Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757184Ab2HVGC1 (ORCPT ); Wed, 22 Aug 2012 02:02:27 -0400 Received: from mail-ob0-f174.google.com ([209.85.214.174]:45128 "EHLO mail-ob0-f174.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756831Ab2HVGCY (ORCPT ); Wed, 22 Aug 2012 02:02:24 -0400 MIME-Version: 1.0 In-Reply-To: <1344451432-30735-1-git-send-email-linz@li-pro.net> References: <1344451432-30735-1-git-send-email-linz@li-pro.net> Date: Wed, 22 Aug 2012 16:02:23 +1000 Message-ID: Subject: Re: [PATCH v2] microblaze: improve failure handling for GPIO reset From: Peter Crosthwaite To: Stephan Linz Cc: monstr@monstr.eu, microblaze-uclinux@itee.uq.edu.au, linux-kernel@vger.kernel.org Content-Type: text/plain; charset=ISO-8859-1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2714 Lines: 67 On Thu, Aug 9, 2012 at 4:43 AM, Stephan Linz wrote: > Early exit from of_platform_reset_gpio_probe() if there > was no GPIO reset line configured. > > Avoid kernel oops in gpio_system_reset(): > > [ 96.603690] Restarting system. > [ 96.606094] Machine restart... > [ 96.608810] Oops: kernel access of bad area, sig: 11 > [ 96.613662] Registers dump: mode=824C1D1C > [ 96.617858] r1=C000BB0C, r2=00000000, r3=FFFFFEF8, r4=000015B4 > [ 96.623736] r5=C0276270, r6=00000001, r7=FFFFFFFF, r8=000015B4 > [ 96.629597] r9=000015B3, r10=000015B4, r11=00000000, r12=00000000 > [ 96.635733] r13=00000000, r14=0000000F, r15=C0002B04, r16=00000000 > [ 96.641973] r17=C011E1A0, r18=80000115, r19=00000010, r20=48184ED8 > [ 96.648184] r21=00000000, r22=FFFFFFEA, r23=00000001, r24=FEE1DEAD > [ 96.654396] r25=00000054, r26=1000B1C8, r27=00000000, r28=00000000 > [ 96.660622] r29=00000000, r30=00000000, r31=C24A97E0, rPC=C011E1A0 > [ 96.666849] msr=000042A2, ear=0000004C, esr=00000872, fsr=362E3639 > > Signed-off-by: Stephan Linz Tested-by: Peter Crosthwaite > --- > v2 Remove additional printk message from machine_restart() > --- > arch/microblaze/kernel/reset.c | 6 +++++- > 1 files changed, 5 insertions(+), 1 deletions(-) > > diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c > index 8d663d9..c021123 100644 > --- a/arch/microblaze/kernel/reset.c > +++ b/arch/microblaze/kernel/reset.c > @@ -28,6 +28,7 @@ void of_platform_reset_gpio_probe(void) > if (!gpio_is_valid(handle)) { > printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n", > handle, "reset"); > + return; > } > > ret = gpio_request(handle, "reset"); > @@ -60,7 +61,10 @@ err: > > static void gpio_system_reset(void) > { > - gpio_set_value(handle, 1 - reset_val); > + if (gpio_is_valid(handle)) > + gpio_set_value(handle, 1 - reset_val); > + else > + printk(KERN_NOTICE "Reset GPIO unavailable - halting!\n"); > } > #else > static void gpio_system_reset(void) > -- > 1.7.0.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/