Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752847Ab2HCRK5 (ORCPT ); Fri, 3 Aug 2012 13:10:57 -0400 Received: from mail132.messagelabs.com ([216.82.242.115]:22971 "EHLO mail132.messagelabs.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751470Ab2HCRKz (ORCPT ); Fri, 3 Aug 2012 13:10:55 -0400 X-Env-Sender: hartleys@visionengravers.com X-Msg-Ref: server-7.tower-132.messagelabs.com!1344013839!10474750!36 X-Originating-IP: [216.166.12.32] X-StarScan-Received: X-StarScan-Version: 6.6.1.2; banners=-,-,- X-VirusChecked: Checked From: H Hartley Sweeten To: Linux Kernel Subject: [PATCH 1/2] staging: comedi: new adl_pci7x3x driver Date: Fri, 3 Aug 2012 10:10:41 -0700 User-Agent: KMail/1.9.9 CC: , , MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Content-Disposition: inline Message-ID: <201208031010.42002.hartleys@visionengravers.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 12631 Lines: 413 Currently the ADLink PCI-7230 and PCI-7432 Isolated Digital I/O Boards are supported using two drivers (adl_pci7230 and adl_pci7432). These drivers are very similar and only differ in the total number of di/do channels provided. This combines the support for both boards into one common driver. In addition, it adds PCI PnP support for the other boards in the ADLink PCI-723x and PCI-743x series. This driver only supports the comedi PCI auto config attach mechanism. The legacy attach using the comedi_config utility is not supported or required by this driver. Signed-off-by: H Hartley Sweeten Cc: Ian Abbott Cc: Greg Kroah-Hartman --- drivers/staging/comedi/Kconfig | 11 + drivers/staging/comedi/drivers/Makefile | 1 + drivers/staging/comedi/drivers/adl_pci7x3x.c | 342 +++++++++++++++++++++++++++ 3 files changed, 354 insertions(+) create mode 100644 drivers/staging/comedi/drivers/adl_pci7x3x.c diff --git a/drivers/staging/comedi/Kconfig b/drivers/staging/comedi/Kconfig index 6cee785..d8b0065 100644 --- a/drivers/staging/comedi/Kconfig +++ b/drivers/staging/comedi/Kconfig @@ -676,6 +676,17 @@ config COMEDI_ADL_PCI6208 To compile this driver as a module, choose M here: the module will be called adl_pci6208. +config COMEDI_ADL_PCI7X3X + tristate "ADLink PCI-723X/743X isolated digital i/o board support" + ---help--- + Enable support for ADlink PCI-723X/743X isolated digital i/o boards. + Supported boards include the 32-channel PCI-7230 (16 in/16 out), + PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel + PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out). + + To compile this driver as a module, choose M here: the module will be + called adl_pci7x3x. + config COMEDI_ADL_PCI7230 tristate "ADLink PCI-7230 digital io board support" ---help--- diff --git a/drivers/staging/comedi/drivers/Makefile b/drivers/staging/comedi/drivers/Makefile index 57b19e4..d13d5a9 100644 --- a/drivers/staging/comedi/drivers/Makefile +++ b/drivers/staging/comedi/drivers/Makefile @@ -69,6 +69,7 @@ obj-$(CONFIG_COMEDI_ADDI_APCI_3120) += addi_apci_3120.o obj-$(CONFIG_COMEDI_ADDI_APCI_3501) += addi_apci_3501.o obj-$(CONFIG_COMEDI_ADDI_APCI_3XXX) += addi_apci_3xxx.o obj-$(CONFIG_COMEDI_ADL_PCI6208) += adl_pci6208.o +obj-$(CONFIG_COMEDI_ADL_PCI7X3X) += adl_pci7x3x.o obj-$(CONFIG_COMEDI_ADL_PCI7230) += adl_pci7230.o obj-$(CONFIG_COMEDI_ADL_PCI7296) += adl_pci7296.o obj-$(CONFIG_COMEDI_ADL_PCI7432) += adl_pci7432.o diff --git a/drivers/staging/comedi/drivers/adl_pci7x3x.c b/drivers/staging/comedi/drivers/adl_pci7x3x.c new file mode 100644 index 0000000..990670a --- /dev/null +++ b/drivers/staging/comedi/drivers/adl_pci7x3x.c @@ -0,0 +1,342 @@ +/* + * COMEDI driver for the ADLINK PCI-723x/743x series boards. + * Copyright (C) 2012 H Hartley Sweeten + * + * Based on the adl_pci7230 driver written by: + * David Fernandez + * and the adl_pci7432 driver written by: + * Michel Lachaine + * + * COMEDI - Linux Control and Measurement Device Interface + * Copyright (C) 2000 David A. Schleef + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* +Driver: adl_pci7x3x +Description: 32/64-Channel