Message-ID: <501AE71A.80903@gmx.de>
Date: Thu, 02 Aug 2012 20:46:18 +0000
From: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
User-Agent: Mozilla/5.0 (X11; U; Linux x86_64; en-US; rv:1.9.1.16) Gecko/20120613 Icedove/3.0.11
MIME-Version: 1.0
To: Ondrej Zary <linux@rainbow-software.org>
CC: linux-fbdev@vger.kernel.org,
        Kernel development list <linux-kernel@vger.kernel.org>
Subject: Re: viafb on Clevo M5x0V laptop (+VT1631L)
References: <201208022003.28404.linux@rainbow-software.org>
In-Reply-To: <201208022003.28404.linux@rainbow-software.org>
Content-Type: text/plain; charset=ISO-8859-1
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 4343
Lines: 101

Hi Ondrej,

On 08/02/2012 06:03 PM, Ondrej Zary wrote:
> Hello,
> I've got a Clevo M5x0V laptop which has VIA PM800 chipset (1106:3118) and 
> 1280x768 LCD panel connected using VT1631L LVDS transmitter. There's a 
> schematic of this laptop available on the web which shows that VT1631L's I2C 
> port is not connected anywhere...
> 
> viafb does not work properly - LCD panel (and backlight) is turned off upon 
> module load and there's 640x480 signal on VGA connector (even when monitor 
> was not connected during module load).

Yes, that's the default (640x480-60 on the VGA output) that VIA selected
when they wrote the module. I tried to add some auto detect mechanism,
but I guess in your case it wouldn't help, even if it were complete. The
traditional way to use viafb is via module parameters as described in
Documentation/fb/viafb.txt
In your case something like this might work:
viafb_mode=1280x768 viafb_lcd_panel_id=3 viafb_active_dev=LCD
Additionally it might be required to add viafb_lcd_port with any of
DVP0, DVP1, DFP_HIGHLOW, DFP_HIGH, DFP_LOW.

> Looking at the code, there's almost nothing for VT1631. What needs to be done 
> in order for the LCD to work? Xorg seems to work using openchrome (but it is 
> not able to restore the card on resume from S3):
> (II) CHROME(0): Unable to get panel size from EDID. Return code: 0
> (II) CHROME(0): ViaPanelGetNativeModeFromScratchPad
> (II) CHROME(0): Native Panel Resolution is 1280x768

Interesting that they get the panel resolution from the scratch pad. The
official documentation does not contain any useful information about it
(and openchrome didn't work on any of my LCD devices that I tested,
hence I didn't care whether they did have any code in that area)
Maybe the above module parameters will help you, otherwise more
investigation will be required.


Best regards,

Florian Tobias Schandinat


> 
> 
> This is from kernel 3.5 with VIAFB_DEBUG and VIAFB_WARN enabled:
> 
> [  153.051061] VIA Graphics Integration Chipset framebuffer 2.4 initializing
> [  153.051765] viafb 0000:01:00.0: power state changed by ACPI to D0
> [  153.051773] viafb 0000:01:00.0: power state changed by ACPI to D0
> [  153.053535] Device ID = 3259
> [  153.053553] FB Size = 4000
> [  153.059984] VIAFB PCI Probe!!
> [  153.060044] viafb: Probing I2C bus 0x26
> [  153.092761] viafb: Probing I2C bus 0x31
> [  155.588019] viafb: Probing I2C bus 0x2C
> [  155.619016] viafb: Finished I2C bus probing
> [  155.619021] parse_lcd_port: viafb_lcd_port:,interface:0
> [  155.619023] parse_dvi_port: viafb_dvi_port:,interface:0
> [  155.713224] TMDS Chip = 0
> [  155.713227] viafb_init_dvi_size()
> [  155.713229] viafb_dvi_sense!!
> [  155.714415] viafb_dvi_query_EDID!!
> [  155.716820] viafb_dvi_query_EDID!!
> [  155.719179] viafb_lvds_identify_vt1636.
> [  155.812018] viafb_lvds_identify_vt1636.
> [  155.814383] viafb_init_lcd_size()
> [  155.814384] fp_get_panel_id()
> [  155.814387] LVDS Chip = 0
> [  155.814389] LVDS1 output_interface = 6
> [  155.814391] LVDS2 output_interface = 6
> [  155.814405] viafb_check_var!
> [  155.815250] fbcon: Via (fb0) is primary device
> [  155.815257] viafb_open!
> [  155.818608] viafb_set_par!
> [  155.818720] via_set_primary_pitch(0x00000A00)
> [  155.818723] via_set_secondary_pitch(0x00000A00)
> [  155.818727] via_set_primary_color_depth(24)
> [  155.818730] via_set_secondary_color_depth(24)
> [  155.818788] viafb_pan_display, address = 0
> [  155.818789] via_set_primary_address(0x00000000)
> [  155.818793] via_set_secondary_address(0x00000000)
> [  155.819020] viafb_pan_display, address = 0
> [  155.819021] via_set_primary_address(0x00000000)
> [  155.819025] via_set_secondary_address(0x00000000)
> [  155.819044] viafb 2D engine: imageblit
> ...many imageblits...
> [  155.826516] Console: switching to colour frame buffer device 80x30
> [  155.826522] viafb_pan_display, address = 0
> [  155.826523] via_set_primary_address(0x00000000)
> [  155.826527] via_set_secondary_address(0x00000000)
> ...many imageblits...
> [  155.833889] fb0: Via frame buffer device 640x480-32bpp
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/