From: Jingoo Han <jg1.han@samsung.com>
To: "'Sachin Kamat'" <sachin.kamat@linaro.org>
Cc: "'Andrew Morton'" <akpm@linux-foundation.org>,
        "'LKML'" <linux-kernel@vger.kernel.org>,
        "'Richard Purdie'" <rpurdie@rpsys.net>,
        "'Ashish Jangam'" <ashish.jangam@kpitcummins.com>,
        "'Jingoo Han'" <jg1.han@samsung.com>
References: <002c01cd738e$14a880b0$3df98210$%han@samsung.com>
 <CAK9yfHyw=6-e28mHrhyhTuC2uykeqQzpsGRfXcWmcaON=NvcPw@mail.gmail.com>
In-reply-to: <CAK9yfHyw=6-e28mHrhyhTuC2uykeqQzpsGRfXcWmcaON=NvcPw@mail.gmail.com>
Subject: Re: [PATCH 1/3] backlight: da9052: Use usleep_range() instead of
 msleep() for small sleeps
Date: Mon, 06 Aug 2012 13:59:38 +0900
Message-id: <002f01cd7390$4873b5c0$d95b2140$%han@samsung.com>
MIME-version: 1.0
Content-type: text/plain; charset=US-ASCII
Content-transfer-encoding: 7bit
Thread-index: Ac1zjqJaz9epAlLWSUWGm/wzhCYkHgAASUBA
Content-language: ko
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1794
Lines: 59

On Monday, August 06, 2012 1:48 PM Sachin Kamat wrote:
> 
> Hi Jingoo,
> 
> On 6 August 2012 10:13, Jingoo Han <jg1.han@samsung.com> wrote:
> > Since msleep might not sleep for the desired amount when less
> > than 20ms, use usleep_range.
> >
> > Cc: Ashish Jangam <ashish.jangam@kpitcummins.com>
> > Cc: Richard Purdie <rpurdie@rpsys.net>
> > Signed-off-by: Jingoo Han <jg1.han@samsung.com>
> > ---
> >  drivers/video/backlight/da9052_bl.c |    2 +-
> >  1 files changed, 1 insertions(+), 1 deletions(-)
> >
> > diff --git a/drivers/video/backlight/da9052_bl.c b/drivers/video/backlight/da9052_bl.c
> > index b628d68..10485c9 100644
> > --- a/drivers/video/backlight/da9052_bl.c
> > +++ b/drivers/video/backlight/da9052_bl.c
> > @@ -72,7 +72,7 @@ static int da9052_adjust_wled_brightness(struct da9052_bl *wleds)
> >         if (ret < 0)
> >                 return ret;
> >
> > -       msleep(10);
> > +       usleep_range(10000, 11000);
> 
> Can't we just use usleep(10000) instead?


usleep() is not available.
For more details, refer to Documentation/timers/timers-howto.txt.


> 
> 
> >
> >         if (wleds->brightness) {
> >                 ret = da9052_reg_write(wleds->da9052, wled_bank[wleds->led_reg],
> > --
> > 1.7.1
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html
> > Please read the FAQ at  http://www.tux.org/lkml/
> 
> 
> 
> --
> With warm regards,
> Sachin

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/