers/staging/comedi/drivers/cb_pcidas.c index 0188cf1..c0d9340 100644 --- a/drivers/staging/comedi/drivers/cb_pcidas.c +++ b/drivers/staging/comedi/drivers/cb_pcidas.c @@ -81,64 +81,65 @@ analog triggering on 1602 series /* PCI vendor number of ComputerBoards/MeasurementComputing */ #define PCI_VENDOR_ID_CB 0x1307 -#define TIMER_BASE 100 /* 10MHz master clock */ -#define AI_BUFFER_SIZE 1024 /* maximum fifo size of any supported board */ -#define AO_BUFFER_SIZE 1024 /* maximum fifo size of any supported board */ -#define NUM_CHANNELS_8800 8 -#define NUM_CHANNELS_7376 1 -#define NUM_CHANNELS_8402 2 -#define NUM_CHANNELS_DAC08 1 + +#define TIMER_BASE 100 /* 10MHz master clock */ +#define AI_BUFFER_SIZE 1024 /* max ai fifo size */ +#define AO_BUFFER_SIZE 1024 /* max ao fifo size */ +#define NUM_CHANNELS_8800 8 +#define NUM_CHANNELS_7376 1 +#define NUM_CHANNELS_8402 2 +#define NUM_CHANNELS_DAC08 1 /* Control/Status registers */ -#define INT_ADCFIFO 0 /* INTERRUPT / ADC FIFO register */ -#define INT_EOS 0x1 /* interrupt end of scan */ -#define INT_FHF 0x2 /* interrupt fifo half full */ -#define INT_FNE 0x3 /* interrupt fifo not empty */ -#define INT_MASK 0x3 /* mask of interrupt select bits */ -#define INTE 0x4 /* interrupt enable */ -#define DAHFIE 0x8 /* dac half full interrupt enable */ -#define EOAIE 0x10 /* end of acquisition interrupt enable */ -#define DAHFI 0x20 /* dac half full read status / write interrupt clear */ -#define EOAI 0x40 /* read end of acq. interrupt status / write clear */ -#define INT 0x80 /* read interrupt status / write clear */ -#define EOBI 0x200 /* read end of burst interrupt status */ -#define ADHFI 0x400 /* read half-full interrupt status */ -#define ADNEI 0x800 /* read fifo not empty interrupt latch status */ -#define ADNE 0x1000 /* read, fifo not empty (realtime, not latched) status */ -#define DAEMIE 0x1000 /* write, dac empty interrupt enable */ -#define LADFUL 0x2000 /* read fifo overflow / write clear */ -#define DAEMI 0x4000 /* dac fifo empty interrupt status / write clear */ - -#define ADCMUX_CONT 2 /* ADC CHANNEL MUX AND CONTROL register */ -#define BEGIN_SCAN(x) ((x) & 0xf) -#define END_SCAN(x) (((x) & 0xf) << 4) -#define GAIN_BITS(x) (((x) & 0x3) << 8) -#define UNIP 0x800 /* Analog front-end unipolar for range */ -#define SE 0x400 /* Inputs in single-ended mode */ -#define PACER_MASK 0x3000 /* pacer source bits */ -#define PACER_INT 0x1000 /* internal pacer */ -#define PACER_EXT_FALL 0x2000 /* external falling edge */ -#define PACER_EXT_RISE 0x3000 /* external rising edge */ -#define EOC 0x4000 /* adc not busy */ - -#define TRIG_CONTSTAT 4 /* TRIGGER CONTROL/STATUS register */ -#define SW_TRIGGER 0x1 /* software start trigger */ -#define EXT_TRIGGER 0x2 /* external start trigger */ -#define ANALOG_TRIGGER 0x3 /* external analog trigger */ -#define TRIGGER_MASK 0x3 /* mask of bits that determine start trigger */ -#define TGPOL 0x04 /* invert the edge/level of the external trigger (1602 only) */ -#define TGSEL 0x08 /* if set edge triggered, otherwise level trigerred (1602 only) */ -#define TGEN 0x10 /* enable external start trigger */ -#define BURSTE 0x20 /* burst mode enable */ -#define XTRCL 0x80 /* clear external trigger */ - -#define CALIBRATION_REG 6 /* CALIBRATION register */ -#define SELECT_8800_BIT 0x100 /* select 8800 caldac */ -#define SELECT_TRIMPOT_BIT 0x200 /* select ad7376 trim pot */ -#define SELECT_DAC08_BIT 0x400 /* select dac08 caldac */ +#define INT_ADCFIFO 0 /* INTERRUPT / ADC FIFO register */ +#define INT_EOS 0x1 /* int end of scan */ +#define INT_FHF 0x2 /* int fifo half full */ +#define INT_FNE 0x3 /* int fifo not empty */ +#define INT_MASK 0x3 /* mask of int select bits */ +#define INTE 0x4 /* int enable */ +#define DAHFIE 0x8 /* dac half full int enable */ +#define EOAIE 0x10 /* end of acq. int enable */ +#define DAHFI 0x20 /* dac half full status / clear */ +#define EOAI 0x40 /* end of acq. int status / clear */ +#define INT 0x80 /* int status / clear */ +#define EOBI 0x200 /* end of burst int status */ +#define ADHFI 0x400 /* half-full int status */ +#define ADNEI 0x800 /* fifo not empty int status (latch) */ +#define ADNE 0x1000 /* fifo not empty status (realtime) */ +#define DAEMIE 0x1000 /* dac empty int enable */ +#define LADFUL 0x2000 /* fifo overflow / clear */ +#define DAEMI 0x4000 /* dac fifo empty int status / clear */ + +#define ADCMUX_CONT 2 /* ADC CHANNEL MUX AND CONTROL reg */ +#define BEGIN_SCAN(x) ((x) & 0xf) +#define END_SCAN(x) (((x) & 0xf) << 4) +#define GAIN_BITS(x) (((x) & 0x3) << 8) +#define UNIP 0x800 /* Analog front-end unipolar mode */ +#define SE 0x400 /* Inputs in single-ended mode */ +#define PACER_MASK 0x3000 /* pacer source bits */ +#define PACER_INT 0x1000 /* int. pacer */ +#define PACER_EXT_FALL 0x2000 /* ext. falling edge */ +#define PACER_EXT_RISE 0x3000 /* ext. rising edge */ +#define EOC 0x4000 /* adc not busy */ + +#define TRIG_CONTSTAT 4 /* TRIGGER CONTROL/STATUS register */ +#define SW_TRIGGER 0x1 /* software start trigger */ +#define EXT_TRIGGER 0x2 /* ext. start trigger */ +#define ANALOG_TRIGGER 0x3 /* ext. analog trigger */ +#define TRIGGER_MASK 0x3 /* start trigger mask */ +#define TGPOL 0x04 /* invert trigger (1602 only) */ +#define TGSEL 0x08 /* edge/level trigerred (1602 only) */ +#define TGEN 0x10 /* enable external start trigger */ +#define BURSTE 0x20 /* burst mode enable */ +#define XTRCL 0x80 /* clear external trigger */ + +#define CALIBRATION_REG 6 /* CALIBRATION register */ +#define SELECT_8800_BIT 0x100 /* select 8800 caldac */ +#define SELECT_TRIMPOT_BIT 0x200 /* select ad7376 trim pot */ +#define SELECT_DAC08_BIT 0x400 /* select dac08 caldac */ #define CAL_SRC_BITS(x) (((x) & 0x7) << 11) -#define CAL_EN_BIT 0x4000 /* read calibration source instead of analog input channel 0 */ -#define SERIAL_DATA_IN_BIT 0x8000 /* serial data stream going to 8800 and 7376 */ +#define CAL_EN_BIT 0x4000 /* calibration source enable */ +#define SERIAL_DATA_IN_BIT 0x8000 /* serial data bit going to caldac */ #define DAC_CSR 0x8 /* dac control and status register */ #define DACEN 0x02 /* dac enable */ @@ -155,12 +156,12 @@ static inline unsigned int DAC_RANGE_MASK(unsigned int channel) }; /* bits for 1602 series only */ -#define DAC_EMPTY 0x1 /* fifo empty, read, write clear */ -#define DAC_START 0x4 /* start/arm fifo operations */ -#define DAC_PACER_MASK 0x18 /* bits that set pacer source */ -#define DAC_PACER_INT 0x8 /* int. pacing */ -#define DAC_PACER_EXT_FALL 0x10 /* ext. pacing, falling edge */ -#define DAC_PACER_EXT_RISE 0x18 /* ext. pacing, rising edge */ +#define DAC_EMPTY 0x1 /* fifo empty, read, write clear */ +#define DAC_START 0x4 /* start/arm fifo operations */ +#define DAC_PACER_MASK 0x18 /* bits that set pacer source */ +#define DAC_PACER_INT 0x8 /* int. pacing */ +#define DAC_PACER_EXT_FALL 0x10 /* ext. pacing, falling edge */ +#define DAC_PACER_EXT_RISE 0x18 /* ext. pacing, rising edge */ static inline unsigned int DAC_CHAN_EN(unsigned int channel) { @@ -168,13 +169,13 @@ static inline unsigned int DAC_CHAN_EN(unsigned int channel) }; /* analog input fifo */ -#define ADCDATA 0 /* ADC DATA register */ -#define ADCFIFOCLR 2 /* ADC FIFO CLEAR */ +#define ADCDATA 0 /* ADC DATA register */ +#define ADCFIFOCLR 2 /* ADC FIFO CLEAR */ /* pacer, counter, dio registers */ -#define ADC8254 0 -#define DIO_8255 4 -#define DAC8254 8 +#define ADC8254 0 +#define DIO_8255 4 +#define DAC8254 8 /* analog output registers for 100x, 1200 series */ static inline unsigned int DAC_DATA_REG(unsigned int channel) @@ -183,11 +184,11 @@ static inline unsigned int DAC_DATA_REG(unsigned int channel) } /* analog output registers for 1602 series*/ -#define DACDATA 0 /* DAC DATA register */ -#define DACFIFOCLR 2 /* DAC FIFO CLEAR */ +#define DACDATA 0 /* DAC DATA register */ +#define DACFIFOCLR 2 /* DAC FIFO CLEAR */ + +#define IS_UNIPOLAR 0x4 /* unipolar range mask */ -/* bit in hexadecimal representation of range index that indicates unipolar input range */ -#define IS_UNIPOLAR 0x4 /* analog input ranges for most boards */ static const struct comedi_lrange cb_pcidas_ranges = { 8, -- 1.7.11 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/