Isolated Digital I/O Boards +Devices: (ADLink) PCI-7230 [adl_pci7230] - 16 input / 16 output + (ADLink) PCI-7233 [adl_pci7233] - 32 input + (ADLink) PCI-7234 [adl_pci7234] - 32 output + (ADLink) PCI-7432 [adl_pci7432] - 32 input / 32 output + (ADLink) PCI-7433 [adl_pci7433] - 64 input + (ADLink) PCI-7434 [adl_pci7434] - 64 output +Author: H Hartley Sweeten +Updated: Thu, 02 Aug 2012 14:27:46 -0700 +Status: untested + +This driver only attaches using the PCI PnP auto config support +in the comedi core. The module parameter 'comedi_autoconfig' +must be 1 (default) to enable this feature. The COMEDI_DEVCONFIG +ioctl, used by the comedi_config utility, is not supported by +this driver. + +The PCI-7230, PCI-7432 and PCI-7433 boards also support external +interrupt signals on digital input channels 0 and 1. The PCI-7233 +has dual-interrupt sources for change-of-state (COS) on any 16 +digital input channels of LSB and for COS on any 16 digital input +lines of MSB. Interrupts are not currently supported by this +driver. + +Configuration Options: not applicable +*/ + +#include "../comedidev.h" + +/* + * PCI Device ID's supported by this driver + */ +#define PCI_DEVICE_ID_PCI7230 0x7230 +#define PCI_DEVICE_ID_PCI7233 0x7233 +#define PCI_DEVICE_ID_PCI7234 0x7234 +#define PCI_DEVICE_ID_PCI7432 0x7432 +#define PCI_DEVICE_ID_PCI7433 0x7433 +#define PCI_DEVICE_ID_PCI7434 0x7434 + +/* + * Register I/O map (32-bit access only) + */ +#define PCI7X3X_DIO_REG 0x00 +#define PCI743X_DIO_REG 0x04 + +struct adl_pci7x3x_boardinfo { + const char *name; + unsigned short device; + int nsubdevs; + int di_nchan; + int do_nchan; +}; + +static const struct adl_pci7x3x_boardinfo adl_pci7x3x_boards[] = { + { + .name = "adl_pci7230", + .device = PCI_DEVICE_ID_PCI7230, + .nsubdevs = 2, + .di_nchan = 16, + .do_nchan = 16, + }, { + .name = "adl_pci7233", + .device = PCI_DEVICE_ID_PCI7233, + .nsubdevs = 1, + .di_nchan = 32, + }, { + .name = "adl_pci7234", + .device = PCI_DEVICE_ID_PCI7234, + .nsubdevs = 1, + .do_nchan = 32, + }, { + .name = "adl_pci7432", + .device = PCI_DEVICE_ID_PCI7432, + .nsubdevs = 2, + .di_nchan = 32, + .do_nchan = 32, + }, { + .name = "adl_pci7433", + .device = PCI_DEVICE_ID_PCI7433, + .nsubdevs = 2, + .di_nchan = 64, + }, { + .name = "adl_pci7434", + .device = PCI_DEVICE_ID_PCI7434, + .nsubdevs = 2, + .do_nchan = 64, + } +}; + +static int adl_pci7x3x_do_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + unsigned int reg = (unsigned int)s->private; + unsigned int mask = data[0]; + unsigned int bits = data[1]; + + if (mask) { + s->state &= ~mask; + s->state |= (bits & mask); + + outl(s->state, dev->iobase + reg); + } + + /* + * NOTE: The output register is not readable. + * This returned state will not be correct until all the + * outputs have been updated. + */ + data[1] = s->state; + + return insn->n; +} + +static int adl_pci7x3x_di_insn_bits(struct comedi_device *dev, + struct comedi_subdevice *s, + struct comedi_insn *insn, + unsigned int *data) +{ + unsigned int reg = (unsigned int)s->private; + + data[1] = inl(dev->iobase + reg); + + return insn->n; +} + +static const void *adl_pci7x3x_find_boardinfo(struct comedi_device *dev, + struct pci_dev *pcidev) +{ + const struct adl_pci7x3x_boardinfo *board; + int i; + + for (i = 0; i < ARRAY_SIZE(adl_pci7x3x_boards); i++) { + board = &adl_pci7x3x_boards[i]; + if (pcidev->device == board->device) + return board; + } + return NULL; +} + +static int adl_pci7x3x_attach_pci(struct comedi_device *dev, + struct pci_dev *pcidev) +{ + const struct adl_pci7x3x_boardinfo *board; + struct comedi_subdevice *s; + int subdev; + int nchan; + int ret; + + comedi_set_hw_dev(dev, &pcidev->dev); + + board = adl_pci7x3x_find_boardinfo(dev, pcidev); + if (!board) + return -ENODEV; + dev->board_ptr = board; + dev->board_name = board->name; + + ret = comedi_pci_enable(pcidev, dev->board_name); + if (ret) + return ret; + dev->iobase = pci_resource_start(pcidev, 2); + + /* + * One or two subdevices are setup by this driver depending on + * the number of digital inputs and/or outputs provided by the + * board. Each subdevice has a maximum of 32 channels. + * + * PCI-7230 - 2 subdevices: 0 - 16 input, 1 - 16 output + * PCI-7233 - 1 subdevice: 0 - 32 input + * PCI-7234 - 1 subdevice: 0 - 32 output + * PCI-7432 - 2 subdevices: 0 - 32 input, 1 - 32 output + * PCI-7433 - 2 subdevices: 0 - 32 input, 1 - 32 input + * PCI-7434 - 2 subdevices: 0 - 32 output, 1 - 32 output + */ + ret = comedi_alloc_subdevices(dev, board->nsubdevs); + if (ret) + return ret; + + subdev = 0; + + if (board->di_nchan) { + nchan = min(board->di_nchan, 32); + + s = dev->subdevices + subdev; + /* Isolated digital inputs 0 to 15/31 */ + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE; + s->n_chan = nchan; + s->maxdata = 1; + s->insn_bits = adl_pci7x3x_di_insn_bits; + s->range_table = &range_digital; + + s->private = (void *)PCI7X3X_DIO_REG; + + subdev++; + + nchan = board->di_nchan - nchan; + if (nchan) { + s = dev->subdevices + subdev; + /* Isolated digital inputs 32 to 63 */ + s->type = COMEDI_SUBD_DI; + s->subdev_flags = SDF_READABLE; + s->n_chan = nchan; + s->maxdata = 1; + s->insn_bits = adl_pci7x3x_di_insn_bits; + s->range_table = &range_digital; + + s->private = (void *)PCI743X_DIO_REG; + + subdev++; + } + } + + if (board->do_nchan) { + nchan = min(board->do_nchan, 32); + + s = dev->subdevices + subdev; + /* Isolated digital outputs 0 to 15/31 */ + s->type = COMEDI_SUBD_DO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = nchan; + s->maxdata = 1; + s->insn_bits = adl_pci7x3x_do_insn_bits; + s->range_table = &range_digital; + + s->private = (void *)PCI7X3X_DIO_REG; + + subdev++; + + nchan = board->do_nchan - nchan; + if (nchan) { + s = dev->subdevices + subdev; + /* Isolated digital outputs 32 to 63 */ + s->type = COMEDI_SUBD_DO; + s->subdev_flags = SDF_WRITABLE; + s->n_chan = nchan; + s->maxdata = 1; + s->insn_bits = adl_pci7x3x_do_insn_bits; + s->range_table = &range_digital; + + s->private = (void *)PCI743X_DIO_REG; + + subdev++; + } + } + + dev_info(dev->class_dev, "%s attached (%d inputs/%d outputs)\n", + dev->board_name, board->di_nchan, board->do_nchan); + + return 0; +} + +static int adl_pci7x3x_attach(struct comedi_device *dev, + struct comedi_devconfig *it) +{ + dev_warn(dev->class_dev, + "This driver does not support attach using comedi_config\n"); + + return -ENOSYS; +} + +static void adl_pci7x3x_detach(struct comedi_device *dev) +{ + struct pci_dev *pcidev = comedi_to_pci_dev(dev); + + if (pcidev) { + if (dev->iobase) + comedi_pci_disable(pcidev); + } +} + +static struct comedi_driver adl_pci7x3x_driver = { + .driver_name = "adl_pci7x3x", + .module = THIS_MODULE, + .attach = adl_pci7x3x_attach, + .attach_pci = adl_pci7x3x_attach_pci, + .detach = adl_pci7x3x_detach, +}; + +static int __devinit adl_pci7x3x_pci_probe(struct pci_dev *dev, + const struct pci_device_id *ent) +{ + return comedi_pci_auto_config(dev, &adl_pci7x3x_driver); +} + +static void __devexit adl_pci7x3x_pci_remove(struct pci_dev *dev) +{ + comedi_pci_auto_unconfig(dev); +} + +static DEFINE_PCI_DEVICE_TABLE(adl_pci7x3x_pci_table) = { + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7230) }, + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7233) }, + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7234) }, + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7432) }, + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7433) }, + { PCI_DEVICE(PCI_VENDOR_ID_ADLINK, PCI_DEVICE_ID_PCI7434) }, + { 0 } +}; +MODULE_DEVICE_TABLE(pci, adl_pci7x3x_pci_table); + +static struct pci_driver adl_pci7x3x_pci_driver = { + .name = "adl_pci7x3x", + .id_table = adl_pci7x3x_pci_table, + .probe = adl_pci7x3x_pci_probe, + .remove = __devexit_p(adl_pci7x3x_pci_remove), +}; +module_comedi_pci_driver(adl_pci7x3x_driver, adl_pci7x3x_pci_driver); + +MODULE_DESCRIPTION("ADLINK PCI-723x/743x Isolated Digital I/O boards"); +MODULE_AUTHOR("H Hartley Sweeten "); +MODULE_LICENSE("GPL"); -- 1.7.11 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/